Insights on the impact of photophysical processes and defect states evolution on the emission properties of surface-modified ZnO nanoplates for application in photocatalysis and hybrid LEDs

Author(s):  
Dhritiman Banerjee ◽  
Payal Banerjee ◽  
Asit Kumar Kar

The effects of surface modification on the defect state densities, optical properties, photocatalytic and quantum efficiencies of zinc oxide (ZnO) nanoplates have been studied in this work. Here, the aim...

2014 ◽  
Vol 29 (10) ◽  
pp. 1039
Author(s):  
TAN Man-Lin ◽  
WANG Yan-Tao ◽  
ZHANG Wei-Li ◽  
FU Dong-Ju ◽  
LI Dong-Shuang ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1570
Author(s):  
Shujahadeen B. Aziz ◽  
Elham M. A. Dannoun ◽  
Dana A. Tahir ◽  
Sarkawt A. Hussen ◽  
Rebar T. Abdulwahid ◽  
...  

In the current study, polymer nanocomposites (NCPs) based on poly (vinyl alcohol) (PVA) with altered refractive index and absorption edge were synthesized by means of a solution cast technique. The characterization techniques of UV–Vis spectroscopy and XRD were used to inspect the structural and optical properties of the prepared films. The XRD patterns of the doped samples have shown clear amendments in the structural properties of the PVA host polymer. Various optical parameters were studied to get more insights about the influence of CeO2 on optical properties of PVA. On the insertion of CeO2 nanoparticles (NPs) into the PVA matrix, the absorption edge was found to move to reduced photon energy sides. It was concluded that the CeO2 nanoparticles can be used to tune the refractive index (n) of the host polymer, and it reached up to 1.93 for 7 wt.% of CeO2 content. A detailed study of the bandgap (BG) was conducted using two approaches. The outcomes have confirmed the impact of the nanofiller on the BG reduction of the host polymer. The results of the optical BG study highlighted that it is crucial to address the ɛ” parameter during the BG analysis, and it is considered as a useful tool to specify the type of electronic transitions. Finally, the dispersion region of n is conferred in terms of the Wemple–DiDomenico single oscillator model.


RSC Advances ◽  
2021 ◽  
Vol 11 (42) ◽  
pp. 26218-26227
Author(s):  
R. Panda ◽  
S. A. Khan ◽  
U. P. Singh ◽  
R. Naik ◽  
N. C. Mishra

Swift heavy ion (SHI) irradiation in thin films significantly modifies the structure and related properties in a controlled manner.


2015 ◽  
Vol 1107 ◽  
pp. 326-332
Author(s):  
Abdul Rahim Yacob ◽  
Kamaluddeen Suleiman Kabo

The use of metal oxides in heterogeneous base catalysis has gained a large interest due to their application in many chemical and industrial processes and is environmental friendly. Basic metal oxides are commonly used and their structures, morphology and performance can be modified by method of preparation and thermal activation. In this study, surface modified amphoteric zinc oxide was prepared via hydration-dehydration method and characterised by TGA and FTIR. The basic strength at various temperatures is characterised by FTIR and back titration analyses. The results shows that surface modified zinc oxide has the highest basic strength of 1.453mmolg-1at 400°C making it a relatively good and suitable compound for use in heterogeneous basic catalysis. This result is also supported by FTIR spectra which show possible relationship between the Lewis O2-and increasing basic strength.


2021 ◽  
Vol 13 (11) ◽  
pp. 2124
Author(s):  
Kamila M. Harenda ◽  
Mateusz Samson ◽  
Radosław Juszczak ◽  
Krzysztof M. Markowicz ◽  
Iwona S. Stachlewska ◽  
...  

Peatlands play an important role in the global carbon cycle due to the high carbon storage in the substrate. Ecosystem production depends, for example, on the solar energy amount that reaches the vegetation, however the diffuse component of this flux can substantially increase ecosystem net productivity. This phenomenon is observed in different ecosystems, but the study of the atmosphere optical properties on peatland production is lacking. In this paper, the presented methodology allowed us to disentangle the diffuse radiation impact on the net ecosystem production (NEP) of Rzecin peatland, Poland. It allowed us to assess the impact of the atmospheric scattering process determined by the aerosol presence in the air mass. An application of atmospheric radiation transfer (ART) and ecosystem production (EP) models showed that the increase of aerosol optical thickness from 0.09 to 0.17 caused NEP to rise by 3.4–5.7%. An increase of the diffusion index (DI) by 0.1 resulted in an NEP increase of 6.1–42.3%, while a DI decrease of 0.1 determined an NEP reduction of −49.0 to −10.5%. These results show that low peatland vegetation responds to changes in light scattering. This phenomenon should be taken into account when calculating the global CO2 uptake estimation of such ecosystems.


2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Jun Yin ◽  
Lian Liu ◽  
Yashu Zang ◽  
Anni Ying ◽  
Wenjie Hui ◽  
...  

AbstractHere, an engineered tunneling layer enhanced photocurrent multiplication through the impact ionization effect was proposed and experimentally demonstrated on the graphene/silicon heterojunction photodetectors. With considering the suitable band structure of the insulation material and their special defect states, an atomic layer deposition (ALD) prepared wide-bandgap insulating (WBI) layer of AlN was introduced into the interface of graphene/silicon heterojunction. The promoted tunneling process from this designed structure demonstrated that can effectively help the impact ionization with photogain not only for the regular minority carriers from silicon, but also for the novel hot carries from graphene. As a result, significantly enhanced photocurrent as well as simultaneously decreased dark current about one order were accomplished in this graphene/insulation/silicon (GIS) heterojunction devices with the optimized AlN thickness of ~15 nm compared to the conventional graphene/silicon (GS) devices. Specifically, at the reverse bias of −10 V, a 3.96-A W−1 responsivity with the photogain of ~5.8 for the peak response under 850-nm light illumination, and a 1.03-A W−1 responsivity with ∼3.5 photogain under the 365 nm ultraviolet (UV) illumination were realized, which are even remarkably higher than those in GIS devices with either Al2O3 or the commonly employed SiO2 insulation layers. This work demonstrates a universal strategy to fabricate broadband, low-cost and high-performance photo-detecting devices towards the graphene-silicon optoelectronic integration.


Sign in / Sign up

Export Citation Format

Share Document