scholarly journals UTILIZATION OF WATER YAM (Dioscorea alata) AS A SOURCE OF ETHANOL

2021 ◽  
Vol 46 (1) ◽  
Author(s):  
A.M. Hashimi
Keyword(s):  
Raw Materials ◽  
Primary Alcohol ◽  
Raw Material ◽  
Dioscorea Alata ◽  
Fermentable Sugar ◽  
Iodine Solution ◽  
Indigenous Production ◽  
Job Opportunity ◽  
Alternative Sources ◽  
Water Yam

Ethanol (C2H5OH) is a primary alcohol which can be produced by fermentation, using any of the sources of carbohydrates such as sugarcane, cassava, grains and yam tubers among others. Production of ethanol fermented from renewable sources for fuel and fuel additives are known as bioethanol. Since the need of bioethanol is increasing, the production of bioethanol must be increased using cheaper and eco friendly raw materials. This study was conducted, using cheaper and eco friendly raw materials; water yam (Dioscorea alata) as alternative sources for ethanol production. The starch that was produced from water yam was hydrolysed into fermentable sugar, using acid hydrolysis. The fermentable sugar was converted into ethanol by fermentation process at pH 4.5 using fermenting brewer's yeast (Saccharomyces calsbergensis). Starch, glucose and ethanol which were obtained were analysed for physicochemical properties. Findings revealed that the starch sample obtained gave a blue-black colouration on addition of few drops of iodine solution. This confirmed that the carbohydrate content was mainly starch. On calculation of viability, findings further showed that water yam is a good raw material for production of ethanol, therefore indigenous production of ethanol obtained from water yam is economically viable and recommended. This will save the country from lot of money spends annually on the importation of ethanol and it can also provide job opportunity for many wandering and unemployed Nigerians.

Input Cost Adjustments and WTO Anti-Dumping Law: A Closer Look at the EU Practice

2018 ◽  
Vol 18 (1) ◽  
pp. 81-107 ◽  
Author(s):  
SHERZOD SHADIKHODJAEV
Keyword(s):  
Raw Materials ◽  
Export Price ◽  
Production Costs ◽  
Raw Material ◽  
Normal Value ◽  
The Government ◽  
Alternative Sources ◽  
The One ◽  
The Cost ◽  
The Eu

AbstractIn anti-dumping procedures, the EU authorities have adjusted State-distorted input costs in the constructed normal value to market benchmarks. This methodology increases the amount of anti-dumping duties and hence import barriers to foreign goods produced with low-priced raw materials. Such cost adjustments are based on certain EU anti-dumping provisions that implement corresponding World Trade Organization (WTO) rules under which the cost of input must be derived, as a principle, from the records of target companies in the exporting country if those records, inter alia, reasonably reflect production costs of the product under investigation. But in the case of input costs distorted by the government, the EU authorities have typically deviated from this principle relying on alternative sources on the grounds of unreasonable costs. While the EU jurisprudence has so far been generally lenient towards this methodology as applied to significant distortions in the raw material (upstream) market, the recent WTO appellate ruling in EU–Biodiesel is rather negative on its use in the presence of the valid domestic records. This article examines the EU anti-dumping practice as reviewed in both EU and WTO judicial proceedings and discusses some legislative reforming options under both regimes. It concludes that the WTO anti-dumping rules should be amended to allow market-oriented cost adjustments in the normal value, on the one hand, and ensure parallel export price adjustments, on the other.

PERSPECTIVE DEVELOPMENT OF WORLD PRODUCTION OF FEEDS FOR AQUACULTURE: ALTERNATIVE SOURCES OF RAW MATERIALS

2017 ◽  
pp. 67-78
Author(s):  
Lina Yurievna Lagutkina
Keyword(s):  
Raw Materials ◽  
Limiting Factors ◽  
Current Status ◽  
Feed Production ◽  
The World ◽  
Market Trends ◽  
Alternative Sources ◽  
World Industry ◽  
First Time ◽  
A Current

The author of the article discloses the prospects of development of the world feed production for aquaculture based on the analysis of key innovative technological and market trends. The author specifies that shortage, high cost, low ecological compatibility of traditional raw materials - fish flour - are among major limiting factors in the development of production of feeds for aquaculture. This fact, in turn, limits sustainable development of aquaculture both in Russia, and in the world in general. The article presents the overview of a current status of the world industry of feed production in aquaculture, where the regional situation is studied, as well. For the first time, there is given the outlook of innovative technologies in feed production based on the alternative sources of protein (on the example of projects of leading aquabiotechnological companies) which will determine industry’s objectives for the mid-term perspective.

RHEOLOGICAL PROPERTIES OF CERAMIC MASSES: IMPROVEMENT BY COMPLEX MATERIAL ACTIVATION

2019 ◽  
Vol 16 (3) ◽  
pp. 334-351
Author(s):  
A. S. Mavlyanov ◽  
E. K. Sardarbekova
Keyword(s):  
Rheological Properties ◽  
Raw Materials ◽  
Sensitivity Coefficient ◽  
Raw Material ◽  
Clay Material ◽  
Fibrous Materials ◽  
Chemical Production ◽  
Production Wastes ◽  
Pass Through ◽  
The Masses

Introduction. The objective of the research is to study the effect of the complex activation of the alumina raw material on the rheological properties of the ceramic mass. In addition, the authors investigate solutions for the application of optimal coagulation structures based on loams and ash together with plastic certificates.Materials and methods. The authors used the local forest like reserves of clay loams at the BashKarasu, ash fields of the Bishkek Central Heating Centre (BTEC) and plasticizer (sodium naphthenate obtained from alkaline chemical production wastes) as fibrous materials. Moreover, the authors defined technological properties of raw materials within standard laboratory methodology in accordance with current GOSTs.Results. The researchers tested plastic durability on variously prepared masses for the choice of optimal structures. The paper demonstrated the plastic durability of complexly activated compounds comparing with non-activated and mechanically activated compounds. The sensitivity coefficient increased the amount of clay loams by mechanically and complexly activated, which predetermined the possibility of intensifying the process of drying samples based on complexly activated masses.Discussion and conclusions. However, mechanical activation of clay material reduces the period of relaxation and increases the elasticity coefficient of ceramic masses by 1.8–3.4 times, meanwhile decreases elasticity, viscosity and the conventional power during molding, which generally worsens the molding properties of the masses. Сomplex activation of ash-clay material decreases the period of relaxation and provides an increase in elasticity, plasticity of ceramic masses by 46–47%, reduction in viscosity by 1.5–2 times, conventional power on molding by 37–122% in comparison with MA clay loams. Ceramic masses based on spacecraft alumina raw materials belong to the SMT with improved rheological properties; products based on them pass through the mouthpiece for 5–7 seconds.

ANALYSIS FOR POTENCY AND PRODUCTION OF GRANULE ORGANIC FERTILIZER BASED ON MANURE

2018 ◽  
Vol 7 (2) ◽  
Author(s):  
Firman L. Sahwan
Keyword(s):  
Organic Material ◽  
Organic Materials ◽  
Raw Materials ◽  
Organic Fertilizer ◽  
Raw Material ◽  
Cow Manure ◽  
Production Potential ◽  
Natural Organic Material ◽  
Very High

Organic materials that are generally used as raw material for organic fertilizer granules (POG) is a natural organic material that has been degrade, smooth and dry. One of the main raw materials are always used with a very high percentage of usage, is manure. Manure potential in Indonesia is very high, amounting to 113.6 million tons per year, or 64.7 million tons per year to the island of Java. From this amount, it will be generated numbers POG production potential of 17.5 million tons per year (total Indonesia) or 9.9 million tons per year for the island of Java. While the realistic POG production predictions figures made from raw manure is 2.5 million tons annually, a figure that has been unable to meet the number requirement of POG greater than 4 million tons per year. Therefore, in producing POG, it should be to maximize the using of the potential of other organic materials so that the use of manure can be saved. With the use of a small amount of manure (maximum 30% for cow manure), it would be useful also to avoid the production of POG with high Fe content.keywods: organic material, manure, granule organic fertilizer

Nutritional Value Research of Spelt Pasta with Vegetable Additives

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 61-70
Author(s):  
Oliya Fazullina ◽  
Stanislav Smirnov
Keyword(s):  
Dietary Fiber ◽  
Nutritional Value ◽  
Raw Materials ◽  
Health Indicators ◽  
Dietary Treatment ◽  
Raw Material ◽  
Whole Wheat ◽  
Healthy Nutrition ◽  
Physiologically Active Substances ◽  
Simple Carbohydrates

Health indicators of the population depend significantly on the food quality and nutritional value. Simple carbohydrates excess of and lack of protein, dietary fiber, vitamins, minerals, antioxidants and other physiologically active substances increase the risk of socially significant disease progress. The development and production of mass-consumed products with high nutritional and biological value, including affordable non-traditional raw materials use, are promising areas of the food industry development aimed at improving the nutritional status of the population. The article presents the research results on the developed Noodle products recipes from non-traditional raw materials that meet modern healthy nutrition requirements, intended for dietary treatment and dietary prevention of people with overweight / obesity. The research aimed at expanding the range of macaroni products with these characteristics. As the main raw material, a man selected whole-wheat flour – new spelt flour, and as additional raw materials – buckwheat flour, broccoli and celery powders. The researchers found that the introduction of macaroni products from buckwheat spelt, broccoli and celery powders into the recipe had a multidirectional effect, reducing or increasing various indicators of its nutritional value. The changes range did not affect the overall characteristics. The satisfaction degree of the average daily need for food substances and energy when consuming a portion of 100 g for each sample of developed Noodle products allows them to be classified as functional products that are protein and dietary fiber sources, according to the requirements of the TR CU 022/2011.

UNIDO, Industrial Processing of Natural Resources. New York: United Nations. 1981. viii + 78pp.US $ 5.00. [United Nations Publication Sales No. E. 81. 11 . B.1]

1982 ◽  
Vol 21 (4) ◽  
pp. 329-333
Author(s):  
Rashid Aziz
Keyword(s):  
New York ◽  
United Nations ◽  
Industrial Development ◽  
Raw Materials ◽  
Developed Countries ◽  
Raw Material ◽  
Industrial Processing ◽  
Depth Study ◽  
Manufactured Exports ◽  
Year 2000

The book under review is a concise but fairly in-depth study of the prospects for export diversification from the Less Developed Countries (henceforth labeled as LDCs) particularly to Developed Countries (henceforth labeled as OCs). Given the multiple problems faced by the LOCs in exporting to the OCs - protectionist policies with regards to manufactured exports, volatility of prices obtained for raw material exports, etc. - the study analyses the potential for following an intermediate route. The important issues in the export of semi -processed and wholly processed raw materials are discussed. 111ese issues range from the problems and potentials for the location of processing facilities in the LOCs to the formulation of appropriate policies to encourage an export of processed goods rather than raw materials. Such policies will be useful both in solving the balance of-payments problems of the LDCs and in attaining the goal of the Lima Declaration and Plan of Action on Industrial Development and Co-operation, that called for 2S percent of world industrial production to be located in the LOCs by the year 2000.

PENGARUH HARGA DAN PEMAKAIAN PERSEDIAAN BAHAN BAKU TERHADAP VOLUME PRODUKSI PADA PT. KELOLA MINA LAUT DI GRESIK

MANAJERIAL ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 66
Author(s):  
BAYU YRI WIDHARTO
Keyword(s):  
Linear Regression ◽  
Hypothesis Testing ◽  
Multiple Linear Regression ◽  
Raw Materials ◽  
T Test ◽  
Raw Material ◽  
Analysis Tool ◽  
Production Volume ◽  
F Test ◽  
Material Price

The purpose of the research was to know the affect of many factors which affected to the production volume in PT. Kelola Mina Laut Gresik. What the price of raw materials was and the used of raw materials partially and simultan eously affected on the production volume. The analysis tool which used was a model of multiple linear regression. Hypothesis testing used t test and F test, both at the significant level 5%. Based of the analysis of research on PT Kelola Mina Laut Gresik. Partially, inventory raw material price had not significant effect on the production volume, consumption of raw material inventory affected significantly of the production volume. Inventory of raw material price and the use of raw material simultan eously affect significantly to the production volume.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

On the diagnostics of Adonis L. species (Ranunculaceae) of the Russian flora

2020 ◽  
pp. 3-14
Author(s):  
Aleksandr Luferov
Keyword(s):  
Raw Materials ◽  
Natural Populations ◽  
Structural Features ◽  
Biologically Active ◽  
Scientific Medicine ◽  
Diagnostic Features ◽  
Plant Raw Materials ◽  
Similar Chemical ◽  
Chemical Studies ◽  
Alternative Sources

The article provides brief information about cardiotonic, sedative, cytostatic, diuretic, and antibacterial effects of biologically active compounds of Adonis L. (Ranunculaceae) species. Chemical studies allowed to identify the cardiac glycosides, or cardenolides: or cardenolides: adontoxin, adonitol, adonitoxigenin, acetyldigitoxin and others. In scientific medicine, it is currently allowed to use Adonis vernalis L. Other types of Adonis have a similar chemical composition and are offered as substitutes for this official species, for example, Adonis apennina L. Many Adonis species have limited natural resources, and in some regions are rare, requiring conservation of their natural populations. The search for alternative sources of medicinal plant raw materials, based on this, is relevant. The experimental part of our research was carried out using the morphological and geographical method with the involvement of information on ecology and phenology. For the first time summarizes the diagnostic features of Adonis flora of Russian flora. Previously unknown structural features (shape and size of anthers) were identified that characterize the subgenera Adonanthe and Adonis. Taxonomic study of the genus Adonis of the Russian flora allowed us to determine its species composition, clarify its systematic affiliation, and nomenclature synonyms. 9 species were identified. Of these, 6 are perennials belonging to the subgenus Adonanthe, section Consiligo, which includes 2 subsections: Amurenses (2 species) and Vernales, which is differentiated into 2 rows: Apenninae (2 species) and Vernales (2 species). Subgenus Adonis is represented by 2 sections: Adonis (1 species) and Lophocarpa with sections Aestivales (1 species) and Dentatae (1 species). For all the considered species and varieties, the main distribution areas are given. A key has been compiled to determine the wild Adonis species distributed in Russia.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

Sign in / Sign up

Export Citation Format

Share Document