scholarly journals Efficacy Of Two NI-TI Retreatment Systems and Hand Files in Removing Gutta-Percha and Sealer From Root Canals Filled With Three Different Types of Sealers

2015 ◽  
Vol 03 (02) ◽  
pp. 071-079
Author(s):  
Rajender Singh ◽  
Ashu Gupta ◽  
Vishal Sharma
Keyword(s):  
Operating Time ◽  
Filling Material ◽  
Test Results ◽  
Root Canals ◽  
Gutta Percha ◽  
Honestly Significant Difference ◽  
Working Length ◽  
Significant Difference ◽  
Hand Instrumentation ◽  
Difference Test

Abstract Objectives: This study was undertaken to evaluate the efficiency of two rotary nickel titanium instruments and hand instrumentation in removing gutta-percha and sealer from root canals. Study design: – 63 extracted human single rooted premolars were instrumented with K-files and filled using lateral compaction of gutta-percha (GP) and three different sealers. The teeth were randomly divided into three experimental groups of 21 specimens each. Removal of gutta-percha was performed with R-Endo retreatment files, Mtwo retreatment files and Hedstrom files. Time to reach working length and to eliminate filling material was also recorded. The specimens were sectioned for evaluation of the area of the remaining gutta-percha/sealer under stereomicroscope at 6X magnification. Photographs were taken for further analysis using computer image analysis program. The results were statistically analyzed using Analysis of variance (ANOVA) and Tukey’s honestly significant difference test. Results: The R-Endo retreatment system resulted in a smaller percentage of canal area covered by residual GP/sealer than in other groups, a significant difference was found between R-Endo and Mtwo group and between Hedstrom groups (P < 0.001). The Mean operating time was minimum with R-Endo group while it was found to be maximum with hand files. Conclusion: It was concluded that all test techniques left gutta-percha/sealer remnants within the root canal. The R-Endo retreatment files and Mtwo retreatment files system proved to be an efficient method for removing gutta-percha and sealer from single rooted premolars.

scholarly journals Effectiveness of Three Rotary Niti Instruments and Hand Instrumentation in Removing Gutta Percha from Root Canals: an in vitro Study

2015 ◽  
Vol 03 (03) ◽  
pp. 152-158
Author(s):  
Varun Jindal ◽  
Ajay Chhabra ◽  
◽  
Keyword(s):  
In Vitro Study ◽  
Radiographic Analysis ◽  
Filling Material ◽  
Universal System ◽  
Root Canals ◽  
Gutta Percha ◽  
Significant Difference ◽  
Niti Instruments ◽  
Hand Instrumentation

Abstract Objectives: The study aimed to assess variation in the remaining filling material by radiographic analysis and the time taken for retreatment system, with H-files; the ProTaper Universal Retreatment System; Mtwo retreatment system and the SybronEndo K3. Methods: 120 human mandibular premolars with single straight root canals were prepared with rotary twisted files (up to size 40/0.04) using the crown down technique and filled by cold lateral condensation and the radiographs were taken. After one week, teeth were divided into four groups (n = 30). Gutta-percha was removed using H-files, the ProTaper Universal Retreatment System, Mtwo system and the K3 System. After retreatment radiographs were taken for each sample and the remaining material was calculated for each canal third. Results: Rotary NiTi instruments were significantly faster than the hand instrumentation technique in performing the retreatment. In radiographic analysis there was significant difference in between the groups for coronal third in ProTaper group and for apical third in H-file group. Conclusions: In the radiographic analysis the ProTaper Universal System left less filling material in the coronal third and the H-files left less filling material in apical third as compared to other groups. Rotary instruments worked faster than H files.

scholarly journals Comparison of Two Techniques for Selection of Master Gutta-Percha Cone Using Micro-Computed Tomography

2013 ◽  
Vol 24 (4) ◽  
pp. 367-370 ◽  
Author(s):  
Joao Manoel Silva-Filho ◽  
Aline Evangelista Souza-Gabriel ◽  
Graziela Bianchi Leoni ◽  
Samuel Henrique Camara De-Bem ◽  
Edson Alfredo ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Conventional Technique ◽  
Filling Material ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Root Canals ◽  
Gutta Percha ◽  
Working Length ◽  
Significant Difference ◽  
Material Volume

This study used micro-computed tomography (micro-CT) to evaluate the fit of the master gutta-percha cone at time of cone fit, gutta-percha volume in the filling material, and the filling material volume in relation to the canal at the apical limit of the working length. Root canals of 20 maxillary central incisors were prepared with rotary instruments and distributed into two groups (n=10). The gutta-percha cone tip was either plasticized (apical thermal impression technique - ATI) or not (conventional technique - CT), and its apical fit was checked. The apical 1 mm of working length was examined with a micro-CT, canals were filled with gutta-percha and sealer, and new micro-CT scans were obtained. In CT, gutta-percha filled 35.83 ± 15.05% of the canal at cone selection and 38.72 ± 11.64% after filling. In ATI, these values were 23.14 ± 7.74% and 26.98 ± 20.40%, respectively. Gutta-percha volume in the filling material, and filling material volume in relation to the canal were, respectively, 61.28 ± 11.64% and 87.76 ± 9.98% for CT, and 73.00 ± 20.41% and 89.96 ± 9.08% for ATI. No significant difference was found between cone selection and after canal filling, for either CT (p=0.593) or ATI (p=0.4975). The techniques did not differ significantly with respect to gutta-percha volume in the filling material (p=0.132) and filling material volume in relation to the canal (p=0.612). An ideal fit of the master gutta-percha cone at working length was not achieved regardless of the cone selection technique, and the material-filled area was similar for both techniques.

Microbial Leakage of Cavit, IRM, and Temp Bond in Post-prepared Root Canals Using Two Methods of Gutta-percha Removal: An In Vitro Study

2005 ◽  
Vol 6 (3) ◽  
pp. 53-61 ◽  
Author(s):  
Hanan Balto ◽  
Saad Al-Nazhan ◽  
Khulood Al-Mansour ◽  
Moneera Al-Otaibi ◽  
Yunus Siddiqu
Keyword(s):  
Root Canal ◽  
Bacterial Suspension ◽  
Control Group ◽  
Endodontically Treated Teeth ◽  
Root Canals ◽  
Gutta Percha ◽  
Working Length ◽  
Significant Difference ◽  
Post Space

Abstract The aim of this study was to evaluate the integrity of the coronal seal of Temp-Bond and compare it to Cavit and IRM after post space preparation using S. faecalis as a microbial tracer. In addition, the affect of two methods of gutta percha removal on the apical seal of root canal fillings was also evaluated. Forty extracted human single rooted teeth were prepared chemomechanically and obturated with gutta percha and AH26 sealer cement using the lateral cold condensation technique to a standardized working length of 15 mm. About 10 mm of the coronal gutta-percha was removed with either Peeso-reamer or a hot plugger. The roots were divided into three experimental groups of 10 roots and a control group. Each experimental group was subdivided equally into two groups of 15 each according to the method of post space preparation. Cavit, IRM, and Temp-Bond were used to seal the access opening. Each root was fixed in a cuvette containing Tryptic Soya Broth which, covered 2 mm of the root apex. Bacterial suspension was introduced through pipette. Fresh bacterial suspension was added every week, and the system was monitored daily for the growth of microorganisms for a period of one month. The results showed there was no significant difference in terms of coronal leakage between the three coronal materials used (P=0.478), but the methods of gutta-percha removal did have an impact on the apical leakage (P=0.047). The mean value showed the Peeso-reamer provided less leakage compared to using a hot plugger during the 30-day experimental time period. It was concluded the temporary type of coronal seal of endodontically treated teeth will not prevent coronal leakage if left for a long period of time. In addition, permanent cementation of the post with the coronal restoration should be carried out as soon as possible to prevent recontamination of the root canal. Citation Balto H, Al-Nazhan S, Al-Mansour K, Al-Otaibi M, Siddiqu Y. Microbial Leakage of Cavit, IRM, and Temp Bond in Post-prepared Root Canals Using Two Methods of Gutta-percha Removal: An In Vitro Study. J Contemp Dent Pract 2005 August;(6)3:053-061.

scholarly journals In vitro evaluation of apical microleakage using different root-end filling materials

2006 ◽  
Vol 14 (1) ◽  
pp. 49-52 ◽  
Author(s):  
Márcia Carneiro Valera ◽  
Carlos Henrique Ribeiro Camargo ◽  
Alessandra Sverberi Carvalho ◽  
Eduardo Ramalho Pereira Gama
Keyword(s):  
Zinc Oxide ◽  
Root Apex ◽  
Tissue Fluid ◽  
Filling Material ◽  
Human Teeth ◽  
Root Canals ◽  
Filling Materials ◽  
Gutta Percha ◽  
Significant Difference

The objective of this study was to evaluate the apical leakage of retrograde cavities filled with Portland Cement (Concrebrás S/A-MG-Brazil), ProRoot MTA TM (Dentsply International, Johnson City, TN, USA) and Sealapex (Kerr Corporation, Orange, California, USA) with addition of zinc oxide (Odahcam Herpo Produtos Dentários Ltda, Rio de Janeiro, RJ, Brazil). Forty-two extracted single-rooted human teeth were decoronated and used for this study. The root canals were instrumented at 1.0mm short of the apical foramen using the step-back technique to an apical ISO size 60. The roots were obturated with gutta-percha points and sealer Sealapex (Kerr Corporation-USA) and then 3mm of each root apex was sectioned at a 90° angle. Ultrasonic retrograde preparation was performed with a diamond tip to 3mm depth and the roots were randomly divided into 3 groups according to the filling material: G1-Portland, G2-ProRoot MTA, G3- Sealapex zinc oxide-added cement. The root surfaces were covered with nail varnish up to 2mm from the apical foramen, immersed in simulated tissue fluid for 30 days, and then immersed in 0.2% Rhodamine B solution for 24 hours for evaluation of marginal leakage. The results showed mean leakage of 0.75, 0.35 and 0.35 for groups 1, 2 and 3, respectively; however, Kruskal-Wallis test revealed that there was no statistically significant difference among the results (p>0.05).

scholarly journals Evaluation of Apical Leakage of Root Canals Obturated with Nd: YAG Laser Softened Gutta-Percha, System-B, and Lateral Condensation Techniques

2002 ◽  
Vol 3 (1) ◽  
pp. 27-42 ◽  
Author(s):  
Murat Maden ◽  
Güliz Görgül ◽  
A. Cemal Tinaz
Keyword(s):  
Heat Source ◽  
Nd:Yag Laser ◽  
Continuous Wave ◽  
Root Canals ◽  
Single Root ◽  
Gutta Percha ◽  
Working Length ◽  
Significant Difference ◽  
Length Determination ◽  
Apical Leakage

Abstract In endodontics, a laser can be used as a heat source and gutta-percha can be softened by a laser and used in the root canals. The System-B endodontic heat source unit was designed for the obturation of the root canal system with a single continuous wave of thermoplasticized gutta-percha. The aim of this study was to compare the apical leakage of lateral condensation; Nd:YAG laser-softened gutta-percha and System-B techniques. Fifty-five extracted, single root human maxillary anterior and premolar teeth were used in this study. After working length determination, the “step-back technique” was used to prepare the root canals. The teeth were randomly divided into three experimental groups of 15 each and two control groups of 5 specimens each. The first group was obturated by lateral condensation, the second group by gutta-percha softened with an Nd:YAG laser, and the third group was obturated using the system-B technique. Apical leakage of the roots was evaluated by dye penetration using a stereomicroscope after sectioning the roots. The results of the first and third groups were similar, and the results of the second group showed differences when compared with the other groups. However, variance analysis revealed there was no statistically significant difference among the results. Citation Maden M, Görgül G, Tinaz AC. Evaluation of Apical Leakage of Root Canals Obturated with Nd:Yag laser-softened Gutta-percha, System-B, and Lateral Condensation Techniques. J Contemp Dent Pract 2002 Feb;(3)1: 016-026.

scholarly journals Assessment of Apical Extrusion of Debris during Endodontic Retreatment with 3 Rotary Nickel-Titanium Retreatment Systems and Hand Files

2016 ◽  
Vol 20 (1) ◽  
pp. 22-28
Author(s):  
S. Gkampesi ◽  
Z. Mylona ◽  
T. Zarra ◽  
T. Lambrianidis
Keyword(s):  
Root Canal ◽  
Complete Removal ◽  
Filling Material ◽  
Root Canal Filling ◽  
Gutta Percha ◽  
Apical Extrusion ◽  
Significant Difference ◽  
Level Of Significance ◽  
Hand Instrumentation ◽  
Endodontic Retreatment

SummaryAim: to evaluate the amount of debris extruded apically as well as the time needed for removal of root canal filling material using ProTaper, MTwo, REndo NiTi rotary retreatment systems and hand files.Materials and methods: 60 freshly extracted human single-rooted teeth were instrumented with Protaper files and obturated with gutta-percha and MTA Fillapex sealer with the cold lateral compaction technique. Teeth were then randomly assigned to 4 groups. ProTaper, MTwo, REndo rotary retreatment systems and Hedstroem hand files were utilized for root canal filling removal. Debris extruded apically was collected into pre-weighed vials. The weight of the dry extruded debris was established by subtracting the pre-retreatment and post-retreatment weight of vials. Time needed for reaching WL, complete removal of gutta-percha and total retreatment time were also recorded with a stopwatch. The data obtained were analyzed using One-way ANOVA (the level of significance was set at P=0.05).Results: Hand instrumentation caused significantly more debris extrusion compared with rotary systems (P<0.001). There was no significant difference among the other groups (P>0.05). Hedstroem hand files needed significantly more time for the completion of the retreatment procedure than rotary systems (P<0.001). Among rotary retreatment files, ProTaper completed the procedure significantly quicker than MTwo and REndo (P<0.001).Conclusion: Rotary retreatment files caused less apical extrusion of debris and needed less time for the completion of the retreatment procedure compared to hand files.

scholarly journals Sealing Ability of Endodontic Cements: An In Vitro Study

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Amira Kikly ◽  
Sabra Jaâfoura ◽  
Dorra Kammoun ◽  
Saida Sahtout
Keyword(s):  
In Vitro Study ◽  
Resin Cement ◽  
Apical Region ◽  
Filling Material ◽  
Root Canals ◽  
Gutta Percha ◽  
Sealing Ability ◽  
Adhesive Dentistry ◽  
Significant Difference

The root canal system must be obturated using a hermetic seal to prevent the penetration of microorganisms and bacterial toxins into the endodontic system. The principles of adhesive dentistry have been increasingly used in endodontics. In fact, resin-based sealers are increasingly used. The objective of this study was to evaluate, in vitro, the sealing ability of resin cement in comparison with calcium hydroxide-based cement. Materials and Methods. Eighty root canals were prepared with the Tilos system and were randomly divided into four groups according to the filling material. The best combination was evaluated on the basis of its sealing ability. The dye infiltration degree was evaluated using both a stereomicroscope after diaphanization and the dye rise test. Results. A significant difference was observed between the four obturation systems with regard to the number of infiltrated walls (p=0.014) and the infiltration depth (p=0.025). The group of teeth obturated with EndoREZ® and EndoREZ® gutta cones differ significantly from the group obturated with EndoREZ® cement and gutta-percha cones in terms of apical sealing (p=0.011). A significant difference was also observed between the group of teeth obturated using EndoREZ® gutta cones and EndoREZ® cement and the group of teeth obturated with EndoREZ® cement (p=0.026). Conclusion. When used with EndoREZ® gutta cones, EndoREZ® cement showed the best sealing ability, particularly in the apical region. When used with gutta-percha cones, Acroseal and EndoREZ® cements exhibited similar sealing abilities.

scholarly journals UJI PENGGUNAAN BERBAGAI MEDIA TUMBUH DAN PEMBERIAN PUPUK GROWMORE PADA AKLIMATISASI TANAMAN ANGGREK Dendrobium

2019 ◽  
Vol 15 (2) ◽  
pp. 105-114
Author(s):  
GUSTI MARLINA ◽  
MARLINDA MARLINDA ◽  
HENI ROSNETI
Keyword(s):  
Plant Height ◽  
Growth Media ◽  
Growing Media ◽  
Randomized Design ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Completely Randomized Design ◽  
Difference Test ◽  
Honestly Significant Difference Test

The research objective was determine the effect of various growth media and growmore fertilizer on the acclimatization of Dendrobium orchids. study used a Completely Randomized Design (CRD) Factorial consisting of 2 factors, the first is (M) of growing media which consists of 3 levels, namely: M1 (medium fern root), M2 (wood charcoal medium), M3 (coir media coconut) and the second is (G) growmore fertilizer which consists of 4 levels, namely: G0 (without Growmore fertilizer), G1 (Growmore fertilizer 2 g / liter), G2 (fertilizer Growmore 4 g / liter), G3 (Growmore fertilizer 6 g / liter). Determine the growth of orchid plants, observations were made with the following parameters Growth Percentage (%), Plant Height (cm), Number of leaves (strands), and Number of tillers (stems). Data obtained were analyzed statistically, then continued with the Honestly Significant Difference Test (BNJ) at the level of 5%. The results showed that the single treatment of the use of growing media did not have a significant effect on the parameters of observation of growth percentage (%), plant height (cm), number of leaves (strands), and number of tillers (stems). The growth of growmore fertilizer also did not show a significant effect on the parameters of observation of growth percentage (%), plant height (cm), number of leaves (strands), and number of tillers (stems). Interaction of the use of various growth media and growmore fertilizer did not show a significant effect on the percentage of growth (%), plant height (cm), number of leaves (strands), and number of tillers (stems).

scholarly journals A Digital Microscopic Inspection of Dentinal Defects after Using Endodontic Retreatment Files

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Ammar AbuMostafa ◽  
Hala Almoqayyad ◽  
Al-Omari Mohammad
Keyword(s):  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Filling Material ◽  
Root Canals ◽  
Root Canal Retreatment ◽  
Significant Difference ◽  
Digital Microscope ◽  
Microscopic Inspection

Aim. The study aimed at evaluating the incidence of dentinal defects after root canal retreatment with ProTaper Universal retreatment (PTUR) and XP-endo Shaper and Finisher R (XP). Materials and Methods. Sixty extracted single-rooted human premolars were selected and divided into 4 groups of 15 teeth each. In the negative control group, the teeth were left unprepared. In the positive control group, the teeth were prepared with ProTaper Next and obturated with no further retreatment. In the PTUR and XP groups, the teeth were prepared and obturated followed by removal of the filling material at body temperature using PTUR and XP instruments, respectively. The roots were then sectioned at 3, 6, and 9 mm from the apex and observed under a digital microscope to detect defects. Results. PTUR group showed significantly higher ( p value <0.05) incidence of defects than the other groups. Comparison of no defects versus defects between groups in different areas of root canals demonstrated significant difference among the groups in the apical and cervical regions. Conclusion. Within the limitations of the present study, PTUR files created significantly more dentinal defects than XP files, with most of those defects at the cervical and apical areas of the root canals.

scholarly journals GuttaFlow Bioseal as Monocone Obturation Technique in Curved Root Canals: A Scanning Electron Microscopy Study

2021 ◽  
Vol 15 (2) ◽  
pp. 42-59
Author(s):  
Musliana Mustaffa ◽  
◽  
Hajar Ar Rahmah Nasri ◽  
Insyirah Kamarulzaman ◽  
Mohamad Shafiq Mohd Ibrahim ◽  
...  
Keyword(s):  
Surface Area ◽  
Root Canal ◽  
Current Approach ◽  
Filling Material ◽  
Sem Images ◽  
Root Canals ◽  
Gutta Percha ◽  
Curved Root Canals ◽  
Scanning Electron ◽  
Group 1

The obturation quality of GuttaFlow Bioseal in curved root canals is not commonly investigated although there has been a current approach toward utilizing this material in extracted molars in recent years. This study assessed the obturated surface area, extrusion of root filling material beyond the apical foramen and duration of obturation procedure in curved root canals using monocone obturation technique. Access cavity was prepared in 20 human mandibular molars. Root canals with curvature of more than 10 as determined according to Schneider’s method were included. Samples were prepared using Hyflex CM rotary files and divided into two groups (n=10): Group 1 [gutta-percha cone and GuttaFlow Bioseal] and Group 2 [gutta-percha cone and RoekoSeal Automix root canal sealer]. The duration of obturation procedure was recorded and obturation radiographs were taken. Samples were bisected and the mesial roots were sectioned horizontally to obtain 3 root segments; apical, middle and coronal. All resected roots were mounted on brass stubs, sputter-coated with thin platinum coating and observed under scanning electron microscope (SEM) at 70x magnification. The SEM images were transferred to the SketchAndCalc Area Calculator software. No statistically significant differences in the obturated surface area and extrusion of root filling material were observed between Group 1 and 2, irrespective of the status of root canal curvature. Duration for obturation in severe root canal curvatures between Group 1 and 2 were statistically significant. Obturated surface area and extrusion of root filling material were not affected by the root canal curvature, however duration for obturation using GuttaFlow Bioseal in severe root canal curvatures was slightly longer.

Sign in / Sign up

Export Citation Format

Share Document