scholarly journals Assessment of optimum energy demand for non-centrifugal sugar production through an alternate process

2019 ◽  
Vol 1276 ◽  
pp. 012079
Author(s):  
Morapakala Srinvas ◽  
Sunkara Prudhvi Raj ◽  
Louis F Marie ◽  
K S Reddy ◽  
Tadhg S O’Donovan
Keyword(s):  
Energy Demand ◽  
Sugar Production ◽  
Optimum Energy

Wind energy and the historic environment: A business-driven symbiosis approach

2021 ◽  
pp. 0958305X2110148
Author(s):  
George A Xydis ◽  
Katerina Kremastioti ◽  
Maria Panagiotidou
Keyword(s):  
Energy Efficiency ◽  
Wind Energy ◽  
Heat Pump ◽  
Energy Demand ◽  
Energy Savings ◽  
Model Building ◽  
Electricity Consumption ◽  
Historic Buildings ◽  
Building Stock ◽  
Optimum Energy

The present study discusses alternative ways of achieving optimum energy efficiency for historic buildings in areas where sustainable energy projects are planned. About 25% of Europe’s building stock was constructed before the mid-20th century and despite EU’s strenuous efforts for the protection and conservation of historic buildings and complexes, achieving energy efficiency with the minimum or preferably no intervention remains as a requirement. The settlement of Monemvasia, has been selected as our case study. A model building was chosen, its special characteristics are presented, and four solutions to the energy efficiency upgrade of the building were tested: (a) the application of internal insulation, (b) a heat pump installation, (c) the application of roof insulation, and (d) the replacement of the internal doorframes. The four scenarios were simulated via the TEE-KENAK software and the percentage of the annual energy saved through the application of each one of the mentioned measures was estimated. The results proved that installing a heat pump and internal insulation would maximise energy savings. Coupling the energy demand of the settlement in correlation with a wind energy project in the wider area, and the available curtailment was explored. The results showed that if 300 houses decide on acquiring their electricity consumption from the local wind independent power producer, at a price of EUR 35/MWh, the possible profit from the market could reach EUR100,000 per year. Such a business-driven concept could be extrapolated and evolve into a holistic wind energy and historic environment symbiosis setting.

scholarly journals Kinematic study of reducing sugar production from rice straw by raw wood-rotting enzyme strain

2014 ◽  
Vol 28 (1) ◽  
pp. 32-35
Author(s):  
Pradip Saha ◽  
Shamima Yesmin Sony ◽  
Sraboni Mazumder ◽  
Tanmoy Kanti Deb ◽  
Maksudur Rahman Khan ◽  
...  
Keyword(s):  
Rice Straw ◽  
Energy Demand ◽  
Chemical Engineering ◽  
Theoretical Data ◽  
Cost Effective ◽  
Reducing Sugar ◽  
Mean Deviation ◽  
Sugar Production ◽  
Maximum Production ◽  
Samanea Saman

In this study, a cost effective, simple, environment friendly way of fermentable reducing sugar production from rice straw has been carried out by using naturally grown raw wood rotting enzyme. The rotten bark of three trees was collected as the source of enzyme, called enzyme strain. The yield of reducing sugar from rice straw by enzyme strain at various operating condition was studied. A kinetic model expression has been developed for the enzymatic hydrolysis process based on the Michaelis – Mentens approach. Comparison between the experimental data and theoretical data predicted from the rate model render sound accord with a mean deviation of about 0.679. Strain collected from the Rain tree (Samanea Saman) showed the maximum production of reducing sugar. The absence of light gives 36.36% higher production than that of the presence of light. The optimum pH is found as 5. Strain concentration at 0.0233g/ml shows the maximum sugar production as 0.09854 mg/ml in 10 days. Substrate concentration at .0143mg/ml gives maximum production of 0 .15991 mg/ml in 16 days. From this study the optimum condition was found as 0.157 mg/ml fermentable reducing sugar in 11 days. This study provides an alternative and attractive cost effective source of fermentable sugar which can be further converted to valuable product such as bio-ethanol to meet the worlds increasing energy demand. DOI: http://dx.doi.org/10.3329/jce.v28i1.18108 Journal of Chemical Engineering, Vol. 28, No. 1, December 2013: 32-35

scholarly journals Parametric Study on Determining Optimum Shading Techniques for Urban High-Rise Dwellings

Urban Science ◽  
2019 ◽  
Vol 3 (3) ◽  
pp. 85
Author(s):  
Shorouk Omar Elshiwihy ◽  
Hassam Nasarullah Chaudhry
Keyword(s):  
Energy Consumption ◽  
Parametric Study ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Building Design ◽  
Sustainable Building ◽  
High Rise ◽  
Optimum Energy ◽  
Computational Fluid Dynamics Cfd ◽  
Shading Devices

Shading techniques constitute one of the most passive, beneficial strategies for reducing energy consumption in urban dwellings. Shading affects many factors, for example, the solar gains and radiations falling on the façade, which are considered the most significant in increasing the cooling energy demand in hot climates. This paper conducts a parametric study on external and internal shading devices and establishes their impact on energy consumption, daylight levels, and ventilation. The work was conducted using Integrated Environmental Simulation Virtual Environment (IES-VE) and Computational Fluid Dynamics (CFD) numerical methods. The results revealed that optimised shading can influence savings in terms of energy and cooling, in addition to the enhancement of daylighting and reduction of glare. After studying all these factors associated with the different shading techniques investigated, the findings revealed that all shades affect the energy, daylight and ventilation parameters positively. However, despite all external and internal shadings showing improvements, the egg crate shade was determined as that which provided the optimum energy saving, while enhancing daylight and improving natural ventilation for a sustainable building design.

A novel ligand with –NH2 and –COOH-decorated Co/Fe-based oxide for an efficient overall water splitting: dual modulation roles of active sites and local electronic structure

2020 ◽  
Vol 10 (18) ◽  
pp. 6266-6273
Author(s):  
Yalan Zhang ◽  
Zebin Yu ◽  
Ronghua Jiang ◽  
Jung Huang ◽  
Yanping Hou ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Water Splitting ◽  
Energy Demand ◽  
Active Sites ◽  
Electrode Materials ◽  
Global Energy ◽  
Overall Water Splitting ◽  
Local Electronic Structure ◽  
Electrochemical Water Splitting

Excellent electrochemical water splitting with remarkable durability can provide a solution to satisfy the increasing global energy demand in which the electrode materials play an important role.

Fuzzy multi-objective decision making approach for nuclear power plant installation

2020 ◽  
Vol 39 (5) ◽  
pp. 6339-6350
Author(s):  
Esra Çakır ◽  
Ziya Ulukan
Keyword(s):  
Linear Programming ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Energy Supply ◽  
Energy Demand ◽  
Nuclear Power ◽  
Power Plants ◽  
Total Duration ◽  
Objective Functions ◽  
Multi Objective

Due to the increase in energy demand, many countries suffer from energy poverty because of insufficient and expensive energy supply. Plans to use alternative power like nuclear power for electricity generation are being revived among developing countries. Decisions for installation of power plants need to be based on careful assessment of future energy supply and demand, economic and financial implications and requirements for technology transfer. Since the problem involves many vague parameters, a fuzzy model should be an appropriate approach for dealing with this problem. This study develops a Fuzzy Multi-Objective Linear Programming (FMOLP) model for solving the nuclear power plant installation problem in fuzzy environment. FMOLP approach is recommended for cases where the objective functions are imprecise and can only be stated within a certain threshold level. The proposed model attempts to minimize total duration time, total cost and maximize the total crash time of the installation project. By using FMOLP, the weighted additive technique can also be applied in order to transform the model into Fuzzy Multiple Weighted-Objective Linear Programming (FMWOLP) to control the objective values such that all decision makers target on each criterion can be met. The optimum solution with the achievement level for both of the models (FMOLP and FMWOLP) are compared with each other. FMWOLP results in better performance as the overall degree of satisfaction depends on the weight given to the objective functions. A numerical example demonstrates the feasibility of applying the proposed models to nuclear power plant installation problem.

Biodiesel production from non-edible oils: A review

2020 ◽  
pp. 149-159
Author(s):  
Jatinder Kataria ◽  
Saroj Kumar Mohapatra ◽  
Amit Pal
Keyword(s):  
Environmental Impact ◽  
Energy Demand ◽  
Fossil Fuels ◽  
World Wide ◽  
Edible Oils ◽  
Control Measure ◽  
Biodiesel Production ◽  
Pollution Level ◽  
Animal Fats ◽  
The World

The limited fossil reserves, spiraling price and environmental impact due to usage of fossil fuels leads the world wide researchers’ interest in using alternative renewable and environment safe fuels that can meet the energy demand. Biodiesel is an emerging renewable alternative fuel to conventional diesel which can be produced from both edible and non-edible oils, animal fats, algae etc. The society is in dire need of using renewable fuels as an immediate control measure to mitigate the pollution level. In this work an attempt is made to review the requisite and access the capability of the biodiesel in improving the environmental degradation.

Direct ammonia fueled solid oxide fuel cells: A comprehensive review on challenges, opportunities and future outlooks

2020 ◽  
pp. 70-91 ◽  
Author(s):  
Molla Asmare ◽  
Mustafa Ilbas
Keyword(s):  
Electric Power ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Clean Energy ◽  
Performance Comparison ◽  
Optimum Operating ◽  
Practical Implementation ◽  
Human Society ◽  
Energy Access ◽  
Green Fuel

Nowadays, the most decisive challenges we are fronting are perfectly clean energy making for equitable and sustainable modern energy access, and battling the emerging alteration of the climate. This is because, carbon-rich fuels are the fundamental supply of utilized energy for strengthening human society, and it will be sustained in the near future. In connection with this, electrochemical technologies are an emerging and domineering tool for efficiently transforming the existing scarce fossil fuels and renewable energy sources into electric power with a trivial environmental impact. Compared with conventional power generation technologies, SOFC that operate at high temperature is emerging as a frontrunner to convert the fuels chemical energy into electric power and permits the deployment of varieties of fuels with negligible ecological destructions. According to this critical review, direct ammonia is obtained as a primary possible choice and price-effective green fuel for T-SOFCs. This is because T-SOFCs have higher volumetric power density, mechanically stable, and high thermal shocking resistance. Also, there is no sealing issue problem which is the chronic issues of the planar one. As a result, the toxicity of ammonia to use as a fuel is minimized if there may be a leakage during operation. It is portable and manageable that can be work everywhere when there is energy demand. Besides, manufacturing, onboard hydrogen deposition, and transportation infrastructure connected snags of hydrogen will be solved using ammonia. Ammonia is a low-priced carbon-neutral source of energy and has more stored volumetric energy compared with hydrogen. Yet, to utilize direct NH3 as a means of hydrogen carrier and an alternative green fuel in T-SOFCs practically determining the optimum operating temperatures, reactant flow rates, electrode porosities, pressure, the position of the anode, thickness and diameters of the tube are still requiring further improvement. Therefore, mathematical modeling ought to be developed to determine these parameters before planning for experimental work. Also, a performance comparison of AS, ES, and CS- T-SOFC powered with direct NH3 will be investigated and best-performed support will be carefully chosen for practical implementation and an experimental study will be conducted for verification based on optimum parameter values obtained from numerical modeling.

BP Global Energy Outlook 2030

2013 ◽  
pp. 109-128 ◽  
Author(s):  
C. Rühl
Keyword(s):  
Emerging Economies ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Net Energy ◽  
Global Energy ◽  
The Past ◽  
Market Shares ◽  
The Us ◽  
Almost All ◽  
Oil Gas

This paper presents the highlights of the third annual edition of the BP Energy Outlook, which sets out BP’s view of the most likely developments in global energy markets to 2030, based on up-to-date analysis and taking into account developments of the past year. The Outlook’s overall expectation for growth in global energy demand is to be 36% higher in 2030 than in 2011 and almost all the growth coming from emerging economies. It also reflects shifting expectations of the pattern of supply, with unconventional sources — shale gas and tight oil together with heavy oil and biofuels — playing an increasingly important role and, in particular, transforming the energy balance of the US. While the fuel mix is evolving, fossil fuels will continue to be dominant. Oil, gas and coal are expected to converge on market shares of around 26—28% each by 2030, and non-fossil fuels — nuclear, hydro and renewables — on a share of around 6—7% each. By 2030, increasing production and moderating demand will result in the US being 99% self-sufficient in net energy. Meanwhile, with continuing steep economic growth, major emerging economies such as China and India will become increasingly reliant on energy imports. These shifts will have major impacts on trade balances.

Oil Prices: Limits to Growth and the Depth of Falling

2006 ◽  
pp. 28-41 ◽  
Author(s):  
I. Bashmakov
Keyword(s):  
Energy Demand ◽  
Negative Relationship ◽  
Oil Prices ◽  
Production Factor ◽  
Energy Costs ◽  
Purchasing Power ◽  
Limits To Growth ◽  
Technological Basis ◽  
Production Factors ◽  
Output Ratio

This article deals with the determination of future oil prices. The approach used is based on the evaluation of purchasing power limits and allows to put the limits to monopolistic price setting. Several important findings are formulated: going beyond the upper thresholds of purchasing power stipulates negative relationship between energy costs and GDP growth rates, and this brings the dynamics to energy demand to price elasticity. This approach is also based on what the author calls the economics of constants and variables, i.e. on the existence of very stable macroeconomic proportions, which may be observed throughout the whole period of statistical observations (over 200 years). It provides grounds for two conclusions. First, the upper limit of energy costs to the gross output ratio is determined by the least acceptable profitability. Second, the theoretical postulate on substantial production factors substitution used in the production functions theory may be incorrect. In reality, the change of the economy technological basis leads to the substitution of low quality production factor by the same factor with a higher quality. Application of this approach brings the basis for predicting oil prices for 2006-2008.

Sign in / Sign up

Export Citation Format

Share Document