scholarly journals GIS Based Analysis Freight Demand in Jisr Diyala Area.

2022 ◽  
Vol 961 (1) ◽  
pp. 012078
Author(s):  
Z A Wazer ◽  
N M Asmael
Keyword(s):  
Current Problem ◽  
Construction Materials ◽  
Primary Source ◽  
Distribution Networks ◽  
Decision Makers ◽  
Travel Pattern ◽  
Analysis Techniques ◽  
Current Path ◽  
The Right ◽  
The Cost

Abstract In determining the economy of the region, freight transportation plays a major role. Usually, efficient freight distribution networks take care of reducing the cost of transporting goods to and from transportation facilities. The purpose of this analysis is to find an alternative route for the Jisr Diyala entrance, using aggregate freight data and Spatial Analysis techniques from GIS, in particular, to analyze the travel pattern of intercity truck traffic. Shipping data is obtained through roadside surveys and interviews which represent the primary source of data for this study. The study concludes by determining the best route for trucks, which reflects the current path in fact, and proposing a path to split trucks from small vehicles to avoid the current problem, as the questionnaires revealed that the largest amount of goods type was for construction materials by 32%, with the majority of commercial areas intended for users. The path and the study of the paths that link them. Using GIS techniques, various assessments of freight demand are made, and producing this analysis is helpful for decision-makers to apply the right decisions.

Allocative inefficiency, X-inefficiency, Bureaucracy and Corruption in Developing Countries

1995 ◽  
Vol 6 (1) ◽  
pp. 55-79
Author(s):  
Geoff Harris
Keyword(s):  
Resource Allocation ◽  
Developing Countries ◽  
Allocative Efficiency ◽  
Decision Makers ◽  
Relative Importance ◽  
Economic Decision ◽  
Factors Of Production ◽  
The Right ◽  
The Cost ◽  
Allocative Inefficiency

Economists have traditionally been concerned with allocative efficiency, that is, with trying to make sure that the various factors of production are allocated so that the cost of any given output is minimized. Thus, they have emphasized the importance of ‘getting the prices right’ so that these reflect the relative scarcities of inputs in the economy and give the right signals, as regards resource allocation, to economic decision-makers. From the mid-1960s, Harvey Leibenstein has drawn attention to what he has termed X-inefficiencies which derive from non-price factors such as protection/shelter of enterprises from competition, inertia on the part of managers and limited effort by workers. This article examines the relative importance of allocative inefficiency, X-inefficiency, bureaucracy and corruption in LDCs. It finds that X-inefficiencies in developing countries are far more important than allocative inefficiencies. In addition, the inefficiencies resulting from each of bureaucracy and corruption, whilst difficult to measure, are at the very least as important as allocative inefficiencies and probably much more important. It also appears that X-inefficiencies are easier and less costly to reduce than allocative inefficiencies.

Economic analysis of rehabilitation approaches for water distribution networks: comparative study between Egypt and Malaysia

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Abdelrahman M. Farouk ◽  
Rahimi A. Rahman ◽  
Noor Suraya Romali
Keyword(s):  
Water Management ◽  
Cost Effectiveness ◽  
Water Distribution ◽  
Cost Effective ◽  
Distribution Networks ◽  
Decision Makers ◽  
Sustainable Water Management ◽  
Content Type ◽  
Methods And Techniques ◽  
The Cost

Purpose Sustainable water management has been a trending goal in the past decade. Non-revenue water (NRW) is one form of water loss that should be addressed to reach water sustainability. While rehabilitating water distribution networks (WDNs) is one way to decrease NRW, the process is often delayed owing to cost. Therefore, it is essential to provide decision-makers with cost-effective approaches to optimize WDN rehabilitation. This study aims to evaluate the cost-effectiveness of approaches for rehabilitating WDN from developing countries’ perspectives. Design/methodology/approach A systematic literature review was first conducted to identify different WDN rehabilitation methods and techniques to develop the questionnaire survey. This is followed by collecting questionnaire survey data in Malaysia and Egypt on the cost and effectiveness of the WDN rehabilitation methods and techniques. A total of 176 respondents were collected, 109 from Malaysia and 67 from Egypt. Then, the data were analyzed using mean score ranking with normalization technique and agreement analysis. Findings The results from the data analysis show that the cost-effective approaches are “programming,” “simulation,” “digital twin” and “supervisory control and data acquisition.” Additionally, the data from Malaysia suggest two additional cost-effective approaches: “zoning network” and “genetic algorithm.” Originality/value To the best of the authors’ knowledge, this paper presents one of the first studies that laterally compares the cost-effectiveness of existing and potential WDN rehabilitation approaches between different countries. There is yet a study that compared these WDN rehabilitation approaches. This comparison which is developed depending on the systematic review could be a reference for future studies or surveys which could be done on different countries in the future. The main findings of this paper can be a useful reference for decision-makers, especially those from middle-income countries, when looking into approaches for WDN rehabilitation. A better WDN rehabilitation supports NRW reduction, moving towards sustainable water management.

IMPLEMENTASI JOB ORDER COSTING METHOD DALAM PERHITUNGAN HARGA POKOK PRODUKSI MAP

2018 ◽  
Vol 4 (2) ◽  
pp. 43-55
Author(s):  
Ika Yulianti ◽  
Endah Masrunik ◽  
Anam Miftakhul Huda ◽  
Diana Elvianita
Keyword(s):  
Production Process ◽  
Quantitative Data ◽  
Production Cost ◽  
Qualitative Data ◽  
Cost Data ◽  
Method Calculation ◽  
Cost Of Production ◽  
The Right ◽  
The Cost

This study aims to find a comparison of the calculation of the cost of goods manufactured in the CV. Mitra Setia Blitar uses the company's method and uses the Job Order Costing (JOC) method. The method used in this study is quantitative. The types of data used are quantitative and qualitative. Quantitative data is in the form of map production cost data while qualitative data is in the form of information about map production process. The result of calculating the cost of production of the map between the two methods results in a difference of Rp. 306. Calculation using the company method is more expensive than using the Job Order Costing method. Calculation of cost of goods manufactured using the company method is Rp. 2,205,000, - or Rp. 2,205, - each unit. While using the Job Order Costing (JOC) method is Rp. 1,899,000, - or Rp 1,899, - each unit. So that the right method used in calculating the cost of production is the Job Order Costing (JOC) method

Analisis Hidrolis dan Jejak Karbon Jaringan Distribusi Air Bersih di Pulau Kecil Padat Penduduk (Pulau Lengkang Kecil, Kota Batam)

2020 ◽  
Vol 21 (2) ◽  
pp. 227-235
Author(s):  
Muhammad Rizki Apritama ◽  
I Wayan Koko Suryawan ◽  
Yosef Adicita
Keyword(s):  
Water Supply ◽  
Distribution System ◽  
Water Distribution ◽  
Treatment Plant ◽  
Primary Source ◽  
Distribution Networks ◽  
Clean Water ◽  
Island Community ◽  
Dug Wells ◽  
Centralized Wastewater Treatment

ABSTRACTThe clean water supply system network on Lengkang Kecil Island was developed in 2019. A small portion of the community's freshwater comes from harvesting rainwater and dug wells, which are only obtained during the rainy season. The primary source of clean water used by the community comes from underwater pipelines with a daily discharge of 0.86 l/sec. The water supply of the Lengkang Kecil Island community is 74.3 m3/day, with 146 House Connections (HCs) and to serve public facilities such as elementary schools, primary health centers, and mosques. Hydraulic evaluation of clean water distribution using EPANET 2.0 software on flow velocity shows the lowest rate of 0.29 m/s and the highest of 1.21 m/s. The lowest pressure value in the distribution system is 6.94-6.96 m and headloss units in the range 0.08-0.25 m/km. These three criteria are still within the distribution network design criteria (feasible). A carbon footprint can be calculated from each activity from the analysis of the evaluation of clean water distribution networks. The most massive emissions came from pumping activities with 131 kg CO2-eq, followed by emissions from wastewater 62.5 kgCO2-eq. Further research is needed to determine the quality of wastewater and the design for a centralized wastewater treatment plant (IPALT) to improve Lengkang Kecil Island residents' living standards.Keywords: Lengkang Kecil Island, water, EPANET, carbon footprintABSTRAKJaringan sistem penyediaan air bersih pada Pulau Lengkang Kecil dimulai pada tahun 2019. Sebagian kecil air bersih yang digunakan masyarakat berasal dari pemanenan air hujan dan sumur gali yang hanya didapat pada musim hujan. Sumber air bersih utama yang digunakan masyarakat berasal dari pengaliran perpipaan bawah laut dengan debit harian 0,86 l/detik. Kebutuhan air masyarakat Pulau Lengkang Kecil adalah 74,3 m3/hari dengan 146 Sambungan Rumah (SR) serta untuk melayani fasilitas umum seperti sekolah dasar (SD), puskesmas, dan masjid. Evaluasi hidrolis distribusi air bersih dengan menggunakan software EPANET 2.0 terhadap kriteria kecepatan aliran menunjukkan nilai terendah 0,29 m/s dan tertinggi 1,21 m/s. Nilai sisa tekan dalam sistem distribusi adalah 6,94–6,96 m dan unit headloss pada kisaran 0,08–0,25 m/km. Ketiga kriteria ini masih berada dalam kriteria desain jaringan distribusi (layak). Dari analisis evaluasi jaringan distribusi air bersih, dapat dihitung jejak karbon yang dihasilkan dari setiap kegiatannya. Emisi terbesar berasal dari kegiatan pemompaan dengan nilai 131 kgCO2-eq, diikuti dengan emisi yang berasal dari air limbah dengan nilai 62,5 kgCO2-eq. Penelitian lanjutan diperlukan untuk mengetahui kualitas dari air limbah dan desain untuk instalasi pengolahan air limbah terpusat (IPALT) untuk meningkatkan taraf hidup penduduk Pulau Lengkang Kecil.Kata kunci: Pulau Lengkang Kecil, air, EPANET, jejak karbon

Protecting the Desperate: The Regulation of Payday Lending

2015 ◽  
Vol 43 (1) ◽  
pp. 147-176
Author(s):  
Andrew J Serpell
Keyword(s):  
Consumer Credit ◽  
Law Reform ◽  
Payday Lending ◽  
Short Term ◽  
Payday Loans ◽  
The Law ◽  
The Right ◽  
Credit Contracts ◽  
The Cost

Payday loans are small-amount, short-term, unsecured, high-cost credit contracts provided by non-mainstream credit providers. Payday loans are usually taken out to help the consumer pay for essential items, such as food, rent, electricity, petrol, broken-down appliances or car registration or repairs. These consumers take out payday loans because they cannot — or believe that they cannot — obtain a loan from a mainstream credit provider such as a bank. In recent years there has been a protracted debate in Australia — and in several overseas jurisdictions — about how to regulate the industry. Recent amendments to the National Consumer Credit Protection Act 2009 (Cth) — referred to in this article as the 2013 reforms — are designed to better protect payday loan consumers. While the 2013 reforms provide substantially improved protection for payday loan consumers, further changes to the law may be warranted. This article raises several law reform issues which should be considered as part of the 2015 review into small amount credit contracts, including whether the caps on the cost of credit are set at the right level, whether the required content and presentation of the consumer warnings needs to be altered, whether more needs to be done to protect consumers who are particularly disadvantaged or vulnerable and whether a general anti-avoidance provision should be included in the credit legislation.

Microcontroller Device for Conductor Identification Using Acoustic Signal

2020 ◽  
Vol 67 (1) ◽  
pp. 28-34
Author(s):  
Aleksandr V. Vinogradov ◽  
Aleksey V. Bukreev
Keyword(s):  
Acoustic Signal ◽  
Acoustic Waves ◽  
Theoretical Calculations ◽  
Poor Quality ◽  
Electrical Circuit ◽  
Research Purpose ◽  
Electrical Wiring ◽  
The Right ◽  
The Cost ◽  
Technical Solutions

When repairing and replacing electrical wiring in enterprises, the main difficulty is the lack or poor quality of documentation, plans for conductors laying. Distinguishing wires (cables) and their cores by the color of the shells or using tags attached to the ends is difficult if the shells have the same color and there are no tags. Devices and technical solutions used to identify wires and cables do not allow recognizing conductors without breaking the electrical circuit, removing insulation, and de-energizing the network. Searching for the right conductor is a time-consuming operation. (Research purpose) The research purpose is developing a new microcontroller device for identifying wires using an acoustic signal. (Materials and methods) Literature sources has been searched for devices for conductors identifying. (Results and discussion) The article proposes a method that involves feeding an acoustic signal to a wire at one point and capturing it at another, in order to recognize the desired wire. The article presents results of comparison of the developed microcontroller device for identifying conductors using an acoustic signal with known devices and methods for conductors recognizing. (Conclusions) The article reveals the shortcomings of existing methods and means of identifying wires and cables. Authors performed a theoretical calculation of the sound pressure in the conductor at a given distance. The article presents the calculation of speed of acoustic waves in conductors with different types of insulation. Authors designed a microcontroller device for identifying conductors using an acoustic signal and tested it. It was determined that the device increases the safety of work, reduces the cost of operating internal wiring and identification time; eliminates the violation of wire insulation, the need to disable electrical receivers. The convergence of theoretical calculations and experimental data was shown.

scholarly journals An Optimal Control Problem by a Hybrid System of Hyperbolic and Ordinary Differential Equations

Games ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 23
Author(s):  
Alexander Arguchintsev ◽  
Vasilisa Poplevko
Keyword(s):  
Optimal Control ◽  
Differential Equations ◽  
Optimal Control Problem ◽  
Control Problem ◽  
Ordinary Differential Equations ◽  
Hyperbolic Equations ◽  
Control Methods ◽  
The Right ◽  
The Cost ◽  
Optimal Control Methods

This paper deals with an optimal control problem for a linear system of first-order hyperbolic equations with a function on the right-hand side determined from controlled bilinear ordinary differential equations. These ordinary differential equations are linear with respect to state functions with controlled coefficients. Such problems arise in the simulation of some processes of chemical technology and population dynamics. Normally, general optimal control methods are used for these problems because of bilinear ordinary differential equations. In this paper, the problem is reduced to an optimal control problem for a system of ordinary differential equations. The reduction is based on non-classic exact increment formulas for the cost-functional. This treatment allows to use a number of efficient optimal control methods for the problem. An example illustrates the approach.

scholarly journals Stochastic Expansion Planning of Various Energy Storage Technologies in Active Power Distribution Networks

2021 ◽  
Vol 13 (10) ◽  
pp. 5752
Author(s):  
Reza Sabzehgar ◽  
Diba Zia Amirhosseini ◽  
Saeed D. Manshadi ◽  
Poria Fajri
Keyword(s):  
Energy Storage ◽  
Power Distribution ◽  
Power Flow ◽  
Lithium Ion ◽  
Distribution Networks ◽  
Renewable Energy Resources ◽  
Flow Equations ◽  
Second Order Cone ◽  
Li Ion ◽  
The Cost

This work aims to minimize the cost of installing renewable energy resources (photovoltaic systems) as well as energy storage systems (batteries), in addition to the cost of operation over a period of 20 years, which will include the cost of operating the power grid and the charging and discharging of the batteries. To this end, we propose a long-term planning optimization and expansion framework for a smart distribution network. A second order cone programming (SOCP) algorithm is utilized in this work to model the power flow equations. The minimization is computed in accordance to the years (y), seasons (s), days of the week (d), time of the day (t), and different scenarios based on the usage of energy and its production (c). An IEEE 33-bus balanced distribution test bench is utilized to evaluate the performance, effectiveness, and reliability of the proposed optimization and forecasting model. The numerical studies are conducted on two of the highest performing batteries in the current market, i.e., Lithium-ion (Li-ion) and redox flow batteries (RFBs). In addition, the pros and cons of distributed Li-ion batteries are compared with centralized RFBs. The results are presented to showcase the economic profits of utilizing these battery technologies.

scholarly journals Comparison of Economical and Technical Photovoltaic Hosting Capacity Limits in Distribution Networks

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2405
Author(s):  
Samar Fatima ◽  
Verner Püvi ◽  
Ammar Arshad ◽  
Mahdi Pourakbari-Kasmaei ◽  
Matti Lehtonen
Keyword(s):  
Power Distribution ◽  
Renewable Energy Sources ◽  
Distribution Networks ◽  
Power Distribution Networks ◽  
Network Losses ◽  
Network Costs ◽  
Cost And Benefit Analysis ◽  
Cost Parameters ◽  
The Cost ◽  
Pv Penetration

Power distribution networks are transitioning from passive towards active networks considering the incorporation of distributed generation. Traditional energy networks require possible system upgrades due to the exponential growth of non-conventional energy resources. Thus, the cost concerns of the electric utilities regarding financial models of renewable energy sources (RES) call for the cost and benefit analysis of the networks prone to unprecedented RES integration. This paper provides an evaluation of photovoltaic (PV) hosting capacity (HC) subject to economical constraint by a probabilistic analysis based on Monte Carlo (MC) simulations to consider the stochastic nature of loads. The losses carry significance in terms of cost parameters, and this article focuses on HC investigation in terms of losses and their associated cost. The network losses followed a U-shaped trajectory with increasing PV penetration in the distribution network. In the investigated case networks, increased PV penetration reduced network costs up to around 40%, defined as a ratio to the feeding secondary transformer rating. Above 40%, the losses started to increase again and at 76–87% level, the network costs were the same as in the base cases of no PVs. This point was defined as the economical PV HC of the network. In the case of networks, this level of PV penetration did not yet lead to violations of network technical limits.

Sign in / Sign up

Export Citation Format

Share Document