scholarly journals A novel nanofiltration membrane inspired by an asymmetric porous membrane for selective fractionation of monovalent anions in electrodialysis

RSC Advances ◽  
2018 ◽  
Vol 8 (53) ◽  
pp. 30502-30511 ◽  
Author(s):  
Jincheng Ding ◽  
Shanshan Yang ◽  
Jiefeng Pan ◽  
Yu Zheng ◽  
Arcadio Sotto ◽  
...  

The present study describes the synthesis of new nanofiltration membranes inspired by asymmetric porous membranes used as monovalent anion selective membranes for electro-membrane separation.

1997 ◽  
Vol 35 (8) ◽  
pp. 137-144 ◽  
Author(s):  
Tsuyoshi Nomura ◽  
Takao Fujii ◽  
Motoyuki Suzuki

Porous membrane of poly(tetrafluoroethylene) (PTFE) was formed on the surface of porous ceramic tubes by means of heat treatment of the PTFE particles deposit layer prepared by filtering PTFE microparticles emulsified in aqueous phase. By means of inert gas permeation, pore size was determined and compared with scanning electron micrograph observation. Also rejection measurement of aqueous dextran solutions of wide range of molecular weights showed consistent results regarding the pore size. Since the membrane prepared by this method is stable and has unique features derived from PTFE, it is expected that the membrane has interesting applications in the field of water treatment. Membrane separation of activated sludge by this composite membrane and original ceramics membrane showed that the PTFE membrane gives better detachability of the cake layer formed on the membrane. This might be due to the hydrophobic nature of the PTFE skin layer.


2021 ◽  
pp. 152808372110142
Author(s):  
Ariana Khakpour ◽  
Michael Gibbons ◽  
Sanjeev Chandra

Porous membranes find natural application in various fields and industries. Water condensation on membranes can block pores, reduce vapour transmissibility, and diminish the porous membranes' performance. This research investigates the rate of water vapour transmission through microporous nylon and nanofibrous Gore-Tex membranes. Testing consisted of placing the membrane at the intersection of two chambers with varied initial humidity conditions. One compartment is initially set to a high ([Formula: see text]water vapour concentration and the other low ([Formula: see text], with changes in humidity recorded as a function of time. The impact of pore blockage was explored by pre-wetting the membranes with water or interposing glycerine onto the membrane pores before testing. Pore blockage was measured using image analysis for the nylon membrane. The mass flow rate of water vapour ( ṁv) diffusing through a porous membrane is proportional to both its area (A) and the difference in vapour concentration across its two faces ([Formula: see text], such that [Formula: see text] where K is defined as the moisture diffusion coefficient. Correlations are presented for the variation of K as a function of [Formula: see text]. Liquid contamination on the porous membrane has been shown to reduce the moisture diffusion rate through the membrane due to pore blockage and the subsequent reduced open area available for vapour diffusion. Water evaporation from the membrane's surface was observed to add to the mass of vapour diffusing through the membrane. A model was developed to predict the effect of membrane wetting on vapour diffusion and showed good agreement with experimental data.


Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 619
Author(s):  
Hans Wijaya ◽  
Kengo Sasaki ◽  
Prihardi Kahar ◽  
Nanik Rahmani ◽  
Euis Hermiati ◽  
...  

Xylooligosaccharides (XOS) are attracting an ever-increasing amount of interest for use as food prebiotics. In this study, we used efficient membrane separation technology to convert lignocellulosic materials into a renewable source of XOS. This study revealed a dual function of nanofiltration membranes by first achieving a high yield of xylobiose (a main component of XOS) from alkali-pretreated empty fruit bunch (EFB) hydrolysate, and then by achieving a high degree of separation for xylose as a monosaccharide product. Alkali pretreatment could increase the xylan content retention of raw EFB from 23.4% to 26.9%, which eventually contributed to higher yields of both xylobiose and xylose. Nanofiltration increased the total amount of XYN10Ks_480 endoxylanase produced from recombinant Streptomyces lividans 1326 without altering its specific activity. Concentrated XYN10Ks_480 endoxylanase was applied to the recovery of both xylobiose and xylose from alkali-pretreated EFB hydrolysate. Xylobiose and xylose yields reached 41.1% and 17.3%, respectively, and when unconcentrated XYN10Ks_480 endoxylanase was applied, those yields reached 35.1% and 8.3%, respectively. The last step in nanofiltration was to separate xylobiose over xylose, and 41.3 g.L−1 xylobiose (90.1% purity over xylose) was achieved. This nanofiltration method should shorten the processes used to obtain XOS as a high-value end product from lignocellulosic biomass.


2020 ◽  
Vol 21 (18) ◽  
pp. 6526
Author(s):  
Jarrod Schiffbauer ◽  
Evgeny Demekhin ◽  
Georgy Ganchenko

Numerical investigation of the underlimiting, limiting, and overlimiting current modes and their transitions in imperfect ion-selective membranes with fluid flow through permitted through the membrane is presented. The system is treated as a three layer composite system of electrolyte-porous membrane-electrolyte where the Nernst–Planck–Poisson–Stokes system of equations is used in the electrolyte, and the Darcy–Brinkman approach is employed in the nanoporous membrane. In order to resolve thin Debye and Darcy layers, quasi-spectral methods are applied using Chebyshev polynomials for their accumulation of zeros and, hence, best resolution in the layers. The boundary between underlimiting and overlimiting current regimes is subject of linear stability analysis, where the transition to overlimiting current is assumed due to the electrokinetic instability of the one-dimensional quiescent state. However, the well-developed overlimiting current is inherently a problem of nonlinear stability and is subject of the direct numerical simulation of the full system of equations. Both high and low fixed charge density membranes (low- and high concentration electrolyte solutions), acting respectively as (nearly) perfect or imperfect membranes, are considered. The perfect membrane is adequately described by a one-layer model while the imperfect membrane has a more sophisticated response. In particular, the direct transition from underlimiting to overlimiting currents, bypassing the limiting currents, is found to be possible for imperfect membranes (high-concentration electrolyte). The transition to the overlimiting currents for the low-concentration electrolyte solutions is monotonic, while for the high-concentration solutions it is oscillatory. Despite the fact that velocities in the porous membrane are much smaller than in the electrolyte region, it is further demonstrated that they can dramatically influence the nature and transition to the overlimiting regimes. A map of the bifurcations, transitions, and regimes is constructed in coordinates of the fixed membrane charge and the Darcy number.


Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 269 ◽  
Author(s):  
Yu-Hsuan Chiao ◽  
Tanmoy Patra ◽  
Micah Belle Marie Yap Ang ◽  
Shu-Ting Chen ◽  
Jorge Almodovar ◽  
...  

Nanofiltration membranes have evolved as a promising solution to tackle the clean water scarcity and wastewater treatment processes with their low energy requirement and environment friendly operating conditions. Thin film composite nanofiltration membranes with high permeability, and excellent antifouling and antibacterial properties are important component for wastewater treatment and clean drinking water production units. In the scope of this study, thin film composite nanofiltration membranes were fabricated using polyacrylonitrile (PAN) support and fast second interfacial polymerization modification methods by grafting polyethylene amine and zwitterionic sulfobutane methacrylate moieties. Chemical and physical alteration in structure of the membranes were characterized using methods like ATR-FTIR spectroscopy, XPS analysis, FESEM and AFM imaging. The effects of second interfacial polymerization to incorporate polyamide layer and ‘ion pair’ characteristics, in terms of water contact angle and surface charge analysis was investigated in correlation with nanofiltration performance. Furthermore, the membrane characteristics in terms of antifouling properties were evaluated using model protein foulants like bovine serum albumin and lysozyme. Antibacterial properties of the modified membranes were investigated using E. coli as model biofoulant. Overall, the effect of second interfacial polymerization without affecting the selectivity layer of nanofiltration membrane for their potential large-scale application was investigated in detail.


2014 ◽  
Vol 70 (2) ◽  
Author(s):  
K. C. Chong ◽  
S. O. Lai

Membrane distillation (MD) is an emerging membrane separation technique which provides a competition for the conventional separation process such as reverse osmosis (RO) and thermal distillation. The MD process was first developed in the 1960s, but only recently garnered the interest from academics and industry due to the advancement of membrane fabrication technique. The MD is a thermal-driven process which has an ability to be integrated with renewable energy and/or waste heat. The driving force of the MD process is vapor pressure difference where the feed vapor is transported through the non-wetted hydrophobic porous membrane to the permeate regime where permeate will be collected via condensation. As such, the MD possesses a theoretical rejection rate of nearly 100%. This review addressed the recent progress of the MD process in terms of membrane fabrication, integration with renewable energy and/or other membrane separation process as well as applications of MD in various industries. This paper may serve as an update of the recent progress of MD which in some way, is able to help the researchers explore the new investigation field in MD for it to be commercially more viable.


RSC Advances ◽  
2016 ◽  
Vol 6 (48) ◽  
pp. 42684-42692 ◽  
Author(s):  
Jinglong Li ◽  
Fu Liu ◽  
Xuemin Yu ◽  
Ziyang Wu ◽  
Yunze Wang ◽  
...  

The Hep-APTES/PLA was synthesized through the amidation reaction and results showed that surface heparinization significantly improved the hemocompatibility of PLA porous membrane.


2012 ◽  
Author(s):  
A. L. Ahmad ◽  
B. S. Ooi ◽  
M. M. D. Zulkali ◽  
J. P. Choudhury

Membran penurasan nano yang diubahsuai daripada polipiperazinamida telah dihasilkan dalam masa tindakbalas yang berbeza. Membran berkenaan dicirikan terhadap liang saiz dan ketebalan berkesan/keporosan dengan menggunakan model DSPM. Liang membran menjadi kecil pada permulaan tindakbalas disebabkan proses pengaitan bersilang tetapi liang saiz akan bertambah untuk jangkamasa tindakbalas yang lebih lama kerana kelemahan dinding liang membran. Walau bagaimanapun, nilai ketebalan berkesan/keporosan bertambah dengan masa dan menjadi stabil selepas 60s. Kesan masa tindakbalas terhadap liang saiz adalah tidak ketara berbanding dengan kesannya terhadap ketebalan berkesan/keporosan. Selama 2 minit tindakbalas, nilai ketebalan berkesan/keporosan untuk lapisan penapis berubah sebanyak 150%. Kata kunci: Penurasan Nano, masa tindakbalas, saiz liang, ketebalan berkesan/keporosan Modified polypiperazinamide nanofiltration membranes were fabricated under different reaction time. The membranes were characterized for its pore size and effective thickness/porosity using Donnan Steric Pore Flow Model. The pore size was reduced initially due to the crosslinking process but becomes larger at longer reaction time because of the weaker pores wall. On the other hand, the effective thickness/porosity grows with polymerization time and becomes constant after 60s. The effect of reaction time on the pore size is not as significant as effective thickness/porosity. Within 2 minutes of polymerization time, the effective thickness of the barrier layer would vary about 150%. Key words: Nanofiltration, reaction time, pore size, effective thickness/porosity


2021 ◽  
pp. 088532822110502
Author(s):  
Adarsh Rajeswari Krishnankutty ◽  
Shamna Najeema Sulaiman ◽  
Arun Sadasivan ◽  
Roy Joseph ◽  
Manoj Komath

This report demonstrates the development of a degradable quaternary ammonium derivative of chitosan (QC) composited with strontium-containing nanoapatite (SA) for bioactivity. The material was made as porous membrane by solution casting and freeze drying, for guided tissue regeneration (GTR) applications. The micromorphology, tensile strength, suture pull-out strength, degradation ( in vitro, in phosphate buffered saline), and cytocompatibility (using human periodontal ligament cells) were tested to investigate the effect of derivatization and SA addition. The porosity of the membranes increased with increasing SA content and so did the tensile strength and the degradation. The suture pull-out strength, however, showed a decrease. The cell culture evaluation endorsed biocompatibility. The composite with 1.5 mg SA per 1 mL QC was found to have optimal qualities for GTR applications.


Sign in / Sign up

Export Citation Format

Share Document