scholarly journals Detection of nanoparticles suspended in a light scattering medium

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yan Ye ◽  
David Y. H. Pui
Keyword(s):  
Light Scattering ◽  
Visible Light ◽  
Light Wave ◽  
Incident Light ◽  
Scattering Medium ◽  
Light Interference ◽  
Potential Applications ◽  
Power Frequency ◽  
Suspended Nanoparticles ◽  
Incident Light Wave

AbstractIntentionally intensifying the light scattering of medium molecules can allow the detection of suspended nanoparticles under conditions not suitable for conventional optical microscopies or laser particle counters. Here, we demonstrate how the collective light scattering of medium molecules and nanoparticles is imaged in response to the power, frequency, and oscillating direction of the incident light wave electric field, and how this response can be used to distinguish between nanoparticles and microparticles, such as viruses or bacteria. Under conditions that the medium light scattering is intensified, suspended nanoparticles appear as magnified shiny moving dots superimposed on the quasi-steady background of medium light scattering. Utilizing the visual enlargement resulted from the enhanced light scattering and possible light interference, we can detect directly suspended nanoparticles that are much smaller than visible light wavelengths even in unopened water bottles or other large containers. This suggests new approaches for detecting nanoparticles with many potential applications.

Fourier Analysis of Digital STEM Images in the Study of Transparency in Human Cornea And Sclera

1988 ◽  
Vol 46 ◽  
pp. 178-179
Author(s):  
S . Vaezy
Keyword(s):  
Fourier Transform ◽  
Fourier Analysis ◽  
Visible Light ◽  
Light Wave ◽  
Incident Light ◽  
Human Cornea ◽  
Quantitative Measurements ◽  
Spatial Fluctuations ◽  
The Fourier Transform ◽  
Incident Light Wave

The structure of transparent human cornea is similar to that of the opaque human sclera, and they both consist of collagen fibers embedded in a mucopolysaccharide matrix.[1] This similarity in structure and composition, in contrast to a large difference in turbidity, presents an important question regarding the basis of transparency in the cornea.In general, a transparent structure permits most of the incident light to be transmitted, whereas an opaque structure scatters it. Scattering of an incident light wave occurs when the spatial fluctuations in the index of the refraction of the medium have dimensions close to the wavelength of visible light.[2] To analyze spatial fluctuations in cornea and sclera we have developed techniques based on Fourier analysis of digital STEM images.Fourier analysis allows direct quantitative measurements of the fluctuations in any signal. The signal is resolved into its constituent sinusoids or Fourier components. Amplitude, and frequency of each component are quantitatively obtained using the Fourier Transform (FT).

scholarly journals 2D Octagon-Structure Carbon and Its Polarization Resolved Raman Spectra

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2252
Author(s):  
Chunshan He ◽  
Weiliang Wang
Keyword(s):  
Raman Spectra ◽  
Density Functional ◽  
Light Wave ◽  
Incident Light ◽  
Vibrational Properties ◽  
Polarization Angle ◽  
Two Dimensional ◽  
Functional Theory ◽  
New Phase ◽  
Incident Light Wave

We predict a new phase of two-dimensional carbon with density functional theory (DFT). It was found to be semimetal with two Dirac points. The vibrational properties and the polarization resolved Raman spectra of the carbon monolayer are predicted. There are five Raman active modes: 574 cm−1 (Eg), 1112 cm−1 (B1g), 1186 cm−1 (B2g), 1605 cm−1 (B2g) and 1734 cm−1 (A1g). We consider the incident light wave vector to be perpendicular and parallel to the plane of the carbon monolayer. By calculating Raman tensor of each Raman active mode, we obtained polarization angle dependent Raman intensities. Our results will help materials scientists to identify the existence and orientation of octagon-structure carbon monolayer when they are growing it.

Stress Whitening in Polypropylene. I. Light Scattering Theory and Model Experiments

1995 ◽  
Vol 60 (11) ◽  
pp. 1875-1887 ◽  
Author(s):  
Jaroslav Holoubek ◽  
Miroslav Raab
Keyword(s):  
Refractive Index ◽  
Light Scattering ◽  
Incident Light ◽  
Polymeric Materials ◽  
Wavelength Dependence ◽  
Theoretical Background ◽  
Surrounding Matrix ◽  
Embedded Particles ◽  
The One ◽  
Stress Whitening

Theoretical background for an optical method is presented which makes it possible to distinguish unambiguously between voids and particles as light scattering sites in polymeric materials. Typical dependences of turbidity as a function of diameter of scattering elements, their volume fractions and also turbidity curves as a function of the wavelength of the incident light were calculated, based both on the Lorenz-Mie theory and the fluctuation theory. Such dependences calculated for polypropylene-containing voids on the one hand and particles, differing only slightly from the surrounding matrix in their refractive index, on the other hand, are markedly different. The most significant results are: (i) Turbidity is at least by two orders of magnitude larger for voids in comparison to embedded particles of ethylene-propylene (EPDM) rubber of the same size, concentration and at the same wavelength. (ii) The wavelength dependence of turbidity for EPDM particles and the inherent refractive index fluctuations in the polypropylene matrix is much steeper as compared to voids for all considered diameters (0.1-10 μm). Thus, the nature of stress whitening in complex polymeric materials can be determined from turbidity measurements.

scholarly journals Microstructure and Photothermal Conversion Performance of Ti/(Mo-TiAlN)/(Mo-TiAlON)/Al2O3 Selective Absorbing Film for Non-Vacuum High-Temperature Applications

2020 ◽  
Vol 11 (1) ◽  
pp. 124
Author(s):  
Haibin Geng ◽  
Hanzhe Ye ◽  
Xingliang Chen ◽  
Sibin Du
Keyword(s):  
Visible Light ◽  
Near Infrared ◽  
Substitutional Solid Solution ◽  
Experimental Conditions ◽  
Al Content ◽  
Spectrum Range ◽  
Light Interference ◽  
Transmission Electron ◽  
Conversion Performance ◽  
Columnar Grain

This paper aims to clarify the phase composition in each sub-layer of tandem absorber TiMoAlON film and verify its thermal stability. The deposited multilayer Ti/(Mo-TiAlN)/(Mo-TiAlON)/Al2O3 films include an infrared reflectance layer, light interference absorptive layers with different metal doping amounts, and an anti-reflectance layer. The layer thicknesses of Ti, Mo-TiAlN, Mo-TiAlON, and Al2O3 are 100, 300, 200, and 80 nm, respectively. Al content increases to 12 at.% and the ratio of N/O is nearly 0.1, which means nitride continuously changes to oxide. According to X-ray Diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) results, the diffraction peak that appears at 2θ = 40° demonstrates that Mo element aggregates in the substitutional solid solution (Ti,Al)(O,N) columnar grain. TiMoAlON films have low reflectivity in the spectrum range of 300–900 nm. When Al content is more than 10 at.%, absorptivity is almost in the spectrum range from visible to infrared, but absorptivity decreases in the ultraviolet spectrum range. When Al content is increased to 12 at.%, absorptivity α decreases by 0.05 in the experimental conditions. After baking in atmosphere at 500 °C for 8 h, the film has the highest absorptivity when doped with 2 at.% Mo. In the visible-light range, α = 0.97, and in the whole ultraviolet-visible-light near-infrared spectrum range, α = 0.94, and emissivity ε = 0.02 at room temperature and ε = 0.10 at 500 °C.

An approach to ensure joint illumination & communication performance of a forward error corrected indoor visible light communication (VLC) system in presence of ambient light interference

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sourish Chatterjee ◽  
Biswanath Roy
Keyword(s):  
Visible Light ◽  
Bit Error Rate ◽  
Error Rate ◽  
Light Emitting Diode ◽  
Visible Light Communication ◽  
Ambient Light ◽  
Ambient Illumination ◽  
Communication Performance ◽  
Light Interference ◽  
Forward Error

AbstractIn recent time of looming radio frequency (RF) spectrum crisis, visible light communication using lighting infrastructure emerged as a potential alternative at an indoor environment. This paper addresses the setback associated with ambient light interference in an indoor Visible Light Communication (VLC) system to ensure joint communication and illumination performance inside an office room. A novel VLC architecture with suitable white light emitting diode (WLED) luminaire arrangement is presented to minimize the dispersion of signal to interference plus noise ratio (SINR) across the room. Luminaires are categorized in two groups viz. data transmitting illuminants and illuminants for lighting purpose. The first group is dedicated to transmit data as well as serves the purpose of illumination. The other set creates only ambient illumination to achieve quality lighting attributes. The proposed forward error corrected receiver configuration discards the ambient light noise originated by the illuminants that serve the ambient illumination. Tail biting convolutional encoder and viterbi decoder are used at the encoding section of the transmitter and decoding section of the receiver respectively to improve bit error rate. Results obtained through MATLAB simulation shows better average bit error rate (BER) in the order of 10−8 measured at uniformly distributed 25 grid points over the working plane. At the same time achieved average horizontal illuminance with good uniformity comply with ISO recommendation.

Synthesis of single-crystalline GeS nanoribbons for high sensitivity visible-light photodetectors

2015 ◽  
Vol 3 (31) ◽  
pp. 8074-8079 ◽  
Author(s):  
Changyong Lan ◽  
Chun Li ◽  
Yi Yin ◽  
Huayang Guo ◽  
Shuai Wang
Keyword(s):  
Visible Light ◽  
Vapor Deposition ◽  
High Performance ◽  
Incident Light ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Single Crystalline ◽  
Promising Application ◽  
Photo Detection ◽  
First Time

Single-crystalline GeS nanoribbons were synthesized by chemical vapor deposition for the first time. The nanoribbon photodetectors respond to the entire visible incident light with a response edge at around 750 nm and a high responsivity, indicating their promising application for high performance broadband visible-light photo-detection.

Sign in / Sign up

Export Citation Format

Share Document