scholarly journals Optimization of entrapment efficiency and release of clindamycin in microsponge based gel

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
ALAA KHATTAB ◽  
Abdulhakim Nattouf
Keyword(s):  
Water Solubility ◽  
Entrapment Efficiency ◽  
Physical Characterization ◽  
Diffusion Method ◽  
Free Base ◽  
Scanning Calorimetry ◽  
External Phase ◽  
Microscopy Images ◽  
Emulsion Solvent Diffusion Method

AbstractThe aim of the present study was to formulate clindamycin (CLN) as a microsponge based gel to release the drug in a controlled manner and reduce the side effects in the treatment of acne. Since this method requires poor water solubility of the drug to be loaded in particles, therefore, conversion of the hydrochloride salt to free base was done. By using an emulsion solvent diffusion method, we made six different formulations of microsponges containing CLN-free base by changing the proportions of polymer, emulsifier and the pH of the external phase. These formulations were studied for physical characterization and for drug- polymer interactions. The physical characterization showed that microsponge formulations coded by C5, C6 resulted in a better loading efficiency and production yield and their particle size was less than 30 µm. Scanning electron microscopy images showed the microsponges porous and spherical. C5, C6 microsponge formulation was prepared as gel in Carbopol and in vitro evaluated. The microsponge formulation gel C8 was found to be optimized. C8 released 90.38% of drug over 12 h and showed viscosity 20,157 ± 38 cp, pH of 6.3 ± 0.09 and drug content of 99.64 ± 0.04%. Fourier transform infrared spectroscopy and differential scanning calorimetry confirmed no significant interactions between excipients and drug.

Optimized Formulation of Colon Targeted Microsheres for Prednisolone Sodium Phosphate: Application of Taguchi Experimental Design

2016 ◽  
Vol 1 (2) ◽  
Author(s):  
Kanchan Sonker ◽  
Randhir Gupta ◽  
Jovita Kanoujia ◽  
Viney Chawla ◽  
Manisha Pandey ◽  
...  
Keyword(s):  
Experimental Design ◽  
Sodium Phosphate ◽  
Double Emulsion ◽  
Statistical Design ◽  
Entrapment Efficiency ◽  
Diffusion Method ◽  
Taguchi Experimental Design ◽  
Emulsion Solvent Diffusion Method ◽  
Polymer Ratio

Microspheres of ethyl cellulose containing prednisolone sodium phosphate were prepared by double emulsion solvent diffusion method. A statistical design was used to study and optimize the variables that affect the preparation of microspheres. The experimental results showed that the drug: polymer ratio, stirring speed, concentration of surfactant, and volume of processing media played an important role in the formulation of microspheres. The prepared microspheres were characterized on the basis of particle size, scanning electron microscopy, entrapment efficiency and <italic>in vitro</italic> release. Taguchi experimental design helped to reduce the number of experiments. Optimized formulation exhibited Higuchi square root kinetics displaying diffusion from the microspheres as the main mechanism for drug release.

scholarly journals FORMULATION AND EVALUATION OF GLICLAZIDE NANOSPONGES

2019 ◽  
pp. 181-189
Author(s):  
RAHUL S. SOLUNKE ◽  
UDAY R. BORGE ◽  
KRISHNA MURTHY ◽  
MADHURI T. DESHMUKH ◽  
RAJKUMAR V. SHETE
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
Production Yield ◽  
In Vitro Dissolution ◽  
Diffusion Method ◽  
Average Particle ◽  
Dissolution Profile ◽  
Solvent Diffusion ◽  
Emulsion Solvent Diffusion Method

Objective: The objective of the present study was to develop and characterize an optimal stable nanosponges of Gliclazide (GLZ) by using the emulsion solvent diffusion method and aimed to increase its bioavailability and release the drug in sustained and controlled manner. Methods: The GLZ nanosponge was prepared by emulsion solvent diffusion method using different drug-polymer ratios (1:1 to 1:5) Eudragit S100 is used as a polymer. Differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) estimated the compatibility of GLZ with polymer. All formulations evaluated for production yield, entrapment efficiency, in vitro drug release, scanning electron microscopy (SEM) and stability studies. Results: The DSC and FTIR Studies revealed that no interaction between drug and polymer. The Production yield of all batches in the range of 73.8±0.30 to 85.6±0.32. Batch F3 showed the highest production yield, the entrapment efficiency of batch F3 70.6±0.77. The average particle size ranges from 303±2.36 to 680±2.50 nm. By the end of 10th hour F3 formulation shown highest drug release was found to be 94.40±1.12%. The release kinetics of the optimized formulation shows zero-order drug release. The stability study indicates no significant change in the in vitro dissolution profile of optimized formulation. Conclusion: The results of various evaluation parameters, revealed that GLZ nanosponges would be possible alternative delivery systems to conventional formulation to improve its bioavailability, the emulsion solvent diffusion method is best method for preparation of nanosponges and release the drug in sustained and controlled manner.

Optimized Formulation of Colon Targeted Microsheres for Prednisolone Sodium Phosphate: Application of Taguchi Experimental Design

2016 ◽  
Vol 1 (2) ◽  
Author(s):  
Kanchan Sonker ◽  
Randhir Gupta ◽  
Jovita Kanoujia ◽  
Viney Chawla ◽  
Manisha Pandey ◽  
...  
Keyword(s):  
Experimental Design ◽  
Sodium Phosphate ◽  
Double Emulsion ◽  
Statistical Design ◽  
Entrapment Efficiency ◽  
Diffusion Method ◽  
Taguchi Experimental Design ◽  
Emulsion Solvent Diffusion Method ◽  
Polymer Ratio

Microspheres of ethyl cellulose containing prednisolone sodium phosphate were prepared by double emulsion solvent diffusion method. A statistical design was used to study and optimize the variables that affect the preparation of microspheres. The experimental results showed that the drug: polymer ratio, stirring speed, concentration of surfactant, and volume of processing media played an important role in the formulation of microspheres. The prepared microspheres were characterized on the basis of particle size, scanning electron microscopy, entrapment efficiency and <italic>in vitro</italic> release. Taguchi experimental design helped to reduce the number of experiments. Optimized formulation exhibited Higuchi square root kinetics displaying diffusion from the microspheres as the main mechanism for drug release.

Enhanced Antibacterial Activity Of Doxycycline And Rifampicin Combination Loaded In Nanoparticles Against Intracellular Brucella Abortus

2021 ◽  
Vol 18 ◽  
Author(s):  
Shilpa Dawre ◽  
Padma V. Devarajan ◽  
Abdul Samad
Keyword(s):  
Antibacterial Activity ◽  
Brucella Abortus ◽  
Colloidal Stability ◽  
Polymeric Nanoparticles ◽  
Entrapment Efficiency ◽  
Diffusion Method ◽  
Human Macrophage ◽  
Scanning Calorimetry ◽  
Macrophage Cells

Background: Brucellosis is a zoonotic disease and prevalent in livestock animals. The bacteria reside inside the macrophage cells of host. The WHO endorsed the combination treatment therapy for brucellosis as compared to monotherapy to avoid relapse and resistance. Therefore, we developed nanoparticles incorporating doxycycline and rifampicin in combination. Objective: The aim of the study is to develop polymeric nanoparticles incorporating doxycycline as well as rifampicin and investigate the antibacterial activity of nanoparticles in U937 human macrophage cells infected with B. abortus. Methods: Polymeric nanoparticles were developed by emulsion-solvent diffusion method and characterization was done. Results: The nanoparticles with high entrapment efficiency of both drugs were developed successfully. Scanning electron microscopy revealed spherical morphology with a size ranging ~450nm, which can be easily engulfed by macrophages. Zeta potential confirmed colloidal stability. Differential scanning calorimetry and X-ray diffraction suggested amorphization of doxycycline and rifampicin in nanoparticles. Fourier transfer infrared spectroscopy could not confirm interaction of drugs with AOT. In vitro haemolysis study confirmed safety of nanoparticles (<10%) for IV administration. Further, nanoparticles revealed the sustained release of both drugs, which followed diffusion kinetics. Nanoparticles were found stable for 6 months as per WHO guidelines. The internalization study revealed nanoparticles can be easily uptake by U-937 human macrophage cells. The efficacy study demonstrated significantly high antibacterial activity of nanoparticles as compared to free drug solution in U937 human macrophage cells infected with Brucella abortus. Conclusion: It can be concluded that developed nanoparticles entrapping doxycycline and rifampicin combination could be considered as a promising delivery system for enhancing the antibacterial activity against Brucella abortus.

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

Mannose Conjugated Starch Nanoparticles for Preferential Targeting of Liver Cancer

2020 ◽  
Vol 17 ◽  
Author(s):  
Akhlesh Kumar Jain ◽  
Hitesh Sahu ◽  
Keerti Mishra ◽  
Suresh Thareja
Keyword(s):  
Side Effects ◽  
Liver Cancer ◽  
Entrapment Efficiency ◽  
Xrd Analysis ◽  
In Vitro Cytotoxicity ◽  
Physical Interaction ◽  
Scanning Calorimetry ◽  
Starch Nanoparticles

Aim: To design D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for site specific delivery. Background: Liver cancer is the third leading cause of death in world and fifth most often diagnosed cancer is the major global threat to public health. Treatment of liver cancer with conventional method bears several side effects, thus to undertake these side effects as a formulation challenge, it is necessary to develop novel target specific drug delivery system for the effective and better localization of drug into the proximity of target with restricting the movement of drug in normal tissues. Objective: To optimize and characterize the developed D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for effective treatment of liver cancer. Materials and methods: 5-FU loaded JFSSNPs were prepared and optimized formulation had higher encapsulation efficiency were conjugated with D-Mannose. These formulations were characterized for size, morphology, zeta potential, X-Ray Diffraction, and Differential Scanning Calorimetry. Potential of NPs were studied using in vitro cytotoxicity assay, in vivo kinetic studies and bio-distribution studies. Result and discussion: 5-Fluorouracil loaded NPs had particle size between 336 to 802nm with drug entrapment efficiency was between 64.2 to 82.3%. In XRD analysis, 5-FU peak was diminished in the diffractogram, which could be attributed to the successful incorporation of drug in amorphous form. DSC study suggests there was no physical interaction between 5- FU and Polymer. NPs showed sustained in vitro 5-FU release up to 2 hours. In vivo, mannose conjugated NPs prolonged the plasma level of 5-FU and assist selective accumulation of 5-FU in the liver (vs other organs spleen, kidney, lungs and heart) compared to unconjugated one and plain drug. Conclusion: In vivo, bio-distribution and plasma profile studies resulted in significantly higher concentration of 5- Fluorouracil liver suggesting that these carriers are efficient, viable, and targeted carrier of 5-FU treatment of liver cancer.

scholarly journals Formulation and development of metformin-loaded microspheres using Khaya senegalensis (Meliaceae) gum as co-polymer

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Chukwuebuka H. Ozoude ◽  
Chukwuemeka P. Azubuike ◽  
Modupe O. Ologunagba ◽  
Sejoro S. Tonuewa ◽  
Cecilia I. Igwilo
Keyword(s):  
Controlled Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Scanning Calorimetry ◽  
Khaya Senegalensis

Abstract Background Khaya gum is a bark exudate from Khaya senegalensis (Maliaecae) that has drug carrier potential. This study aimed to formulate and comparatively evaluate metformin-loaded microspheres using blends of khaya gum and sodium alginate. Khaya gum was extracted and subjected to preformulation studies using established protocols while three formulations (FA; FB and FC) of metformin (1% w/v)-loaded microspheres were prepared by the ionic gelation method using 5% zinc chloride solution as the cross-linker. The formulations contained 2% w/v blends of khaya gum and sodium alginate in the ratios of 2:3, 9:11, and 1:1, respectively. The microspheres were evaluated by scanning electron microscopy, Fourier transform-infrared spectroscopy, differential scanning calorimetry, entrapment efficiency, swelling index, and in vitro release studies. Results Yield of 28.48%, pH of 4.00 ± 0.05, moisture content (14.59% ± 0.50), and fair flow properties (Carr’s index 23.68 ± 1.91 and Hausner’s ratio 1.31 ± 0.03) of the khaya gum were obtained. FTIR analyses showed no significant interaction between pure metformin hydrochloride with excipients. Discrete spherical microspheres with sizes ranging from 1200 to 1420 μm were obtained. Drug entrapment efficiency of the microspheres ranged from 65.6 to 81.5%. The release of the drug from microspheres was sustained for the 9 h of the study as the cumulative release was 62% (FA), 73% (FB), and 80% (FC). The release kinetics followed Korsmeyer-Peppas model with super case-II transport mechanism. Conclusion Blends of Khaya senegalensis gum and sodium alginate are promising polymer combination for the preparation of controlled-release formulations. The blend of the khaya gum and sodium alginate produced microspheres with controlled release properties. However, the formulation containing 2:3 ratio of khaya gum and sodium alginate respectively produced microspheres with comparable controlled release profiles to the commercial brand metformin tablet.

Formulation and Evaluation of Benidipine Nanosuspension

2021 ◽  
pp. 4111-4116
Author(s):  
Sejal Patel ◽  
Anita P. Patel
Keyword(s):  
Particle Size ◽  
Water Solubility ◽  
Polymer Concentration ◽  
Oral Route ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Scanning Calorimetry ◽  
23 Factorial Design ◽  
Selection Of

In the interest of administration of dosage form oral route is most desirable and preferred method. After oral administration to get maximum therapeutic effect, major challenge is their water solubility. Water insoluble drug indicate insufficient bioavailability as well dissolution resulting in fluctuating plasma level. Benidipine (BND) is poorly water soluble antihypertensive drug has lower bioavailability. To improve bioavailability of Benidipine HCL, BND nanosuspension was formulated using media milling technique. HPMC E5 was used to stabilize nanosuspension. The effect of different important process parameters e.g. selection of polymer concentration X1(1.25 mg), stirring time X2 (800 rpm), selection of zirconium beads size X3 (0.4mm) were investigated by 23 factorial design to accomplish desired particle size and saturation solubility. The optimized batch had 408 nm particle size Y1, and showed in-vitro dissolution Y2 95±0.26 % in 30 mins and Zeta potential was -19.6. Differential scanning calorimetry (DSC) and FT-IR analysis was done to confirm there was no interaction between drug and polymer.

Mannosylated Solid Lipid Nanocarriers Of Chrysin To Target Gastric Cancer: Optimization and Cell line Study.

2021 ◽  
Vol 18 ◽  
Author(s):  
Sonia S. Pandey ◽  
Farhinbanu I. Shaikh ◽  
Arti R. Gupta ◽  
Rutvi J. Vaidya
Keyword(s):  
Gastric Cancer ◽  
Particle Size ◽  
Ex Vivo ◽  
Biological Effects ◽  
Entrapment Efficiency ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Solid Lipid ◽  
Lipid Nanocarriers

Background: Despite significant biological effects, the clinical use of chrysin has been restricted because of its poor oral bioavailability. Objective: The purpose of the present research was to investigate the targeting potential of Mannose decorated chrysin (5,7- dihydroxyflavone) loaded solid lipid nanocarrier (MC-SLNs) for gastric cancer. Methods: The Chrysin loaded SLNs (C-SLNs) were developed optimized, characterized and further mannosylated. The C-SLNs were developed with high shear homogenizer, optimized with 32 full factorial designs and characterized by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) and evaluated for particle size/polydispersity index, zeta-potential, entrapment efficiency, % release and haemolytic toxicity. The ex-vivo cytotoxicity study was performed on gastric cancer (ACG) and normal cell lines. Results: DSC and XRD data predict the chrysin encapsulation in lipid core and FTIR results confirm the mannosylation of C-SLNs. The optimized C-SLNs exhibited a narrow size distribution with a particle size of 285.65 nm. The % Entrapment Efficiency (%EE) and % controlled release were found to be 74.43% and 64.83%. Once C-SLNs were coated with mannose, profound change was observed in dependent variable - increase in the particle size of MC-SLNs (307.1 nm) was observed with 62.87% release and 70.8% entrapment efficiency. Further, the in vitro studies depicted MC- SLNs to be least hemolytic than pure chrysin and C-SLNs. MC-SLNs were most cytotoxic and were preferably taken up ACG tumor cells as evaluated against C-SLNs. Conclusion: These data suggested that the MC-SLNs demonstrated better biocompatibility and targeting efficiency to treat the gastric cancer.

Sign in / Sign up

Export Citation Format

Share Document