Mechanical Analysis and Asphalt Layer Subdivision of Long Life Asphalt Pavement Structures

2008 ◽  
Vol 3 (2) ◽  
pp. 39-43
Author(s):  
Yihua Nie ◽  
Qisen Zhang
Keyword(s):  
Asphalt Pavement ◽  
Mechanical Analysis ◽  
Long Life ◽  
Pavement Structures

Numerical Simulation and Structural Mechanical Analysis of Asphalt Pavement due to Abrupt Temperature Drop

2014 ◽  
Vol 912-914 ◽  
pp. 255-262
Author(s):  
Bao Fu Ma ◽  
Ai Qin Shen ◽  
Chen Guang Wan
Keyword(s):  
Numerical Simulation ◽  
Asphalt Pavement ◽  
Temperature Drop ◽  
Bottom Layer ◽  
Mechanical Analysis ◽  
Cold Wave ◽  
Shear Stresses ◽  
The North ◽  
North Part ◽  
Pavement Structures

Due to the natural condition of the sudden temperature drop when the cold wave strikes the north part of China in winter, especially XinJiang province, the asphalt pavement structures need to be compared. Based on the pavement structures of the test road sections andthe domestic major pavement structures in other provinces, seven pavement structures were chosen. The numerical simulation of these seven pavement structures was performed and the force situations were analyzed respectively under the condition of extreme climate environment, which is the condition of cooling 40 °C from 0 °C in winter. The analysis of the temperature-load coupling of these pavement structures from seven different base forms were conducted. The comprehensive comparison was also made, such as stresses and strains at the bottom layer of asphalt, the stresses of the base, the shear stresses of the asphalt layer, and the compressive strains of the top of base, etc., in order to choose the preferred and most adapted asphalt pavement structure form.

scholarly journals Long-Term Performance of Pavement Structures with Cold In-Place Recycled Base Course

2021 ◽  
Vol 16 (2) ◽  
pp. 48-65
Author(s):  
Audrius Vaitkus ◽  
Judita Gražulytė ◽  
Andrius Baltrušaitis ◽  
Jurgita Židanavičiūtė ◽  
Donatas Čygas
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Pavements ◽  
Recycled Asphalt ◽  
Binding Agents ◽  
Pavement Structure ◽  
Pavement Structures ◽  
Base Course ◽  
Surface Distress ◽  
Foamed Bitumen

Properly designed and maintained asphalt pavements operate for ten to twenty-five years and have to be rehabilitated after that period. Cold in-place recycling has priority over all other rehabilitation methods since it is done without preheating and transportation of reclaimed asphalt pavement. Multiple researches on the performance of cold recycled mixtures have been done; however, it is unclear how the entire pavement structure (cold recycled asphalt pavement overlaid with asphalt mixture) performs depending on binding agents. The main objective of this research was to evaluate the performance of cold in-place recycled asphalt pavements considering binding agents (foamed bitumen in combination with cement or only cement) and figure out which binder leads to the best pavement performance. Three road sections rehabilitated in 2000, 2003, and 2005 were analysed. The performance of the entire pavement structure was evaluated in terms of the International Roughness Index, rut depth, and pavement surface distress in 2013 and 2017.

scholarly journals Comparisons between Asphalt Pavement Responses under Vehicular Loading and FWD Loading

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Song Yang ◽  
Bing Qi ◽  
Zhensheng Cao ◽  
Shaoqiang Zhang ◽  
Huailei Cheng ◽  
...  
Keyword(s):  
Critical Strain ◽  
Asphalt Pavement ◽  
Field Measurements ◽  
Flexible Pavement ◽  
Fe Model ◽  
Wide Range ◽  
Vehicular Speed ◽  
Pavement Structures ◽  
Falling Weight ◽  
Strain Responses

The strain responses of asphalt pavement layer under vehicular loading are different from those under falling weight deflectometer (FWD) loading, due to the discrepancies between the two types of loadings. This research aims to evaluate and compare the asphalt layer responses under vehicular loading and FWD loadings. Two full-scale asphalt pavement structures, namely, flexible pavement and semirigid pavement, were constructed and instrumented with strain gauges. The strain responses of asphalt layers under vehicular and FWD loadings were measured and analyzed. Except for field measurements, the finite element (FE) models of the experimental pavements were established to simulate the pavement responses under a wide range of loading conditions. Field strain measurements indicate that the asphalt layer strain under vehicular loading increases with the rising temperature roughly in an exponential mode, while it decreases with the rising vehicular speed approximately linearly. The strain pulses in the asphalt layer generated by FWD loading are different from those induced by vehicular loading. The asphalt layer strains generated by FWD loading are close to those induced by low vehicular speed (35 km/h). The results from the FE model imply that the asphalt layer strains under FWD loading and vehicular loading are distributed similarly in the depth profile. For flexible pavement, the position of critical strain shifts gradually from the bottom of the asphalt layer to the mid-depth of the layer, as the temperature increases. For semirigid pavement, the position of critical strain is always located at the intermediate depth of the asphalt layer, regardless of temperatures.

scholarly journals The Influence of Reclaimed Asphalt Pavement on the Mechanical Performance of Bituminous Mixtures. An Analysis at the Mortar Scale

2020 ◽  
Vol 12 (20) ◽  
pp. 8343
Author(s):  
Ana E. Hidalgo ◽  
Fernando Moreno-Navarro ◽  
Raúl Tauste ◽  
M. Carmen Rubio-Gámez
Keyword(s):  
Mechanical Performance ◽  
Asphalt Pavement ◽  
Mechanical Analysis ◽  
Elastic Response ◽  
Reclaimed Asphalt Pavement ◽  
Reclaimed Asphalt ◽  
Bituminous Mixtures ◽  
Water Sensitivity ◽  
Term Performance

The main characteristics of bituminous mixtures manufactured with a considerable amount of reclaimed asphalt pavement (RAP), compared to conventional mixtures, are a reduction in workability, an increase in stiffness, and a loss of ductility, due to the presence of the aged bitumen contained in the RAP particles. To minimize these impacts, softer binders or rejuvenators are commonly used in the design of these mixtures in order to restore part of the ductility lost and to reduce the stiffness. In spite of previous investigations demonstrating that the mortar plays an essential role in the workability, long-term performance, and durability of bituminous mixtures (where cracking, cohesion, and adhesion problems all start at this scale), not many studies have assessed the impacts caused by the presence of RAP. In response to this, the present paper analyzes the workability, fatigue performance, and water sensitivity of bituminous mortars containing different amounts of RAP (from 0% to 100%) and rejuvenators. Mortar specimens were compacted using a gyratory compactor and studied via dynamic mechanical analysis under three point bending configuration. The results demonstrated that the presence of RAP reduces the workability and ductility of asphalt mortars. However, it also causes an increase in their stiffness, which induces a more elastic response and causes an increase in their resistance to fatigue, which could compensate for the loss of ductility. This aspect, together with the low water sensitivity shown, when using Portland cement as an active filler, would make it possible to produce asphalt materials with high RAP contents with a similar long-term mechanical performance as traditional ones. In addition, the use of rejuvenators was demonstrated to effectively correct the negative workability and ductility impacts caused by using RAP, without affecting the fatigue resistance and material adhesion/cohesion.

scholarly journals Comparison of Two Typical Professional Programs for Mechanical Analysis of Interlayer Bonding of Asphalt Pavement Structure

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Shuangxi Li ◽  
Liang Tang ◽  
Kang Yao
Keyword(s):  
Asphalt Pavement ◽  
Mechanical Analysis ◽  
Layered System ◽  
Professional Programs ◽  
Comprehensive Comparison ◽  
Modeling Calculation ◽  
Pavement Structure ◽  
Calculation Processing ◽  
Interlayer Bonding ◽  
Selection Of

The mechanical analysis of interlayer bonding problem of asphalt pavement is performed by the elastic layered system theory or finite element method (FEM); then, a lot of specialized programs based on the above theories emerged successively, of which BISAR3.0 and EverStressFE are quite representative. In order to further clarify the characteristics of BISAR3.0 and EverStressFE for investigating interlayer bonding problem of asphalt pavement, this paper will carry out a comprehensive comparison from the specific realization viewpoint, such as the principle of interlayer bonding, modeling, calculation processing, and result treatment, and a specific example will be given to compare and analyze their functions. The results indicate that the two programs have certain comparability in analyzing the interlayer bonding problem of asphalt pavement, which will contribute to the foundation for the rational selection of asphalt pavement structure mechanical analysis program.

Sign in / Sign up

Export Citation Format

Share Document