scholarly journals Design and experimental analysis of dual-band polarization converting metasurface for microwave applications

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Bilawal Khan ◽  
Babar Kamal ◽  
Sadiq Ullah ◽  
Imran Khan ◽  
Jawad Ali Shah ◽  
...  
Keyword(s):  
Electromagnetic Waves ◽  
Polarization State ◽  
Plane Waves ◽  
Microwave Frequency ◽  
Dual Band ◽  
Orthogonal Polarization ◽  
Frequency Bands ◽  
Practical Applications ◽  
Sensor Applications ◽  
Polarized Waves

Abstract The manipulation of polarization state of electromagnetic waves is of great importance in many practical applications. In this paper, the reflection characteristics of a thin and dual-band metasurface are examined in the microwave frequency regime. The metasurface consists of a 22 × 22 element array of periodic unit cells. The geometry of the unit cell consists of three layers, including a 45° inclined dipole shape metal patch on top, which is backed by a 1.6 mm thick FR-4 substrate in the middle, and a fully reflective metallic mirror at the bottom. The proposed surface is exposed to horizontally (x) or vertically (y) polarized plane waves and the co and cross polarization reflection coefficients of the reflected waves are investigated experimentally in the 6–26 GHz frequency range. The metasurface is designed to convert incident waves of known polarization state (horizontal or vertical) to orthogonal polarization state (vertical and horizontal) in two distinct frequency bands, i.e. 7.1–8 GHz and 13.3–25.8 GHz. In these two frequency bands the simulated and experimental results are in good agreement. The polarization conversion ratio (PCR) of the surface is greater than 95% in the targeted frequency bands. A detailed parametric analysis of the metasurface is also discussed in this work and it has been estimated that the surface has the additional ability to convert linearly polarized waves to circularly polarized waves at several distinct frequencies. The proposed metasurface can be utilized in sensor applications, stealth technology, electromagnetic measurements, and antennas design.

scholarly journals Dual-band dichroic asymmetric transmission of linearly polarized waves in terahertz chiral metamaterial

Nanophotonics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 3235-3242 ◽  
Author(s):  
Tingting Lv ◽  
Xieyu Chen ◽  
Guohua Dong ◽  
Meng Liu ◽  
Dongming Liu ◽  
...  
Keyword(s):  
High Performance ◽  
Light Propagation ◽  
Polarization State ◽  
Dual Band ◽  
Terahertz Waves ◽  
Asymmetric Transmission ◽  
Polarized Waves ◽  
Wide Range ◽  
Linearly Polarized ◽  
Chiral Metamaterial

AbstractPolarization conversion dichroism is of particular interest in manipulating the polarization state of light, whereas high-performance asymmetric transmission (AT) of linearly polarized waves is still inaccessible in the terahertz range. Here, a bilayer chiral metamaterial consisting of orthogonally chained S-shaped patterns with broken symmetry along the light propagation direction is proposed and demonstrated experimentally to realize a dual-band dichroic AT effect for linearly polarized terahertz waves. The AT effects are robust across a wide range of incident angles. The observed strong AT can be theoretically explained by a multiple reflection and transmission interference model and the transfer matrix method. The proposed bilayer chiral metamaterial may have broad applications in polarization manipulation, chiral biosensing and direction-dependent information processing.

Eight-shaped polarization-dependent electromagnetic bandgap structure and its application as polarization reflector

2021 ◽  
pp. 1-9
Author(s):  
Priyanka Dalal ◽  
Sanjeev Kumar Dhull
Keyword(s):  
Surface Wave ◽  
Plane Waves ◽  
Dual Band ◽  
Center Frequency ◽  
Electromagnetic Bandgap ◽  
Circularly Polarized ◽  
Polarized Waves ◽  
Incident Plane ◽  
Measurement Results ◽  
Linearly Polarized

Abstract In this paper, an eight-shaped polarization-dependent electromagnetic bandgap (ES-PDEBG) structure is proposed. The unit cell of ES-PDEBG structure consists of an outer eight-shaped EBG patch with two inner square patches and three vias. Surface wave bandgap and reflection phase characteristics have been studied for the proposed structure. From the measurement results, two surface wave bandgaps with center frequencies 3.42 and 5.88 GHz are observed along the X-direction, and one surface wave bandgap with center frequency 3.69 GHz is observed along the Y-direction. The refection phase bandgap of the proposed structure is centered at 5.61 and 3.31 GHz for x- and y-polarized incident plane waves, respectively. Furthermore, the application of the proposed structure as polarization reflector is presented. The study demonstrates that the structure can act as dual-band in-polarization reflector for circularly polarized waves. In addition, incident linearly polarized waves are reflected as circularly polarized waves in four operating bands.

scholarly journals Electromagnetic Metasurfaces and Reconfigurable Metasurfaces: A Review

2021 ◽  
Vol 8 ◽  
Author(s):  
Sidrish Zahra ◽  
Liang Ma ◽  
Wenjiao Wang ◽  
Jian Li ◽  
Dexu Chen ◽  
...  
Keyword(s):  
Electromagnetic Waves ◽  
Polarization State ◽  
Development Trend ◽  
Electromagnetic Properties ◽  
Material Structure ◽  
The Novel ◽  
Practical Applications ◽  
Main Research ◽  
Cell Structures ◽  
Electromagnetic Characteristics

Metamaterial is a kind of material/structure that is artificially designed and has exceptional electromagnetic properties and/or other physical properties, not found in nature. A class of electromagnetic metamaterial with only one or a few layers of periodic or aperiodic arranged cell structures in the direction of electromagnetic waves propagation can be referred to as a metasurface. Metasurface can be considered as a two-dimensional representation of metamaterial and can realize the controlling of the amplitude, phase, and polarization state/direction of the incident electromagnetic wave. According to the novel electromagnetic characteristics of metasurface and its big advantages, a series of new planar devices and systems based on metasurface can be developed. The goal of this review article is firstly to provide introductions for basic metasurface, its significance properties, and application principles. Meanwhile, the main research progresses of regular metasurfaces and the newly developed reconfigurable metasurfaces are analyzed, focusing on the types of amplitude modulation, phase modulation, polarization modulation, and multidimensional modulation. Finally, the research significances of metasurface development trend and important engineering practical applications are analyzed in the end.

Propagation of high-frequency electromagnetic waves through a magnetized plasma in curved space-time. II. Application of the asymptotic approximation

1981 ◽  
Vol 374 (1756) ◽  
pp. 65-86 ◽  
Keyword(s):  
High Frequency ◽  
Electromagnetic Waves ◽  
Polarization State ◽  
Space Time ◽  
Magnetized Plasma ◽  
Curved Space ◽  
Polarized Waves ◽  
Background Magnetic Field ◽  
Linearly Polarized ◽  
Unmagnetized Plasma

This is the second of two papers on the propagation of high-frequency electromagnetic waves through an inhomogeneous, non-stationary plasma in curved space-time. By applying the general two-scale W.K.B. method developed in part I to the basic wave equation, derived also in that paper, we here obtain the dispersion relation, the rays, the polarization states and the transport laws for the amplitudes of these waves. In an unmagnetized plasma the transport preserves the helicity and the eccentricity of the polarization state along each ray; the axes of the polarization ellipse rotate along a ray, relative to quasiparallely displaced directions, at a rate determined by the vorticity of the electron fluid; and the norm of the amplitude changes according to a conservation law which can be interpreted as the constancy of the number of quasiphotons. In a magnetized plasma the polarization state changes differently for ordinary and extraordinary waves, according to the angle between the wavenormal and the background magnetic field, and under specified approximation conditions the direction of polarization of linearly polarized waves undergoes a generalized Faraday rotation.

scholarly journals A Mechanically Reprogrammable Pancharatnam-Berry Metasurface

2021 ◽  
Author(s):  
Quan Xu ◽  
Xiaoqiang Su ◽  
Xueqian Zhang ◽  
Lijuan Dong ◽  
Lifeng Liu ◽  
...  
Keyword(s):  
Electromagnetic Waves ◽  
Berry Phase ◽  
Low Cost ◽  
Dynamic Control ◽  
Superior Performance ◽  
Exciting Field ◽  
Practical Applications ◽  
Polarized Waves ◽  
Atom Level ◽  
Meta Atom

Abstract Metasurfaces have enabled the realization of several optical functionalities over an ultrathin platform, fostering the exciting field of flat optics. Traditional metasurfaces are achieved by arranging a layout of static meta-atoms to imprint a desired operation to the impinging wavefront, but their functionality cannot be altered. Reconfigurability and programmability of metasurfaces are the next important step to broaden their impact, adding customized on-demand functionality in which each meta-atom can be individually reprogrammed. However, programmable metasurfaces to date can only reconfigure 2 or 4 phase levels per meta-atom at best, hindering the overall functionality performance. Here, we demonstrate a mechanical metasurface platform with controllable rotation at the meta-atom level, which can implement continuous Pancharatnam-Berry phase control of circularly polarized waves. As the proof-of-concept experiments, we demonstrate metalensing, focused vortex beam generation, and holographic imaging in the same metasurface template, exhibiting versatility and superior performance. Such dynamic control of electromagnetic waves using a single, low-cost metasurface paves an avenue towards practical applications, driving the field of reprogrammable intelligent metasurfaces for a variety of applications.

Dual Band Paper Substrate CPW Antenna for Wireless Applications

2019 ◽  
Vol 8 (9S3) ◽  
pp. 605-608
Keyword(s):  
Reflection Coefficient ◽  
Mobile Communication ◽  
Coplanar Waveguide ◽  
Dual Band ◽  
Antenna Feed ◽  
Paper Substrate ◽  
Frequency Bands ◽  
Wireless Applications

In this paper, a 15* 80 sized antenna is designed over a paper substrate to test its flexible properties. The proposed antenna feed by a grounded coplanar waveguide(GCPW) is stimulated and the measured results show the operating Dual Band of the antenna cover(3.34-3.62 GHz) and (5.92-6.24 GHz) with the reflection coefficient |S11|< -15dB.These frequency bands operate over SHF bands and hence supports Fixed Mobile Communication and WLAN applications.

Electromagnetic waves

2018 ◽  
Author(s):  
Nathalie Deruelle ◽  
Jean-Philippe Uzan
Keyword(s):  
Plane Wave ◽  
Electromagnetic Waves ◽  
Maxwell Equations ◽  
Plane Waves ◽  
Geometrical Optics ◽  
Particle Detection ◽  
Spatial Coordinates ◽  
A Charge

This chapter examines solutions to the Maxwell equations in a vacuum: monochromatic plane waves and their polarizations, plane waves, and the motion of a charge in the field of a wave (which is the principle upon which particle detection is based). A plane wave is a solution of the vacuum Maxwell equations which depends on only one of the Cartesian spatial coordinates. The monochromatic plane waves form a basis (in the sense of distributions, because they are not square-integrable) in which any solution of the vacuum Maxwell equations can be expanded. The chapter concludes by giving the conditions for the geometrical optics limit. It also establishes the connection between electromagnetic waves and the kinematic description of light discussed in Book 1.

Compact dual and triple band antennas for 5G-IOT applications

2021 ◽  
pp. 1-8
Author(s):  
Ruchi ◽  
Amalendu Patnaik ◽  
M. V. Kartikeyan
Keyword(s):  
Microwave Frequency ◽  
Mobile Internet ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Printed Antenna ◽  
Iot Applications ◽  
Multiband Antennas ◽  
New Radio ◽  
Compact Size ◽  
Triple Band

Abstract Designing miniaturized multiband antennas to cover both the 5G new radio frequencies (FR1 and FR2) simultaneously is a challenge for wireless communication researchers. This paper presents two antenna designs : a dual-band printed antenna of size 18 × 16 × 0.285 mm3 operating at FR1–5.8 GHz and FR2–28 GHz and a triple-band printed antenna with dimensions 30 × 25 × 0.543 mm3 operating at FR1–3.5 GHz and 5.8 GHz (sub-6 GHz microwave frequency bands) and FR2–28 GHz (mm-wave frequency band). The final projected triple-band antenna has a compact size with an impedance bandwidth of 12.71%, 11.32%, and 18.3% at 3.5 GHz, 5.8 GHz, and 28 GHz, respectively with the corresponding gain of 1.86 dB, 2.55 dB, and 4.41 dB. The measured radiation characteristics of the fabricated prototypes show that the proposed designs are suitable for trendy 5G-RFID and mobile Internet of things (IoT) applications.

scholarly journals Alcohol-based highly conductive polymer for conformal nanocoatings on hydrophobic surfaces toward a highly sensitive and stable pressure sensor

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Jung Joon Lee ◽  
Srinivas Gandla ◽  
Byeongjae Lim ◽  
Sunju Kang ◽  
Sunyoung Kim ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Mechanical Stability ◽  
Exchange Process ◽  
Conductive Polymer ◽  
High Sensitivity ◽  
Fast Response ◽  
Pdms Surface ◽  
Practical Applications ◽  
Sensor Applications ◽  
Water Based

Abstract Conformal and ultrathin coating of highly conductive PEDOT:PSS on hydrophobic uneven surfaces is essential for resistive-based pressure sensor applications. For this purpose, a water-based poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) solution was successfully exchanged to an organic solvent-based PEDOT:PSS solution without any aggregation or reduction in conductivity using the ultrafiltration method. Among various solvents, the ethanol (EtOH) solvent-exchanged PEDOT:PSS solution exhibited a contact angle of 34.67°, which is much lower than the value of 96.94° for the water-based PEDOT:PSS solution. The optimized EtOH-based PEDOT:PSS solution exhibited conformal and uniform coating, with ultrathin nanocoated films obtained on a hydrophobic pyramid polydimethylsiloxane (PDMS) surface. The fabricated pressure sensor showed high performances, such as high sensitivity (−21 kPa−1 in the low pressure regime up to 100 Pa), mechanical stability (over 10,000 cycles without any failure or cracks) and a fast response time (90 ms). Finally, the proposed pressure sensor was successfully demonstrated as a human blood pulse rate sensor and a spatial pressure sensor array for practical applications. The solvent exchange process using ultrafiltration for these applications can be utilized as a universal technique for improving the coating property (wettability) of conducting polymers as well as various other materials.

Sign in / Sign up

Export Citation Format

Share Document