scholarly journals Potentially active normal faulting zone identified in the eastern margin of Palu City, Central Sulawesi, Indonesia

2021 ◽  
Vol 873 (1) ◽  
pp. 012071
Author(s):  
Anggraini Rizkita Puji ◽  
Mudrik Rahmawan Daryono ◽  
Danny Hilman Natawidjaja
Keyword(s):  
Active Faults ◽  
Digital Terrain Model ◽  
Slip Rate ◽  
Normal Fault ◽  
Provincial Government ◽  
Economic Losses ◽  
Normal Faults ◽  
Normal Faulting ◽  
Eastern Margin ◽  
Central Sulawesi

Abstract The 2018 Mw 7.5 earthquake in Palu, Central Sulawesi, resulting in ~2,000 fatalities and estimated economic losses of ~22.8 trillion Indonesian Rupiah, according to the report of BAPPENAS and Central Sulawesi Provincial-Government. Therefore, it is necessary to prevent similar disaster in the future by further detailed studies of any other potential sources that are capable of generating such hazards. Palu City is in the vast depression valley bordered by mountains in its eastern and western margins. The 2018 earthquake source is the Palukoro Fault, which runs through the western margin of onshore Palu Valley then continued under the bay. Along the eastern margin of the valley, we also identified a wide zone of many potentially active faults strands orienting N-S and NW-SE, showing predominantly normal faulting. These faults are observed from their normal fault scarps as inspected from Light Detection and Ranging Digital Terrain Model (LiDAR DTM) data with 90-cm resolution and field ground checks. The faults deformed the old terrace sediments (Late Pleistocene, ~125 kya), but it is unclear whether they also cut the Holocene young alluvial like the ruptured fault of 2018 event. Further paleoseismology investigation is then necessary to obtain further information about these potentially-active normal faults, including their slip-rate and the past ruptures.

The 4 December 2015 Mw 7.1 Normal-Faulting Antarctic Plate Earthquake and Its Seismotectonic Implications

2020 ◽  
Vol 110 (3) ◽  
pp. 1090-1100
Author(s):  
Ronia Andrews ◽  
Kusala Rajendran ◽  
N. Purnachandra Rao
Keyword(s):  
Body Wave ◽  
Focal Depth ◽  
Normal Fault ◽  
Normal Faults ◽  
Oceanic Plate ◽  
Normal Faulting ◽  
Transform Faults ◽  
Wave Inversion ◽  
Spreading Ridges ◽  
Southeast Indian Ridge

ABSTRACT Oceanic plate seismicity is generally dominated by normal and strike-slip faulting associated with active spreading ridges and transform faults. Fossil structural fabrics inherited from spreading ridges also host earthquakes. The Indian Oceanic plate, considered quite active seismically, has hosted earthquakes both on its active and fossil fault systems. The 4 December 2015 Mw 7.1 normal-faulting earthquake, located ∼700  km south of the southeast Indian ridge in the southern Indian Ocean, is a rarity due to its location away from the ridge, lack of association with any mapped faults and its focal depth close to the 800°C isotherm. We present results of teleseismic body-wave inversion that suggest that the earthquake occurred on a north-northwest–south-southeast-striking normal fault at a depth of 34 km. The rupture propagated at 2.7  km/s with compact slip over an area of 48×48  km2 around the hypocenter. Our analysis of the background tectonics suggests that our chosen fault plane is in the same direction as the mapped normal faults on the eastern flanks of the Kerguelen plateau. We propose that these buried normal faults, possibly the relics of the ancient rifting might have been reactivated, leading to the 2015 midplate earthquake.

scholarly journals Methodology for Earthquake Rupture Rate estimates of fault networks: example for the Western Corinth Rift, Greece

2017 ◽  
Author(s):  
Thomas Chartier ◽  
Oona Scotti ◽  
Hélène Lyon-Caen ◽  
Aurélien Boiselet
Keyword(s):  
Active Faults ◽  
Slip Rate ◽  
Seismic Hazard Assessment ◽  
System Level ◽  
Fault System ◽  
Normal Faults ◽  
Accurate Estimation ◽  
Probabilistic Seismic Hazard Assessment ◽  
Earthquake Rupture ◽  
Multiple Faults

Abstract. Modelling the seismic potential of active faults is a fundamental step of probabilistic seismic hazard assessment (PSHA). An accurate estimation of the rate of earthquakes on the faults is necessary in order to obtain the probability of exceedance of a given ground motion. Most PSHA studies consider faults as independent structures and neglect the possibility of multiple faults or fault segments rupturing simultaneously (Fault to Fault -FtF- ruptures). The latest Californian model (UCERF-3) takes into account this possibility by considering a system level approach rather than an individual fault level approach using the geological , seismological and geodetical information to invert the earthquake rates. In many places of the world seismological and geodetical information long fault networks are often not well constrained. There is therefore a need to propose a methodology relying only on geological information to compute earthquake rate of the faults in the network. In this methodology, similarly to UCERF-3, a simple distance criteria is used to define FtF ruptures and consider single faults or FtF ruptures as an aleatory uncertainty. Rates of earthquakes on faults are then computed following two constraints: the magnitude frequency distribution (MFD) of earthquakes in the fault system as a whole must follow an imposed shape and the rate of earthquakes on each fault is determined by the specific slip-rate of each segment depending on the possible FtF ruptures. The modelled earthquake rates are then confronted to the available independent data (geodetical, seismological and paleoseismological data) in order to weigh different hypothesis explored in a logic tree. The methodology is tested on the Western Corinth Rift, Greece (WCR) where recent advancements have been made in the understanding of the geological slip rates of the complex network of normal faults which are accommodating the ~15 mm/yr North-South extension. Modelling results show that geological, seismological extension rates and paleoseismological rates of earthquakes cannot be reconciled with only single fault rupture scenarios and require hypothesising a large spectrum of possible FtF rupture sets. Furthermore, in order to fit the imposed regional Gutenberg-Richter MFD target, some of the slip along certain faults needs to be accommodated either with interseismic creep or as post-seismic processes. Furthermore, individual fault’s MFDs differ depending on the position of each fault in the system and the possible FtF ruptures associated with the fault. Finally, a comparison of modelled earthquake rupture rates with those deduced from the regional and local earthquake catalogue statistics and local paleosismological data indicates a better fit with the FtF rupture set constructed with a distance criteria based on a 5 km rather than 3 km, suggesting, a high connectivity of faults in the WCR fault system.

scholarly journals A reappraisal of active tectonics along the Fethiye-Burdur trend, southwestern Turkey

2021 ◽  
Author(s):  
Edwin Nissen ◽  
Mussaver Didem Cambaz ◽  
Élyse Gaudreau ◽  
Andrew Howell ◽  
Ezgi Karasözen ◽  
...  
Keyword(s):  
Active Tectonics ◽  
Normal Fault ◽  
Recent Change ◽  
Strike Slip ◽  
Gravitational Potential Energy ◽  
Normal Faults ◽  
Normal Faulting ◽  
Arrival Times ◽  
Anatolian Plateau ◽  
Recent Earthquakes

We investigate active tectonics in southwestern Turkey along the trend between Fethiye, near the eastern end of the Hellenic subduction zone, and Burdur, on the Anatolian plateau. Previously, regional GPS velocity data have been used to propose either (1) a NE-trending zone of strike-slip faulting coined the Fethiye-Burdur Fault Zone, or (2) a mix of uniaxial and radial extension accommodated by normal faults with diverse orientations. We test these models against the available earthquake data, updated in light of recent earthquakes at Acıpayam (20 March 2019, Mw 5.6) and Bozkurt (8 August 2019, Mw 5.8) — the largest in this region in the last two decades — and at Arıcılar (24 November 2017, Mw 5.3). Using Sentinel-1 InSAR and seismic waveforms and arrival times, we show that the Acıpayam, Bozkurt and Arıcılar earthquakes were buried ruptures on pure normal faults with subtle or indistinct topographic expressions. By exploiting ray paths shared with these well-recorded modern events, we relocate earlier instrumental seismicity throughout southwestern Turkey. We find that the 1971 Mw 6.0 Burdur earthquake likely ruptured a NW-dipping normal fault in an area of indistinct geomorphology near Salda Lake, contradicting earlier studies that place it on well-expressed faults bounding the Burdur basin. Overall, the northern Fethiye-Burdur trend is characterized by orthogonal normal faulting, consistent with radial extension and likely responsible for the distinct physiography of Turkey's 'Lake District'. The southern Fethiye-Burdur trend is dominated by ESE-WNW trending normal faulting, even though most faults evident in the topography strike NE-SW. This hints at a recent change in regional strain, perhaps related to eastward propagation of the Gökova graben into the area or to rapid subsidence of the Rhodes basin. Overall, our results support GPS-derived tectonic models that depict a mix of uniaxial and radial extension throughout southwestern Turkey, with no evidence for major, active strike-slip faults anywhere along the Fethiye-Burdur trend. Normal faulting orientations are consistent with a stress field driven primarily by contrasts in gravitational potential energy between the elevated Anatolian plateau and the low-lying Rhodes and Antalya basins.

Multidisciplinary analyses for mapping and evaluating kinematics and stress/strain field at active faults and fissures at NE Rift, Mt Etna (Italy)

2021 ◽  
Author(s):  
Susanna Falsaperla ◽  
Alessandro Tibaldi ◽  
Noemi Corti ◽  
Emanuela De Beni ◽  
Fabio L. Bonali ◽  
...  
Keyword(s):  
Active Faults ◽  
Normal Fault ◽  
Structural Data ◽  
Field Work ◽  
Normal Faults ◽  
Extension Rate ◽  
Mt Etna ◽  
Hazardous Zone ◽  
Eruptive Fissures ◽  
Ne Rift

<p>Strategies for disaster risk reduction in volcanic areas are mostly driven by multidisciplinary analyses, which offer effective and complementary information on complex geomorphological and volcano-tectonic environments. For example, quantification of the offset at active faults and fissures is of paramount importance to shed light on the kinematics of zones prone to deformation and/or seismic activity. This provides key information for the assessment of seismic hazard, but also for the identification of conditions that may favor magma uprising and opening of eruptive fissures.</p><p>Here we present the results of a study encompassing detailed geological, structural and seismological observations focusing on part of the NE Rift at Etna volcano (Italy). The area is situated at an elevation ranging between 2700 and 1900 m a.s.l. where harsh meteorological conditions and difficult logistics render classical field work a troublesome issue. In order to bypass these difficulties, high-resolution (2.8 cm) UAV survey has been recently completed. The survey highlights the presence of 250 extension fractures, 20 normal fault segments, and 54 eruptive fissures. The study allows us to quantify the kinematics at extensional fractures and normal faults, obtaining an extension rate of 1.9 cm/yr for the last 406 yr. With a total of 432 structural data collected by UAV along with SfM photogrammetry, this work also demonstrates the suitability of the application of such surveys for the monitoring of hazardous zone.</p>

Faults distribution and seismogenic potential in the Calabrian back-arc domain, SE Tyrrhenian Sea

2020 ◽  
Author(s):  
Camilla Palmiotto ◽  
Maria Filomena Loreto ◽  
Francesco Muto ◽  
Valentina Ferrante ◽  
Franco Pettenati ◽  
...  
Keyword(s):  
Active Faults ◽  
Normal Fault ◽  
Historical Seismicity ◽  
Normal Faults ◽  
Transitional Region ◽  
Tyrrhenian Sea ◽  
Seismic Profiles ◽  
Offshore Area ◽  
Fault Systems ◽  
Back Arc

<p>The Western Calabrian margin (Italy) is the most active segment of the Apennine back-arc system, formed in response to the slow Africa – Eurasia convergence. The offshore area represents the transitional region between the arc and the back-arc: it is affected by several fault systems, most of them able to trigger highly destructive earthquakes. Indeed, the Calabria and its western offshore are characterized by the highest seismic moment release of the entire Apennines, also evidenced by historical seismicity catalogue, the most accurate over the world. During last decades, scientific community invested huge resources in assessment of seismic and tsunami hazards. Furthermore, during last years several local-scale works allowed of improving knowledge of the faults geometry, magmatism, seismogenic and tsunamigenic potential along the western offshore region (Loreto et al., 2017; Brutto et al., 2016; De Ritis et al., 2019). Some active faults, belonging to NE-SW-trending normal fault systems accommodating the inner-arc collapse related to slab-decupling, are also responsible of the most destructive historical sequences, still to be adequately characterized. Using vintage SPARKER 30 Kj acquired in the seventies and recent multichannel seismic profiles together with middle resolution morpho-bathymetric data we produced a new tectonic map of the Calabria back-arc system. Further, we characterized some before-unknown faults and linked them with shallow structures, as ridges and slumps / slides. This area seemingly less populated of faults compared to the peri-Tyrrhenian margin, where several faults belong to different systems, i.e. (i) the rifting system active that allowed the opening of the Tyrrhenian Basin and (ii) the slab-decupling related normal faults system currently active. The comparison with historical and instrumental seismicity allowed us to highlight possible seismic gaps that, if considered, could strongly improve the map of seismogenic potential of the Tyrrhenian back-arc system.</p><p> </p><p>Bibliography</p><p>Brutto, F. et al. (2016). The Neogene-Quaternary geodynamic evolution of the central Calabrian Arc: A case study from the western Catanzaro Trough basin. Journal of Geodynamics, 102, 95-114.</p><p>Loreto, M. F. (2017). Reconstructed seismic and tsunami scenarios of the 1905 Calabria earthquake (SE Tyrrhenian sea) as a tool for geohazard assessment. Engineering geology, 224, 1-14.</p><p>Tripodi, V. et al. (2018). Neogene-Quaternary evolution of the forearc and backarc regions between the Serre and Aspromonte Massifs, Calabria (southern Italy). Marine and Petroleum Geology, 95, 328-343.</p>

Seismic depth imaging of normal faulting in the southern Death Valley Basin

Geophysics ◽  
1998 ◽  
Vol 63 (1) ◽  
pp. 223-230 ◽  
Author(s):  
Sergio Chávez‐Pérez ◽  
John N. Louie ◽  
Sathish K. Pullammanappallil
Keyword(s):  
Normal Fault ◽  
Velocity Model ◽  
Death Valley ◽  
Normal Faults ◽  
Normal Faulting ◽  
Lateral Velocity ◽  
Western Basin ◽  
Depth Imaging ◽  
Arrival Times ◽  
Velocity Variations

Motivated by the need to image faults to test Cenozoic extension models for the Death Valley region of the western basin and range province, an area of strong lateral velocity variations, we examine the geometry of normal faulting in southern Death Valley by seismic depth imaging. We analyze COCORP Death Valley Line 9 to attain an enhanced image of shallow fault structure to 2.5 km depth. Previous work used standard seismic processing to infer normal faults from bed truncations, displacement of horizontal reflectors, and diffractions. We obtain a detailed velocity model by nonlinear optimization of first‐ arrival times picked from shot gathers, examine the unprocessed data for fault reflections, and use a Kirchhoff prestack depth imaging procedure to handle lateral velocity variations and arbitrary dips properly. Fault‐plane reflections reveal the listric true‐depth geometry of the normal fault at the Black Mountains range front in southern Death Valley. This is consistent with the concept of low‐angle extension in this region and strengthens its association with crustal‐scale magmatic plumbing.

scholarly journals Slip rate determined from cosmogenic nuclides on normal-fault facets

Geology ◽  
2020 ◽  
Vol 49 (1) ◽  
pp. 66-70
Author(s):  
Jim Tesson ◽  
Lucilla Benedetti ◽  
Vincent Godard ◽  
Catherine Novaes ◽  
Jules Fleury ◽  
...  
Keyword(s):  
Slip Rate ◽  
Normal Fault ◽  
Time Frame ◽  
Fault Slip ◽  
Normal Faults ◽  
Slip Rates ◽  
Topographic Features ◽  
The Past ◽  
Data Inversion ◽  
Fault Slip Rates

Abstract Facets are major topographic features built over several 100 k.y. above active normal faults. Their development integrates cumulative displacements over a longer time frame than many other geomorphological markers, and they are widespread in diverse extensional settings. We have determined the 36Cl cosmogenic nuclide concentration on limestone faceted spurs at four sites in the Central Apennines (Italy), representing variable facet height (100–400 m). The 36Cl concentration profiles show nearly constant values over the height of the facet, suggesting the facet slope has reached a steady-state equilibrium for 36Cl production. We model the 36Cl buildup on a facet based on a gradual exposure of the sample resulting from fault slip and denudation. Data inversion with this forward model yields accurate constraints on fault slip rates over the past 20–200 k.y., which are in agreement with the long-term rate independently determined on some of those faults over the past 1 m.y. 36Cl measurements on faceted spurs can therefore constrain fault slip rate over time spans as long as 200 k.y., a time period presently undersampled in most morphotectonic studies.

Uplift and active tectonics of southern Albania inferred from incision of alluvial terraces

2009 ◽  
Vol 71 (3) ◽  
pp. 465-476 ◽  
Author(s):  
J. Carcaillet ◽  
J.L. Mugnier ◽  
R. Koçi ◽  
F. Jouanne
Keyword(s):  
Active Faults ◽  
Active Tectonics ◽  
Slip Rate ◽  
Age Dating ◽  
Normal Faults ◽  
Published Data ◽  
Fluvial Terraces ◽  
Thrust System ◽  
Alluvial Terraces

AbstractIn Albania, the Osum and Vjoje rivers cross the active graben system and the active frontal thrust system of the Albanides. The effects of climatic and geodynamic forcing on the development of these two rivers were investigated by the means of field mapping, topographic surveying and absolute exposure-age dating. We established the chronology of terraces abandonment from the compilation of new dating (14C and in situ produced 10Be) and previously published data. We identified nine fluvial terraces units developed since Marine Isotope Stage 6 up to historic times. From this reconstituted history, we quantified the vertical uplift on a time scale shorter than the glacial climatic cycle. Regional bulging produces an overall increase of the incision rate from the west to the east that reaches a maximum value of 2.8 m/ka in the hinterland. Local pulses of incision are generated by activation of normal faults. The most active faults have a SW–NE trend and a vertical slip rate ranging from 1.8 to 2.2 m/ka. This study outlines the geodynamic control in the development of rivers flowing through the Albanides on the scale of 103–105ka.

scholarly journals The role of basement-involved normal faults in the recent tectonics of western Taiwan

2016 ◽  
Vol 153 (5-6) ◽  
pp. 1166-1191 ◽  
Author(s):  
KENN-MING YANG ◽  
RUEY-JUIN RAU ◽  
HAO-YUN CHANG ◽  
CHING-YUN HSIEH ◽  
HSIN-HSIU TING ◽  
...  
Keyword(s):  
Active Faults ◽  
Foreland Basin ◽  
Normal Fault ◽  
Strike Slip ◽  
Fault Reactivation ◽  
Normal Faults ◽  
Thrust Belt ◽  
Structural Style ◽  
Fold And Thrust Belt ◽  
Recent Tectonics

AbstractIn the foreland area of western Taiwan, some of the pre-orogenic basement-involved normal faults were reactivated during the subsequent compressional tectonics. The main purpose of this paper is to investigate the role played by the pre-existing normal faults in the recent tectonics of western Taiwan. In NW Taiwan, reactivated normal faults with a strike-slip component have developed by linkage of reactivated single pre-existing normal faults in the foreland basin and acted as transverse structures for low-angle thrusts in the outer fold-and-thrust belt. In the later stage of their development, the transverse structures were thrusted and appear underneath the low-angle thrusts or became tear faults in the inner fold-and-thrust belt. In SW Taiwan, where the foreland basin is lacking normal fault reactivation, the pre-existing normal faults passively acted as ramp for the low-angle thrusts in the inner fold-and-thrust belt. Some of the active faults in western Taiwan may also be related to reactivated normal faults with right-lateral slip component. Some main earthquake shocks related to either strike-slip or thrust fault plane solution occurred on reactivated normal faults, implying a relationship between the pre-existing normal fault and the triggering of the recent major earthquakes. Along-strike contrast in structural style of normal fault reactivation gives rise to different characteristics of the deformation front for different parts of the foreland area in western Taiwan. Variations in the degree of normal fault reactivation also provide some insights into the way the crust embedding the pre-existing normal faults deformed in response to orogenic contraction.

Synorogenic extension in the Tethyan Himalaya documented by structural studies and the Kübler index, Lachung La area, NW India

Clay Minerals ◽  
2001 ◽  
Vol 36 (2) ◽  
pp. 237-247 ◽  
Author(s):  
M. Girard ◽  
P. Thélin ◽  
A. Steck
Keyword(s):  
Normal Fault ◽  
Metamorphic Grade ◽  
Normal Faults ◽  
Structural Studies ◽  
Normal Faulting ◽  
Kübler Index ◽  
Important Extension ◽  
Layered Clay ◽  
Tethyan Himalaya

AbstractTectonic observations in the Tethyan Himalaya reveal an important extensional event that succeeds the emplacement of SW-verging nappes. A major thrust, called the Kum Tso Thrust, has been backfolded and reactivated by normal faulting associated with this event.Measurements of the Kübler index, coupled with characterization of clay-size paragenesis show the effect of normal faulting on the regional metamorphic zonation and indicate that important extension zones, like the Sarchu-Lachung La Normal Fault Zone (SLFZ), exist within the Tethyan Himalaya. Diagenetic limestones from within the SLFZ are characterized by the occurrence of mixed-layered clay phases, kaolinite and an illite with a 001 peak >0.4 Δ°2θ. This zone is bordered by two anchizonal-to-epizonal zones, where illite peaks become narrower. Further to the NE the successive appearance of biotite, chloritoid, garnet and garnet-staurolite-kyanite assemblages testifies to an increase in metamorphic grade. The cataclastic samples from the normal faults contain kaolinite, smectite and a ‘broad’ illite, indicating that extension occurs under diagenetic conditions.

Sign in / Sign up

Export Citation Format

Share Document