Direct radioimmunoassay of 6-sulfatoxymelatonin in plasma with use of an iodinated tracer

1991 ◽  
Vol 37 (4) ◽  
pp. 536-539 ◽  
Author(s):  
Catherine Harthé ◽  
Bruno Claustrat ◽  
Jocelyne Brun ◽  
Guy Chazot
Keyword(s):  
Plasma Sample ◽  
Limit Of Detection ◽  
Circadian Variation ◽  
Hepatic Metabolism ◽  
Pharmaceutical Formulations ◽  
Practical Application ◽  
Bovine Serum Albumin Conjugate ◽  
Preliminary Study ◽  
Related Compounds

Abstract We describe here a direct a radioimmunoassay (RIA) for the determination of 6-sulfatoxymelatonin (aMT6s) in plasma, with iodinated aMT6s as tracer. The aMT6s antiserum was raised in rabbit by immunization with a bovine serum albumin conjugate, giving negligible cross-reactivities for related compounds. The low limit of detection (15 pmol/L) allowed a direct assay that required only a 100-microL plasma sample. Dilutions of plasma and of synthetic aMT6s gave the same parallel response in the RIA. A preliminary study showed a circadian variation in healthy volunteers, with mean concentrations ranging from 52 (at 1600-2100 h) to 378 pmol/L (at 0400 h), whereas this rhythm was abolished in pinealomectomized patients. After administration of melatonin orally, or by infusion, the aMT6s concentrations in plasma concorded with previous data on aMT6s production and pharmacokinetics, with aMT6s being cleared from plasma more slowly than melatonin. This assay should have practical application in the development of new pharmaceutical formulations that minimize the hepatic metabolism of melatonin.

scholarly journals DEVELOPMENT AND VALIDATION OF UV-SPECTROPHOTOMETRIC METHOD FOR ESTIMATION OF HYDROQUINONE IN BULK, MARKETED CREAM AND PREAPARED NLC FORMULATION

2017 ◽  
Vol 9 (5) ◽  
pp. 102
Author(s):  
Sukhjinder Kaur ◽  
Taranjit Kaur ◽  
Gurdeep Kaur ◽  
Shivani Verma
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Pure Form ◽  
Nanostructured Lipid Carrier ◽  
Limit Of Quantification ◽  
Double Beam ◽  
Uv Visible ◽  
Development And Validation

Objective: The aim of the present work was to develop a simple, rapid, accurate and economical UV-visible spectrophotometric method for the determination of hydroquinone (HQ) in its pure form, marketed formulation as well as in the prepared nanostructured lipid carrier (NLC) systems and to validate the developed method.Methods: HQ was estimated at UV maxima of 289.6 nm in pH 5.5 phosphate buffer using UV-Visible double beam spectrophotometer. Following the guidelines of the International Conference on Harmonization (ICH), the method was validated for various analytical parameters like linearity, precision, and accuracy robustness, ruggedness, limit of detection, quantification limit, and formulation analysis.Results: The obtained results of the analysis were validated statistically. Recovery studies were performed to confirm the accuracy of the proposed method. In the developed method, linearity over the concentration range of 5-40 μg/ml of HQ was observed with the correlation coefficient of 0.998 and found in good agreement with Beer Lambert’s law. The precision (intra-day and inter-day) of the method was found within official RCD limits (RSD<2%).Conclusion: The sensitivity of the method was assessed by determining the limit of detection and limit of quantification. It could be concluded from the results obtained that the purposed method for estimation of HQ in pure form, in the marketed ointment and in the prepared NLC-formulation was simple, rapid, accurate, precise and economical. It can be used successfully in the quality control of pharmaceutical formulations and for the routine laboratory analysis.

scholarly journals An Electrochemical Sensor Based On Graphite Electrode Modified With Silica Containing 1-N-Propyl-3-Methylimidazolium Species For Determination Of Ascorbic Acid

2019 ◽  
Vol Vol. 14, No.1 ◽  
pp. 5-14 ◽  
Author(s):  
Anastasiya Tkachenko ◽  
Mykyta Onizhuk ◽  
Oleg Tkachenko ◽  
Leliz T. Arenas ◽  
Edilson V. Benvenutt ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Cyclic Voltammetry ◽  
Electrochemical Sensor ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Differential Pulse ◽  
Long Term Stability ◽  
Diffusion Limited

In the present study, an electrochemical sensor based on the electrode (SiMImCl/C) consisting of graphite and silica, grafted with 1-n-propyl-3-methylimidazolium chloride was used for ascorbic acid (AA) quantification in pharmaceuticals and food formulations. Cyclic voltammetry and electrochemical impedance spectroscopy were applied for electrochemical characterization of the SiMImCl/C electrode. The cyclic voltammetry study revealed that the oxidation of AA on this electrode is an irreversible process, realized by adsorption and diffusion limited step. The differential pulse voltammetry was applied to develop a procedure for the AA determination. The linear range was found to be 0.3–170 μmol L-1 and the limit of detection – 0.1 μmol L-1. The proposed SiMImCl/C electrode has long term stability and does not show electrochemical activity towards the analytes, which commonly coexist with AA. The sensor was successfully used for quantification of AA in food and pharmaceutical formulations.

scholarly journals A novel online coupling of ion selective electrode with the flow injection system for the determination of vitamin B1

2016 ◽  
Vol 13 (2) ◽  
pp. 458-469
Author(s):  
Baghdad Science Journal
Keyword(s):  
Flow Injection ◽  
Dynamic Range ◽  
Limit Of Detection ◽  
Vitamin B1 ◽  
Pharmaceutical Formulations ◽  
Ion Selective Electrode ◽  
Injection System ◽  
Selective Electrode ◽  
Flow Injection System

A simple, fast, selective of a new flow injection analysis method coupled with potentiometric detection was used to determine vitamin B1 in pharmaceutical formulations via the prepared new selective membranes. Two electrodes were constructed for the determination of vitamin B1 based on the ion-pair vitamin B1-phosphotungestic acid (B1-PTA) in a poly (vinyl chloride) supported with a plasticized di-butyl phthalate (DBPH) and di-butyl phosphate (DBP). Applications of these ion selective electrodes for the determination of vitamin B1 in the pharmaceutical preparations for batch and flow injection systems were described. The ion selective membrane exhibited a near-Nernstian slope values 56.88 and 58.53 mV / decade, with the linear dynamic range of vitamin B1 was 5 x 10-5- 1 x 10-2 and 1 x 10-4-1 x 10-2 mol.L-1, in batch and FIA, respectively. The limit of detection was 3.5 x 10-5 and 9.5 x 10-5 mol.L-1, with the percentage linearity 98.85 and 95.22 in batch and FIA, respectively. The suggested ion selective electrode has been utilized perfection in the determination of vitamin B1 in pharmaceutical formulations using batch and flow injection system, respectively.

scholarly journals A simple spectrophotometric method for the determination of methyldopa using p-chloranil in the presence of hydrogen peroxide

2008 ◽  
Vol 33 (3) ◽  
pp. 7-12 ◽  
Author(s):  
M. A. Gotardo ◽  
L. S. Lima ◽  
R. Sequinel ◽  
J. L. Rufino ◽  
L. Pezza ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Limit Of Quantification ◽  
Coefficients Of Variation ◽  
The Common ◽  
Interday Precision ◽  
Sensitive Spectrophotometric Method

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of methyldopa in pharmaceutical formulations. The method is based on the reaction between tetrachloro-p-benzoquinone (p-chloranil) and methyldopa, accelerated by hydrogen peroxide (H2O2), producing a violet-red compound (λmax = 535 nm) at ambient temperature (25.0 ± 0.2 ºC). Experimental design methodologies were used to optimize the measurement conditions. Beer's law is obeyed in a concentration range from 2.10 x 10-4 to 2.48 x 10-3 mol L-1 (r = 0.9997). The limit of detection was 7.55 x 10-6 mol L-1 and the limit of quantification was 2.52 x 10-5 mol L-1. The intraday precision and interday precision were studied for 10 replicate analyses of 1.59 x 10-3 mol L-1 methyldopa solution and the respective coefficients of variation were 0.7 and 1.1 %. The proposed method was successfully applied to the determination of methyldopa in commercial brands of pharmaceuticals. No interferences were observed from the common excipients in the formulations. The results obtained by the proposed method were favorably compared with those given by the Brazilian Pharmacopoeia procedure at 95 % confidence level.

scholarly journals DEVELOPMENT AND VALIDATION OF ULTRAVIOLET-SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF FEBUXOSTAT FOR CONDUCTING IN-VITRO QUALITY CONTROL TESTS IN BULK AND PHARMACEUTICAL DOSAGE FORMS

2018 ◽  
Vol 11 (9) ◽  
pp. 115
Author(s):  
Jaspreet Kaur ◽  
Daljit Kaur ◽  
Sukhmeet Singh
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Dosage Forms ◽  
Pharmaceutical Dosage Forms ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Development And Validation

Objective: A simple, accurate, and selective ultraviolet-spectrophotometric method has been developed for the estimation of febuxostat in the bulk and pharmaceutical dosage forms.Method: The method was developed and validated according to International Conference on Harmonization (ICH Q2 R1) guidelines. The developed method was validated statistically with respect to linearity, range, precision, accuracy, ruggedness, limit of detection (LOD), limit of quantitation (LOQ), and recovery. Specificity of the method was demonstrated by applying different stressed conditions to drug samples such as acid hydrolysis, alkaline hydrolysis, oxidative, photolytic, and thermal degradation.Results: The study was conducted using phosphate buffer pH 6.8 and λmax was found to be 312 nm. Standard plot having a concentration range of 1–10 μg/ml showed a good linear relationship with R2=0.999. The LOD and LOQ were found to be 0.118 μg/ml and 0.595 μg/ml, respectively. Recovery and percentage relative standard deviations were found to be 100.157±0.332% and <2%, respectively.Conclusion: Proposed method was successfully applicable to the pharmaceutical formulations containing febuxostat. Thus, the developed method is found to be simple, sensitive, accurate, precise, reproducible, and economical for the determination of febuxostat in pharmaceutical dosage forms.

scholarly journals Sensitive Spectrophotometric Determinations of Paracetamol and Protriptyline HCl Using 3-Chloro-7-hydroxy-4-methyl-2H-chromen-2-one

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Kumble Divya ◽  
Badiadka Narayana ◽  
Majal Sapnakumari
Keyword(s):  
Charge Transfer ◽  
Spectrophotometric Method ◽  
Charge Transfer Complex ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Pharmaceutical Samples ◽  
Chromogenic Reagent ◽  
Detection And Quantification

A new spectrophotometric method is developed for the determination of Paracetamol (PCT) and protriptyline HCl (PTP) in pure forms and in pharmaceutical formulations. The experiment involves the use of 3-chloro-7-hydroxy-4-methyl-2H-chromen-2-one as a novel chromogenic reagent for the determination of PCT and PTP. The method is based on the formation of charge transfer complex between the drugs and chromogenic reagent. Beer's law is obeyed in the concentration ranges 10.00–60.00 µg mL−1 for PCT at 545 nm and 40.00–160.00 µg mL−1 for PTP at 468 nm. The molar absorptivity, Sandell, sensitivity, and limit of detection and quantification are also calculated. The method has been successfully applied for the determination of both PCT and PTP in pharmaceutical samples with acceptable results.

scholarly journals Sensitive Determination of Terazosin in Pharmaceutical Formulations and Biological Samples by Ionic-Liquid Microextraction Prior to Spectrofluorimetry

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Mohsen Zeeb ◽  
Mahdi Sadeghi
Keyword(s):  
Ionic Liquid ◽  
Ionic Strength ◽  
Biological Samples ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Experimental Conditions ◽  
Relative Standard ◽  
Common Ion ◽  
Liquid Microextraction

An efficient and environmentally friendly sample preparation method based on the application of hydrophobic 1-Hexylpyridinium hexafluorophosphate [Hpy][PF6] ionic liquid (IL) as a microextraction solvent was proposed to preconcentrate terazosin. The performance of the microextraction method was improved by introducing a common ion of pyridinium IL into the sample solution. Due to the presence of the common ion, the solubility of IL significantly decreased. As a result, the phase separation successfully occurred even at high ionic strength, and the volume of the settled IL-phase was not influenced by variations in the ionic strength (up to 30% w/v). After preconcentration step, the enriched phase was introduced to the spectrofluorimeter for the determination of terazosin. The obtained results revealed that this system did not suffer from the limitations of that in conventional ionic-liquid microextraction. Under optimum experimental conditions, the proposed method provided a limit of detection (LOD) of 0.027 μg L−1and a relative standard deviation (R.S.D.) of 2.4%. The present method was successfully applied to terazosin determination in actual pharmaceutical formulations and biological samples. Considering the large variety of ionic liquids, the proposed microextraction method earns many merits, and will present a wide application in the future.

scholarly journals Voltammetric Determination of Ascorbic Acid in Pharmaceutical Formulations Using Modified Iodine-Coated Platinum Electrode

Revista Vitae ◽  
2021 ◽  
Vol 28 (2) ◽  
Author(s):  
Mohammad Amayreh ◽  
Wafa Hourani ◽  
Mohammed Khair Hourani
Keyword(s):  
Ascorbic Acid ◽  
Platinum Electrode ◽  
Limit Of Detection ◽  
Statistical Tests ◽  
Supporting Electrolyte ◽  
Pharmaceutical Formulations ◽  
Cyclic Voltammograms ◽  
Limit Of Quantitation ◽  
Significant Difference

Background: Despite the high reactivity of the platinum electrode, the iodine-coated platinum electrode shows obvious inertness toward adsorption and surface processes. For that, iodine-coated platinum electrodes accommodate themselves to interesting voltammetric applications. Objectives: This study reports using the modified iodine-coated polycrystalline platinum electrode as a voltammetric sensor for ascorbic acid determination in pharmaceutical formulations. Methods: The developed voltammetric method based on recording cyclic voltammograms of ascorbic acid at iodine-coated electrode The optimized experimental parameters for the determination of ascorbic acid were using 0.1 M KCl as a supporting electrolyte with a scan rate of 50mV/s. Results: The anodic peak related to ascorbic acid oxidation was centered at nearly 0.28V. An excellent and extended linear dependence of the oxidative peak current on the concentration of ascorbic acid was observed in the range 2.84x10-3 - 5.68 mM. The limit of detection (LOD) and limit of quantitation (LOQ) were 1.0 µM and 3.01 µM, respectively, attesting to the method’s sensitivity. The investigation for the effect of potential interference from multivitamin tablet ingredients (vitamins B1, B6, B12, folic acid, citric acid, sucrose, glucose, and zinc) indicated specific selectivity toward ascorbic acid and the absence of any electrochemical response toward these components. Recovery results in the range 98.93±2.78 - 99.98±5.20 for spiked standard ascorbic acid in pharmaceutical formulations further confirmed the potential applicability of the developed method for the determination of ascorbic acid in real samples. Conclusions: The developed method was successfully applied to the analysis of ascorbic acid (vitamin C), and the obtained results were in good agreement with the labeled values; besides, the statistical tests indicated no significant difference at p=0.05 with a 95% confidence level.

scholarly journals A Terbium Sensitized Luminescence Method for the Assay of Flubiprofen in Pharmaceutical Formulations

2014 ◽  
Vol 19 (1) ◽  
pp. 54
Author(s):  
Salma M.Z. Al-Kindy ◽  
Arwa Al-Ghazali ◽  
Fakhr Eldin O. Suliman ◽  
Haidar A.J. Al-Lawati
Keyword(s):  
Limit Of Detection ◽  
Tap Water ◽  
Pharmaceutical Formulations ◽  
Aqueous System ◽  
Tween 20 ◽  
Luminescence Method ◽  
Time Resolved ◽  
Relative Standard ◽  
Excellent Reproducibility

A sensitive time-resolved luminescence method for the determination of flubiprofen (FLP) in methanol and in aqueous solution is described. The method is based on the luminescence sensitization of terbium (Tb3+ ) by the formation of a ternary complex with FLP in the presence of 4,7 diphenyl 1,10 phenanthroline (DPP) as co-ligand, and Tween-20 as surfactant. The signal for Tb-FLP-DPP was monitored at λex  = 285 nm and λem  = 552 nm. Optimum conditions for the formation of the complex in an aqueous system were TRIS buffer, pH 8.0, DPP (2.5Å~10−7  M), Tween-20 (0.30%) and 4Å~10-5  mol L-1  of Tb3+  which allowed the determination of 20–1000 ng mL-1  of FLP with a limit of detection (LOD) of 10 ng mL-1 . The relative standard deviations of the method ranged between 0.6 and 1.4% indicating excellent reproducibility of the method. The proposed method was successfully applied for the assays of FLP in pharmaceutical formulations and spiked tap water samples with average recoveries of 87% – 95%. 

VALIDATION OF PROPOSED RP-HPLC METHOD FOR SIMULTANEOUS ESTIMATION OF FENPIVERINIUM BROMIDE AND PITOFENONE HCL

INDIAN DRUGS ◽  
2014 ◽  
Vol 51 (07) ◽  
pp. 39-45
Author(s):  
S.V Nagpure ◽  
◽  
S.V Deshmane ◽  
K.R. Biyani
Keyword(s):  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Control Analysis ◽  
Quality Control Analysis ◽  
Rp Hplc ◽  
Limit Of Quantitation ◽  
Diammonium Hydrogen

A simple, rapid, accurate and precise RP-HPLC method was developed and validated for the determination of fenpiverinium bromide and pitofenone HCl. Separation of the drug was achieved on a reverse phase Thermo Kromasil C18 Column. The method showed a linear response for concentration in the range of 1.2-2.8μg/ml for FVB 6-14 μg/ml for PFH using diammonium hydrogen orthophosphatee buffer pH 7.2: acetonitrile as the mobile phase in the ratio of 55:45, v/v with detection at 220 nm with a flow rate of 1 ml/min and retention time was 3.77min and 7.45 min for FVB and PFH respectively. The method was statistically validated for linearity, accuracy, precision and selectivity.The limit of detection and limit of quantitation was 0.0654 µg/ml and 0.1982 µg/ml for FVB and 0.0927 µg/ml and 0.281 µg/ml for PFH, respectively. In quantitative and recovery studies, % RSD was found less than 2. Due to simplicity, rapidity and accuracy of the method, we believe that the method will be useful for routine quality control analysis of fenpiverinium bromide and pitofenone HCl in pharmaceutical formulations.

Sign in / Sign up

Export Citation Format

Share Document