scholarly journals Concurrent Data Message Transmissions for Interference of Illegal Overhearing in Wireless Sensor Networks

2018 ◽  
Vol 210 ◽  
pp. 03011
Author(s):  
Masahiro Okuri ◽  
Hiroaki Higaki
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Sensor Node ◽  
Wireless Transmission ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Transmission Range ◽  
Wireless Sensor Node ◽  
Wireless Sensor Nodes ◽  
Wireless Nodes

In wireless sensor networks, data messages containing sensor data achieved by a sensor module in a wireless sensor node is transmitted to a stationary wireless sink node along a wireless multihop transmission route in which wireless sensor nodes themselves forward the data messages. Each intermediate wireless sensor node broadcast data messages in its wireless transmission range to forward them to its next-hop intermediate wireless sensor node. Hence, eavesdropper wireless nodes within the wireless transmission range easily overhear the data messages. In order to interfere with the eavesdropper wireless nodes illegally overhearing the data messages in transmission, wireless sensor nodes whose wireless transmission ranges overlap and their next-hop intermediate wireless sensor nodes are out of the wireless transmission ranges each other forward data messages in transmission concurrently and cause collisions between these two data messages at any possible eavesdropper wireless nodes intentionally. To enhance regions where concurrently forwarded data messages intentionally collide to prevent their overhearing and to realize concurrent forwarding of data messages, this paper designes an algorithm for TDMA transmission slot assignments for more opportunities to interfere the eavesdropper wireless nodes.

scholarly journals Energy Efficiency Analysis of LoRa and ZigBee Protocols in Wireless Sensor Networks

2021 ◽  
Vol 11 (4) ◽  
pp. 2836-2849
Author(s):  
K. Raghava Rao ◽  
D. Sateesh Kumar ◽  
Mohiddin Shaw ◽  
V. Sitamahalakshmi
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Power Consumption ◽  
Low Power ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Wireless Sensor Nodes ◽  
Iot Applications

Now a days IoT technologies are emerging technology with wide range of applications. Wireless sensor networks (WSNs) are plays vital role in IoT technologies. Construction of wireless sensor node with low-power radio link and high-speed processors is an interesting contribution for wireless sensor networks and IoT applications. Most of WSNs are furnished with battery source that has limited lifetime. The maximum operations of these networks require more power utility. Nevertheless, improving network efficiency and lifetime is a curtail issue in WSNs. Designing a low powered wireless sensor networks is a major challenges in recent years, it is essential to model its efficiency and power consumption for different applications. This paper describes power consumption model based on LoRa and Zigbee protocols, allows wireless sensor nodes to monitor and measure power consumption in a cyclic sleeping scenario. Experiential results reveals that the designed LoRa wireless sensor nodes have the potential for real-world IoT application with due consideration of communicating distance, data packets, transmitting speed, and consumes low power as compared with Zigbee sensor nodes. The measured sleep intervals achieved lower power consumption in LoRa as compared with Zigbee. The uniqueness of this research work lies in the review of wireless sensor node optimization and power consumption of these two wireless sensor networks for IoT applications.

scholarly journals Raspberry Pi Based Intelligent Wireless Sensor Node for Localized Torrential Rain Monitoring

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Zhaozhuo Xu ◽  
Fangling Pu ◽  
Xin Fang ◽  
Jing Fu
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Sensor Node ◽  
Heavy Rain ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Raspberry Pi ◽  
Support Vector ◽  
Wireless Sensor Node ◽  
Torrential Rain

Wireless sensor networks are proved to be effective in long-time localized torrential rain monitoring. However, the existing widely used architecture of wireless sensor networks for rain monitoring relies on network transportation and back-end calculation, which causes delay in response to heavy rain in localized areas. Our work improves the architecture by applying logistic regression and support vector machine classification to an intelligent wireless sensor node which is created by Raspberry Pi. The sensor nodes in front-end not only obtain data from sensors, but also can analyze the probabilities of upcoming heavy rain independently and give early warnings to local clients in time. When the sensor nodes send the probability to back-end server, the burdens of network transport are released. We demonstrate by simulation results that our sensor system architecture has potentiality to increase the local response to heavy rain. The monitoring capacity is also raised.

scholarly journals A Novel Protocol to Provide Authentication and Privacy in WSN

2019 ◽  
Vol 8 (9S4) ◽  
pp. 264-266
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Node ◽  
Authentication Protocol ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Wireless Sensor Nodes ◽  
Privacy Requirements ◽  
Radio Signals ◽  
Safety Features

A wireless sensor network holds a large amount of nodes. These nodes will contact themselves by utilizing some of the radio signals. wireless sensor networks (WSNs) has develop some applications during a huge selection areas, in the time of which external side users ought to straightly attach with sensors to get a perceived information. But, WSNs (wireless sensor node) are open to numerous attacks for wireless links, like eavesdropping and meddling. Two-factor authentication combining password and ID utterly like this demand due to password and ID usefulness. Then, a bucket of two-factor authentication protocol was advised in present research works. Because of the difficult assignment of adjustable potency and privacy requirements, still it’s difficult to introduce a privacyaware two-factor protocol that's potential of giving different safety features whereas take care of proper potency. in this paper the proposed work tend to suggests a privacy aware two-factor authentication protocol depend on ECC for wireless sensor nodes(WSNs). In this another convention performs distinctive wellbeing highlights need fully for the application situations, all things considered, though deal with appropriate power. So in this we will in general demonstrate that the presented convention accomplishes intelligent in the Burrows–Abadi– Needham judgment to boot, through manner of unofficial security statistics, the work show the introduced protocol will face up to a range of attacks and supply fascinating safety features.

scholarly journals A Data-Based Fault-Detection Model for Wireless Sensor Networks

2019 ◽  
Vol 11 (21) ◽  
pp. 6171 ◽  
Author(s):  
Jangsik Bae ◽  
Meonghun Lee ◽  
Changsun Shin
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Fault Detection ◽  
Data Transmission ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Sensors And Actuators ◽  
Detection Model ◽  
Management Platform

With the expansion of smart agriculture, wireless sensor networks are being increasingly applied. These networks collect environmental information, such as temperature, humidity, and CO2 rates. However, if a faulty sensor node operates continuously in the network, unnecessary data transmission adversely impacts the network. Accordingly, a data-based fault-detection algorithm was implemented in this study to analyze data of sensor nodes and determine faults, to prevent the corresponding nodes from transmitting data; thus, minimizing damage to the network. A cloud-based “farm as a service” optimized for smart farms was implemented as an example, and resource management of sensors and actuators was provided using the oneM2M common platform. The effectiveness of the proposed fault-detection model was verified on an integrated management platform based on the Internet of Things by collecting and analyzing data. The results confirm that when a faulty sensor node is not separated from the network, unnecessary data transmission of other sensor nodes occurs due to continuous abnormal data transmission; thus, increasing energy consumption and reducing the network lifetime.

scholarly journals Calculating the Number of Cluster Heads Based on the Rate-Distortion Function in Wireless Sensor Networks

2014 ◽  
Vol 2014 ◽  
pp. 1-7
Author(s):  
Mingxin Yang ◽  
Jingsha He ◽  
Yuqiang Zhang
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Data Fusion ◽  
Rate Distortion ◽  
Distortion Function ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Nodes ◽  
Cluster Heads

Due to limited resources in wireless sensor nodes, energy efficiency is considered as one of the primary constraints in the design of the topology of wireless sensor networks (WSNs). Since data that are collected by wireless sensor nodes exhibit the characteristics of temporal association, data fusion has also become a very important means of reducing network traffic as well as eliminating data redundancy as far as data transmission is concerned. Another reason for data fusion is that, in many applications, only some of the data that are collected can meet the requirements of the sink node. In this paper, we propose a method to calculate the number of cluster heads or data aggregators during data fusion based on the rate-distortion function. In our discussion, we will first establish an energy consumption model and then describe a method for calculating the number of cluster heads from the point of view of reducing energy consumption. We will also show through theoretical analysis and experimentation that the network topology design based on the rate-distortion function is indeed more energy-efficient.

scholarly journals Wireless Sensor Networks for Indoor Environment Monitoring Using LabVIEW

2011 ◽  
pp. 87-90
Author(s):  
Mrutyunjay Rout ◽  
Dr. Harish Kumar Verma ◽  
Subhashree Das
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Indoor Environment ◽  
Environmental Parameters ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Environment Monitoring ◽  
Wireless Sensor Nodes ◽  
Local Decision ◽  
Mems Technology

Wireless sensor networks (WSNs) have gained worldwide attention in recent years, particularly with the rapid progress in Micro-Electro-Mechanical Systems (MEMS) technology which has facilitated the development of smart sensors. These sensors are small, with limited processing and computing resources, and they are inexpensive compared to traditional sensors. These sensor nodes can sense, measure, and gather information from the environment and, based on some local decision process, they can transmit the sensed data to the user. WSNs are large networks made of a numerous number of sensor nodes with sensing, computation, and wireless communication capabilities. In present work we provide a brief summary of the state-ofthe- art in wireless sensor networks, investigate the feasibility of indoor environment monitoring using crossbow wireless sensor nodes. Here we used nesC programming language and TinyOS operating system for programming Crossbow sensor nodes and LabVIEW GUI is used for displaying different indoor environmental parameters such as temperature, humidity and light acquired from different Wireless sensor nodes. These sensor readings can help building administrators to monitor the physical conditions of the environment in a building for creating optimized energy usage.

scholarly journals Performance Analysis of Q-Leach Algorithm in WSN

2020 ◽  
Vol 5 (10) ◽  
pp. 1-4
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Data Transmission ◽  
Short Range ◽  
Sensor Node ◽  
Life Time ◽  
Time Span ◽  
Sensor Nodes ◽  
Wireless Sensor

Sensor nodes are exceedingly energy compelled instrument, since it is battery operated instruments. In wsn network, every node is liable to the data transmission through the wireless mode [1]. Wireless sensor networks (WSN) is made of a huge no. of small nodes with confined functionality. The essential theme of the wireless sensor network is energy helpless and the WSN is collection of sensor. Every sensor terminal is liable to sensing, store and information clan and send it forwards into sink. The communication within the node is done via wireless network [3].Energy efficiency is the main concentration of a desining the better routing protocol. LEACH is a protocol. This is appropriate for short range network, since imagine that whole sensor node is capable of communication with inter alia and efficient to access sink node, which is not always correct for a big network. Hence, coverage is a problem which we attempt to resolve [6]. The main focus within wireless sensor networks is to increase the network life-time span as much as possible, so that resources can be utilizes efficiently and optimally. Various approaches which are based on the clustering are very much optimal in functionality. Life-time of the network is always connected with sensor node’s energy implemented at distant regions for stable and defect bearable observation [10].

Design of a Wireless Sensor Network Node Based on STM32

2013 ◽  
Vol 347-350 ◽  
pp. 1920-1923
Author(s):  
Yu Jia Sun ◽  
Xiao Ming Wang ◽  
Fang Xiu Jia ◽  
Ji Yan Yu
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Network Node ◽  
Wireless Sensor Node ◽  
Wireless Sensor Nodes ◽  
Communication Module ◽  
Design Factors

The characteristics and the design factors of wireless sensor network node are talked in this article. According to the design factors of wireless sensor network, this article will mainly point out the design of wireless sensor nodes based a Cortex-M3 Microcontroller STM32F103RE chip. And the wireless communication module is designed with a CC2430 chip. Our wireless sensor node has good performance in our test.

Nature-Inspired Algorithms in Wireless Sensor Networks

2019 ◽  
pp. 246-275
Author(s):  
Ajay Kaushik ◽  
S. Indu ◽  
Daya Gupta
Keyword(s):  
Wireless Sensor Networks ◽  
Big Data ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Efficient ◽  
Sensor Node ◽  
Optimization Problem ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Nature Inspired Algorithms

Wireless sensor networks (WSNs) are becoming increasingly popular due to their applications in a wide variety of areas. Sensor nodes in a WSN are battery operated which outlines the need of some novel protocols that allows the limited sensor node battery to be used in an efficient way. The authors propose the use of nature-inspired algorithms to achieve energy efficient and long-lasting WSN. Multiple nature-inspired techniques like BBO, EBBO, and PSO are proposed in this chapter to minimize the energy consumption in a WSN. A large amount of data is generated from WSNs in the form of sensed information which encourage the use of big data tools in WSN domain. WSN and big data are closely connected since the large amount of data emerging from sensors can only be handled using big data tools. The authors describe how the big data can be framed as an optimization problem and the optimization problem can be effectively solved using nature-inspired algorithms.

Cost Minimization of Sensor Placement and Routing in Wireless Sensor Networks

2020 ◽  
pp. 1286-1301
Author(s):  
Tata Jagannadha Swamy ◽  
Garimella Rama Murthy
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Cost Minimization ◽  
Real Life ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Nodes ◽  
Technological Advances ◽  
Strongly Connected ◽  
Placement And Routing

Wireless Sensor Nodes (WSNs) are small in size and have limited energy resources. Recent technological advances have facilitated widespread use of wireless sensor networks in many real world applications. In real life situations WSN has to cover an area or monitor a number of nodes on a plane. Sensor node's coverage range is proportional to their cost, as high cost sensor nodes have higher coverage ranges. The main goal of this paper is to minimize the node placement cost with the help of uniform and non-uniform 2D grid planes. Authors propose a new algorithm for data transformation between strongly connected sensor nodes, based on graph theory.

Sign in / Sign up

Export Citation Format

Share Document