scholarly journals Physico-chemical exploration of Yam Flour (Dioscorea alata L.) as a raw material for processed cookies

2021 ◽  
Vol 1968 (1) ◽  
pp. 012004
Author(s):  
A Yalindua ◽  
N Manampiring ◽  
F Waworuntu ◽  
F Y Yalindua
Food Biology ◽  
1970 ◽  
pp. 19-23
Author(s):  
Nawal Abdel-Gayoum Abdel-Rahman

The aim of this study is to use of karkede (Hibiscus sabdariffa L.) byproduct as raw material to make ketchup instead of tomato. Ketchup is making of various pulps, but the best type made from tomatoes. Roselle having adequate amounts of macro and micro elements, and it is rich in source of anthocyanine. The ketchup made from pulped of waste of soaked karkede, and homogenized with starch, salt, sugar, ginger (Zingiber officinale), kusbara (Coriandrum sativum) and gum Arabic. Then processed and filled in glass bottles and stored at two different temperatures, ambient and refrigeration. The total solids, total soluble solids, pH, ash, total titratable acidity and vitamin C of ketchup were determined. As well as, total sugars, reducing sugars, colour density, and sodium chloride percentage were evaluated. The sensory quality of developed product was determined immediately and after processing, which included colour, taste, odour, consistency and overall acceptability. The suitability during storage included microbial growth, physico-chemical properties and sensory quality. The karkede ketchup was found free of contaminants throughout storage period at both storage temperatures. Physico-chemical properties were found to be significantly differences at p?0.05 level during storage. There were no differences between karkade ketchup and market tomato ketchup concerning odour, taste, odour, consistency and overall acceptability. These results are encouraging for use of roselle cycle as a raw material to make acceptable karkade ketchup.


2019 ◽  
Vol 777 (12) ◽  
pp. 37-42
Author(s):  
G.Yu. SHAGIGALIN ◽  
◽  
P.A. FEDOROV ◽  
L.N. LOMAKINA ◽  
◽  
...  

2007 ◽  
Vol 13 (6) ◽  
pp. 485-495 ◽  
Author(s):  
M.R. Ramirez ◽  
R. Cava

The effect of raw material characteristics (longissimus dorsi and biceps femoris) on dry-cured loin and ham quality from three different Iberian · Duroc genotypes was studied: GEN1: ♂ Iberian · ♀ Duroc1, GEN2: ♂ Duroc1 · ♀ Iberian; GEN3: ♂ Duroc2 · ♀ Iberian. GEN1 and GEN2 are reciprocal crosses, while the difference between GEN2 and GEN3 is the Duroc sire line. The line Duroc1 (DU1) was selected for the manufacture of dry-cured meat products, whereas the line Duroc2 (DU2) was selected for meat production with low carcass fat. Raw material and dry-cured meat products did not differ between reciprocal crosses (GEN1 vs. GEN2). However, the genotype of the Duroc sire line affected the quality of meat and dry-cured meat products. GEN1 and GEN2 had higher adipogenic nature and higher postmortem pH than GEN3, and as a result, these dry-cured meat products had better instrumental and sensory quality than those from GEN3. By contrast, meat from GEN3 had lower pH, fat content, and oxidative stability which decreased the quality of dry-cured meat products. Therefore, there was a close connection between raw material and dry-cured meat products quality as it was affected by characteristics related to the genotype such as the adipogenic character and meat quality traits associated with pH.


Agronomy ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1642
Author(s):  
Diego Salazar ◽  
Mirari Arancibia ◽  
Diego R. Silva ◽  
María Elvira López-Caballero ◽  
María Pilar Montero

The aim of this study was to determine the potential of Andean Crop Flours (ACF) to develop muffins suitable for people with celiac disease or gluten intolerance, as these flours do not contain gluten in their composition. The physico-chemical, rheological, microbiological and sensory properties of muffins from different blends of the following ACF were evaluated: camote (Ipomea batatas), oca (Oxalis tuberosa), achira (Canna indica) and mashua (Tropaeolum tuberosum), formulated with sucrose or sucralose. Wheat muffins with sucrose were used for control purposes. The effect of 5-day storage on color, texture and microbiology was also studied. The use of ACF sharply increased the amount of total dietary fiber, while fat and protein contents were slightly lower with respect to the control. Regarding color, formulations with ACF resulted in darker products, showing an important decrease in L* and b* values while a* increased in all ACF formulations. According to their rheological properties, all doughs showed an unstructured and viscous behavior, and the mixture of camote, achira and mashua with sugar was very similar to wheat muffin. On textural parameters, there was an increasing (p < 0.0) effect on firmness and chewiness noticeable on day 5 in all samples. The resultant muffins were considered safe products due to low counts of total microorganisms, molds and yeasts and the absence of Enterobacteria and Staphylococcus aureus during storage. Muffins with ACF showed good overall acceptability, especially muffins containing sucralose, which obtained the highest score. This study showed that ACF could be used as an alternative raw material in the preparation of gluten-free muffins with good nutritional quality, thus providing a useful alternative for underused crops.


2020 ◽  
Vol 36 (6) ◽  
Author(s):  
Bruna Samara dos Santos Rekowsky ◽  
Géssica Cordeiro de Araújo ◽  
Nelson de Carvalho Delfino ◽  
Marion Pereira da Costa ◽  
Thadeu Mariniello Silva

Buffalo milk presents higher proteins and lipids concentration than cow milk, which provides a better yield in cheese-making production and products with considerable sensory approval. However, buffalo milk is not regularly available throughout the year due to different handling conditions. Thus, to guarantee the supply of buffalo milk dairy products during the year, the addition of bovine milk is an alternative. Therefore, this study aimed to test the effect of a buffalo and bovine milk mixture for the Minas Frescal cheese elaboration by physico-chemical, sensory analysis and obtaining yield. The raw material was analysed for the parameters of acidity, density, fat, total solids and solid-not-fat. There were 3 Minas Frescal cheeses elaborated from 3 formulations: 100% buffalo milk, 100% bovine milk and the mixture of 50% of each milk. The cheeses were submitted to the Gravimetric and Gerber methods to obtain values of moisture and fat, as well as to obtain, indirectly, fat in dry matter. For bovine and buffalo milk, the parameters evaluated (acidity, density, fat, total solids and solids-not-fat) complied with Brazilian legislation and parameters described in the literature. For the bovine, mixed and buffalo fresh cheeses, values were obtained, respectively, for moisture (74.04, 60.93 and 63.61), fat in dry matter (44.35, 42.23 and 46.03) and cheese yield (27, 20.8 and 24.2), indicating a higher yield for the bovine Minas Frescal cheese and higher fat content for the buffalo cheese. The overall acceptance of the mixed Minas Frescal cheese was significantly superior to the bovine and buffalo cheese. The parameters of colour, appearance, texture, flavour and overall acceptance were above 8 points in the hedonic scale (‘moderately liked’ to ‘extremely liked’), and the aroma attribute scored was above 7 (‘I enjoyed regularly’ to ‘moderately liked’). Therefore, the elaboration of Minas Frescal cheese from the mixture of 2 matrices (buffalo and bovine milk) demonstrated technological viability with the potential to meet the demands of the consumer market.


2020 ◽  
Vol 8 (11) ◽  
pp. 245-253
Author(s):  
Meena R.P. ◽  
◽  
Khan Asim Ali ◽  
Subhani S ◽  
Mustehasan a ◽  
...  

Corona virus disease 2019 (COVID-19) is threatening the worldwide population by causing symptoms like fever, cough, shortness of breathand tirednessetc.A huge population of world is suffering from this disease and no specific vaccine for this pandemic disease has been developed. According to the guidelines of Ministry of AYUSH, this disease can be prevented by taking immunity boosters, as immune system plays a vital role in defence against any disease. In Unani system of medicines, many drugs of plant origin are mentioned in classical literature for strengthening and increasing the immunity of humans. Darchini is one of the potent immune boosters and it is believed that consumption of Darchini decoction with honey strengthens the immune system.The Ministry of AYUSH, Govt. of India in its Advisory has considered Darchini as one of the important ingredient of AYUSH Joshanda/ Kwath/ Kudineer.Since, the drug Darchini is being given to COVID-19 patients as prophylaxis regime, it has become necessary to authenticate and develop its pharmacopoeial standards so that quality raw material can be provided to needy mass. The present study is aimed to develop identity, purity and strength of drug using pharmacognostical, physico-chemical and quality control methods.


2021 ◽  
Vol 46 (1) ◽  
Author(s):  
A.M. Hashimi

Ethanol (C2H5OH) is a primary alcohol which can be produced by fermentation, using any of the sources of carbohydrates such as sugarcane, cassava, grains and yam tubers among others. Production of ethanol fermented from renewable sources for fuel and fuel additives are known as bioethanol. Since the need of bioethanol is increasing, the production of bioethanol must be increased using cheaper and eco friendly raw materials. This study was conducted, using cheaper and eco friendly raw materials; water yam (Dioscorea alata) as alternative sources for ethanol production. The starch that was produced from water yam was hydrolysed into fermentable sugar, using acid hydrolysis. The fermentable sugar was converted into ethanol by fermentation process at pH 4.5 using fermenting brewer's yeast (Saccharomyces calsbergensis). Starch, glucose and ethanol which were obtained were analysed for physicochemical properties. Findings revealed that the starch sample obtained gave a blue-black colouration on addition of few drops of iodine solution. This confirmed that the carbohydrate content was mainly starch. On calculation of viability, findings further showed that water yam is a good raw material for production of ethanol, therefore indigenous production of ethanol obtained from water yam is economically viable and recommended. This will save the country from lot of money spends annually on the importation of ethanol and it can also provide job opportunity for many wandering and unemployed Nigerians.


2019 ◽  
pp. 658-687 ◽  
Author(s):  
R. V. Ralegaonkar ◽  
M. V. Madurwar ◽  
V. V. Sakhare

Due to ever increasing demand for the conventional construction materials as well as an increase in agro-industrial by-products it is essential to reuse these materials. As a smart city solution this chapter briefs an overview for the application of alternate raw materials as a principal source for the development of sustainable construction materials. The potential application of the discussed raw materials is elaborated as cementitious material, the aggregates as well as alternative reinforcement material. To understand the process of application, sustainable masonry product development is discussed in detail. In order to evaluate the feasibility of the raw material, the necessary physico-chemical test evaluation methods are also briefed. The developed end product performance evaluation is also discussed by desired tests as recommended by standards. The chapter concludes with a positive note that reuse of agro-industrial by-products is a feasible solution for the smart city development.


2018 ◽  
Vol 36 (4) ◽  
pp. 521-525 ◽  
Author(s):  
Luis Eduardo de Moura ◽  
Adelmo Golynski

ABSTRACT The authors evaluated critical points of production stages of the industrial tomato, through physical and physico-chemical analyzes of U2006 hybrid fruits in the harvest, 2016. Fruits were evaluated in relation to raw material, temperature, fresh mass, pH, soluble solids (°Brix), firmness, titratable acidity and extravasation of electrolytes. Samples were collected in six steps: manual, mechanized, truck, arrival at industry, unloading and selection mat in two periods, morning and afternoon, totalizing 60 fruits for each step, and four replications. Fruits which waited for more than 10 hours in the yard generated an increase in serious defects (%), loss of fresh mass, discount on the amount paid for the load. The most critical stages of the production process were identified when tomatoes arrived at the industry and their unloading, when the fruits presented fresh mass loss due to the high temperature. In addition, the authors highlight that a better organization in the arrivals at the industry as well as an efficient communication of crop restriction is crucial, since unscheduled stops increase waiting time, causing significant quality losses.


Holzforschung ◽  
1999 ◽  
Vol 53 (6) ◽  
pp. 590-596 ◽  
Author(s):  
Xue-Jun Pan ◽  
Yoshihiro Sano

Summary Acetic acid lignins from rice straw (RLs), birch (BL) and fir (FL) were chemically characterized by means of elementary analysis, functional groups analysis, alkaline nitrobenzene and permanganate oxidation, Mannich reactivity and other techniques. The results showed that RLs had higher contents of residual polysaccharide and protein, and remarkably fewer acetyl groups than BL and FL. Results of nitrobenzene and permanganate oxidation indicated that RLs were remarkably more condensed than the native lignin in rice straw. In addition, the results of Mannich reactivity showed that RLs were more reactive toward modification than BL and FL, and might be a good raw material for lignin derivatives, such as lignin adhesives and chelating resins.


Sign in / Sign up

Export Citation Format

Share Document