A computational study on building’s roof shapes to utilize wind energy: Renewable energy application in Bangladesh

2019 ◽  
Author(s):  
Ishtier Rahman ◽  
Rahul D. Nath ◽  
Sajid Nakvee ◽  
Md. Touhidur Rahman Evan
Author(s):  
Sukanta Roy ◽  
Ujjwal K. Saha

Rapid depletion rate of fossil fuels with an increasing energy demand and their high emission are imposing the evolution activities in the arena of renewable energy. To meet the future demands of renewable energy sources, wind energy is a very promising concept. In this feature, the drag based vertical axis wind turbines (VAWTs) are suitable for small scale wind energy generation for decentralized locations. However, these turbines have low power and torque coefficients as compared to other wind turbines. Numerous blade shapes have been proposed till now to improve the performance of these turbines. In the present paper, a computational study has been performed to simulate the air-flow over different blade profiles using shear stress transport (SST) k–ω turbulence model. The results obtained are validated with the available experimental data. In the dynamic simulations, the power and torque coefficients are calculated considering the blade arc angle as the variable shape parameter. The effects of drag and lift forces on the variable blade shapes are also studied in static simulations at various angular positions. The present paper tries to demonstrate an effective computational methodology to predict the flow behavior around a drag based VAWT. Through this study, it has been found possible to select an optimal blade shape from the point of its aerodynamic performance.


2018 ◽  
Vol 7 (3) ◽  
pp. 1495 ◽  
Author(s):  
Saad S. Alrwashdeh

The Renewable energy potential in Jordan is enormous as it lies within the top of the world countries renewable resources. Electricity demand in Jordan plays a major role in the high amount of energy requring to cover the needs of heating, cooling, lighting, etc. For that, the availability of the wind distribution information becomes essential to help in the design and building of the wind energy application. In this study, a wind distribution map is provided of all Jordan governorates: Irbid, Mafraq, Ajloun, Jarash, Amman, Zarqa, Madaba, Balqa, Karak, Tafilah, Mann and Aqaba.  


2021 ◽  
Vol 13 (13) ◽  
pp. 7401
Author(s):  
Sedef E. Kara ◽  
Mustapha D. Ibrahim ◽  
Sahand Daneshvar

This paper examines the dual efficiency of bioenergy, renewable hydro energy, solar energy, wind energy, and geothermal energy for selected OECD countries through an integrated model with energy, economic, environmental, and social dimensions. Two questions are explored: Which renewable energy alternative is more dual efficient and productive? Which renewable energy alternative is best for a particular country? Data envelopment analysis (DEA) is used for the efficiency evaluation, and the global Malmquist productivity index is applied for productivity analysis. Results indicate bioenergy as the most efficient renewable energy alternative with a 20% increase in average efficiency in 2016 compared to 2012. Renewable hydro energy, wind energy, and solar energy show a 17.5%, 16%, and 11% increase, respectively. The average efficiency growth across all renewable energy alternatives signifies major advancement. Country performance in renewable energy is non-monolithic; therefore, they should customize their renewable energy portfolio accordingly to their strengths to enhance renewable energy efficiency. Renewable hydro appears to have the most positive productivity change in 2016 compared to 2012, while solar energy regressed in productivity due to its scale inefficiency. All renewable energy alternatives have relatively equal average pure efficiency change. The positive trend in efficiency and productivity provides an incentive for policy makers to pursue further development of renewable energy technologies with a focus on improving scale efficiency.


2014 ◽  
Vol 526 ◽  
pp. 211-216
Author(s):  
Qiong Ying Lv ◽  
Yu Shi Mei ◽  
Xi Jia Tao

As the trend of large-scale wind Power, People pay more attention to wind energy, which as a clean, renewable energy. Traditional unarmed climbing and crane lifting has been unable to meet the requirements of the equipment maintenance. Magnetic climb car can automatically crawl along the wall of the steel tower, the maintenance equipment and personnel can be sent to any height of the tower. The quality of the magnetic wall-climbing car is 550kg, which can carry 1.3 tons load. In this paper completed the magnetic wall-climbing car design and modeling, mechanical analysis in static and dynamic, obtained with the air gap and Magnetic Force curves. The application shows that the magnetic wall-climbing car meets the reliable adsorption, heavy-duty operation, simple operation etc..


Author(s):  
Sharmini Nakkela

Abstract: Modern study about utilizing energy from renewable energy sources was stimulus due to emerging oil crisis in older days due to uncontrolled use of conventional energy sources. Renewable Power Generation from wind and solar energy has become a significant proportion for the overall power generation in the grid. High penetration of Renewable Power Generation (RPG’s) effectreliable operation of bulk power system due to fluctuation of frequency and voltage of the network. The main objectives of high penetration of Renewable Power Generations in distribution system are Regulation of voltage, Mitigating voltage fluctuations due to flickers and Frequency control. The design and control of voltage regulation system using smart loads (SL’s) under large penetration of renewable energy system in distribution level is to be studied with the help of FACT devices like Static Compensator (STATCOM) and It is one of the fast active devices with accurate voltage regulation capability and most importantly for the sensitive/critical loads. Electric spring (ES) is proposed as compelling technique for guideline of framework voltage under fluctuating RPG's with next to no guide of correspondence framework [1]. It is a converter-based framework with self-commutated switches in span design, which is associated with non-basic burdens in series to go about as savvy load. These Smart Loads are controlled to direct voltage across basic burdens and hence partaking popular side administration. Expanded entrance of RPG’s, basically factor speed wind energy transformation framework is having impact on voltage and power quality [1][2]. In this paper, A contextual analysis of impact of variable speed wind energy framework on voltage is completed and which is demonstrated with fluctuating breeze speed. Execution examination of keen burdens are to be contrasted and existing receptive power compensator burdens and Improvement in voltage profile on test feeder is directed on a 3 Bus system and 15 Bus system. Keywords: Renewable energy system (RES), Electric spring (ES), STATCOM, Voltage Flicker, Smart load


2014 ◽  
Vol 10 (1) ◽  
pp. 38-45
Author(s):  
Angel Terziev ◽  
Ivan Antonov ◽  
Rositsa Velichkova

Abstract Increasing the share of renewable energy sources is one of the core policies of the European Union. This is because of the fact that this energy is essential in reducing the greenhouse gas emissions and securing energy supplies. Currently, the share of wind energy from all renewable energy sources is relatively low. The choice of location for a certain wind farm installation strongly depends on the wind potential. Therefore the accurate assessment of wind potential is extremely important. In the present paper an analysis is made on the impact of significant possible parameters on the determination of wind energy potential for relatively large areas. In the analysis the type of measurements (short- and long-term on-site measurements), the type of instrumentation and the terrain roughness factor are considered. The study on the impact of turbulence on the wind flow distribution over complex terrain is presented, and it is based on the real on-site data collected by the meteorological tall towers installed in the northern part of Bulgaria. By means of CFD based software a wind map is developed for relatively large areas. Different turbulent models in numerical calculations were tested and recommendations for the usage of the specific models in flows modeling over complex terrains are presented. The role of each parameter in wind map development is made. Different approaches for determination of wind energy potential based on the preliminary developed wind map are presented.


2017 ◽  
Vol 6 (2) ◽  
pp. 103 ◽  
Author(s):  
Ghulam Sarwar Kaloi ◽  
Jie Wang ◽  
Mazhar H Baloch ◽  
Sohaib Tahir

Unfortunately, Pakistan is facing an acute energy crisis since the past decade due to the increasing population growth and is heavily dependent on imports of fossil fuels. The shortage of the electricity is 14-18 hours in rural areas and 8-10 hours in urban areas. This situation has been significantly affecting the residential, industrial and commercial sectors in the country. At this time, it is immense challenges for the government to keep the power supply provision continue in the future for the country. In this situation, it has been the increased research to explore renewable energy resources in the country to fulfill the deficit scenario in the state. The renewable energy sector has not penetrated in the energy mix, currently in the upcoming markets. This paper highlights the steps taken by the country in the past and is taking steps at the present time to get rid of from the existing energy crisis when most urban areas are suffering from power outages for 12 hours on regular basis. Until 2009, no single grid interconnected wind established, but now the circumstances are changing significantly and wind farms are contributing to the national grid is the reality now. The initiation of the three wind farms interconnection network and many others in the pipeline are going to be operational soon. The federal policy on wind energy system has recently changed. Surprisingly, the continuing schemes of the wind farm are getting slow. This paper reviews developments in the wind energy sector in the country and lists some suggestions that can contribute to improving the penetration of wind energy in the national energy sector.Keywords: Wind energy, evolution of wind resource, Wind sites of PakistanArticle History: Received Dec 16th 2016; Received in revised form May 15th 2017; Accepted June 18th 2017; Available onlineHow to Cite This Article: Kaloi,G.S., Wang, J., Baloch, M.H and Tahir, S. (2017) Wind Energy Potential at Badin and Pasni Costal Line Pakistan. Int. Journal of Renewable Energy Development, 6(2), 103-110.https://doi.org/10.14710/ijred.6.2.103-110


Sign in / Sign up

Export Citation Format

Share Document