scholarly journals Calibration of soil humidity sensors of automatic irrigation controller

2020 ◽  
Vol 17 ◽  
pp. 00249 ◽  
Author(s):  
Akhmet H. Abdelfattah ◽  
Rais F. Sabirov ◽  
Boris L. Ivanov ◽  
Maxim A. Lushnov ◽  
Raushan A. Sabirov
Keyword(s):  
Soil Moisture ◽  
Irrigation System ◽  
Block Diagram ◽  
Flow Uniformity ◽  
Humidity Sensors ◽  
Local Soil ◽  
Different Types ◽  
Irrigation Control ◽  
Pressure Compensation

The article discusses the issues of increasing the efficiency of irrigation of crops cultivated in agriculture. Precise irrigation is an effective solution to irrigation problems. The methods and means of intellectual irrigation, based on sensors that monitor soil moisture and provide signals to the irrigation control solenoid valve, are described. A block diagram of an automatic drip irrigation system is described. For the experiment, five different types of droppers (A, B, C, D, and E) were used Rivulis Eurodrip brand, three of which are droppers with pressure compensation and two are the droppers without pressure compensation. Three parameters were used to study the characteristics of droppers: flow uniformity; volumetric water flow depending on the inlet pressure; determination of the dropper constant and the volume flow exponent. Droppers were tested at three pressures in the system: 0.05, 0.2 and 0.35 MPa. At each pressure value, the experiment was performed in triplicate. The process of calibrating humidity sensors is described. An analysis is made of the effect of soil moisture on the electrical resistance of the sensor for various types of soils. It is recommended that moisture sensors be calibrated to local soil and water conditions.

Design of Wireless Water-Saving Irrigation Controller

2013 ◽  
Vol 278-280 ◽  
pp. 1577-1580
Author(s):  
Fei Hu ◽  
Cai Rong Chen ◽  
Xun Li
Keyword(s):  
Soil Moisture ◽  
Water Saving ◽  
Utilization Efficiency ◽  
Wireless Data ◽  
Humidity Sensors ◽  
Growth Environment ◽  
Moisture Sensor ◽  
Soil Moisture Sensor ◽  
Irrigation Control ◽  
Precision Irrigation

The wireless water-saving irrigation controller based on the micro CC1100 is designed to save irrigation water and enhance the utilization efficiency of water resources. The system, which uses soil moisture sensor FDS-100 and digital temperature-humidity sensors AM2302 to collect soil moisture and air temperature and humidity of the crop growth environment, has realized remote online monitoring of soil moisture and accurate irrigation control through the wireless data transceiver utilized by CC1100. Practices show that this controller is reliable, easy to operate, and can meet the requirements of precision irrigation.

scholarly journals Kajian Aplikasi Alat Penyiraman Otomatis dengan Sistem Irigasi Tetes Berbasis Perubahan Kadar Air Tanah pada Tanaman Pakcoy (Brassica chinensis L.)

2017 ◽  
Vol 2 (3) ◽  
pp. 294-307
Author(s):  
Khairunnisak Khairunnisak ◽  
Devianti Devianti ◽  
Mustafril Mustafril
Keyword(s):  
Soil Moisture ◽  
Control System ◽  
Drip Irrigation ◽  
Irrigation System ◽  
Coefficient Of Determination ◽  
Drip Irrigation System ◽  
Brassica Chinensis ◽  
Close Relationship ◽  
Irrigation Control ◽  
Banda Aceh

Abstrak. Pemberian air irigasi secara berlebihan yang tidak sesuai dengan kebutuhan air tanaman akan mempengaruhi pertumbuhan dan produksi tanaman. Salah satu model irigasi yang memungkinkan untuk mengatur jumlah air sesuai dengan kebutuhan tanaman adalah sistem irigasi tetes. Penjadwalan irigasi secara otomatis sangat mendukung disaat cuaca yang susah diprediksi akibat adanya perubahan iklim global. Tujuan penelitian ini adalah untuk menguji kinerja mikrokontroler pada sistem irigasi tetes yang mampu bekerja secara otomatis berdasarkan perubahan kadar air tanah pada tanaman pakcoy. Penelitian  ini dilakukan di desa Lambhuk, Kecamatan Ulee Kareng, Kota Banda Aceh dengan ketinggian lahan 3,8 m di atas permukaan laut dengan ordo tanah regosol. Metode penilitian yang digunakan adalah tahap persiapan yaitu pengambilan sampel tanah untuk dianalisis di laboratorium, pembuatan jaringan sistem irigasi tetes, persemaian benih pakcoy, persiapan media tanam sebanyak 8 pot tanam, pengkalibrasian sensor kelembaban tanah, persiapan bibit pakcoy serta penanaman, dan pemasangan sistem kontrol irigasi tetes otomatis. Tahap pengamatan yaitu diukur tinggi dan jumlah helai daun pakcoy, dan ditimbang bobot segar pakcoy. Hasil penelitian menunjukkan bahwa sistem kontrol irigasi tetes otomatis dapat memenuhi kebutuhan air tanaman pakcoy berdasarkan penentuan kadar air tanah pada keadaan air tersedia, dengan koefisien determinasi (R2) sebesar 0,687. Kinerja alat penyiraman otomatis dengan menggunakan mikrokontroler dapat berfungsi dengan baik dalam memberikan air ke tanaman sesuai dengan yang diinginkan, hal ini dapat dilihat dari kemampuan alat merespon perubahan kadar air tanah menyebabkan katup terbuka dan tertutup sesuai dengan setpoint yang telah ditentukan. Terdapat hubungan yang erat antara perubahan kadar air tanah terhadap pertumbuhan pakcoy dengan koefisien determinasi (R2) sebesar 0,92 dan 0,799, dan terdapat hubungan yang erat antara pemberian air dengan sistem irigasi tetes otomatis terhadap pertumbuhan pakcoy dengan koefisien determinasi (R2) sebesar 0,778 dan 0,696. Sistem irigasi tetes otomatis dapat mengurangi pemborosan air irigasi.Study of Application of Automatic Watering Equipment with Drip Irrigation System Based on Changes in Groundwater Level on Pakcoy (Brassica chinensis L.Abstract. Excessive administration of irrigation water that is inconsistent with crop water requirements will affect plant growth and production. One of the irrigation models that allows to regulate the amount of water in accordance with the needs of the plant is the drip irrigation system. Irrigation scheduling automatically is very supportive when the weather is difficult to predict due to global climate change. The purpose of this research is to test the performance of microcontroller in drip irrigation system that can work automatically based on changes in soil moisture content in pakcoy plant. This research was conducted in Lambhuk village, Ulee Kareng sub-district, Banda Aceh city with land height 3,8 m above sea level with regosol land order. The research method used is the preparation phase of soil sampling to be analyzed in the laboratory, the making of drip irrigation system network, the seedbed of pakcoy seed, the preparation of planting media of 8 planting pots, the calibration of soil moisture sensor, the preparation of pakcoy seeds as well as the planting and installation of the irrigation control system Auto drops. Observation phase is measured height and number of leaf of pakcoy leaf, and weighs fresh weight of pakcoy. The result of research indicates that automatic drip irrigation control system can fulfill the water requirement of pakcoy plant based on the determination of ground water level in available water condition, with coefficient of determination (R2) equal to 0,687 . The use of automatic drip irrigation control system has an effect on the growth and production of pakcoy. There is a close relationship between soil moisture change to the growth of pakcoy with coefficient of determination (R2) of 0.92 and 0.799, and there is a close relationship between water delivery with automatic drip irrigation system to the growth of pakcoy with coefficient of determination (R2) of 0.778 and 0.696.

scholarly journals Design of Intelligent Water-Saving Irrigation Control System Based On Rainfall Forecast

2021 ◽  
pp. 255-271
Author(s):  
Fan Wu, Lei Zhu
Keyword(s):  
Soil Moisture ◽  
Control System ◽  
Water Resources ◽  
Fuzzy Controller ◽  
Irrigation System ◽  
Weather Forecast ◽  
Water Saving ◽  
Utilization Rate ◽  
Rainfall Forecast ◽  
Irrigation Control

Based on the current research on lack of water resources and irrigation in China, on the basis of this paper puts forward a intelligent water-saving irrigation system based on rainfall forecast, designed with sensors and the wireless communication module of sensor nodes, the smart irrigation control system, introduced the local weather forecast, the water demand for crops is analyzed, Determine the optimum soil moisture during the growing season and extend irrigation time; Considering whether it will rain in two days, by the matlab fuzzy logic toolkit, designed the fuzzy controller and fuzzy controller, the rainfall tests show that system can independently according to the crop water requirement and weather forecast information to drive the solenoid valve to complete intelligent irrigation, at the same time send farmland environmental information remote control center to set, broke through the regional restriction, It is of great significance for farmers to check farmland soil moisture information to improve the utilization rate of water resources in China.

Characterization of Different Types of Biomass Wastes Using Thermogravimetric and ICP-MS Analyses

2020 ◽  
Vol 70 (12) ◽  
pp. 4594-4600
Keyword(s):  
Thermogravimetric Analysis ◽  
Food Industry ◽  
Wood Waste ◽  
Biomass Ash ◽  
Minor Elements ◽  
Ms Analysis ◽  
Icp Ms ◽  
Different Types

The purpose of this study was to characterize some types of biomass wastes resulted from different activities such as: agriculture, forestry and food industry using thermogravimetric and ICP-MS analyses. Also, it was optimized an ICP-MS method for the determination of As, Cd and Pb from biomass ash samples. The ICP-MS analysis revealed that the highest concentration of metals (As, Cd, Pb) was recorded in the wood waste ash sample, also the thermogravimetric analysis indicated that the highest amount of ash was obtained for the same sample (26.82%). The biomass wastes mentioned in this study are alternative recyclable materials, reusable as pellets and briquettes. Keywords: ash, biomass, ICP-MS, minor elements, TG

Studies on the Behavior Some Paints in Electro-insulating Fluid Based on Vegetable Esters

2018 ◽  
Vol 69 (5) ◽  
pp. 1139-1144
Author(s):  
Iosif Lingvay ◽  
Adriana Mariana Bors ◽  
Livia Carmen Ungureanu ◽  
Valerica Stanoi ◽  
Traian Rus
Keyword(s):  
Structural Changes ◽  
Oxidation Processes ◽  
High Oleic ◽  
Painting Materials ◽  
Insulating Paper ◽  
Different Types ◽  
Mechanism And Kinetics ◽  
Kinetics Of ◽  
Natural Ester

For the purpose of using three different types of painting materials for the inner protection of the transformer vats, their behavior was studied under actual conditions of operation in the transformer (thermal stress in electro-insulating fluid based on the natural ester in contact with copper for electro-technical use and electro-insulating paper). By comparing determination of the content in furans products (HPLC technique) and gases formed (by gas-chromatography) in the electro-insulating fluid (natural ester with high oleic content) thermally aged at 130 �C to 1000 hours in closed glass vessels, it have been found that the presence the investigated painting materials lead to a change in the mechanism and kinetics of the thermo-oxidation processes. These changes are supported by oxygen dissolved in oil, what leads to decrease both to gases formation CO2, CO, H2, CH4, C2H4 and C2H6) and furans products (5-HMF, 2-FOL, 2 -FAL and 2-ACF). The painting materials investigated during the heat treatment applied did not suffer any remarkable structural changes affecting their functionality in the electro-insulating fluid based on vegetable esters.

CONSTRUCTING A DEMONSTRATION VEGETABLE GARDEN

HortScience ◽  
1992 ◽  
Vol 27 (6) ◽  
pp. 671f-671
Author(s):  
M. Marutani ◽  
R. Quitugua ◽  
C. Simpson ◽  
R. Crisostomo
Keyword(s):  
Weed Control ◽  
Cultural Practices ◽  
Irrigation System ◽  
Agricultural Science ◽  
Drip Irrigation System ◽  
Vegetable Crops ◽  
University Campus ◽  
Crop Cover ◽  
Different Types ◽  
The University

A demonstration vegetable garden was constructed for students in elementary, middle and high schools to expose them to agricultural science. On Charter Day, a University-wide celebration, students were invited to the garden on the University campus. The purpose of this project was twofold: (1) for participants to learn how to make a garden and (2) for visitors to see a variety of available crops and cultural techniques. Approximately 30 vegetable crops were grown. The garden also presented some cultural practices to improve plant development, which included weed control by solarization, mulching, a drip irrigation system, staking, shading and crop cover. Different types of compost bins were shown and various nitrogen-fixing legumes were displayed as useful hedge plants for the garden.

Soil Moisture based Automatic Irrigation System to Improve Water Productivity

2020 ◽  
Vol 7 (04) ◽  
Author(s):  
PRADEEP H K ◽  
JASMA BALASANGAMESHWARA ◽  
K RAJAN ◽  
PRABHUDEV JAGADEESH
Keyword(s):  
Soil Moisture ◽  
Soil Moisture Content ◽  
Irrigation System ◽  
Water Productivity ◽  
Vital Role ◽  
Agricultural Water Management ◽  
Water Management System ◽  
Proposed Model ◽  
Crop Growth Stage ◽  
Experimental Findings

Irrigation automation plays a vital role in agricultural water management system. An efficient automatic irrigation system is crucial to improve crop water productivity. Soil moisture based irrigation is an economical and efficient approach for automation of irrigation system. An experiment was conducted for irrigation automation based on the soil moisture content and crop growth stage. The experimental findings exhibited that, automatic irrigation system based on the proposed model triggers the water supply accurately based on the real-time soil moisture values.

Sign in / Sign up

Export Citation Format

Share Document