scholarly journals Direct observation of actin filament severing by gelsolin and binding by gCap39 and CapZ.

1991 ◽  
Vol 115 (6) ◽  
pp. 1629-1638 ◽  
Author(s):  
E L Bearer
Keyword(s):  
Actin Filament ◽  
Direct Observation ◽  
Actin Filaments ◽  
Molecular Mechanisms ◽  
Actin Binding ◽  
Filamentous Actin ◽  
Rhodamine Phalloidin ◽  
Capping Protein ◽  
Calcium Dependent ◽  
Definition Of

Dynamic behavior of actin filaments in cells is the basis of many different cellular activities. Remodeling of the actin filament network involves polymerization and depolymerization of the filaments. Proteins that regulate these behaviors include proteins that sever and/or cap actin filaments. This report presents direct observation of severing of fluorescently-labeled actin filaments. Coverslips coated with gelsolin, a multi-domain, calcium-dependent capping and severing protein, bound rhodamine-phalloidin-saturated filaments along their length in the presence of EGTA. Upon addition of calcium, attached filaments bent as they broke. Actophorin, a low molecular weight, monomer sequestering, calcium-independent severing protein did not sever phalloidin-saturated filaments. Both gCap 39, a gelsolin-like, calcium-dependent capping protein that does not sever filaments, and CapZ, a heterodimeric, non-calcium-dependent capping protein, bound the filaments by one end to the coverslip. Visualization of individual filaments also revealed severing activity present in mixtures of actin-binding proteins isolated by filamentous actin affinity chromatography from early Drosophila embryos. This activity was different from either gelsolin or actophorin because it was not inhibited by phalloidin, but was calcium independent. The results of these studies provide new information about the molecular mechanisms of severing and capping by well-characterized proteins as well as definition of a novel type of severing activity.

scholarly journals Osmotic stress and the yeast cytoskeleton: phenotype-specific suppression of an actin mutation.

1992 ◽  
Vol 118 (3) ◽  
pp. 561-571 ◽  
Author(s):  
S Chowdhury ◽  
K W Smith ◽  
M C Gustin
Keyword(s):  
Osmotic Stress ◽  
Actin Filament ◽  
Physiological Process ◽  
Actin Binding ◽  
Temperature Sensitive ◽  
Filamentous Actin ◽  
Cortical Actin ◽  
Yeast Saccharomyces Cerevisiae ◽  
Rhodamine Phalloidin ◽  
Diploid Cells

In the yeast Saccharomyces cerevisiae, actin filaments function to direct cell growth to the emerging bud. Yeast has a single essential actin gene, ACT1. Diploid cells containing a single copy of ACT1 are osmosensitive (Osms), i.e., they fail to grow in high osmolarity media (D. Shortle, unpublished observations cited by Novick, P., and D. Botstein. 1985. Cell. 40:415-426). This phenotype suggests that an underlying physiological process involving actin is osmosensitive. Here, we demonstrate that this physiological process is a rapid and reversible change in actin filament organization in cells exposed to osmotic stress. Filamentous actin was stained using rhodamine phalloidin. Increasing external osmolarity caused a rapid loss of actin filament cables, followed by a slower redistribution of cortical actin filament patches. In the recovery phase, cables and patches were restored to their original levels and locations. Strains containing an act1-1 mutation are both Osms and temperature-sensitive (Ts) (Novick and Botstein, 1985). To identify genes whose products functionally interact with actin in cellular responses to osmotic stress, we have isolated extragenic suppressors which revert only the Osms but not the Ts phenotype of an act1-1 mutant. These suppressors identify three genes, RAH1-RAH3. Morphological and genetic properties of a dominant suppressor mutation suggest that the product of the wild-type allele, RAH3+, is an actin-binding protein that interacts with actin to allow reassembly of the cytoskeleton following osmotic stress.

scholarly journals αE-catenin actin-binding domain alters actin filament conformation and regulates binding of nucleation and disassembly factors

2013 ◽  
Vol 24 (23) ◽  
pp. 3710-3720 ◽  
Author(s):  
Scott D. Hansen ◽  
Adam V. Kwiatkowski ◽  
Chung-Yueh Ouyang ◽  
HongJun Liu ◽  
Sabine Pokutta ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Binding Domain ◽  
Actin Binding ◽  
Filamentous Actin ◽  
Filament Structure ◽  
Actin Binding Domain ◽  
Filament Bundles ◽  
Underlying Mechanisms ◽  
Cell Cell

The actin-binding protein αE-catenin may contribute to transitions between cell migration and cell–cell adhesion that depend on remodeling the actin cytoskeleton, but the underlying mechanisms are unknown. We show that the αE-catenin actin-binding domain (ABD) binds cooperatively to individual actin filaments and that binding is accompanied by a conformational change in the actin protomer that affects filament structure. αE-catenin ABD binding limits barbed-end growth, especially in actin filament bundles. αE-catenin ABD inhibits actin filament branching by the Arp2/3 complex and severing by cofilin, both of which contact regions of the actin protomer that are structurally altered by αE-catenin ABD binding. In epithelial cells, there is little correlation between the distribution of αE-catenin and the Arp2/3 complex at developing cell–cell contacts. Our results indicate that αE-catenin binding to filamentous actin favors assembly of unbranched filament bundles that are protected from severing over more dynamic, branched filament arrays.

scholarly journals The structure of the actin filament uncapping complex mediated by twinfilin

2021 ◽  
Vol 7 (5) ◽  
pp. eabd5271
Author(s):  
Dennis M. Mwangangi ◽  
Edward Manser ◽  
Robert C. Robinson
Keyword(s):  
Actin Filament ◽  
Protein Interactions ◽  
Protein Complex ◽  
Actin Filaments ◽  
Actin Binding ◽  
Capping Protein ◽  
Binding Surface ◽  
Actin Capping Protein ◽  
Actin Capping

Uncapping of actin filaments is essential for driving polymerization and depolymerization dynamics from capping protein–associated filaments; however, the mechanisms of uncapping leading to rapid disassembly are unknown. Here, we elucidated the x-ray crystal structure of the actin/twinfilin/capping protein complex to address the mechanisms of twinfilin uncapping of actin filaments. The twinfilin/capping protein complex binds to two G-actin subunits in an orientation that resembles the actin filament barbed end. This suggests an unanticipated mechanism by which twinfilin disrupts the stable capping of actin filaments by inducing a G-actin conformation in the two terminal actin subunits. Furthermore, twinfilin disorders critical actin-capping protein interactions, which will assist in the dissociation of capping protein, and may promote filament uncapping through a second mechanism involving V-1 competition for an actin-binding surface on capping protein. The extensive interactions with capping protein indicate that the evolutionary conserved role of twinfilin is to uncap actin filaments.

scholarly journals Twinfilin, a molecular mailman for actin monomers

2002 ◽  
Vol 115 (5) ◽  
pp. 881-886 ◽  
Author(s):  
Sandra Palmgren ◽  
Maria Vartiainen ◽  
Pekka Lappalainen
Keyword(s):  
Drosophila Melanogaster ◽  
Actin Filament ◽  
Binding Sites ◽  
Actin Filaments ◽  
Actin Binding ◽  
Actin Monomer ◽  
Nucleotide Exchange ◽  
Capping Protein ◽  
Filament Assembly

Twinfilin is a ubiquitous actin-monomer-binding protein that is composed of two ADF-homology domains. It forms a 1:1 complex with ADP-actin-monomers,inhibits nucleotide exchange on actin monomers and prevents assembly of the monomer into filaments. The two ADF-H domains in twinfilin probably have 3D structures similar to those of the ADF/cofilin proteins and overlapping actin-binding sites. Twinfilin also interacts with PtdIns(4,5)P2, which inhibits its actin-monomer-sequestering activity in vitro. Mutations in the twinfilin gene result in defects in the bipolar budding pattern in S. cerevisiae and in a rough eye phenotype and aberrant bristle morphology in Drosophila melanogaster. These phenotypes are caused by the uncontrolled polymerization of actin filaments in the absence of twinfilin. Studies on budding yeast suggest that twinfilin contributes to actin filament turnover by localizing actin monomers, in their `inactive'ADP-form, to the sites of rapid filament assembly. This is mediated through direct interactions between twinfilin and capping protein. Therefore,twinfilin might serve as a link between rapid actin filament depolymerization and assembly in cells.

scholarly journals Structural effects and functional implications of phalloidin and jasplakinolide binding to actin filaments

2019 ◽  
Author(s):  
Sabrina Pospich ◽  
Felipe Merino ◽  
Stefan Raunser
Keyword(s):  
High Resolution ◽  
Actin Filament ◽  
Actin Filaments ◽  
Inorganic Phosphate ◽  
Binding Proteins ◽  
Conformational Space ◽  
Actin Binding ◽  
List Type ◽  
Filamentous Actin ◽  
Actin Binding Proteins

SummaryActin undergoes structural transitions during polymerization, ATP hydrolysis and subsequent release of inorganic phosphate. Several actin binding proteins sense specific states during this transition and can thus target different regions of the actin filament. Here we show in atomic detail that phalloidin, a mushroom toxin that is routinely used to stabilize and label actin filaments, suspends the structural changes in actin, likely influencing its interaction with actin binding proteins. Furthermore, high-resolution cryo-EM structures reveal structural rearrangements in F-actin upon inorganic phosphate release in phalloidin-stabilized filaments. We find that the effect of the sponge toxin jasplakinolide differs from the one of phalloidin, despite their overlapping binding site and similar interactions with the actin filament. Analysis of structural conformations of F-actin suggests that stabilizing agents trap states within the natural conformational space of actin.Abstract FigureHighlightsFive high-resolution cryo-EM structures of stabilized filamentous actinPhalloidin traps different structural states depending on when it is addedThe effect of phalloidin and jasplakinolide on filamentous actin is not identicalBoth toxins likely interfere with the binding of proteins sensing F-actin’s nucleotide state

scholarly journals Actin filaments in yeast are unstable in the absence of capping protein or fimbrin.

1995 ◽  
Vol 131 (6) ◽  
pp. 1483-1493 ◽  
Author(s):  
T S Karpova ◽  
K Tatchell ◽  
J A Cooper
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Actin Filament ◽  
Actin Filaments ◽  
Binding Proteins ◽  
Actin Binding ◽  
Actin Binding Proteins ◽  
Capping Protein ◽  
Filament Assembly

Many actin-binding proteins affect filament assembly in vitro and localize with actin in vivo, but how their molecular actions contribute to filament assembly in vivo is not understood well. We report here that capping protein (CP) and fimbrin are both important for actin filament assembly in vivo in Saccharomyces cerevisiae, based on finding decreased actin filament assembly in CP and fimbrin mutants. We have also identified mutations in actin that enhance the CP phenotype and find that those mutants also have decreased actin filament assembly in vivo. In vitro, actin purified from some of these mutants is defective in polymerization or binding fimbrin. These findings support the conclusion that CP acts to stabilize actin filaments in vivo. This conclusion is particularly remarkable because it is the opposite of the conclusion drawn from recent studies in Dictyostelium (Hug, C., P.Y. Jay, I. Reddy, J.G. McNally, P.C. Bridgman, E.L. Elson, and J.A. Cooper. 1995. Cell. 81:591-600). In addition, we find that the unpolymerized pool of actin in yeast is very small relative to that found in higher cells, which suggests that actin filament assembly is less dynamic in yeast than higher cells.

scholarly journals Cofilin is a pH sensor for actin free barbed end formation: role of phosphoinositide binding

2008 ◽  
Vol 183 (5) ◽  
pp. 865-879 ◽  
Author(s):  
Christian Frantz ◽  
Gabriela Barreiro ◽  
Laura Dominguez ◽  
Xiaoming Chen ◽  
Robert Eddy ◽  
...  
Keyword(s):  
Actin Filament ◽  
Structural Changes ◽  
Ph Sensor ◽  
Ph Sensitive ◽  
Actin Binding ◽  
Filamentous Actin ◽  
Filament Dynamics ◽  
Ph Dependent ◽  
Dynamics Simulations

Newly generated actin free barbed ends at the front of motile cells provide sites for actin filament assembly driving membrane protrusion. Growth factors induce a rapid biphasic increase in actin free barbed ends, and we found both phases absent in fibroblasts lacking H+ efflux by the Na-H exchanger NHE1. The first phase is restored by expression of mutant cofilin-H133A but not unphosphorylated cofilin-S3A. Constant pH molecular dynamics simulations and nuclear magnetic resonance (NMR) reveal pH-sensitive structural changes in the cofilin C-terminal filamentous actin binding site dependent on His133. However, cofilin-H133A retains pH-sensitive changes in NMR spectra and severing activity in vitro, which suggests that it has a more complex behavior in cells. Cofilin activity is inhibited by phosphoinositide binding, and we found that phosphoinositide binding is pH-dependent for wild-type cofilin, with decreased binding at a higher pH. In contrast, phosphoinositide binding by cofilin-H133A is attenuated and pH insensitive. These data suggest a molecular mechanism whereby cofilin acts as a pH sensor to mediate a pH-dependent actin filament dynamics.

scholarly journals Cortical filamentous actin disassembly and scinderin redistribution during chromaffin cell stimulation precede exocytosis, a phenomenon not exhibited by gelsolin.

1991 ◽  
Vol 113 (5) ◽  
pp. 1057-1067 ◽  
Author(s):  
M L Vitale ◽  
A Rodríguez Del Castillo ◽  
L Tchakarov ◽  
J M Trifaró
Keyword(s):  
Actin Filament ◽  
Chromaffin Cells ◽  
Chromaffin Cell ◽  
Catecholamine Secretion ◽  
Cortical Region ◽  
Cortical Surface ◽  
Filamentous Actin ◽  
Cell Stimulation ◽  
Rhodamine Phalloidin ◽  
Filament Networks

Immunofluorescence and cytochemical studies have demonstrated that filamentous actin is mainly localized in the cortical surface of the chromaffin cell. It has been suggested that these actin filament networks act as a barrier to the secretory granules, impeding their contact with the plasma membrane. Stimulation of chromaffin cells produces a disassembly of actin filament networks, implying the removal of the barrier. The presence of gelsolin and scinderin, two Ca(2+)-dependent actin filament severing proteins, in the cortical surface of the chromaffin cells, suggests the possibility that cell stimulation brings about activation of one or more actin filament severing proteins with the consequent disruption of actin networks. Therefore, biochemical studies and fluorescence microscopy experiments with scinderin and gelsolin antibodies and rhodamine-phalloidin, a probe for filamentous actin, were performed in cultured chromaffin cells to study the distribution of scinderin, gelsolin, and filamentous actin during cell stimulation and to correlate the possible changes with catecholamine secretion. Here we report that during nicotinic stimulation or K(+)-evoked depolarization, subcortical scinderin but not gelsolin is redistributed and that this redistribution precedes catecholamine secretion. The rearrangement of scinderin in patches is mediated by nicotinic receptors. Cell stimulation produces similar patterns of distribution of scinderin and filamentous actin. However, after the removal of the stimulus, the recovery of scinderin cortical pattern of distribution is faster than F-actin reassembly, suggesting that scinderin is bound in the cortical region of the cell to a component other than F-actin. We also demonstrate that peripheral actin filament disassembly and subplasmalemmal scinderin redistribution are calcium-dependent events. Moreover, experiments with an antibody against dopamine-beta-hydroxylase suggest that exocytosis sites are preferentially localized to areas of F-actin disassembly.

Purification and characterization of a nonpolymerizing long-pitch actin dimer

2006 ◽  
Vol 84 (5) ◽  
pp. 695-702 ◽  
Author(s):  
Braden Sweeting ◽  
John F. Dawson
Keyword(s):  
Critical Concentration ◽  
Dnase I ◽  
Actin Binding ◽  
Wild Type ◽  
Filamentous Actin ◽  
Rhodamine Phalloidin ◽  
Fold Reduction ◽  
Crystallization Conditions ◽  
Self Association ◽  
Pointed End

Atomic resolution structures of filamentous actin have not been obtained owing to the self-association of actin under crystallization conditions. Obtaining short filamentous actin complexes of defined lengths is therefore a highly desirable goal. Here we report the production and isolation of a long-pitch actin dimer employing chemical crosslinking between wild-type actin and Q41C/C374A mutant actin. The Q41C/C374A mutant actin possessed altered polymerization properties, with a 2-fold reduction in the rate of elongation and an increased critical concentration relative to wild-type actin. The Q41C/C374A mutant actin also displayed an increase in the IC50 for DNase I, a pointed-end actin-binding protein. The long-pitch dimer was bound by DNase I to prevent polymerization and purified. It was found that each actin dimer is bound by 2 DNase I molecules, 1 likely bound to each of the actin protomers. The long-pitch dimer bound by DNase I did not form short F actin structures, as assessed by the binding of rhodamine–phalloidin.

Sign in / Sign up

Export Citation Format

Share Document