scholarly journals Designing a species-selective lure based on microbial volatiles to target Lobesia botrana

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Sebastian Larsson Herrera ◽  
Péter Rikk ◽  
Gabriella Köblös ◽  
Magdolna Olívia Szelényi ◽  
Béla Péter Molnár ◽  
...  

AbstractSustainable, low impact control methods, including mating disruption and microbial insecticides against L. botrana have been available for decades. Yet, successful implementation has been restricted to only a few grapevine districts in the world. A limiting factor is the lack of a female attractant to either monitor or control the damaging sex. Volatile attractants for both female and male insects can be used to assess when L. botrana populations exceed economic thresholds, and to decrease the use of synthetic pesticides within both conventional and pheromone programs. Rather than using host-plant volatiles, which are readily masked by background volatiles released by the main crop, we tested the attractiveness of volatiles that signify microbial breakdown and more likely stand out against the background odour. A two-component blend of 2-phenylethanol (2-PET) and acetic acid (AA) caught significant numbers of both sexes. Catches increased with AA and, to a minimal extent, 2-PET loads. However, a higher load of 2-PET also increased bycatches, especially of Lepidoptera and Neuroptera. Major (ethanol, ethyl acetate, 3-methyl-1-butanol) or minor (esters, aldehydes, alcohols and a ketone) fermentation volatiles, did surprisingly not improve the attraction of L. botrana compared to the binary blend of 2-PET and AA alone, but strongly increased bycatches. The most attractive lure may thus not be the best choice in terms of specificity. We suggest that future research papers always disclose all bycatches to permit evaluation of lures in terms of sustainability.

2019 ◽  
Vol 4 (5) ◽  
pp. 971-976
Author(s):  
Imran Musaji ◽  
Trisha Self ◽  
Karissa Marble-Flint ◽  
Ashwini Kanade

Purpose The purpose of this article was to propose the use of a translational model as a tool for identifying limitations of current interprofessional education (IPE) research. Translational models allow researchers to clearly define next-step research needed to translate IPE to interprofessional practice (IPP). Method Key principles, goals, and limitations of current IPE research are reviewed. A popular IPE evaluation model is examined through the lens of implementation research. The authors propose a new translational model that more clearly illustrates translational gaps that can be used to direct future research. Next steps for translating IPE to IPP are discussed. Conclusion Comprehensive reviews of the literature show that the implementation strategies adopted to date have fostered improved buy-in from key stakeholders, as evidenced by improved attitudes and perceptions toward interprofessional collaboration/practice. However, there is little evidence regarding successful implementation outcomes, such as changed clinician behaviors, changed organizational practices, or improved patient outcomes. The authors propose the use of an IPE to IPP translational model to facilitate clear identification of research gaps and to better identify future research targets.


2020 ◽  
Author(s):  
Stig Magne Solstad ◽  
Gøril Kleiven Solberg ◽  
Louis George Castonguay ◽  
Christian Moltu

Purpose: Routine outcome monitoring (ROM) and clinical feedback systems (CFS) are becoming prevalent in mental health services. The field faces several challenges to successful implementation. The purpose of this study is to gain a better understanding of these challenges by exploring the patient perspective. Method: We report the findings from a qualitative, video assisted interview study of 12 patients from a Norwegian mental health outpatient clinic using ROM/CFS. Results: Our analysis resulted in three pairs of opposing experiences with using ROM/CFS: 1) Explicit vs. implicit use of CFS information, 2) CFS directing focus towards- vs. directing focus away from therapeutic topics and 3) Giving vs. receiving feedback. None of these were intrinsically helpful or hindering. Participants had vastly differing preferences for how to use ROM/CFS in clinical encounters, but all needed the information to be used in a meaningful way by their therapists. If not, ROM/CFS was at risk of becoming meaningless and hindering for therapy. Conclusion: These findings confirm and provide further nuance to previous research. We propose to consider ROM/CFS a clinical skill that should be a part of basic training for therapists. How to use and implement ROM/CFS skillfully should also be the focus of future research.


2019 ◽  
Vol 14 (2) ◽  
pp. 146-151 ◽  
Author(s):  
Junaid Khan ◽  
Amit Alexander ◽  
Mukta Agrawal ◽  
Ajazuddin ◽  
Sunil Kumar Dubey ◽  
...  

Diabetes and its complications are a significant health concern throughout the globe. There are physiological differences in the mechanism of type-I and type-II diabetes and the conventional drug therapy as well as insulin administration seem to be insufficient to address the problem at large successfully. Hypoglycemic swings, frequent dose adjustments and resistance to the drug are major problems associated with drug therapy. Cellular approaches through stem cell based therapeutic interventions offer a promising solution to the problem. The need for pancreatic transplants in case of Type- I diabetes can also be by-passed/reduced due to the formation of insulin producing β cells via stem cells. Embryonic Stem Cells (ESCs) and induced Pluripotent Stem Cells (iPSCs), successfully used for generating insulin producing β cells. Although many experiments have shown promising results with stem cells in vitro, their clinical testing still needs more exploration. The review attempts to bring into light the clinical studies favoring the transplantation of stem cells in diabetic patients with an objective of improving insulin secretion and improving degeneration of different tissues in response to diabetes. It also focuses on the problems associated with successful implementation of the technique and possible directions for future research.


2019 ◽  
Vol 47 (6) ◽  
pp. 618-630 ◽  
Author(s):  
Kjetil A. Van Der Wel ◽  
Olof Östergren ◽  
Olle Lundberg ◽  
Kaarina Korhonen ◽  
Pekka Martikainen ◽  
...  

Aims: Future research on health inequality relies on data that cover life-course exposure, different birth cohorts and variation in policy contexts. Nordic register data have long been celebrated as a ‘gold mine’ for research, and fulfil many of these criteria. However, access to and use of such data are hampered by a number of hurdles and bottlenecks. We present and discuss the experiences of an ongoing Nordic consortium from the process of acquiring register data on socio-economic conditions and health in Denmark, Finland, Norway and Sweden. Methods: We compare experiences of data-acquisition processes from a researcher’s perspective in the four countries and discuss the comparability of register data and the modes of collaboration available to researchers, given the prevailing ethical and legal restrictions. Results: The application processes we experienced were time-consuming, and decision structures were often fragmented. We found substantial variation between the countries in terms of processing times, costs and the administrative burden of the researcher. Concerned agencies differed in policy and practice which influenced both how and when data were delivered. These discrepancies present a challenge to comparative research. Conclusions: We conclude that there are few signs of harmonisation, as called for by previous policy documents and research papers. Ethical vetting needs to be centralised both within and between countries in order to improve data access. Institutional factors that seem to facilitate access to register data at the national level include single storage environments for health and social data, simplified ethical vetting and user guidance.


Author(s):  
Anuj Dixit ◽  
Srikanta Routroy ◽  
Sunil Kumar Dubey

Purpose This paper aims to review the healthcare supply chain (HSC) literature along various areas and to find out the gap in it. Design/methodology/approach In total, 143 research papers were reviewed during 1996-2017. A critical review was carried out in various dimensions such as research methodologies/data collection method (empirical, case study and literature review) and inquiry mode of research methodology (qualitative, quantitative and mixed), country-specific, targeted area, research aim and year of publication. Findings Supply chain (SC) operations, performance measurement, inventory management, lean and agile operation, and use of information technology were well studied and analyzed, however, employee and customer training, tracking and visibility of medicines, cold chain management, human resource practices, risk management and waste management are felt to be important areas but not much attention were made in this direction. Research limitations/implications Mainly drug and vaccine SC were considered in current study of HSC while SC along healthcare equipment and machine, hospitality and drug manufacturing related papers were excluded in this study. Practical implications This literature review has recognized and analyzed various issues relevant to HSC and shows the direction for future research to develop an efficient and effective HSC. Originality/value The insight of various aspects of HSC was explored in general for better and deeper understanding of it for designing of an efficient and competent HSC. The outcomes of the study may form a basis to decide direction of future research.


Author(s):  
Gert Kootstra ◽  
Xin Wang ◽  
Pieter M. Blok ◽  
Jochen Hemming ◽  
Eldert van Henten

Abstract Purpose of Review The world-wide demand for agricultural products is rapidly growing. However, despite the growing population, labor shortage becomes a limiting factor for agricultural production. Further automation of agriculture is an important solution to tackle these challenges. Recent Findings Selective harvesting of high-value crops, such as apples, tomatoes, and broccoli, is currently mainly performed by humans, rendering it one of the most labor-intensive and expensive agricultural tasks. This explains the large interest in the development of selective harvesting robots. Selective harvesting, however, is a challenging task for a robot, due to the high levels of variation and incomplete information, as well as safety. Summary This review paper provides an overview of the state of the art in selective harvesting robotics in three different production systems; greenhouse, orchard, and open field. The limitations of current systems are discussed, and future research directions are proposed.


Land ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 479
Author(s):  
Julian Laabs ◽  
Daniel Knitter

In this study, we present a transparent and reproducible approach to model agricultural production with respect to environmental characteristics and available labour. Our research focuses on the city of Pergamon and its surroundings, with an emphasis on the transition between the Hellenistic and Roman Imperial Period, where widespread demographic changes took place. We investigated the degree of local self-sufficiency using different concepts of a city’s complementary region. Using simple topographic derivatives, we derive a measure of environmental suitability that we translate into a carrying capacity index. Our results show that workforce was not a limiting factor for local self-sufficiency. However, environmental carrying capacity may have been limiting in a scenario with a large population. An active investment into the environment, e.g., by the construction of terraces, could have helped to increase the degree of self-sufficiency. Future research should investigate the level of resilience of such a coupled socio-ecological system in relation to environmental and socio-cultural dynamics.


BMJ Open ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. e042547
Author(s):  
Atif Riaz ◽  
Olga Cambaco ◽  
Laura Elizabeth Ellington ◽  
Jennifer L Lenahan ◽  
Khatia Munguambe ◽  
...  

ObjectivesPaediatric pneumonia burden and mortality are highest in low-income and middle-income countries (LMIC). Paediatric lung ultrasound (LUS) has emerged as a promising diagnostic tool for pneumonia in LMIC. Despite a growing evidence base for LUS use in paediatric pneumonia diagnosis, little is known about its potential for successful implementation in LMIC. Our objectives were to evaluate the feasibility, usability and acceptability of LUS in the diagnosis of paediatric pneumonia.DesignProspective qualitative study using semistructured interviewsSettingTwo referral hospitals in Mozambique and PakistanParticipantsA total of 21 healthcare providers (HCPs) and 20 caregivers were enrolled.ResultsHCPs highlighted themes of limited resource availability for the feasibility of LUS implementation, including perceived high cost of equipment, maintenance demands, time constraints and limited trained staff. HCPs emphasised the importance of policymaker support and caregiver acceptance for long-term success. HCP perspectives of usability highlighted ease of use and integration into existing workflow. HCPs and caregivers had positive attitudes towards LUS with few exceptions. Both HCPs and caregivers emphasised the potential for rapid, improved diagnosis of paediatric respiratory conditions using LUS.ConclusionsThis was the first study to evaluate HCP and caregiver perspectives of paediatric LUS through qualitative analysis. Critical components impacting feasibility, usability and acceptability of LUS for paediatric pneumonia diagnosis in LMIC were identified for initial deployment. Future research should explore LUS sustainability, with a particular focus on quality control, device maintenance and functionality and adoption of the new technology within the health system. This study highlights the need to engage both users and recipients of new technology early in order to adapt future interventions to the local context for successful implementation.Trial registration numberNCT03187067.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Rajesh Pansare ◽  
Gunjan Yadav ◽  
Madhukar R. Nagare

Purpose Uncertainties in manufacturing and changing customer demands force manufacturing industries to adopt new strategies, such as the reconfigurable manufacturing system (RMS). To improve the implementation and performance of RMS, it is necessary to review the available literature and identify future trends in this field. This paper aims to analyze existing literature and to see trends in RMS-related research. Design/methodology/approach The systematic literature review and analysis of RMS-related research papers from 1999 to 2020 is carried out in this literature. The selected studies are analyzed based on the year of publication, journals, publishers, active authors, research design, countries, enablers, barriers, performance evaluation parameters and universities. Findings After the analysis of selected RMS-related research papers, the top countries, universities, journals, publishers and authors are identified in this domain. Research themes and trends in research are identified in this study. Besides, it has been noted that there is a need for further research in this domain and for the creation of a generalized framework that can guide researchers and practitioners to increase RMS adoption. Practical implications Research insights, guidance and observations from this paper are provided to RMS-related researchers and practitioners. Important research gaps are identified in this study, which can provide direction for future research and trends in RMS research. Originality/value The study presented focuses mainly on the method of collecting, organizing, capturing, interpreting and analyzing data to provide more insight into RMS to identify future trends in research.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Victor Saha ◽  
Praveen Goyal ◽  
Charles Jebarajakirthy

Purpose The purpose of this paper is to present a systematic review of the available literature on value co-creation (VCC) and provide insightful future directions for research in this domain. Design/methodology/approach The extant literature on VCC has been reviewed by collecting relevant research papers based on certain specified delimiting criteria. A total of 110 research papers have been analysed to gain useful insights into VCC literature. Findings The study analyses the literature on VCC and provides a clear distinction between VCC and its closely related constructs in the literature. The study also draws significant insights from the VCC literature based on some specific parameters. Some frequently used theoretical perspectives have been discussed in the study, thus pointing towards a few alternative theories that can be used for future research. Finally, specific trends emerging from the literature have been discussed that provide a comprehensive understanding of the research inclinations of this concept, along with future scopes of research in the VCC domain. Research limitations/implications The papers were selected for this study based on some delimiting criteria. Thus, the findings cannot be generalised for the entire research on VCC. Originality/value This paper fulfils the need for a systematic review of the extant literature on VCC. The study synthesises literature and bibliography on VCC from 2004 to 2019 to benefit both academics and practitioners and gives some directions to advance this domain of literature.


Sign in / Sign up

Export Citation Format

Share Document