scholarly journals Flow-enhanced adhesion regulated by a selectin interdomain hinge

2006 ◽  
Vol 174 (7) ◽  
pp. 1107-1117 ◽  
Author(s):  
Jizhong Lou ◽  
Tadayuki Yago ◽  
Arkadiusz G. Klopocki ◽  
Padmaja Mehta ◽  
Wei Chen ◽  
...  
Keyword(s):  
Single Molecule ◽  
Rotational Diffusion ◽  
Flow Chamber ◽  
Site Directed Mutagenesis ◽  
Transport Mechanisms ◽  
Binding Interface ◽  
Selectin Ligand ◽  
Dynamics Simulations ◽  
Hinge Angle ◽  
Catch Bonds

L-selectin requires a threshold shear to enable leukocytes to tether to and roll on vascular surfaces. Transport mechanisms govern flow-enhanced tethering, whereas force governs flow-enhanced rolling by prolonging the lifetimes of L-selectin–ligand complexes (catch bonds). Using selectin crystal structures, molecular dynamics simulations, site-directed mutagenesis, single-molecule force and kinetics experiments, Monte Carlo modeling, and flow chamber adhesion studies, we show that eliminating a hydrogen bond to increase the flexibility of an interdomain hinge in L-selectin reduced the shear threshold for adhesion via two mechanisms. One affects the on-rate by increasing tethering through greater rotational diffusion. The other affects the off-rate by strengthening rolling through augmented catch bonds with longer lifetimes at smaller forces. By forcing open the hinge angle, ligand may slide across its interface with L-selectin to promote rebinding, thereby providing a mechanism for catch bonds. Thus, allosteric changes remote from the ligand-binding interface regulate both bond formation and dissociation.

scholarly journals Optimizing mechanostable anchor points of engineered lipocalin in complex with CTLA-4

2021 ◽  
Author(s):  
Zhaowei Liu ◽  
Rodrigo A. Moreira ◽  
Ana Dujmović ◽  
Haipei Liu ◽  
Byeongseon Yang ◽  
...  
Keyword(s):  
Single Molecule ◽  
Genetic Mutation ◽  
Affinity Maturation ◽  
Network Modelling ◽  
Binding Strength ◽  
Binding Interface ◽  
Anchor Points ◽  
Anisotropic Network ◽  
Dynamics Simulations ◽  
Force Range

AbstractWe used single-molecule AFM force spectroscopy (AFM-SMFS) to screen residues along the backbone of a non-antibody protein binding scaffold (lipocalin/anticalin), and determine the optimal anchor point that maximizes binding strength of the interaction with its target (CTLA-4). By incorporating non-canonical amino acids into anticalin, and using click chemistry to attach an Fgβ peptide at internal sequence positions, we were able to mechanically dissociate anticalin from CTLA-4 by pulling from eight different anchoring residues using an AFM cantilever tip. We found that pulling on the anticalin from residue 60 or 87 resulted in significantly higher rupture forces and a decrease in koff by 2-3 orders of magnitude over a force range of 50-200 pN. Five of the six internal pulling points tested were significantly more stable than N- or C-terminal anchor points, rupturing at up to 250 pN at loading rates of 0.1-10 nN sec-1. Anisotropic network modelling and molecular dynamics simulations using the Gō-MARTINI approach explained the mechanism underlying the geometric dependency of mechanostability. These results suggest that optimization of attachment residue position for therapeutic and diagnostic cargo can provide large improvements in binding strength, allowing affinity maturation without requiring genetic mutation of binding interface residues.

scholarly journals Metal ions and sugar puckering balance single-molecule kinetic heterogeneity in RNA and DNA tertiary contacts

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Fabio D. Steffen ◽  
Mokrane Khier ◽  
Danny Kowerko ◽  
Richard A. Cunha ◽  
Richard Börner ◽  
...  
Keyword(s):  
Single Molecule ◽  
Metal Ion ◽  
Metal Ion Binding ◽  
Single Molecule Fret ◽  
Binding Interface ◽  
Structural Rigidity ◽  
Sugar Puckering ◽  
Dynamics Simulations ◽  
Rna And Dna ◽  
Kinetic Heterogeneity

AbstractThe fidelity of group II intron self-splicing and retrohoming relies on long-range tertiary interactions between the intron and its flanking exons. By single-molecule FRET, we explore the binding kinetics of the most important, structurally conserved contact, the exon and intron binding site 1 (EBS1/IBS1). A comparison of RNA-RNA and RNA-DNA hybrid contacts identifies transient metal ion binding as a major source of kinetic heterogeneity which typically appears in the form of degenerate FRET states. Molecular dynamics simulations suggest a structural link between heterogeneity and the sugar conformation at the exon-intron binding interface. While Mg2+ ions lock the exon in place and give rise to long dwell times in the exon bound FRET state, sugar puckering alleviates this structural rigidity and likely promotes exon release. The interplay of sugar puckering and metal ion coordination may be an important mechanism to balance binding affinities of RNA and DNA interactions in general.

Structural dynamics of P-type ATPase ion pumps

2019 ◽  
Vol 47 (5) ◽  
pp. 1247-1257 ◽  
Author(s):  
Mateusz Dyla ◽  
Sara Basse Hansen ◽  
Poul Nissen ◽  
Magnus Kjaergaard
Keyword(s):  
Structural Dynamics ◽  
Single Molecule ◽  
New Technologies ◽  
Atp Hydrolysis ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Time Resolved ◽  
Dynamics Simulations ◽  
Types Of Information ◽  
P Type

Abstract P-type ATPases transport ions across biological membranes against concentration gradients and are essential for all cells. They use the energy from ATP hydrolysis to propel large intramolecular movements, which drive vectorial transport of ions. Tight coordination of the motions of the pump is required to couple the two spatially distant processes of ion binding and ATP hydrolysis. Here, we review our current understanding of the structural dynamics of P-type ATPases, focusing primarily on Ca2+ pumps. We integrate different types of information that report on structural dynamics, primarily time-resolved fluorescence experiments including single-molecule Förster resonance energy transfer and molecular dynamics simulations, and interpret them in the framework provided by the numerous crystal structures of sarco/endoplasmic reticulum Ca2+-ATPase. We discuss the challenges in characterizing the dynamics of membrane pumps, and the likely impact of new technologies on the field.

Molecular Basis of Glucose Transport Mechanism in Plants

2019 ◽  
Author(s):  
Balaji Selvam ◽  
Ya-Chi Yu ◽  
Liqing Chen ◽  
Diwakar Shukla
Keyword(s):  
Molecular Dynamics ◽  
Free Energy ◽  
Molecular Dynamics Simulations ◽  
Conformational Changes ◽  
Transport Mechanism ◽  
Conformational Dynamics ◽  
Site Directed Mutagenesis ◽  
Free Energy Barrier ◽  
Transport Cycle ◽  
Dynamics Simulations

<p>The SWEET family belongs to a class of transporters in plants that undergoes large conformational changes to facilitate transport of sugar molecules across the cell membrane. However, the structures of their functionally relevant conformational states in the transport cycle have not been reported. In this study, we have characterized the conformational dynamics and complete transport cycle of glucose in OsSWEET2b transporter using extensive molecular dynamics simulations. Using Markov state models, we estimated the free energy barrier associated with different states as well as 1 for the glucose the transport mechanism. SWEETs undergoes structural transition to outward-facing (OF), Occluded (OC) and inward-facing (IF) and strongly support alternate access transport mechanism. The glucose diffuses freely from outside to inside the cell without causing major conformational changes which means that the conformations of glucose unbound and bound snapshots are exactly same for OF, OC and IF states. We identified a network of hydrophobic core residues at the center of the transporter that restricts the glucose entry to the cytoplasmic side and act as an intracellular hydrophobic gate. The mechanistic predictions from molecular dynamics simulations are validated using site-directed mutagenesis experiments. Our simulation also revealed hourglass like intermediate states making the pore radius narrower at the center. This work provides new fundamental insights into how substrate-transporter interactions actively change the free energy landscape of the transport cycle to facilitate enhanced transport activity.</p>

scholarly journals New insights into structure and function of bis-phosphinic acid derivatives and implications for CFTR modulation

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sara Bitam ◽  
Ahmad Elbahnsi ◽  
Geordie Creste ◽  
Iwona Pranke ◽  
Benoit Chevalier ◽  
...  
Keyword(s):  
Phosphinic Acid ◽  
Site Directed Mutagenesis ◽  
Side Chain ◽  
Transmembrane Conductance Regulator ◽  
Intracellular Loop ◽  
Respiratory Cells ◽  
Cftr Protein ◽  
Dynamics Simulations ◽  
And Function ◽  
Molecular Mode

AbstractC407 is a compound that corrects the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein carrying the p.Phe508del (F508del) mutation. We investigated the corrector effect of c407 and its derivatives on F508del-CFTR protein. Molecular docking and dynamics simulations combined with site-directed mutagenesis suggested that c407 stabilizes the F508del-Nucleotide Binding Domain 1 (NBD1) during the co-translational folding process by occupying the position of the p.Phe1068 side chain located at the fourth intracellular loop (ICL4). After CFTR domains assembly, c407 occupies the position of the missing p.Phe508 side chain. C407 alone or in combination with the F508del-CFTR corrector VX-809, increased CFTR activity in cell lines but not in primary respiratory cells carrying the F508del mutation. A structure-based approach resulted in the synthesis of an extended c407 analog G1, designed to improve the interaction with ICL4. G1 significantly increased CFTR activity and response to VX-809 in primary nasal cells of F508del homozygous patients. Our data demonstrate that in-silico optimized c407 derivative G1 acts by a mechanism different from the reference VX-809 corrector and provide insights into its possible molecular mode of action. These results pave the way for novel strategies aiming to optimize the flawed ICL4–NBD1 interface.

scholarly journals Optimal Relabeling of Water Molecules and Single-Molecule Entropy Estimation

Biophysica ◽  
2021 ◽  
Vol 1 (3) ◽  
pp. 279-296
Author(s):  
Federico Fogolari ◽  
Gennaro Esposito
Keyword(s):  
Single Molecule ◽  
Degrees Of Freedom ◽  
Water Molecules ◽  
Maximum Information ◽  
Nearest Neighbours ◽  
Biomolecular Simulations ◽  
Solvent Molecules ◽  
Solvation Entropy ◽  
Dynamics Simulations ◽  
Internal Degrees Of Freedom

Estimation of solvent entropy from equilibrium molecular dynamics simulations is a long-standing problem in statistical mechanics. In recent years, methods that estimate entropy using k-th nearest neighbours (kNN) have been applied to internal degrees of freedom in biomolecular simulations, and for the rigorous computation of positional-orientational entropy of one and two molecules. The mutual information expansion (MIE) and the maximum information spanning tree (MIST) methods were proposed and used to deal with a large number of non-independent degrees of freedom, providing estimates or bounds on the global entropy, thus complementing the kNN method. The application of the combination of such methods to solvent molecules appears problematic because of the indistinguishability of molecules and of their symmetric parts. All indistiguishable molecules span the same global conformational volume, making application of MIE and MIST methods difficult. Here, we address the problem of indistinguishability by relabeling water molecules in such a way that each water molecule spans only a local region throughout the simulation. Then, we work out approximations and show how to compute the single-molecule entropy for the system of relabeled molecules. The results suggest that relabeling water molecules is promising for computation of solvation entropy.

Advances in the study of the mechanochemical coupling of kinesin

2018 ◽  
Vol 32 (18) ◽  
pp. 1840001 ◽  
Author(s):  
Ming Li ◽  
Zhong-Can Ou-Yang ◽  
Yao-Gen Shu
Keyword(s):  
Molecular Dynamics ◽  
Single Molecule ◽  
Intracellular Transport ◽  
Coordination Mechanism ◽  
Personal Perspective ◽  
Long Distance ◽  
Future Studies ◽  
Mechanochemical Coupling ◽  
Dynamics Simulations ◽  
Made In

Kinesin is a two-headed linear motor for intracellular transport. It can walk a long distance in a hand-over-hand manner along the track before detaching (i.e., high processivity), and it consumes one ATP molecule for each step (i.e., tight mechanochemical coupling). The mechanisms of the coordination of its two heads and the mechanochemical coupling are the central issues of numerous researches. A few advances have been made in recent decades, thanks to the development of single-molecule technologies and molecular dynamics simulations. In this paper, we review some progress of the studies on the kinematics, energetics, coordination mechanism, mechanochemical mechanism of kinesin. We also present a personal perspective on the future studies of kinesin.

scholarly journals Molecular Dynamics Study of Ion Transport in Polymer Electrolytes of All-Solid-State Li-Ion Batteries

Micromachines ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1012
Author(s):  
Takuya Mabuchi ◽  
Koki Nakajima ◽  
Takashi Tokumasu
Keyword(s):  
Molecular Dynamics ◽  
Solid State ◽  
Ion Transport ◽  
Polyethylene Oxide ◽  
Polymer Electrolytes ◽  
Li Ion Batteries ◽  
Transport Mechanisms ◽  
Li Ion ◽  
Dynamics Simulations ◽  
The Relationship

Atomistic analysis of the ion transport in polymer electrolytes for all-solid-state Li-ion batteries was performed using molecular dynamics simulations to investigate the relationship between Li-ion transport and polymer morphology. Polyethylene oxide (PEO) and poly(diethylene oxide-alt-oxymethylene), P(2EO-MO), were used as the electrolyte materials, and the effects of salt concentrations and polymer types on the ion transport properties were explored. The size and number of LiTFSI clusters were found to increase with increasing salt concentrations, leading to a decrease in ion diffusivity at high salt concentrations. The Li-ion transport mechanisms were further analyzed by calculating the inter/intra-hopping rate and distance at various ion concentrations in PEO and P(2EO-MO) polymers. While the balance between the rate and distance of inter-hopping was comparable for both PEO and P(2EO-MO), the intra-hopping rate and distance were found to be higher in PEO than in P(2EO-MO), leading to a higher diffusivity in PEO. The results of this study provide insights into the correlation between the nanoscopic structures of ion solvation and the dynamics of Li-ion transport in polymer electrolytes.

scholarly journals Planar Boronic Graphene and Nitrogenized Graphene Heterostructure for Protein Stretch and Confinement

Biomolecules ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1756
Author(s):  
Xuchang Su ◽  
Zhi He ◽  
Lijun Meng ◽  
Hong Liang ◽  
Ruhong Zhou
Keyword(s):  
Single Molecule ◽  
Intrinsically Disordered Proteins ◽  
Electron Tunneling ◽  
Amyloid Β ◽  
Protein Sequencing ◽  
Disordered Proteins ◽  
Force Microscopy ◽  
Intrinsically Disordered ◽  
Atomic Force ◽  
Dynamics Simulations

Single-molecule techniques such as electron tunneling and atomic force microscopy have attracted growing interests in protein sequencing. For these methods, it is critical to refine and stabilize the protein sample to a “suitable mode” before applying a high-fidelity measurement. Here, we show that a planar heterostructure comprising boronic graphene (BC3) and nitrogenized graphene (C3N) sandwiched stripe (BC3/C3N/BC3) is capable of the effective stretching and confinement of three types of intrinsically disordered proteins (IDPs), including amyloid-β (1–42), polyglutamine (Q42), and α-Synuclein (61–95). Our molecular dynamics simulations demonstrate that the protein molecules interact more strongly with the C3N stripe than the BC3 one, which leads to their capture, elongation, and confinement along the center C3N stripe of the heterostructure. The conformational fluctuations of IDPs are substantially reduced after being stretched. This design may serve as a platform for single-molecule protein analysis with reduced thermal noise.

scholarly journals Rational design of protein-specific folding modifiers

2020 ◽  
Author(s):  
Anirban Das ◽  
Anju Yadav ◽  
Mona Gupta ◽  
R Purushotham ◽  
Vishram L. Terse ◽  
...  
Keyword(s):  
Single Molecule ◽  
Rational Design ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Force Measurements ◽  
Folding Nucleus ◽  
Dynamics Simulations ◽  
General Method

AbstractProtein folding can go wrong in vivo and in vitro, with significant consequences for the living cell and the pharmaceutical industry, respectively. Here we propose a general design principle for constructing small peptide-based protein-specific folding modifiers. We construct a ‘xenonucleus’, which is a pre-folded peptide that resembles the folding nucleus of a protein, and demonstrate its activity on the folding of ubiquitin. Using stopped-flow kinetics, NMR spectroscopy, Förster Resonance Energy transfer, single-molecule force measurements, and molecular dynamics simulations, we show that the ubiquitin xenonucleus can act as an effective decoy for the native folding nucleus. It can make the refolding faster by 33 ± 5% at 3 M GdnHCl. In principle, our approach provides a general method for constructing specific, genetically encodable, folding modifiers for any protein which has a well-defined contiguous folding nucleus.

Sign in / Sign up

Export Citation Format

Share Document