scholarly journals Leaching, carbonation and chloride ingress in reinforced alkali-activated fly ash mortars

2018 ◽  
Vol 199 ◽  
pp. 02025 ◽  
Author(s):  
Gregor J. G. Gluth ◽  
Petr Hlaváček ◽  
Steffi Reinemann ◽  
Gino Ebell ◽  
Jürgen Mietz
Keyword(s):  
Fly Ash ◽  
Visual Inspection ◽  
Electrochemical Behaviour ◽  
Transport Coefficients ◽  
Chloride Penetration ◽  
Chloride Ingress ◽  
Reaction Products ◽  
Steel Bars ◽  
Alkali Activated Binders ◽  
Alkali Activated

Alkali-activated fly ash mortars were studied with regard to durability-relevant transport coefficients and the electrochemical behaviour of embedded carbon steel bars on exposure of the mortars to leaching, carbonation and chloride penetration environments. The transport coefficients differed considerably between different formulations, being lowest for a mortar with BFS addition, but still acceptable for one of the purely fly ash-based mortars. Leaching over a period of ~300 days in de-ionized water did not lead to observable corrosion of the embedded steel, as shown by the electrochemical data and visual inspection of the steel. Exposure to 100 % CO2 atmosphere caused steel depassivation within approx. two weeks; in addition, indications of a deterioration of the mortar were observed. The results are discussed in the context of the different reaction products expected in highand low-Ca alkali-activated binders, and the alterations caused by leaching and carbonation.

scholarly journals Effect of CaSO4 Incorporation on Pore Structure and Drying Shrinkage of Alkali-Activated Binders

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1673 ◽  
Author(s):  
Hyeongmin Son ◽  
Sol Moi Park ◽  
Joon Ho Seo ◽  
Haeng Ki Lee
Keyword(s):  
Fly Ash ◽  
Pore Structure ◽  
Drying Shrinkage ◽  
Phase Changes ◽  
X Ray Diffraction ◽  
Activated Slag ◽  
Capillary Tension ◽  
Alkali Activated Binders ◽  
Internal Pore Structure ◽  
Alkali Activated

This present study investigates the effects of CaSO4 incorporation on the pore structure and drying shrinkage of alkali-activated slag and fly ash. The slag and fly ash were activated at a 5:5 ratio by weighing with a sodium silicate. Thereafter, 0%, 5%, 10%, and 15% of CaSO4 were incorporated to investigate the changes in phase formation and internal pore structure. X-Ray Diffraction (XRD), thermogravimetry (TG)/derivative thermogravimetry (DTG), mercury intrusion porosimetry (MIP), nuclear magnetic resonance (NMR), and drying shrinkage tests were carried out to find the correlation between the pore structure and drying shrinkage of the specimens. The results showed that CaSO4 incorporation increased the formation of thenardite, and these phase changes affected the pore structure of the activated fly ash and slag. The increase in the CaSO4 content increased the pore distribution in the mesopore. As a result, the capillary tension and drying shrinkage decreased.

Alkali-activated binders based on incinerator bottom ash combined with limestone-calcined clay or fly ash

2022 ◽  
Vol 320 ◽  
pp. 126306
Author(s):  
Jun Liu ◽  
Zhen Liang ◽  
Hesong Jin ◽  
Gediminas Kastiukas ◽  
Luping Tang ◽  
...  
Keyword(s):  
Fly Ash ◽  
Bottom Ash ◽  
Calcined Clay ◽  
Alkali Activated Binders ◽  
Alkali Activated

Durability of Alkali-Activated Fly Ash/Slag Concrete

2017 ◽  
Vol 904 ◽  
pp. 157-161 ◽  
Author(s):  
Mao Chieh Chi ◽  
Hsian Chen ◽  
Tsai Lung Weng ◽  
Ran Huang ◽  
Yih Chang Wang
Keyword(s):  
Fly Ash ◽  
Total Charge ◽  
Test Results ◽  
Mass Ratio ◽  
Modulus Ratio ◽  
Granulated Blast Furnace Slag ◽  
Alkali Activated Binders ◽  
Furnace Slag ◽  
Alkali Activated ◽  
Better Than

This study investigated the durability of alkali-activated binders based on blends of fly ash (FA) and ground granulated blast furnace slag (GGBFS). Five fly ash-to-slag ratios of 100/0, 75/25, 50/50, 25/75, and 0/100 by mass were selected to produce alkali-activated fly ash/slag (AAFS) concrete. Sodium oxide (Na2O) concentrations of 6% and 8% of binder weight and activator modulus ratios (mass ratio of SiO2 to Na2O) of 0.8, 1.0, and 1.23 were used as alkaline activators. Test results show that the total charge passed of AAFS concrete is between 2500 and 4000 coulombs, higher than the comparable OPC concrete. However, AAFS concrete exposed to sulfate attack performed better than OPC concrete. Based on the results, 100% slag-based AAFS concrete with Na2O concentration of 8% and activator modulus ratio of 1.23 has the superior performances.

scholarly journals Role of Curing Conditions and Precursor on the Microstructure and Phase Chemistry of Alkali-Activated Fly Ash and Slag Pastes

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1918
Author(s):  
Marija Nedeljković ◽  
Bahman Ghiassi ◽  
Guang Ye
Keyword(s):  
Fly Ash ◽  
Analytical Techniques ◽  
Limited Information ◽  
Reaction Products ◽  
Curing Conditions ◽  
X Ray ◽  
Phase Recognition ◽  
Phase Chemistry ◽  
Alkali Activated

Understanding the role of curing conditions on the microstructure and phase chemistry of alkali-activated materials (AAMs) is essential for the evaluation of the long-term performance as well as the optimization of the processing methods for achieving more durable AAMs-based concretes. However, this information cannot be obtained with the common material characterization techniques as they often deliver limited information on the chemical domains and proportions of reaction products. This paper presents the use of PhAse Recognition and Characterization (PARC) software to overcome this obstacle for the first time. A single precursor (ground granulated blast-furnace slag (GBFS)) and a binary precursor (50% GBFS–50% fly ash) alkali-activated paste are investigated. The pastes are prepared and then cured in sealed and unsealed conditions for up to one year. The development of the microstructure and phase chemistry are investigated with PARC, and the obtained results are compared with independent bulk analytical techniques X-ray Powder Fluorescence and X-ray Powder Diffraction. PARC allowed the determination of the type of reaction products and GBFS and FA’s spatial distribution and degree of reaction at different curing ages and conditions. The results showed that the pastes react at different rates with the dominant reaction products of Mg-rich gel around GBFS particles, i.e., Ca-Mg-Na-Al-Si, and with Ca-Na-Al-Si gel, in the bulk paste. The microstructure evolution was significantly affected in the unsealed curing conditions due to the Na+ loss. The effect of the curing conditions was more pronounced in the binary system.

Effect of Mechanical Activation on Properties of Alkali Activated Binders

2014 ◽  
Vol 1000 ◽  
pp. 67-70 ◽  
Author(s):  
Martin Sisol ◽  
Juraj Mosej ◽  
Miroslava Drabová ◽  
Ivan Brezani
Keyword(s):  
Fly Ash ◽  
Flexural Strength ◽  
Mechanical Activation ◽  
Sodium Hydroxide ◽  
Water Glass ◽  
Fly Ashes ◽  
Alkali Activated Binders ◽  
Alkali Activated

Effect of mechanical activation of fly ashes on strength of alkali activated binders is investigated. Four different kinds of fly ashes are mechanically activated. The aim of mechanical activation is to increase the reactivity of fly ashes. Mechanically activated fly ash is used as an admixture to the untreated original fly ash in proportion of 0, 50, 75 and 100 %. Fly ashes are alkali activated with solutions containing sodium hydroxide and sodium water glass. Compressive and flexural strength is tested on hardened alkali activated binders.

scholarly journals Influence of Water Content on Mechanical Strength and Microstructure of Alkali-Activated Fly Ash/GGBFS Mortars Cured at Cold and Polar Regions

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 138 ◽  
Author(s):  
Xiaobin Wei ◽  
Feng Ming ◽  
Dongqing Li ◽  
Lei Chen ◽  
Yuhang Liu
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Water Content ◽  
Negative Temperature ◽  
Polar Regions ◽  
Uniaxial Compression Strength ◽  
Influence Of Water ◽  
Strength And Durability ◽  
Alkali Activated Binders ◽  
Alkali Activated

Negative temperature curing is a very harmful factor for geopolymer mortar or concrete, which will decrease the strength and durability. The water in the geopolymer mixture may be frozen into ice, and the water content is a crucial factor. The purpose of this paper is to explore the influence of water content on the properties of alkali-activated binders mortar cured at −5 °C. Fly ash (FA) and ground granulated blast furnace slag (GGBFS) were used as binders. Three groups of experiments with different water content were carried out. The prepared samples were investigated through uniaxial compression strength test, Scanning electron microscopy (SEM), and X-ray diffraction (XRD) for the determination of their compressive strength, microstructural features, phase, and composition. The results indicated that, the compressive strength of samples basically maintained 25.78 MPa–27.10 MPa at an age of 28 days; for 90 days, the values reached 33.4 MPa–34.04 MPa. The results showed that lower water content is beneficial to improving the early strength of mortar at −5 °C curing condition, while it has little impact on long-term strength. These results may provide references for the design and construction of geopolymer concrete in cold regions.

Preparation and Properties of Pressed Metakaolin and Fly Ash Based Alkali-Activated Binders

2014 ◽  
Vol 897 ◽  
pp. 65-68 ◽  
Author(s):  
Jana Boháčová ◽  
Stanislav Staněk ◽  
Pavel Mec
Keyword(s):  
Tensile Strength ◽  
Fly Ash ◽  
High Temperatures ◽  
Frost Resistance ◽  
Raw Materials ◽  
Fly Ashes ◽  
Secondary Raw Materials ◽  
Alkali Activated Binders ◽  
Alkali Activated

Metakaolin, fly ashes and other secondary raw materials serves as suitable input in preparation of alkali-activated binders. This work deals with preparation of alkali-activated materials based on metakaoline and fly ash. Mixtures were prepared with a minimum of mixture water, ready for pressing. Prepared specimens were tested for tensile strength and pressure strength, resistance to high temperatures, frost resistance and resistance to water and salt.

Sign in / Sign up

Export Citation Format

Share Document