Dual Band Paper Substrate CPW Antenna for Wireless Applications

2019 ◽  
Vol 8 (9S3) ◽  
pp. 605-608
Keyword(s):  
Reflection Coefficient ◽  
Mobile Communication ◽  
Coplanar Waveguide ◽  
Dual Band ◽  
Antenna Feed ◽  
Paper Substrate ◽  
Frequency Bands ◽  
Wireless Applications

In this paper, a 15* 80 sized antenna is designed over a paper substrate to test its flexible properties. The proposed antenna feed by a grounded coplanar waveguide(GCPW) is stimulated and the measured results show the operating Dual Band of the antenna cover(3.34-3.62 GHz) and (5.92-6.24 GHz) with the reflection coefficient |S11|< -15dB.These frequency bands operate over SHF bands and hence supports Fixed Mobile Communication and WLAN applications.

A Novel Pentagonal Shaped Planar Inverted-F Antenna for Defense Applications

2019 ◽  
Vol 12 (2) ◽  
pp. 95-100
Author(s):  
Purnima Sharma ◽  
Akshi Kotecha ◽  
Rama Choudhary ◽  
Partha Pratim Bhattacharya
Keyword(s):  
Mobile Communication ◽  
Satellite Communication ◽  
Dual Band ◽  
Vehicular Communication ◽  
Radio Frequency Field ◽  
Wireless Applications ◽  
High Frequency Structure Simulator ◽  
Low Profile ◽  
Radar Satellite ◽  
5 Ghz

Background: The Planar Inverted-F Antenna (PIFA) is most widely used for wireless communication applications due to its unique properties as low Specific Absorption Rate, low profile geometry and easy fabrication. In literature a number of multiband PIFA designs are available that support various wireless applications in mobile communication, satellite communication and radio frequency field. Methods: In this paper, a miniature sized planar inverted-F antenna has been proposed for dual-band operation. The antenna consists of an asymmetrical pentagonal shaped patch over an FR4 substrate. The overall antenna dimension is 10 × 10 × 3 mm3 and resonates at 5.7 GHz frequency. A modification is done in the patch structure by introducing an asymmetrical pentagon slot. Results: The proposed pentagonal antenna resonates at 5.7 GHz frequency. Further, modified antenna resonates at two bands. The lower band resonates at 5 GHz and having a bandwidth of 1.5 GHz. This band corresponds to C-band, which is suitable for satellite communication. The upper band is at 7.9 GHz with a bandwidth of 500 MHz. Performance parameters such as return loss, VSWR, input impedance and radiation pattern are obtained and analysed using ANSYS High- Frequency Structure Simulator. The radiation patterns obtained are directional, which are suitable for mobile communication. Conclusion: The antenna is compact in size and suitable for radar, satellite and vehicular communication.

Design and analysis of a metamaterial inspired dual band antenna for WLAN application

2019 ◽  
Vol 11 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Priyanka Garg ◽  
Priyanka Jain
Keyword(s):  
Reflection Coefficient ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Dual Band ◽  
Band Spectrum ◽  
Area Network ◽  
Dual Band Antenna ◽  
Compact Size

AbstractIn this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

scholarly journals A Novel Dual-Band Binary Branch Fractal Bionic Antenna for Mobile Terminals

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Xiaoying Ran ◽  
Zhen Yu ◽  
Tangyao Xie ◽  
Yao Li ◽  
Xiuxia Wang ◽  
...  
Keyword(s):  
Mobile Applications ◽  
Fractal Structure ◽  
Dual Band ◽  
Fourth Generation ◽  
Resonant Coupling ◽  
Frequency Bands ◽  
Wireless Applications ◽  
Measurement Results ◽  
Bionic Structure ◽  
Good Agreement

A novel two-iteration binary tree fractal bionic structure antenna is proposed for the third generation (3G), fourth generation (4G), WLAN, and Bluetooth wireless applications in the paper, which is based on the principles of conventional microstrip monopole antenna and resonant coupling technique, combined with the advantages of fractal geometry. A new fractal structure was presented for antenna radiator, similar to the tree in nature. The proposed antenna adapted two iterations on a fractal structure radiator, which covers mobile applications in two broad frequency bands with a bandwidth of 44.2% (1.85–2.9 GHz) for TD-SCDMA, WCDMA, CDMA2000, LTE33-41, and Bluetooth frequency bands, and 11.5% (4.9–5.5 GHz) for WLAN frequency band. The proposed antenna was fabricated on a G10/FR4 substrate with a dielectric constant of 4.4 and a size of 50 × 40 mm2. The good agreement between the measurement results and the simulation results validate that the proposed design approach meet the requirements for various wireless applications.

scholarly journals Compact MIMO antenna using dual-band for fifth-generation mobile communication system

2021 ◽  
Vol 24 (2) ◽  
pp. 921
Author(s):  
Debani Prasad Mishra ◽  
Kshirod Kumar Rout ◽  
Surender Reddy Salkuti
Keyword(s):  
Reflection Coefficient ◽  
Mobile Communication ◽  
Communication System ◽  
Impedance Matching ◽  
Antenna Design ◽  
Dual Band ◽  
Time Zone ◽  
Mimo Antenna ◽  
Fifth Generation ◽  
Multiple Input

This paper presents the design of a multiple-input and multiple-output (MIMO) antenna for a fifth-generation (5G) smartphone that will work in dual-band. The antenna proposed in this work operates at 2 frequency ranges, i.e., (3300-3600) MHz and (4800-5000) MHz. The antenna design consists of four antennas that are placed perpendicular to the edge of the system and this makes it different from the traditional 5G antennas. The area of each antenna on the side frames is (3.9×17 mm), and hence can be used in ultra-thin smartphones for 5G applications. The reflection coefficient obtained in the simulations is less than -6 dB for the required band, which suggests that the required impedance matching is obtained. The antenna proposed is designed by using central time zone (CST) microwave studio.

scholarly journals Design of Dual Band Antenna with Defects on Patch and Ground for Wireless Applications

2019 ◽  
Vol 8 (2) ◽  
pp. 261-264
Keyword(s):  
Reflection Coefficient ◽  
Frequency Band ◽  
Patch Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Band Frequency ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Dual Band Antenna ◽  
Simulation Results

In this paper, a rectangular patch antenna with slits for dual band capabilities is presented. The suggested antenna works for two frequencies which are at 2.5 GHz and 5.1 GHz. The first operating frequency is in the band of 2.3 to 2.7GHz with -16.8dB reflection coefficient at 2.5GHz resonating frequency, whereas the second band is 4.6 to 5.5GHz with -29.2dB reflection coefficient at 5.1GHz resonating frequency. The simulation results exhibit that, the suggested antenna works for dual band frequency having impedance bandwidth of 482 and 844 MHz respectively. The gain is observed as 2.9 dBi and 4.2 dBi of respective bands. The first frequency band can be used for Industrial, Scientific and Medical(ISM) applications and second frequency band can be used for C-band applications.

scholarly journals Inset fed Triple Band U-Slot Antenna for GSM900/GSM1900/WLAN Applications

2019 ◽  
Vol 8 (6S3) ◽  
pp. 1513-1517
Keyword(s):  
Mobile Communication ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Global System ◽  
Frequency Bands ◽  
Triple Band

To cover Global System for Mobile Communication(GSM) and WLAN frequency bands, three distinctive Inset fed antennas like rectangular microstrip, dualband dual slot and antennas are designed. Inset fed micostrip antenna is used for GSM1900 with an impedance bandwidth from 1.90GHz to 1.96GHz. Inset fed dual band dual slot antenna is used for GSM1900 and WLAN with impedance bandwidth is considered first band from 1.90GHz to 1.95GHz and second band from 2.38GHz to 2.42GHz. The proposed Inset fed triple band antenna is used for GSM900, GSM1900 and WLAN with appropriate position of slot, is to operate in frequency ranges of first band is from 920MHz to 940MHz, second band is from 1.91GHz to 1.94GHz and third band is from 2.39GHz to 2.43GHz. A correlation among various feed widths, feed lengths and slot widths are exhibited in this paper.

Design of Dual Band Antenna for WLAN Application

2014 ◽  
Vol 67 (3) ◽  
Author(s):  
M. Md. Shukor ◽  
M. Z. A. Abd. Aziz ◽  
B. H. Ahmad ◽  
M. K. Suaidi ◽  
M. A. Othman
Keyword(s):  
Frequency Response ◽  
Return Loss ◽  
Coplanar Waveguide ◽  
Dual Band ◽  
Ieee 802.11B ◽  
Resonant Frequencies ◽  
Ieee 802.11A ◽  
Frequency Bands ◽  
Dual Band Antenna

This paper presents the antenna designed with radiating structure of 3.5 for dual band applications. This antenna is designed and simulated by using CST Studio Suite software at 2.4 GHz and 5.2 GHz based on standard IEEE 802.11a (5.15 GHz-5.35 GHz) and IEEE 802.11b (2.4 GHz-2.48 GHz) frequency bands. The radiating structure 5 and 3 are designed to radiated at frequency 2.4 GHz and 5.2 GHz respectively. Then, both structures are combined to achieve dual band resonant frequencies. The techniques that have been used to achieve dual band resonant are by designing the 3.5 shaped by using planar and coplanar waveguide (CPW) structures. There are three designs of dual band antenna which are Design A, Design B and Design C. The optimum return loss for 2.4 GHz and 5.2 GHz frequency response are -16.44 dB and -18.78 dB respectively achieved by Design C. The changes on the position of radiating structure 3 will effects the frequency response, return loss and gain of the antenna.

scholarly journals Two-Port CPW-Fed Dual-Band MIMO Antenna for IEEE 802.11 a/b/g Applications

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Yuqing Dou ◽  
Zhuoni Chen ◽  
Jing Bai ◽  
Qibo Cai ◽  
Gui Liu
Keyword(s):  
Ieee 802.11 ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Frequency Bands ◽  
Mimo Antenna

A coplanar waveguide- (CPW-) fed dual-band multiple-input multiple-output (MIMO) antenna for 2.45/5.5 GHz wireless local area network (WLAN) applications is presented in this paper. The presented MIMO antenna consists of two identical trapezoidal radiating elements which are perpendicular to each other. The size of the entire MIMO antenna is 50 × 50 × 1.59 mm3, which is printed on a FR4 substrate. The measured impedance bandwidth of the proposed antenna is 2.25–3.15 GHz and 4.89–5.95 GHz, which can cover IEEE 802.11 a/b/g frequency bands. A rectangular microstrip stub is introduced to achieve a good isolation which is less than −15 dB in both operation frequency bands. The measured peak gain is 5.59 dBi at 2.45 GHz and 5.63 dBi at 5.5 GHz. The measured antenna efficiency is 77.8% and 80.4% in the lower and higher frequency bands, respectively. The ECC values at the lower and higher frequencies are lower than 0.003 and 0.01, respectively.

Expanded graphite monopole antenna printed on flexible paper substrate for 2.4 GHz wireless systems

2021 ◽  
pp. 1-8
Author(s):  
Ahmed A. Abdel Aziz ◽  
Ali T. Abdel-Motagaly ◽  
Ahmed A. Ibrahim ◽  
Waleed M. A. El Rouby ◽  
Mahmoud A. Abdalla
Keyword(s):  
Reflection Coefficient ◽  
Coplanar Waveguide ◽  
Wireless Systems ◽  
Expanded Graphite ◽  
Simulation Software ◽  
Monopole Antenna ◽  
Paper Substrate ◽  
Design Procedures ◽  
Conductor Strip ◽  
Material Preparation

Abstract In this work, a printed coplanar waveguide (CPW) fed single band antenna based on expanded graphite material is introduced. The proposed antenna is based on a CPW-monopole antenna with a U-shape conductor strip connected with the ground. Expanded graphite, a grade of graphene, is used as a conductor to design the uniplanar antenna over a flexible paper substrate. The antenna is designed for 2.4 GHz applications. The antenna design procedures are discussed. The material preparation and analysis are illustrated. Finally, the antenna fabrication and measurements of the reflection coefficient are discussed. The measured antenna reflection coefficient agrees with the simulated one, ensuring the antenna validity for serving the required applications. The radiation antenna parameters are discussed and simulated results from two-simulation software are included for comparison. The antenna has a simulated gain of 4 dBi and simulated efficiency of around 90% at 2.4 GHz.

Sign in / Sign up

Export Citation Format

Share Document