scholarly journals Influence of mass on tarsus shape variation: a morphometrical investigation among Rhinocerotidae (Mammalia: Perissodactyla)

2020 ◽  
Vol 129 (4) ◽  
pp. 950-974 ◽  
Author(s):  
Cyril Etienne ◽  
Christophe Mallet ◽  
Raphaël Cornette ◽  
Alexandra Houssaye
Keyword(s):  
Body Weight ◽  
Body Mass ◽  
Evolutionary History ◽  
The Body ◽  
The Other ◽  
Upright Posture ◽  
Centroid Size ◽  
Shape Variation ◽  
Morphological Adaptations ◽  
Both Bones

Abstract Many tetrapod lineages show extreme increases in body mass in their evolutionary history, associated with important osteological changes. The ankle joint, essential for foot movement, is assumed to be particularly affected in this regard. We investigated the morphological adaptations of the astragalus and the calcaneus in Rhinocerotidae, and analysed them in light of a comparative analysis with other Perissodactyla. We performed 3D geometric morphometrics and correlated shape with centroid size of the bone and body mass of the species. Our results show that mass has an influence on bone shape in Rhinocerotidae and in Perissodactyla, but this is not as strong as expected. In heavy animals the astragalus has a flatter trochlea, orientated more proximally, associated with a more upright posture of the limb. The calcaneus is more robust, possibly to sustain the greater tension force exerted by the muscles during plantarflexion. Both bones show wider articular facets, providing greater cohesion and better dissipation of the loading forces. The body plan of the animals also has an influence. Short-legged Teleoceratina have a flatter astragalus than the other rhinocerotids. Paraceratherium has a thinner calcaneus than expected. This study clarifies adaptations to high body weight among Rhinocerotidae and calls for similar investigations in other groups with massive forms.

Influence of calibration protocols for a pressure-sensing walkway on kinetic and temporospatial parameters

2015 ◽  
Vol 28 (01) ◽  
pp. 25-29 ◽  
Author(s):  
F. S. Agostinho ◽  
B. Geraldo ◽  
P. L. T. Justolin ◽  
C. R. Teixeira ◽  
F. L. M. L. Lins ◽  
...  
Keyword(s):  
Body Weight ◽  
Clinical Significance ◽  
Body Mass ◽  
Kinetic Data ◽  
The Body ◽  
The Other ◽  
Vertical Force ◽  
Calibration Technique ◽  
Pressure Sensing ◽  
Calibration Protocol

SummaryObjectives: To evaluate the influence on the kinetic and temporospatial parameters of calibration protocols with point and step techniques for a pressure-sensing walkway.Methods: Nine Labrador dogs were used. Two protocols of point calibration technique (C1 and C2) and eight protocols of step calibration technique (C3 to C10) were performed. In C1, weight was added to a stool to match the body mass of each dog. In C2, weight was added to the stool to match a 46.1 kg person. The other eight calibration protocols represented combinations of the following factors: 46.1 kg and 96.1 kg persons, barefoot or wearing sneakers, and stepping onto the platform with one or two feet.Results: The calibration protocols did not affect the temporospatial variables or percentages of body weight (%BW) distribution. Significant differences were found in both PVI (peak vertical force) and VI (vertical impulse) between barefoot versus wearing sneakers, 46.1 kg versus 96.1 kg person, and stepping onto the platform with one foot versus two feet. When comparing C1 with other protocols, significant differences were observed in PVF and VI for both forelimbs and hindlimbs. When comparing C2 with other protocols, significant differences were observed in PVF and VI for both forelimbs and hindlimbs in all protocols.Clinical significance: The PVF and VI were influenced by the calibration protocol used, but the %BW distribution and temporospatial parameters were not. Using the same calibration protocol for all dogs within the same group eliminated the variability of the kinetic data caused by the calibration.

scholarly journals Effects of Triphala on Lipid and Glucose Profiles and Anthropometric Parameters: A Systematic Review

2021 ◽  
Vol 26 ◽  
pp. 2515690X2110110
Author(s):  
Wiraphol Phimarn ◽  
Bunleu Sungthong ◽  
Hiroyuki Itabe
Keyword(s):  
Body Mass Index ◽  
Body Weight ◽  
Blood Glucose ◽  
Waist Circumference ◽  
Lipid Profile ◽  
Body Mass ◽  
The Body ◽  
Current Evidence ◽  
Diabetic Patients ◽  
Anthropometric Parameters

Aim. The efficacy of triphala on lipid profile, blood glucose and anthropometric parameters and its safety were assessed. Methods. Databases such as PubMed, ScienceDirect, Web of Science, and Thai Library Integrated System (ThaiLIS) were systematically searched to review current evidence of randomized controlled trials (RCT) on triphala. RCTs investigating the safety and efficacy of triphala on lipid profile, blood glucose and anthropometric parameters were included. Study selection, data extraction, and quality assessment were performed independently by 2 authors. Results. Twelve studies on a total of 749 patients were included. The triphala-treated groups showed significantly reduced low-density lipoprotein-cholesterol, total cholesterol and triglyceride in 6 studies. Five RCTs demonstrated triphala-treated groups led to statistically significant decrease in body weight, body mass index and waist circumference of obese patients. Moreover, triphala significantly decreased fasting blood glucose level in diabetic patients but not in people without diabetes. No serious adverse event associated with triphala was reported during treatment. Conclusions. This review summarized a current evidence to show triphala might improve the lipid profile, blood glucose, the body weight, body mass index and waist circumference under certain conditions. However, large well-designed RCTs are required to confirm this conclusion.

scholarly journals Effect of Dietary Fat Composition and 2’Fucosyllactose on Neonatal Piglet Growth and Organ Lipid Composition

2020 ◽  
Vol 4 (Supplement_2) ◽  
pp. 1038-1038
Author(s):  
Michael Miklus ◽  
Pedro Prieto ◽  
Cynthia Barber ◽  
Robert Rhoads ◽  
Samer El-Kadi
Keyword(s):  
Fatty Acids ◽  
Body Weight ◽  
Fatty Acid ◽  
Body Weight Gain ◽  
Dietary Fatty Acids ◽  
The Body ◽  
The Other ◽  
Human Infant ◽  
Lps Challenge ◽  
Group 3

Abstract Objectives The objectives of this study were to determine the effect of 2’fucosyllactose (2’FL) and fat blends on growth, body composition and fatty acid profile of the liver and brain using the neonatal pig as a model for the human infant. Methods Pigs (3 d old) were randomly assigned to either: 1. control, 2. Palm Olein (PO) fat blend – Low 2'-FL, 3. PO – High 2'-FL, 4. High oleic acid (HO) – Low 2'-FL, 5. HO FB – High 2'-FL, 6. PO FB – GLA, or 7. kept with their sows. Pigs in groups 1 to 6 received 250 ml·kg−1·d−1 of formula in 5 equal meals for 15 d. On day 14 of the study, groups 1–6 received intraperitoneal E. coli LPS challenge at 100 µg·kg−1 weight. Results Body weight was greater for piglets fed by sows than those in the other groups (P < 0.001). In addition, % fat and bone mineral content were higher in the sow-fed group while lean % was less sow-fed piglets (group 7) compared with those in the other groups (P < 0.05). Only longissimus weight expressed as a % of body weight, was greater for group 7 compared with all other groups (P < 0.001). Soleus, semitendinosus, brain, heart and spleen weights as a % of body weight were similar across all groups. However, liver weight as a % of body weight was greater in groups 1–6 (3.7%) compared with group 7 (2.8%; P < 0.001). The proportion of brain 16:1 fatty acid was less (0.83%) for groups 1–6 than for group 7 pigs (1.08%; P < 0.0001). The proportion of 20:3 N6 was greatest (0.66%) for group 3 compared with groups 1 and 4 (0.55%; P < 0.05). In addition, the proportion of 20:5 N3 was greatest (0.12%) for group 3 compared with groups 1 and 7 (0.07%; P < 0.05). The proportion of liver 16:1, 18:0, and 18:1 cis-11 fatty acids were greater for group 7 (2.3, 23, 2.2%) than groups 1–6 (0.2, 20, 1.2%; P < 0.0001). Conversely, the contribution of 14:0, 18:1 cis-9, 18:3 N6 cis-6,9,12, and 22:6 N3 were greater for pigs in groups 1–6 (1.3, 0.6, and 14, 7.8%) compared with those in group 7 (0.5, 8.5, 0.2 and 3.5%; P < 0.0001). Conclusions Our data suggest that feeding 2’fucosyllactose had no effect on the body weight gain and composition in neonatal pigs. Our data also suggest that dietary fatty acids have a greater effect on liver than on brain fatty acid composition. Funding Sources Funding for the work was provided by Perrigo Nutritionals, LLC.

Locomotory Diseases Influence on Body Equilibrium and Balance

2014 ◽  
Vol 555 ◽  
pp. 652-658 ◽  
Author(s):  
Barbu Cristian Braun ◽  
Ileana Constanta Rosca
Keyword(s):  
Body Mass ◽  
Human Subjects ◽  
Force Plate ◽  
The Body ◽  
The Other ◽  
New Method ◽  
First Person ◽  
Mass Center ◽  
Stability Problems ◽  
Research Stage

The paper describes a new method of body equilibrium evaluation applied for different human subjects, the principal aim being to demonstrate to what extent any locomotory diseases could influence the body stability and equilibrium. The research refers to identify some persons with different locomotory diseases and to find both the influence on equilibrium and stability and if possible to improve them. Our research stage, synthesized in this paper, explains the body equilibrium evaluation in orthostatic posture done for different subjects, aged between 20 and 40 years. A number of 10 relevant persons were considered to be evaluated, 2 of them having some locomotory diseases. The first person presents any neuro-motor stability problems in case of long standing case. The other person has both Achilles tendons torn and operated. All subjects were tested in orthostatic posture, in 3 distinct positions, using a Kistler force plate. The experiments referred to the body mass center (COM) displacement in sagittal and lateral planes, representing an interesting characteristic for its equilibrium. It was shown that the person with diseases affecting stability presented a loss of equilibrium when standing for 10-20 seconds, i.e. higher COM displacements in both planes reported to the other tested subjects.

scholarly journals Morphometric characteristics of the patellar tendon

2016 ◽  
Vol 69 (suppl. 1) ◽  
pp. 53-58
Author(s):  
Milodrag Vranjes ◽  
Ivan Vukasinovic ◽  
Mirko Obradovic ◽  
Mile Bjelobrk ◽  
Zlatko Budinski ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Body Weight ◽  
Body Mass ◽  
Patellar Tendon ◽  
Cruciate Ligament ◽  
The Body ◽  
Professional Athletes ◽  
Morphometric Characteristics ◽  
Significant Difference ◽  
Anterior Cruciate

Introduction. The most common injuries of the knee joint are injuries of the anterior cruciate ligament. The golden standard in reconstruction of this ligament is graft bone - patellar tendon - bone. Knowing the morphometric characteristics of these ligaments is crucial for anterior cruciate ligament reconstruction. This study was aimed at determining morphometric characteristics of the patellar tendon in vivo, measured intraoperatively, and at defining the correlation between the obtained values and body weight, height, gender and sport activity among different groups of athletes. Material and Methods. This study included 184 patients suffering from anterior cruciate ligament injuries who were admitted to the Clinical Center of Vojvodina, Department of Orthopedics and Traumatology. Results. The patellar tendon width ranged from 28 mm to 43 mm, averaging at 32.02 mm. The length of the patellar tendon ranged from 35 mm to 62 mm, averaging at 46.34 mm. The thickness of the patellar tendon ranged from 3 mm to 6 mm, averaging at 3.78 mm. The measured results were positively and statistically relevant with the body mass, height and body mass index. Discussion and Conclusion. The patellar tendon was thicker, longer and wider in persons with higher values of body weight and height. Men have statistically longer, thicker and wider patellar tendon than women. There was no statistically significant difference between morphometric characteristics of the patellar tendon among professional athletes and recreational athletes, neither was there one in the obtained geometric data of the patellar tendon among tested groups of professional athletes.

scholarly journals The relationship between body weight and exterior measurements in domestic ostriches during the first four months after hatching

2007 ◽  
Vol 23 (1-2) ◽  
pp. 13-20
Author(s):  
Andrey Kurtenkov
Keyword(s):  
Body Weight ◽  
Detailed Analysis ◽  
The Body ◽  
The Other ◽  
Phenotypic Correlation ◽  
Other Hand ◽  
The One ◽  
The Relationship ◽  
Selection Of

It is related leg problems to the realization of the necessity of doing a detailed analysis of the phenotype correlations between body weight and exterior measurements. As a result of the study, lower coefficients have been obtained of the correlation between the girth of the tarso metatarsus on one hand, and the body weight and the girth behind the wings, on the other hand (respectively 0.563 and 0.608), compared with the one between the body weight and the girth behind the wings (0.898). It is advisable in the selection of ostriches to take into consideration the necessity of a higher phenotypic correlation between the girth of the tarso metatarsus on the one hand, and the body weight and the girth behind the wings on the other hand, with a view to preventing leg problems.

Effects of age and state of incisor dentition on faecal output of dry matter and on faecal and urinary output of nitrogen and minerals, of sheep grazing hill pastures

1974 ◽  
Vol 83 (1) ◽  
pp. 151-160 ◽  
Author(s):  
A. C. Field ◽  
A. R. Sykes ◽  
R. G. Gunn
Keyword(s):  
Body Weight ◽  
Urine Volume ◽  
Late Summer ◽  
The Body ◽  
The Other ◽  
Urinary Output ◽  
Sheep Grazing ◽  
Total N ◽  
P Deficiency ◽  
Daily Intakes

SUMMARYExcretion of D.M., N, Ca, P and Mg in faeces, and N, P and Mg in urine were measured at intervals over 12 months in breeding Scottish Blackface sheep grazing hill pastures. These values were used with data on reproductive performance and body compositional changes, to calculate the energy, nitrogen and mineral balances. The sheep were: 11 6½-year-old with sound mouths (SM), 16 6½-year-old with broken mouths (BM), 16 5½-year-old with all permanent incisors clipped to gum level (CM) and 16 2½-year-old (Y). An energy supplement was given at the end of gestation and during early lactation. All faeces were collected and creatinine was used as an internal marker to estimate urine volume.Faecal D.M. output ranged from 443 to 662 g/day, with highest values in November and lowest in May. Average values for the BM sheep were lower than those for the other groups but when output was expressed as a power function of body weight, the values for the Y sheep were 15% higher than those for the other groups. Faecal excretions of Ca and P in January and February were very low and the values for P were half the expected endogenous faecal loss.Urinary output ofN ranged from 6·0 g/day in February to 22·2 g/day in August and the corresponding urinary urea N: total N ratios were 0·24 and 0·69. Urinary Mg output was highest in late summer and early winter but urinary P showed no consistent trends.The estimated daily intakes of DOM (g) were 936 in November 1969, 599 in January, 414 in February, 1075 in May, 1150 in August and 946 in November 1970.The loss of energy from the body between mating (November) and mid-lactation (June) ranged from 9·5 to 16·8% of the total calculated ME requirements in the Y and BM sheep, respectively. Maintenance requirements averaged 204 kJ/kg body weight/day and the value for the Y sheep was 12% higher than the mean for the older sheep.Nitrogen and mineral balances were calculated for February, May, August and November. The sheep were protein-deficient in winter, not from a shortage of crude protein in the diet but because of its low digestibility (34%). Intakes of Ca and P in winter were low and a real possibility of a P deficiency exists. Estimates of the concentrations of N and of minerals in the herbage consumed by the sheep were made and compared with those obtained for cut herbage from the same pastures. It would appear that the sheep selected herbage of a higher protein content than that of the cut herbage. Herbage selection was greatest in November.

Puberty in the Merino ewe with special reference to the influence of season of birth upon its occurrence

1961 ◽  
Vol 12 (1) ◽  
pp. 124 ◽  
Author(s):  
RH Watson ◽  
LC Gamble
Keyword(s):  
Body Weight ◽  
Special Reference ◽  
The Body ◽  
The Other ◽  
Gestation Period ◽  
Season Of Birth

Observations were made on the occurrence of mating and lambing in Merino ewes of three groups born in the spring, summer, and winter respectively. The lambs ware weaned at 13½–14½ weeks of age, and joined with rams within the following 2 weeks, some with fertile rams, others with vasectomized rams. Thereafter they ran with rams continuously or until lambing occurred. With few exceptions the first oestrus occurred between late November and May (summer and autumn), and the first conception between November and June. Of the ewes born in the spring, summer, and winter, 78, 100, and 95% respectively exhibited oestrus, and 63, 95, and 80% respectively conceived during the first spring, summer, and autumn following birth. All of the remainder experienced oestrus and all except one conceived during the same period in the following year. Both the age and the body weight of the ewes when oestrus and when conception first occurred varied widely. Both were least in the animals born in the spring and greatest in the animals born in the summer. The sexual season was shorter in the young ewes than it was in mature ewes. Further, the first sexual season of the youngest ewes at the time (those born in the spring) was only one-third of the length of the second sexual season or of the first sexual season of the ewes of the other two groups. There was little delay between the first opportunity to conceive and conception. However, among the ewes which mated youngest the proportion which lambed was lower than that in the other young ewes, which in turn was lower than in mature ewes. In addition, the gestation period in at least half of the ewes which lambed 3 youngest was substantially longer than it was in all except a very few of the other ewes

Development of a New Artificial Knee Joint for an Asian and Middle Eastern Population

2013 ◽  
Author(s):  
Harcharan Singh Ranu
Keyword(s):  
Finite Element ◽  
Body Weight ◽  
Maximum Load ◽  
The Body ◽  
The Other ◽  
Elastic Behavior ◽  
Loading Conditions ◽  
Load Bearing Capacity ◽  
Linear Elastic ◽  
Materials Used

Design of an artificial knee was developed using computer 3-D modeling, the high flexion knee was obtained by using a multi-radii design pattern, The increase of final 20 degrees in flexion was obtained by increasing the condylar radii of curvature. The model of the high flexion knee was developed and one of the models was subjected to finite element modeling and analysis. The compositions of components in the artificial knee were, femoral component and the tibial component were metal, whereas the patellar component and the meniscal insert were made using polyethylene. The metal component used for the analysis in this study was Ti6Al4V and the polyethylene used was UHMWPE. Overall biomaterials chosen were: meniscus (UHMWPE, mass = 0.0183701 kg, volume = 1.97518e-005 m3), tibial component (Ti6Al4V, mass = 0.0584655 kg, volume = 1.32013e-005 m3), femoral component (Ti6Al4V, mass = 0.153122 kg, volume = 3.45742e-005 m3), total artificial assembly (mass = 0.229958 kg, volume = 6.75e-005m3). However, in this design the load had been taken to 10 times the body weight. The weight over single knee is only half the maximum load as the load is shared between the two knee joints. Following were the loading conditions, taking average body weight to be 70Kgs and taking extreme loading conditions of up to 10 times the body weight, i.e. 700Kgs on each of the leg performed the Finite Element Analysis (FEA) over the newly designed knee. The loading was done at an increment of 100 Kgs. The loading conditions and the meshing details for the analysis of the assembly were Jacobian check: 4 points, element size: 0.40735 cm, tolerance: 0.20367 cm, quality: high, number of elements: 80909, number of nodes: 126898. A maximum load of 600 Kgs is optimum for this model. The other components observed linear elastic behavior for the applied loads. Based on these results it was determined that the load bearing capacity of the model were well within the failure levels of the materials used for the analysis. A maximum load of 600 Kgs is optimum for this model. The other components observed linear elastic behavior for the applied loads. Based on these results it was determined that the load bearing capacity of the model were well within the failure levels of the materials used for the analysis. Conclusion drawn from this is that for the first time an innovative new design of an artificial knee joint to suite a segment of some religious population has been developed. This allows them to pray, bend in different positions and squat without too much difficulty.

Sign in / Sign up

Export Citation Format

Share Document