scholarly journals Environmental standardization of residential real estate according to “Green standards”

2018 ◽  
Vol 193 ◽  
pp. 03001 ◽  
Author(s):  
Rustem Sirazetdinov ◽  
Alina Mavliutova ◽  
Gulsina Zagidullina
Keyword(s):  
International System ◽  
Residential Building ◽  
Residential Real Estate ◽  
Environmental Certification ◽  
Object A ◽  
System A ◽  
Effective Selection ◽  
Environmental Standardization ◽  
Suitable System ◽  
Selection Of

One of the difficult tasks for grееn developers in case of object certification is effective selection of the most suitable system from existing “green” standards. The goal of the work is to identify the most appropriate environmental certification system for our region. To solve this problem and choose the most optimal system, popular “green” standards were reviewed. For the detailed analysis of systems from the inside, an attempt to pre-certify the chosen object, a multi-apartment 16-storey residential building, was made. According to our work, the most suitable international system for category of buildings under study is the DGNB standard due to its adaptability and flexibility. Existing Russian standards, although created in Russia, basically trace over BREEAM and LEED and have a number of imperfections. Recommendation is given that the Russian "green" standard should not be just the adaptation of any foreign system. A number of criteria need to be worked out in more detailed way.

scholarly journals Sensitivity Based Selection of an Optimal Cable-Driven Parallel Robot Design for Rehabilitation Purposes

Robotics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 7
Author(s):  
Ferdaws Ennaiem ◽  
Abdelbadiâ Chaker ◽  
Juan Sebastián Sandoval Arévalo ◽  
Med Amine Laribi ◽  
Sami Bennour ◽  
...  
Keyword(s):  
Pareto Front ◽  
Parallel Robot ◽  
Elastic Stiffness ◽  
Upper Limb Rehabilitation ◽  
Daily Life Activities ◽  
System A ◽  
The Monte Carlo Method ◽  
Genetic Algorithm Method ◽  
Limb Rehabilitation ◽  
Selection Of

This paper deals with the design of an optimal cable-driven parallel robot (CDPR) for upper limb rehabilitation. The robot’s prescribed workspace is identified with the help of an occupational therapist based on three selected daily life activities, which are tracked using a Qualisys motion capture system. A preliminary architecture of the robot is proposed based on the analysis of the tracked trajectories of all the activities. A multi-objective optimization process using the genetic algorithm method is then performed, where the cable tensions and the robot size are selected as the objective functions to be minimized. The cables tensions are bounded between two limits, where the lower limit ensures a positive tension in the cables at all times and the upper limit represents the maximum torque of the motor. A sensitivity analysis is then performed using the Monte Carlo method to yield the optimal design selected out of the non-dominated solutions, forming the obtained Pareto front. The robot with the highest robustness toward the disturbances is identified, and its dexterity and elastic stiffness are calculated to investigate its performance.

scholarly journals An Analytical Approach for the Selection of Technologies to be Integrated in a Plug&play Façade Unit: The RenoZEB Case Study

Proceedings ◽  
2021 ◽  
Vol 65 (1) ◽  
pp. 29
Author(s):  
Alessandro Pracucci ◽  
Sara Magnani ◽  
Laura Vandi ◽  
Oscar Casadei ◽  
Amaia Uriarte ◽  
...  
Keyword(s):  
Building Envelope ◽  
Design System ◽  
Decision Matrix ◽  
Design Guideline ◽  
Existing Building ◽  
Building Conditions ◽  
Zero Energy Building ◽  
System A ◽  
Selection Of

The nearly Zero Energy building (nZEB) renovation market is currently the key feature in the construction sector. RenoZEB aims to develop a systematic approach for retrofitting by assembling different technologies in a plug and play building envelope. This paper presents the methodology used to transform the RenoZEB concept in the design system. A multi-criteria decision matrix is used for the selection of the best façade technologies within the market while the analysis of the existing building conditions allows to develop a replicable approach for designing deep retrofitting intervention through a plug&play façade. The methodology appears to be a valuable support for the selection of technologies and allows to define a design guideline for the envelope.

CIVIL GOVERNOR M.M. OREUS IN THE SERVICE IN THE VYBORG (FINLAND) PROVINCE IN 1799–1804

2021 ◽  
Vol 10 (1) ◽  
pp. 39-46
Author(s):  
T.V. BOGDANOVA ◽  
Keyword(s):  
Russian Empire ◽  
Management Problem ◽  
Effective Mechanism ◽  
Important Condition ◽  
Emergency Situations ◽  
Effective Selection ◽  
History Of ◽  
The Government ◽  
The Russian Empire ◽  
Selection Of

The purpose of the article is to review the activities of the civil governor M.M. Oreus in the service in the Vyborg (Finland) province in 1799–1804. The guarantee of an effective mechanism of admin-istration creation as for over than 200-year period of the Russian Empire existence, as for modern conditions, it was and still is the effectiveness of the government policy on the ground. Based on this key task, the most important condition for its implementation at different stages of the development of the country was the effective selection of personnel for the post of a governor. It was the governor responsible for everything happened in his province, and the government expected him to under-stand the tasks assigned to him and take definite steps to solve them. The urgent management problem in these conditions was the strength of administrative resources capable of retaining their effective power in cases of emerging extraordinary situations, including which, will be discussed in this article. Emergency situations in the border areas occurred regularly and required the ob-servance of certain administrative traditions that influenced the success of the governor's initiatives in state tasks implementation. It will be all the more important to consider the history of the life and activities of one of the governors of the Finland (Vyborg) province, Maxim Maksimovich Oreus, who was at the head of this territory from December 14, 1799 to April 9, 1804.

Cascade control of «smart home» heating

2022 ◽  
Vol 14 (4) ◽  
pp. 82-89
Author(s):  
Sergey Polyakov ◽  
V. Akimov ◽  
A. Polukazakov
Keyword(s):  
Structural Changes ◽  
Experimental Studies ◽  
Residential Building ◽  
Heating System ◽  
Cascade Control ◽  
Virtual Object ◽  
Coolant Temperature ◽  
Home Heating ◽  
Input Signals ◽  
Selection Of

The article discusses the issues of implementing the conversion of input signals of «smart» sensors for automation of the heating system, an algorithm for calculating the parameters of measuring circuits with a nonlinear element and an operational amplifier is developed. The issues of modeling cascade control of residential building heating systems are investigated. The results of the analysis and selection of parameters of the cascade control system are presented. An algorithm implementing the operation of a virtual object is given. The structures of management of residential building objects are proposed. The method of calculating the adjustment of the controller for cascade control is given. For the heating system stand, the procedure for setting the parameters of the process of PID control of the coolant temperature is considered. The results confirming the achievability of the proposed structural changes are obtained. The results of experimental studies are presented.

scholarly journals A Chemometrics-driven Strategy for the Bioactivity Evaluation of Complex Multicomponent Systems and the Effective Selection of Bioactivity-predictive Chemical Combinations

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Yoshinori Fujimura ◽  
Chihiro Kawano ◽  
Ayaka Maeda-Murayama ◽  
Asako Nakamura ◽  
Akiko Koike-Miki ◽  
...  
Keyword(s):  
Multicomponent Systems ◽  
Effective Selection ◽  
Selection Of

scholarly journals Safety in residential buildings: Evacuation from residential buildings without fire escape stairs

2021 ◽  
Vol 69 (1) ◽  
pp. 148-178
Author(s):  
Radoje Jevtić
Keyword(s):  
Simulation Model ◽  
Residential Buildings ◽  
Residential Building ◽  
Simulation Software ◽  
Modeling Method ◽  
Real Object ◽  
Object A ◽  
The Third

Introduction/purpose: Safety in high residential buildings presents a very important and always actual task. In case of some unforeseen and dangerous occurrences, their residents must be evacuated. Fire, earthquakes, and terrorism are only some of such situations. The speed of evacuation from high residential buildings depends on many different factors. A particularly difficult and complex evacuation task concerns buildings without fire escape stairs. Methods: The modeling method was used in this paper. Based on a real object - a residential building, an appropriate simulation model was realized in appropriate simulation software. Results: The results of this paper have shown that, out of four scenarios, the fastest evacuation was for the evacuation speed of 1.75 m/s. The first two scenarios did not report any jams, unlike the third and fourth scenario; in the third scenario, the occupants' speeds were 0.75 m/s and 1.25 m/s while in the fourth scenario, the simulated occupants' speeds were from 0.75 m/s to 1.75 m/s. Conclusion:The usage of appropriate simulation software enables fast, precise, safe and cheap calculation of evacuation times and it can significantly improve evacuation procedures and evacuation strategies.

scholarly journals Effective Selection of Resources for Construction using Program Tool

2020 ◽  
Vol 9 (3) ◽  
pp. 2927-2931
Keyword(s):  
Construction Industry ◽  
Resource Selection ◽  
Construction Projects ◽  
Cost Overrun ◽  
Cost Performance ◽  
Programming Tool ◽  
Effective Selection ◽  
Selection Factor ◽  
Selection Of ◽  
Indian Scenario

In the Indian scenario construction industry facing a major problem is cost and time overrun. Effective time performance and cost performance are very important to execute the project in a successful manner by keeping them within the prescribed schedule and cost. Overall cost and duration of construction projects affected by the effective resource selection factor. This paper's objective is to rectify the improper selection of resources by a programming tool. Field survey and codebook study did collect the needed data to feed in the programming tool. The prepared tool gets distributed and making to access by every stakeholder of construction projects. This may result in the selection of construction resources as effectively. The term cost overrun in the resource part will be reduced.

Sign in / Sign up

Export Citation Format

Share Document