scholarly journals Enhanced control of self-doping in halide perovskites for improved thermoelectric performance

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Tianjun Liu ◽  
Xiaoming Zhao ◽  
Jianwei Li ◽  
Zilu Liu ◽  
Fabiola Liscio ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Surface Layer ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Sacrificial Layer ◽  
Fine Tuning ◽  
Photovoltaic Materials ◽  
Chlorine Doping ◽  
Halide Perovskites ◽  
Transport Region

AbstractMetal halide perovskites have emerged as promising photovoltaic materials, but, despite ultralow thermal conductivity, progress on developing them for thermoelectrics has been limited. Here, we report the thermoelectric properties of all-inorganic tin based perovskites with enhanced air stability. Fine tuning the thermoelectric properties of the films is achieved by self-doping through the oxidation of tin (ΙΙ) to tin (ΙV) in a thin surface-layer that transfers charge to the bulk. This separates the doping defects from the transport region, enabling enhanced electrical conductivity. We show that this arises due to a chlorine-rich surface layer that acts simultaneously as the source of free charges and a sacrificial layer protecting the bulk from oxidation. Moreover, we achieve a figure-of-merit (ZT) of 0.14 ± 0.01 when chlorine-doping and degree of the oxidation are optimised in tandem.

Influence of multi-sintering on the thermoelectric properties of Bi2Sr2Co2Oy ceramics

2019 ◽  
Vol 34 (02) ◽  
pp. 2050019 ◽  
Author(s):  
Y. Zhang ◽  
M. M. Fan ◽  
C. C. Ruan ◽  
Y. W. Zhang ◽  
X.-J. Li ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Phonon Scattering ◽  
Sintered Sample ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
The Third ◽  
Ceramic Samples ◽  
Optimum Formula

[Formula: see text] ceramic samples have a structure similar to phonon glass electronic crystals, and their thermoelectric properties can be effectively adjusted through repeated grinding and sintering. The results show that multi-sintering can make their grain refined and increase their grain boundary, which will effectively increase density and phonon scattering. Finally, multi-sintering can reduce the resistivity and thermal conductivity, thus obviously improve thermoelectric figure of merit [Formula: see text] of [Formula: see text]. The optimum [Formula: see text] value of 0.26 is achieved at 923 K by the third sintered sample.

Effects of Ce filling fraction and Fe content on the thermoelectric properties of Co-rich CeyFexCo4−xSb12

2001 ◽  
Vol 16 (3) ◽  
pp. 837-843 ◽  
Author(s):  
Xinfeng Tang ◽  
Lidong Chen ◽  
Takashi Goto ◽  
Toshio Hirai
Keyword(s):  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Single Phase ◽  
Lattice Thermal Conductivity ◽  
Hole Concentration ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
Filling Fraction ◽  
Fe Content

Single-phase filled skutterudite compounds, CeyFexCo4−xSb12 (x = 0 to 3.0, y = 0 to 0.74), were synthesized by a melting method. The effects of Fe content and Ce filling fraction on the thermoelectric properties of CeyFexCo4−xSb12 were investigated. The lattice thermal conductivity of Ce-saturated CeyFexCo4−xSb12, y being at the maximum corresponding to x, decreased with increasing Fe content (x) and reached its minimum at about x = 1.5. When x was 1.5, lattice thermal conductivity decreased with increasing Ce filling fraction till y = 0.3 and then began to increase after reaching the minimum at y = 0.3. Hole concentration and electrical conductivity of Cey Fe1.5Co2.5Sb12 decreased with increasing Ce filling fraction. The Seebeck coefficient increased with increasing Ce filling fraction. The greatest dimensionless thermoelectric figure of merit T value of 1.1 was obtained at 750 K for the composition of Ce0.28Fe1.52Co2.48Sb12.

Effects of Nb doping on thermoelectric properties of Zn4Sb3 at high temperatures

2009 ◽  
Vol 24 (2) ◽  
pp. 430-435 ◽  
Author(s):  
D. Li ◽  
H.H. Hng ◽  
J. Ma ◽  
X.Y. Qin
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
High Temperatures ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Thermoelectric Performance ◽  
Temperature Range ◽  
A Value ◽  
Nb Doping ◽  
Thermal Conductivities

The thermoelectric properties of Nb-doped Zn4Sb3 compounds, (Zn1–xNbx)4Sb3 (x = 0, 0.005, and 0.01), were investigated at temperatures ranging from 300 to 685 K. The results showed that by substituting Zn with Nb, the thermal conductivities of all the Nb-doped compounds were lower than that of the pristine β-Zn4Sb3. Among the compounds studied, the lightly substituted (Zn0.995Nb0.005)4Sb3 compound exhibited the best thermoelectric performance due to the improvement in both its electrical resistivity and thermal conductivity. Its figure of merit, ZT, was greater than the undoped Zn4Sb3 compound for the temperature range investigated. In particular, the ZT of (Zn0.995Nb0.005)4Sb3 reached a value of 1.1 at 680 K, which was 69% greater than that of the undoped Zn4Sb3 obtained in this study.

Thermoelectric Properties of K2Bi8−xSbxSe13Solid Solutions and Se Doping

2001 ◽  
Vol 691 ◽  
Author(s):  
Theodora Kyratsi ◽  
Jeffrey S. Dyck ◽  
Wei Chen ◽  
Duck-Young Chung ◽  
Ctirad Uher ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Charge Transport ◽  
Transport Properties ◽  
Thermoelectric Properties ◽  
Solid Solutions ◽  
Figure Of Merit ◽  
Lattice Thermal Conductivity ◽  
Se Doping ◽  
Mass Fluctuation ◽  
Thermal Conductivities

ABSTRACTOur efforts to improve the thermoelectric properties of β-K2Bi8Se13, led to systematic studies of solid solutions of the type β-K2Bi8−xSbxSe13. The charge transport properties and thermal conductivities were studied for selected members of the series. Lattice thermal conductivity decreases due to the mass fluctuation generated in the lattice by the mixed occupation of Sb and Bi atoms. Se excess as a dopant was found to increase the figure-of merit of the solid solutions.

Thermoelectric Properties of n-type (Bi2Se3)x(Bi2Te3)1-x Crystals Prepared by Zone Melting

2008 ◽  
Vol 368-372 ◽  
pp. 547-549
Author(s):  
Jun Jiang ◽  
Ya Li Li ◽  
Gao Jie Xu ◽  
Ping Cui ◽  
Li Dong Chen
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Carrier Concentration ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Zone Melting ◽  
Chemical Compositions ◽  
Melting Method ◽  
Temperature Range

In the present study, n-type (Bi2Se3)x(Bi2Te3)1-x crystals with various chemical compositions were fabricated by the zone melting method. Thermoelectric properties, including Seebeck coefficient (α), electrical conductivity (σ) and thermal conductivity (κ), were measured in the temperature range of 300-500 K. The influence of the variations of Bi2Te3 and Bi2Se3 content on thermoelectric properties was studied. The increase of Bi2Se3 content (x) caused an increase in carrier concentration and thus an increase of σ and a decrease of α. The maximum figure of merit (ZT = α2σT/κ) of 0.87 was obtained at about 325 K for the composition of 93%Bi2Te3-7%Bi2Se3 with doping TeI4.

Influence of Encapsulation of Fullerenes on Optical and Thermoelectric Properties of Carbon Nanotubes

2021 ◽  
Vol 26 (2) ◽  
pp. 123-131
Author(s):  
E.V. Morozova ◽  
◽  
D.A. Timkaeva ◽  
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
C60 Fullerene ◽  
Zone Structure ◽  
Thermoelectric Figure ◽  
High Frequencies ◽  
The One ◽  
Coefficients Of Absorption

The hybrid systems based on the carbon nanotubes (CNT) and fullerenes (nanopipodes) are promising for applications in nanoelectronics. With insignificant variation of the CNT diameter the change of the fullerenes geometry takes place. The periodically located inside fullerenes represent a set of quantum points in the one-dimensional super-lattice. Using the variation of inside fullerenes it is possible to modulate the zone structure of the CNT – fullerene system and to control the electronic and phonon characteristics of nanopipodes. In the work the optical and thermoelectric properties of CNT with encapsulated molecules of C60 fullerene have been investigated. Using the first-principle methods the coefficients of absorption, optical conductivi-ty, thermal conductivity, thermoelectric figure of merit for CNT with fullerenes, periodically lo-cated inside the nanotubes at different distances from each other, have been calculated. It has been shown that with decreasing the distance between fullerenes the optical conductivity of CNT – C60 is suppressed at high frequencies. It has been determined that the conductance of the structures with fullerenes is less than the conductance of a clean tube, and approximately equal for considered distances (12.3 and 19.7 Å) between fullerenes. The CNT thermal conductivity due to the encapsulation of fullerenes considerably (3–4 times) decreases for the considered CNT (8.8) – C60 systems.

Thermoelectric Properties of CoSb3-based Skutterudite Compounds

2010 ◽  
Vol 1267 ◽  
Author(s):  
Adul Harnwunggmoung ◽  
Ken Kurosaki ◽  
Hiroaki Muta ◽  
Shinsuke Yamanaka
Keyword(s):  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Room Temperature ◽  
Lattice Thermal Conductivity ◽  
Filling Ratio ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
Alloy Scattering ◽  
Skutterudite Compound

AbstractCoSb3 is known as a skutterudite compound that could exhibit high thermoelectric figure of merit. However, the thermal conductivity of CoSb3 is relatively high. In order to enhance the thermoelectric performance of this compound, we tried to reduce the thermal conductivity of CoSb3 by substitution of Rh for Co and by Tl-filling into the voids. The polycrystalline samples of (Co,Rh)Sb3 and Tl-filled CoSb3 were prepared and the thermoelectric properties such as the Seebeck coefficient, electrical resistivity, and thermal conductivity were measured in the temperature range from room temperature to 750 K. The Rh substitution for Co reduced the lattice thermal conductivity, due to the alloy scattering effect. The minimum value of the lattice thermal conductivity was 4 Wm-1K-1 at 750 K obtained for (Co0.7Rh0.3)Sb3. Also the lattice thermal conductivity rapidly decreased with increasing the Tl-filling ratio. T10.25Co4Sb12 exhibited the best ZT values; the maximum ZT was 0.9 obtained at 600 K.

Thermoelectric Properties of Bi2Te3-ySey Bulk Materials Synthesized by Melting-Grinding Process

2018 ◽  
Vol 773 ◽  
pp. 145-151
Author(s):  
Min Soo Park ◽  
Gook Hyun Ha ◽  
Hye Young Koo ◽  
Yong Ho Park
Keyword(s):  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Room Temperature ◽  
Thermal Characteristics ◽  
Grinding Process ◽  
Alloy Scattering ◽  
Temperature Range ◽  
P Type ◽  
Optimal Effect

The Bi–Te thermoelectric system shows an excellent figure of merit (ZT) near room temperature. Research on increasing the ZT value for n‑type Bi–Te is imperative because the thermoelectric properties of this compound are inferior to those of the p-type material. For this purpose, n-type Bi2Te3-ySey powders with various amounts of Se dopant (0.3 ≤ y ≤ 0.6) were synthesized by a vacuum melting-grinding process to improve the physical properties. The ZT value of the sintered bodies was investigated in the temperature range of 298–423 K with regard to the electrical and thermal characteristics. As the Se content increased, the electrical conductivity decreased owing to a reduction in the carrier concentration, which improved the overall value of ZT. The thermal conductivity clearly decreased as the Se content increased in the temperature range of 298–373 K due to increased alloy scattering, as well as a reduction in the lattice thermal conductivity caused by crystal grain boundary scattering. At room temperature, Bi2Te2.7Se0.3 (y = 0.3) exhibited the highest ZT of 0.85. At increased temperatures, the ZT value was highest for Bi2Te2.55Se0.45 (y = 0.45), indicating that the optimal effect of the Se dopants varies depending on the temperature range.

scholarly journals Improvement of the thermoelectric properties of a MoO3 monolayer through oxygen vacancies

2019 ◽  
Vol 10 ◽  
pp. 2031-2038
Author(s):  
Wenwen Zheng ◽  
Wei Cao ◽  
Ziyu Wang ◽  
Huixiong Deng ◽  
Jing Shi ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Density Of States ◽  
First Principles ◽  
Figure Of Merit ◽  
Oxygen Vacancies ◽  
Transport Theory ◽  
Boltzmann Transport ◽  
Anisotropic Behavior ◽  
Boltzmann Transport Theory

We have investigated the thermoelectric properties of a pristine MoO3 monolayer and its defective structures with different oxygen vacancies using first-principles methods combined with Boltzmann transport theory. Our results show that the thermoelectric properties of the MoO3 monolayer exhibit an evident anisotropic behavior which is caused by the similar anisotropy of the electrical and thermal conductivity. The thermoelectric materials figure of merit (ZT) value along the x- and the y-axis is 0.72 and 0.08 at 300 K, respectively. Moreover, the creation of oxygen vacancies leads to a sharp peak near the Fermi level in the density of states. This proves to be an effective way to enhance the ZT values of the MoO3 monolayer. The increased ZT values can reach 0.84 (x-axis) and 0.12 (y-axis) at 300 K.

Synthesis and Thermoelectric Properties of Co4-XFeXSb12-YSnY Skutterudites

2011 ◽  
Vol 695 ◽  
pp. 65-68 ◽  
Author(s):  
Kwan Ho Park ◽  
Il Ho Kim
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Phonon Scattering ◽  
Charge Compensation ◽  
Fe Doping ◽  
Sn Doping ◽  
Double Doping

Co4-xFexSb12-ySny skutterudites were synthesized by mechanical alloying and hot pressing, and thermoelectric properties were examined. The carrier concentration increased by doping and thereby the electrical conductivity increased compared with intrinsic CoSb3. Every specimen had a positive Seebeck coefficient. Fe doping caused a decrease in the Seebeck coefficient but it could be enhanced by Fe/Sn double doping possibly due to charge compensation. The thermal conductivity was desirably very low and this originated from ionized impurity-phonon scattering. Thermoelectric properties were improved remarkably by Fe/Sn doping, and a maximum figure of merit, ZT = 0.5 was obtained at 723 K in the Co3FeSb11.2Sn0.8 specimen.

Sign in / Sign up

Export Citation Format

Share Document