scholarly journals A deep learning integrated radiomics model for identification of coronavirus disease 2019 using computed tomography

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xiaoguo Zhang ◽  
Dawei Wang ◽  
Jiang Shao ◽  
Song Tian ◽  
Weixiong Tan ◽  
...  
Keyword(s):  
Deep Learning ◽  
Ct Images ◽  
Community Acquired Pneumonia ◽  
Machine Learning Algorithms ◽  
Multi Layer Perceptron ◽  
Selection Methods ◽  
Medical Centers ◽  
Global Pandemic ◽  
Diagnostic Time ◽  
Logistic Regression Classifier

AbstractSince its first outbreak, Coronavirus Disease 2019 (COVID-19) has been rapidly spreading worldwide and caused a global pandemic. Rapid and early detection is essential to contain COVID-19. Here, we first developed a deep learning (DL) integrated radiomics model for end-to-end identification of COVID-19 using CT scans and then validated its clinical feasibility. We retrospectively collected CT images of 386 patients (129 with COVID-19 and 257 with other community-acquired pneumonia) from three medical centers to train and externally validate the developed models. A pre-trained DL algorithm was utilized to automatically segment infected lesions (ROIs) on CT images which were used for feature extraction. Five feature selection methods and four machine learning algorithms were utilized to develop radiomics models. Trained with features selected by L1 regularized logistic regression, classifier multi-layer perceptron (MLP) demonstrated the optimal performance with AUC of 0.922 (95% CI 0.856–0.988) and 0.959 (95% CI 0.910–1.000), the same sensitivity of 0.879, and specificity of 0.900 and 0.887 on internal and external testing datasets, which was equivalent to the senior radiologist in a reader study. Additionally, diagnostic time of DL-MLP was more efficient than radiologists (38 s vs 5.15 min). With an adequate performance for identifying COVID-19, DL-MLP may help in screening of suspected cases.

scholarly journals Baby Cry Detection in Domestic Environment using Deep Learning

2017 ◽  
Author(s):  
Hans IJzerman
Keyword(s):  
Logistic Regression ◽  
Deep Learning ◽  
Electrical Engineering ◽  
Automatic Detection ◽  
Low Complexity ◽  
Machine Learning Algorithms ◽  
Domestic Environment ◽  
International Conference ◽  
Ieee International Conference ◽  
Logistic Regression Classifier

Automatic detection of a baby cry in audio signals is an essential step in applications such as remote baby monitoring. It is also important for researchers, who study the relation between baby cry patterns and various health or developmental parameters. In this paper, we propose two machine-learning algorithms for automatic detection of baby cry in audio recordings. The first algorithm is a low-complexity logistic regression classifier, used as a reference. To train this classifier, we extract features such as Mel-frequency cepstrum coefficients, pitch and formants from the recordings. The second algorithm uses a dedicated convolutional neural network (CNN), operating on log Mel-filter bank representation of the recordings. Performance evaluation of the algorithms is carried out using an annotated database containing recordings of babies (0-6 months old) in domestic environments. In addition to baby cry, these recordings contain various types of domestic sounds, such as parents talking and door opening. The CNN classifier is shown to yield considerably better results compared to the logistic regression classifier, demonstrating the power of deep learning when applied to audio processing.This paper was published in IEEE International Conference on the Science of Electrical Engineering:Lavner, Y., Cohen, R., Ruinskiy, D., & IJzerman, H. (2016, November). Baby cry detection in domestic environment using deep learning. In Science of Electrical Engineering (ICSEE), IEEE International Conference on the Science of Electrical Engineering (pp. 1-5). IEEE.

A Survey of Network Embedding for Drug Analysis and Prediction

2020 ◽  
Vol 21 ◽  
Author(s):  
Zhixian Liu ◽  
Qingfeng Chen ◽  
Wei Lan ◽  
Jiahai Liang ◽  
Yiping Pheobe Chen ◽  
...  
Keyword(s):  
Deep Learning ◽  
Protein Function ◽  
Dimensional Space ◽  
Auxiliary Information ◽  
Matrix Decomposition ◽  
Drug Analysis ◽  
Machine Learning Algorithms ◽  
Superior Performance ◽  
Network Embedding ◽  
Similarity Estimation

: Traditional network-based computational methods have shown good results in drug analysis and prediction. However, these methods are time consuming and lack universality, and it is difficult to exploit the auxiliary information of nodes and edges. Network embedding provides a promising way for alleviating the above problems by transforming network into a low-dimensional space while preserving network structure and auxiliary information. This thus facilitates the application of machine learning algorithms for subsequent processing. Network embedding has been introduced into drug analysis and prediction in the last few years, and has shown superior performance over traditional methods. However, there is no systematic review of this issue. This article offers a comprehensive survey of the primary network embedding methods and their applications in drug analysis and prediction. The network embedding technologies applied in homogeneous network and heterogeneous network are investigated and compared, including matrix decomposition, random walk, and deep learning. Especially, the Graph neural network (GNN) methods in deep learning are highlighted. Further, the applications of network embedding in drug similarity estimation, drug-target interaction prediction, adverse drug reactions prediction, protein function and therapeutic peptides prediction are discussed. Several future potential research directions are also discussed.

COVID-19 pneumonia diagnosis using a simple 2D deep learning framework with a single chest CT image (Preprint)

2020 ◽  
Author(s):  
Jinseok Lee
Keyword(s):  
Deep Learning ◽  
Diagnostic Performance ◽  
Ct Images ◽  
Chest Ct ◽  
University Hospital ◽  
Detection Accuracy ◽  
Ct Image ◽  
Test Dataset ◽  
Learning Framework ◽  
Testing Dataset

BACKGROUND The coronavirus disease (COVID-19) has explosively spread worldwide since the beginning of 2020. According to a multinational consensus statement from the Fleischner Society, computed tomography (CT) can be used as a relevant screening tool owing to its higher sensitivity for detecting early pneumonic changes. However, physicians are extremely busy fighting COVID-19 in this era of worldwide crisis. Thus, it is crucial to accelerate the development of an artificial intelligence (AI) diagnostic tool to support physicians. OBJECTIVE We aimed to quickly develop an AI technique to diagnose COVID-19 pneumonia and differentiate it from non-COVID pneumonia and non-pneumonia diseases on CT. METHODS A simple 2D deep learning framework, named fast-track COVID-19 classification network (FCONet), was developed to diagnose COVID-19 pneumonia based on a single chest CT image. FCONet was developed by transfer learning, using one of the four state-of-art pre-trained deep learning models (VGG16, ResNet50, InceptionV3, or Xception) as a backbone. For training and testing of FCONet, we collected 3,993 chest CT images of patients with COVID-19 pneumonia, other pneumonia, and non-pneumonia diseases from Wonkwang University Hospital, Chonnam National University Hospital, and the Italian Society of Medical and Interventional Radiology public database. These CT images were split into a training and a testing set at a ratio of 8:2. For the test dataset, the diagnostic performance to diagnose COVID-19 pneumonia was compared among the four pre-trained FCONet models. In addition, we tested the FCONet models on an additional external testing dataset extracted from the embedded low-quality chest CT images of COVID-19 pneumonia in recently published papers. RESULTS Of the four pre-trained models of FCONet, the ResNet50 showed excellent diagnostic performance (sensitivity 99.58%, specificity 100%, and accuracy 99.87%) and outperformed the other three pre-trained models in testing dataset. In additional external test dataset using low-quality CT images, the detection accuracy of the ResNet50 model was the highest (96.97%), followed by Xception, InceptionV3, and VGG16 (90.71%, 89.38%, and 87.12%, respectively). CONCLUSIONS The FCONet, a simple 2D deep learning framework based on a single chest CT image, provides excellent diagnostic performance in detecting COVID-19 pneumonia. Based on our testing dataset, the ResNet50-based FCONet might be the best model, as it outperformed other FCONet models based on VGG16, Xception, and InceptionV3.

The Effectiveness of the Fused Weighted Filter Feature Selection Method to Improve Software Fault Prediction

2016 ◽  
Vol 8 ◽  
pp. 5 ◽  
Author(s):  
Fatemeh Alighardashi ◽  
Mohammad Ali Zare Chahooki
Keyword(s):  
Feature Selection ◽  
Feature Selection Method ◽  
Selection Method ◽  
Machine Learning Algorithms ◽  
Fault Prediction ◽  
Filter Method ◽  
Selection Methods ◽  
Software Projects ◽  
Software Fault Prediction ◽  
Software Fault

Improving the software product quality before releasing by periodic tests is one of the most expensive activities in software projects. Due to limited resources to modules test in software projects, it is important to identify fault-prone modules and use the test sources for fault prediction in these modules. Software fault predictors based on machine learning algorithms, are effective tools for identifying fault-prone modules. Extensive studies are being done in this field to find the connection between features of software modules, and their fault-prone. Some of features in predictive algorithms are ineffective and reduce the accuracy of prediction process. So, feature selection methods to increase performance of prediction models in fault-prone modules are widely used. In this study, we proposed a feature selection method for effective selection of features, by using combination of filter feature selection methods. In the proposed filter method, the combination of several filter feature selection methods presented as fused weighed filter method. Then, the proposed method caused convergence rate of feature selection as well as the accuracy improvement. The obtained results on NASA and PROMISE with ten datasets, indicates the effectiveness of proposed method in improvement of accuracy and convergence of software fault prediction.

scholarly journals A deep learning method for automatic segmentation of the bony orbit in MRI and CT images

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jared Hamwood ◽  
Beat Schmutz ◽  
Michael J. Collins ◽  
Mark C. Allenby ◽  
David Alonso-Caneiro
Keyword(s):  
Deep Learning ◽  
Human Performance ◽  
Automatic Segmentation ◽  
Ct Images ◽  
Human Observer ◽  
In Series ◽  
Magnetic Resonance Imaging Mri ◽  
High Degree ◽  
Orbital Region ◽  
Ct And Mri

AbstractThis paper proposes a fully automatic method to segment the inner boundary of the bony orbit in two different image modalities: magnetic resonance imaging (MRI) and computed tomography (CT). The method, based on a deep learning architecture, uses two fully convolutional neural networks in series followed by a graph-search method to generate a boundary for the orbit. When compared to human performance for segmentation of both CT and MRI data, the proposed method achieves high Dice coefficients on both orbit and background, with scores of 0.813 and 0.975 in CT images and 0.930 and 0.995 in MRI images, showing a high degree of agreement with a manual segmentation by a human expert. Given the volumetric characteristics of these imaging modalities and the complexity and time-consuming nature of the segmentation of the orbital region in the human skull, it is often impractical to manually segment these images. Thus, the proposed method provides a valid clinical and research tool that performs similarly to the human observer.

scholarly journals Integrating Machine/Deep Learning Methods and Filtering Techniques for Reliable Mineral Phase Segmentation of 3D X-ray Computed Tomography Images

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4595
Author(s):  
Parisa Asadi ◽  
Lauren E. Beckingham
Keyword(s):  
Machine Learning ◽  
Deep Learning ◽  
Random Forest ◽  
Ct Images ◽  
Ct Imaging ◽  
Learning Method ◽  
Learning Methods ◽  
X Ray ◽  
Machine Learning Methods ◽  
Filtering Techniques

X-ray CT imaging provides a 3D view of a sample and is a powerful tool for investigating the internal features of porous rock. Reliable phase segmentation in these images is highly necessary but, like any other digital rock imaging technique, is time-consuming, labor-intensive, and subjective. Combining 3D X-ray CT imaging with machine learning methods that can simultaneously consider several extracted features in addition to color attenuation, is a promising and powerful method for reliable phase segmentation. Machine learning-based phase segmentation of X-ray CT images enables faster data collection and interpretation than traditional methods. This study investigates the performance of several filtering techniques with three machine learning methods and a deep learning method to assess the potential for reliable feature extraction and pixel-level phase segmentation of X-ray CT images. Features were first extracted from images using well-known filters and from the second convolutional layer of the pre-trained VGG16 architecture. Then, K-means clustering, Random Forest, and Feed Forward Artificial Neural Network methods, as well as the modified U-Net model, were applied to the extracted input features. The models’ performances were then compared and contrasted to determine the influence of the machine learning method and input features on reliable phase segmentation. The results showed considering more dimensionality has promising results and all classification algorithms result in high accuracy ranging from 0.87 to 0.94. Feature-based Random Forest demonstrated the best performance among the machine learning models, with an accuracy of 0.88 for Mancos and 0.94 for Marcellus. The U-Net model with the linear combination of focal and dice loss also performed well with an accuracy of 0.91 and 0.93 for Mancos and Marcellus, respectively. In general, considering more features provided promising and reliable segmentation results that are valuable for analyzing the composition of dense samples, such as shales, which are significant unconventional reservoirs in oil recovery.

scholarly journals Semantic segmentation of PolSAR image data using advanced deep learning model

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rajat Garg ◽  
Anil Kumar ◽  
Nikunj Bansal ◽  
Manish Prateek ◽  
Shashi Kumar
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Deep Learning ◽  
Urban Area ◽  
Urban Areas ◽  
Learning Algorithms ◽  
Semantic Segmentation ◽  
Learning Model ◽  
Machine Learning Algorithms ◽  
Deep Learning Model

AbstractUrban area mapping is an important application of remote sensing which aims at both estimation and change in land cover under the urban area. A major challenge being faced while analyzing Synthetic Aperture Radar (SAR) based remote sensing data is that there is a lot of similarity between highly vegetated urban areas and oriented urban targets with that of actual vegetation. This similarity between some urban areas and vegetation leads to misclassification of the urban area into forest cover. The present work is a precursor study for the dual-frequency L and S-band NASA-ISRO Synthetic Aperture Radar (NISAR) mission and aims at minimizing the misclassification of such highly vegetated and oriented urban targets into vegetation class with the help of deep learning. In this study, three machine learning algorithms Random Forest (RF), K-Nearest Neighbour (KNN), and Support Vector Machine (SVM) have been implemented along with a deep learning model DeepLabv3+ for semantic segmentation of Polarimetric SAR (PolSAR) data. It is a general perception that a large dataset is required for the successful implementation of any deep learning model but in the field of SAR based remote sensing, a major issue is the unavailability of a large benchmark labeled dataset for the implementation of deep learning algorithms from scratch. In current work, it has been shown that a pre-trained deep learning model DeepLabv3+ outperforms the machine learning algorithms for land use and land cover (LULC) classification task even with a small dataset using transfer learning. The highest pixel accuracy of 87.78% and overall pixel accuracy of 85.65% have been achieved with DeepLabv3+ and Random Forest performs best among the machine learning algorithms with overall pixel accuracy of 77.91% while SVM and KNN trail with an overall accuracy of 77.01% and 76.47% respectively. The highest precision of 0.9228 is recorded for the urban class for semantic segmentation task with DeepLabv3+ while machine learning algorithms SVM and RF gave comparable results with a precision of 0.8977 and 0.8958 respectively.

scholarly journals New Results on Radioactive Mixture Identification and Relative Count Contribution Estimation

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4155
Author(s):  
Bulent Ayhan ◽  
Chiman Kwan
Keyword(s):  
Deep Learning ◽  
Noise Source ◽  
Simulated Data ◽  
Nuclear Material ◽  
Machine Learning Algorithms ◽  
Detector Response ◽  
Nuclear Materials ◽  
Ratio Estimation ◽  
Analysis Software ◽  
Detector Distance

Detecting nuclear materials in mixtures is challenging due to low concentration, environmental factors, sensor noise, source-detector distance variations, and others. This paper presents new results on nuclear material identification and relative count contribution (also known as mixing ratio) estimation for mixtures of materials in which there are multiple isotopes present. Conventional and deep-learning-based machine learning algorithms were compared. Realistic simulated data using Gamma Detector Response and Analysis Software (GADRAS) were used in our comparative studies. It was observed that a deep learning approach is highly promising.

Sign in / Sign up

Export Citation Format

Share Document