Nanocement Produced from Borosilicate Bioactive Glass Nanoparticles Composited with Alginate

2019 ◽  
Vol 72 (5) ◽  
pp. 354 ◽  
Author(s):  
Xin Xie ◽  
Libin Pang ◽  
Aihua Yao ◽  
Song Ye ◽  
Deping Wang
Keyword(s):  
Compressive Strength ◽  
Bioactive Glass ◽  
Sodium Alginate ◽  
Borosilicate Glass ◽  
Glass Phase ◽  
Solid Phase ◽  
Setting Time ◽  
Sol Gel ◽  
Bone Cements ◽  
Composite Bone

A novel injectable bone cement was prepared using sol–gel derived borosilicate bioactive glass nanoparticles as a solid phase and sodium alginate solution as a liquid phase. The gelation reaction of the alginate was modulated by Ca2+ ions released from the borosilicate glass phase, which in turn greatly depended on the boron content of the borosilicate glass phase. Such a gelation reaction not only significantly enhanced the anti-washout property of the bone cements, but also allowed control of the setting, handling properties, and compressive strength of the composite bone cements. Consequently, bone cements with controllable performances can be developed by simply adjusting the B2O3/SiO2 ratio of the borosilicate glass phase. Borosilicate bioactive glass with 20–30 mol-% borate contents exhibit a short setting time, good compressive strength, injectability, and anti-washout properties. With controllable performances and excellent bioactivity, the borosilicate bioactive glass/sodium alginate (BSBG/SA) composite bone cements are highly attractive for bone filling and regeneration applications.

The pH-Dependent Properties of the Biphasic Calcium Phosphate for Bone Cements

2014 ◽  
Vol 21 ◽  
pp. 3-16 ◽  
Author(s):  
Nuan La Ong Srakaew ◽  
Sirirat Tubsungnoen Rattanachan
Keyword(s):  
Compressive Strength ◽  
Liquid Phase ◽  
Calcium Phosphate ◽  
Phase Analysis ◽  
Calcium Phosphate Cement ◽  
Biphasic Calcium Phosphate ◽  
Setting Time ◽  
Bone Cements ◽  
Apatite Formation ◽  
Apatite Cement

Self-setting calcium phosphate cement (CPC) has been used in bone repair and substitution due to their excellent biocompatibility, bioactive as well as simplicity of preparation and use. The inherent brittleness and slow degradation are the major disadvantages for the use of calcium phosphate cements. To improve the degradation for the traditional CPC, the apatite cement formula incorporated with β-tricalcium phosphate (β-TCP) with varying concentration were studied and the effect of the pH value of liquid phase on the properties of this new calcium phosphate cement formula was evaluated. The apatite cements containing β-TCP for 10 and 40 wt.% were mixed into the aqueous solution with different pH values and then aging in absolute humidity at 37°C for 7 days. The setting time and phase analysis of the biphasic calcium phosphate were determined as compared to the apatite cement. For proper medical application, the compressive strength, the phase analysis and the degradation of the CPC samples at pH 7.0 and 7.4 were evaluated after soaking in the simulated body fluid (SBF) at 37°C for 7 days. The results indicated that the properties of the samples such as the setting time, the compressive strength related to the phase analysis of the set cements. The high degradation of the CPC was found in the cement with increasing β-TCP addition due to the phase after setting. Apatite formation with oriented plate-like morphology was also found to be denser on the surface of the biphasic bone cements after soaking in SBF for 7 days. The obtained results indicated that the cement containing β-TCP mixed with the liquid phase at pH 7.4 could be considered as a highly biodegradable and bioactive bone cement, as compared to the traditional CPC.

scholarly journals Brushite cement containing gelatin: evaluation of mechanical strength and in vitro degradation

Cerâmica ◽  
2019 ◽  
Vol 65 (374) ◽  
pp. 261-266 ◽  
Author(s):  
L. P. Silva ◽  
M. D. P. Ribeiro ◽  
E. S. Trichês ◽  
M. Motisuke
Keyword(s):  
Mechanical Properties ◽  
Weight Loss ◽  
Compressive Strength ◽  
Solid Phase ◽  
Setting Time ◽  
Biological Properties ◽  
Solubility In Water ◽  
Ringer’S Solution ◽  
Weight Loss Data

Abstract Calcium phosphate cements (CPCs) are potential materials for repairing bone defects, mainly due to their excellent biocompatibility and osteoconductivity. Nevertheless, their low mechanical properties limit their usage in clinical applications. The gelatin addition may improve the mechanical and biological properties of CPCs, but their solubility in water may increase the porosity of the cement during degradation. Thus, the aim of this work was to investigate the influence of gelatin on the setting time, compressive strength and degradation rate of a brushite cement. CPCs were prepared with the addition of 0, 5, 10 and 20 wt% of gelatin powder in the solid phase of the cement. The results indicated that the setting time increased with gelatin. Furthermore, cement with 20 wt% of gelatin had an initial compressive strength of 14.1±1.8 MPa while cement without gelatin had 4.5±1.2 MPa. The weight loss, morphology and compressive strength were evaluated after degradation in Ringer’s solution. According to the weight loss data, gelatin was eliminated of samples during degradation. It was concluded that the presence of gelatin improved CPCs mechanical properties; however, as degradation in Ringer’s solution evolved, cement compressive strength decreased due to gelatin dissolution and, consequently, an increase in sample porosity.

Preparation and Research of Porous Hydroxyapatite Whiskers/KGM Composite Bone Scaffolds

2013 ◽  
Vol 712-715 ◽  
pp. 415-419
Author(s):  
Ming Hua Huang ◽  
Qing Hua Chen ◽  
Li Lei ◽  
Duan Cheng Wang ◽  
Ting Ting Yan
Keyword(s):  
Compressive Strength ◽  
Degradation Rate ◽  
Pore Diameter ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
Average Pore Diameter ◽  
Average Pore ◽  
Bone Scaffolds ◽  
Composite Bone

Sol-gel method and freeze-drying method were adopted to prepare the porous HAPw/KGM composite bone scaffolds and ammonia was used as a crosslinking agent. The porosity, average pore diameter, compressive strength and degradation rate in vitro were measured according to the related standard. The curves of each factor and lever affecting comprehensive properties were drew through the orthogonal design L9 (34) experiment. SEM and XRD were applied in characterization. The results show that the optimal preparation program of the composite scaffolds is KGM (2g), HAPw (4.5g), ammonia (0.1 ml) and the freeze temperature (-20 ° C); the prepared scaffolds are porous three-dimensional network structures; the porosity of optimal scaffold is more than 90%; the average pore diameter is between 200-300μm; the compressive strength is about 0.8Mpa and the degradation rate is about 50% within 9 weeks.

scholarly journals Effect of bioactive glass addition on the physical properties of mineral trioxide aggregate

2021 ◽  
Vol 25 (1) ◽  
Author(s):  
Jei Kim ◽  
Hyun-Jung Kim ◽  
Seok Woo Chang ◽  
Soram Oh ◽  
Sun-Young Kim ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Bond Strength ◽  
Physical Properties ◽  
Bioactive Glass ◽  
Body Fluid ◽  
Setting Time ◽  
Mineral Trioxide Aggregate ◽  
Xrd Analysis ◽  
Control Group ◽  
Push Out

Abstract Background The addition of bioactive glass (BG), a highly bioactive material with remineralization potential, might improve the drawback of weakening property of mineral trioxide aggregates (MTA) when it encounters with body fluid. This study aims to evaluate the effect of BG addition on physical properties of MTA. Methods ProRoot (MTA), and MTA with various concentrations of BG (1, 2, 5 and 10% BG/MTA) were prepared. Simulated body fluid (SBF) was used to investigate the effect of the storage solution on dentin remineralization. Prepared specimens were examined as following; the push-out bond strength to dentin, compressive strength, setting time solubility and X-ray diffraction (XRD) analysis. Results The 2% BG/MTA showed higher push-out bond strengths than control group after 7 days of SBF storage. The 2% BG/MTA exhibited the highest compressive strength. Setting times were reduced in the 1 and 2% BG/MTA groups, and solubility of all experimental groups were clinically acceptable. In all groups, precipitates were observed in dentinal tubules via SEM. XRD showed the increased hydroxyapatite peaks in the 2, 5 and 10% BG/MTA groups. Conclusion It was verified that the BG-added MTA increased dentin push-out bond strength and compressive strength under SBF storage. The addition of BG did not negatively affect the MTA maturation reaction; it increased the amount of hydroxyapatite during SBF maturation.

Preparation and Characterization of Silk Fibroin/Calcium Phosphate Composite

2011 ◽  
Vol 332-334 ◽  
pp. 1655-1658
Author(s):  
Biao Wang ◽  
Rui Juan Xie ◽  
Yang Yang Huang
Keyword(s):  
Compressive Strength ◽  
Calcium Phosphate ◽  
Silk Fibroin ◽  
Solid Phase ◽  
Setting Time ◽  
Testing Machine ◽  
X Ray Diffraction ◽  
Acicular Crystal ◽  
Setting Times

In this paper, calcium phosphate cement (CPC) was prepared with tetracalcium phosphate (TTCP)/dicalcium phosphate anhydrous (DCPA) system as solid phase and phosphate buffered solution (PBS) as liquid phase, then silk fibroin (SF) was added into CPC to form silk fibroin/calcium phosphate composite. To study the effect of SF on the properties of composite, different mass fraction of SF was added into the composite. The surface morphology was observed by Scanning Electron Microscope. The setting time was investigated by ISO Cement Standard Consistency Instrument. The structure of the composite was studied by X-ray diffraction and infrared spectroscopy. Mechanical properties of samples were tested by Instron Universal Testing Machine. The results showed that the particles of SF could be seen obviously in the surface of all composite, and acicular crystal of hydroxyapatite (HA) was formed in the hardening body of both the composite and the pure CPC. The acicular crystal of HA derived from composite with SF appeared to be thinner. The setting times of the composites were all between 9 to 15min. Compared to pure CPC, the compressive strength and work-of-compressive of composites were all improved. The compressive strength of the composite with 1% SF increased obviously.

scholarly journals Experimental Drillable Magnesium Phosphate Cement Is a Promising Alternative to Conventional Bone Cements

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1925
Author(s):  
Philipp Heilig ◽  
Phoebe Sandner ◽  
Martin Cornelius Jordan ◽  
Rafael Gregor Jakubietz ◽  
Rainer Heribert Meffert ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Phytic Acid ◽  
Mechanical Performance ◽  
Setting Time ◽  
High Strength ◽  
Magnesium Phosphate ◽  
Bone Cements ◽  
Promising Alternative ◽  
Phytic Acid Content ◽  
With Screws

Clinically used mineral bone cements lack high strength values, absorbability and drillability. Therefore, magnesium phosphate cements have recently received increasing attention as they unify a high mechanical performance with presumed degradation in vivo. To obtain a drillable cement formulation, farringtonite (Mg3(PO4)2) and magnesium oxide (MgO) were modified with the setting retardant phytic acid (C6H18O24P6). In a pre-testing series, 13 different compositions of magnesium phosphate cements were analyzed concentrating on the clinical demands for application. Of these 13 composites, two cement formulations with different phytic acid content (22.5 wt% and 25 wt%) were identified to meet clinical demands. Both formulations were evaluated in terms of setting time, injectability, compressive strength, screw pullout tests and biomechanical tests in a clinically relevant fracture model. The cements were used as bone filler of a metaphyseal bone defect alone, and in combination with screws drilled through the cement. Both formulations achieved a setting time of 5 min 30 s and an injectability of 100%. Compressive strength was shown to be ~12–13 MPa and the overall displacement of the reduced fracture was <2 mm with and without screws. Maximum load until reduced fracture failure was ~2600 N for the cements only and ~3800 N for the combination with screws. Two new compositions of magnesium phosphate cements revealed high strength in clinically relevant biomechanical test set-ups and add clinically desired characteristics to its strength such as injectability and drillability.

A novel degradable tricalcium silicate/calcium polyphosphate/polyvinyl alcohol organic-inorganic composite cement for bone filling

2021 ◽  
pp. 088532822110203
Author(s):  
Rongguang Zhang ◽  
Jinbo Hu ◽  
Hong Chen ◽  
Zhengwen Ding ◽  
Yalan Ouyang ◽  
...  
Keyword(s):  
Polyvinyl Alcohol ◽  
Bone Cement ◽  
Setting Time ◽  
Biological Properties ◽  
Tricalcium Silicate ◽  
Bone Cements ◽  
Matrix Mineralization ◽  
Calcium Polyphosphate ◽  
Composite Bone

In this study, tricalcium silicate (C3S) calcium/polyphosphate/polyvinyl alcohol organic-inorganic self-setting composites were successfully designed. A variety of tests were conducted to characterize their self-setting properties, mechanical properties, degradation properties, and related biological properties. The composite bone cements showed a short setting time (5.5–37.5 min) with a 5:5–6:4 ratio of C3S/CPP to maintain a stable compressive strength (28 MPa). In addition, PVA effectively reduced the brittleness of the inorganic phase. Degradation experiments confirmed the sustainable surface degradation of bone cement. A maximum degradation rate of 49% was reached within 56 days, and the structure remained intact without collapse. Culturing MC3T3 cells with bone cement extracts revealed that the composite bone cements had excellent biological properties in vitro. The original extract showed a proliferation promotion effect on cells, whereas most of the other original extracts of degradable bone cements were toxic to the cells. Meanwhile, extracellular matrix mineralization and alkaline phosphatase expression showed remarkable effects on cell differentiation. In addition, a good level of adhesion of cells to the surfaces of materials was observed. Taken together, these results indicate that C3S/CPP/PVA composite bone cements have great potential in bone defect filling for fast curing.

scholarly journals Influence of Natural Polysaccharides on Properties of the Biomicroconcrete-Type Bioceramics

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7496
Author(s):  
Piotr Pańtak ◽  
Ewelina Cichoń ◽  
Joanna Czechowska ◽  
Aneta Zima
Keyword(s):  
Compressive Strength ◽  
Sodium Alginate ◽  
Solid Phase ◽  
Hydroxypropyl Methylcellulose ◽  
Biological Properties ◽  
High Plasticity ◽  
Cement Pastes ◽  
Setting Reaction ◽  
Pectin Gel ◽  
Bioactive Potential

In this paper, novel hybrid biomicroconcrete-type composites were developed and investigated. The solid phase of materials consisted of a highly reactive α -tricalcium phosphate (α-TCP) powder, hybrid hydroxyapatite-chitosan (Hap-CTS) material in the form of powder and granules (as aggregates), and the polysaccharides sodium alginate (SA) or hydroxypropyl methylcellulose (HPMC). The liquid/gel phase in the studied materials constituted a citrus pectin gel. The influence of SA or HPMC on the setting reaction, microstructure, mechanical as well as biological properties of biomicroconcretes was investigated. Studies revealed that manufactured cement pastes were characterized by high plasticity and cohesion. The dual setting system of developed biomicroconcretes, achieved through α-TCP setting reaction and polymer crosslinking, resulted in a higher compressive strength. Material with the highest content of sodium alginate possessed the highest mechanical strength (~17 MPa), whereas the addition of hydroxypropyl methylcellulose led to a subtle compressive strength decrease. The obtained biomicroconcretes were chemically stable and characterized by a high bioactive potential. The novel biomaterials with favorable physicochemical and biological properties can be prosperous materials for filling bone tissue defects of any shape and size.

Sign in / Sign up

Export Citation Format

Share Document