scholarly journals 219 Managing Beef Cattle Growth Amidst a Global Pandemic: Lessons Learned from 2020 and Strategies for the Future

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 38-38
Author(s):  
Bradley J Johnson ◽  
Zachary K Smith
Keyword(s):  
Beef Cattle ◽  
Growth Response ◽  
Effective Means ◽  
Cost Effective ◽  
Feedlot Cattle ◽  
Lessons Learned ◽  
Live Animal ◽  
Efficient Manner ◽  
Global Pandemic ◽  
Meat Animal

Abstract The coronavirus disease-19 related events of 2020 had severe detrimental effects on meat animal production in the United State. Due to harvest facility slowdowns and shutdowns, many market animals, including beef cattle, were on feed greater than 60 d past their optimal endpoint. These dramatic changes caused many changes in feeding and growth technologies management. The two major growth enhancing compounds used in feedlot cattle production are steroidal implants (IMP) and β-adrenergic agonists (β-AA). Implementation of β-AA during the pandemic was extremely difficult due to the lack of knowledge on exact shipping dates. The β-AA are fed the last 28 to 42 d on feed. Ractopamine was approved for cattle with essential a 12-h withdrawal. Many questions arose about the maximum length of withdrawal on ractopamine before losing any of the added growth response in both the live animal and carcass. Many feedlot operators relied on IMP administration to achieve added growth response in cattle held for longer days on feed. With zero-day withdrawal on implants, it was a cost-effective means to hold cattle in an efficient manner. Many producers simply could not manage β-AA feeding during the pandemic period and used other management technologies to enhance growth and efficiency during the end of the feeding period.

Tantawan Sludge Management: Holistic Approach Introducing New Practices

2021 ◽  
Author(s):  
Woraphat Pongpitukkul ◽  
Thotsaphon Chaianansutcharit ◽  
Suppakit Learduchasai ◽  
Thunyarak Suankaew ◽  
Satiraporn Sirisampan
Keyword(s):  
Waste Management ◽  
Joint Venture ◽  
Effective Means ◽  
Holistic Approach ◽  
Cost Effective ◽  
Oil And Gas Industry ◽  
Lessons Learned ◽  
Management Policy ◽  
Arsenic Content ◽  
Sludge Management

Abstract Following Tantawan field suspension of production, considerable volume of contaminated crude (high level of mercury and arsenic content) remains on board in Tantawan FPSO. These volumes are deemed as waste hydrocarbon sludge that hold no commercial value and must be urgently removed from the vessel as per safety requirements to maintain the vessel class and certification, according to Tantawan FPSO integrity condition. After review of many alternatives, offshore subsurface disposal initiative is the safest and most cost-effective means for disposal. Since subsurface disposal of such waste, highly mercury and arsenic contaminated crude, has never been performed in the Gulf of Thailand, several aspects need to be considered from technical and environmental perspective and public sector concerns. A cross functional team of Reservoir Engineer, Geologist, Facilities Engineer, Health and Safety, Policy, Government and Public Affair and commercial advisor, has co-devised a holistic waste management plan to inject waste into Tantawan reservoirs after obtaining required approvals by the government. Many challenges including limitation of the FPSO pumping system, sludge properties and seasonal increment weather, were encountered during the execution phase and many remedial actions were taken to mitigate their impact. Cross functional team initiatives on heater installation, adjusting injection procedure, and additional disposal well approval helped address project challenges. Entire volume of sludge was safely injected to subsurface reservoirs with cost effective operation. The success of this offshore injection process has reduced the cost to less than 10% compared to onshore disposal option to asset joint venture. The results set a new standard for Thailand petroleum waste management policy. Following this success, decommissioning of all remaining of Tantawan field are progressing as scheduled. This paper will outline the holistic approach of hydrocarbon sludge management process including the subsurface injection identifcation, stakeholder engagement, environmental impact assessment and execution challenges. Lessons learned from this paper would help other offshore operators to effectively manage hydrocarbon sludge, which demonstrate how the oil and gas industry plays a vital role in protecting the environment.

Great Plains Interactive Distance Education Alliance (Great Plains IDEA)

2010 ◽  
pp. 110-130 ◽  
Author(s):  
Virginia Moxley ◽  
Sue Maes ◽  
Dawn Anderson
Keyword(s):  
Higher Education ◽  
Distance Education ◽  
Great Plains ◽  
Effective Means ◽  
Cost Effective ◽  
Lessons Learned ◽  
Academic Programs ◽  
Award Winning ◽  
Viable Solution ◽  
Higher Education Leaders

This chapter will examine the organizational and technological challenges encountered by the highly successful Great Plains Interactive Distance Education Alliance (Great Plains IDEA) since its members began offering multi-university online academic programs in 2000. Members include the following universities: Colorado State, Iowa State, Kansas State, Texas Tech, Michigan State, Missouri, Montana State, Nebraska, North Dakota State, Oklahoma State, and South Dakota State. Inter-institutional online academic programs are a cost-effective means of rapidly increasing access and addressing emerging educational needs. The chapter explains how the Great Plains IDEA began, operates and has evolved, as well as the mistakes made, lessons learned, and upcoming challenges. A major technological challenge was identifying a secure multi-institution enrollment system for sharing student data between enrolling and teaching institutions the award-winning ExpanSIS system. The authors hope that higher education leaders will be convinced that inter-institutional collaboration is a viable solution to many higher education challenges.

A retrospective and lessons learned from Natural Resources Canada’s Forest 2020 afforestation initiative

2010 ◽  
Vol 86 (3) ◽  
pp. 339-347 ◽  
Author(s):  
S W.J. Dominy ◽  
R. Gilsenan ◽  
D W McKenney ◽  
D J Allen ◽  
T. Hatton ◽  
...  
Keyword(s):  
Climate Change ◽  
Global Climate ◽  
Effective Means ◽  
Hybrid Poplar ◽  
Cost Effective ◽  
Lessons Learned ◽  
Environmental Benefits ◽  
Fast Growing ◽  
The Government ◽  
Government Of Canada

Canada is seeking cost-effective means to mitigate anthropogenic greenhouse gas emissions, particularly CO2, that have been linked to global climate change. In 2003 the Government of Canada launched the Forest 2020 Plantation Development and Assessment Initiative to assess the potential for fast-growing woody crops to sequester carbon from the atmosphere. Across the country 6000 ha of plantations were established and monitored on nonforested lands (afforestation) using a variety of methods. Economic analyses assessed the investment attractiveness of this mitigation measure for a range of species and suitable lands, taking into account such factors as growth rates, agricultural opportunity costs and a range of possible carbon values. Analyses illustrated that at current trading prices for carbon and for much of the available lands and expanding markets for forest bioproducts, expected rates of return on investment for afforestation were relatively low. However, higher future carbon prices, combined with monetary values for environmental benefits, could dramatically change the economics of afforestation in the future. Key words: afforestation, carbon sequestration, forest carbon offset project, climate change mitigation, policy analysis, risk analysis, forest investment analysis, hybrids, hybrid poplar, fast-growing trees

scholarly journals Outreach Strategies to Engage Citizen Scientists: Insights from the Biodiversity Heritage Library

2018 ◽  
Vol 2 ◽  
pp. e25641
Author(s):  
Grace Costantino
Keyword(s):  
Citizen Science ◽  
Effective Means ◽  
Cost Effective ◽  
Lessons Learned ◽  
Media Campaigns ◽  
Science Projects ◽  
Field Notes ◽  
Research Initiatives ◽  
Published Research ◽  
Support Research

How do you successfully engage volunteers in citizen science projects? In recent years, citizen science has grown considerably in popularity, resulting in rapid increases in the number of citizen science and crowdsourcing projects and providing cost-effective means for scientists to gather more data over broader spatial ranges to tackle research questions in a wide variety of scientific, conservation, and environmental fields Bonney et al. 2016, Aceves-Bueno et al. 2017. While the proliferation of such projects has produced a growing abundance of citizen scientist-generated data and published research informed by citizen science methods Follett and Strezov 2015, this also means that volunteers have a greater number of projects competing for their time. When faced with an increasingly-crowded landscape, how can you generate interest in a citizen science or crowdsourcing project and maintain contributions over the project’s lifetime? The Biodiversity Heritage Library (BHL) supports a variety of citizen science and crowdsourcing projects, from transcribing field notes to tagging scientific illustrations with taxonomic names on Flickr and enhancing data for 19th century periodicals through its Zooniverse-based Science Gossip project. Through a variety of outreach strategies including collaborative social media campaigns, partnerships with citizen science communities, and interactive incentives, BHL has successfully engaged volunteers with diverse projects to enrich the library’s data and increase discoverability of its collections. This presentation will discuss outreach strategies for citizen science projects that BHL has undertaken to further support research initiatives with our content. In addition, the presentation will share lessons-learned and offer suggestions that attendees can apply to their own citizen science engagement efforts.

Parallel Computing for Tire Simulations

2011 ◽  
Vol 39 (3) ◽  
pp. 193-209 ◽  
Author(s):  
H. Surendranath ◽  
M. Dunbar
Keyword(s):  
High Performance ◽  
Effective Means ◽  
Cost Effective ◽  
Turnaround Time ◽  
Careful Consideration ◽  
Rolling Contact ◽  
Element Analysis ◽  
Parallel Solvers ◽  
Design Changes ◽  
Highly Nonlinear

Abstract Over the last few decades, finite element analysis has become an integral part of the overall tire design process. Engineers need to perform a number of different simulations to evaluate new designs and study the effect of proposed design changes. However, tires pose formidable simulation challenges due to the presence of highly nonlinear rubber compounds, embedded reinforcements, complex tread geometries, rolling contact, and large deformations. Accurate simulation requires careful consideration of these factors, resulting in the extensive turnaround time, often times prolonging the design cycle. Therefore, it is extremely critical to explore means to reduce the turnaround time while producing reliable results. Compute clusters have recently become a cost effective means to perform high performance computing (HPC). Distributed memory parallel solvers designed to take advantage of compute clusters have become increasingly popular. In this paper, we examine the use of HPC for various tire simulations and demonstrate how it can significantly reduce simulation turnaround time. Abaqus/Standard is used for routine tire simulations like footprint and steady state rolling. Abaqus/Explicit is used for transient rolling and hydroplaning simulations. The run times and scaling data corresponding to models of various sizes and complexity are presented.

Exploring the Benefits of Early Contractor Involvement (ECI) and the Mechanism for Automated 5D BIM Quantification Process in Offsite Modular Construction

2016 ◽  
Author(s):  
Tochukwu Moses ◽  
David Heesom ◽  
David Oloke ◽  
Martin Crouch
Keyword(s):  
Effective Means ◽  
Cost Effective ◽  
Modular Construction ◽  
Automated Quantification ◽  
Building Information ◽  
Project Risks ◽  
Value Add ◽  
The Uk ◽  
The Impact ◽  
Level 2

The UK Construction Industry through its Government Construction Strategy has recently been mandated to implement Level 2 Building Information Modelling (BIM) on public sector projects. This move, along with other initiatives is key to driving a requirement for 25% cost reduction (establishing the most cost-effective means) on. Other key deliverables within the strategy include reduction in overall project time, early contractor involvement, improved sustainability and enhanced product quality. Collaboration and integrated project delivery is central to the level 2 implementation strategy yet the key protocols or standards relative to cost within BIM processes is not well defined. As offsite construction becomes more prolific within the UK construction sector, this construction approach coupled with BIM, particularly 5D automated quantification process, and early contractor involvement provides significant opportunities for the sector to meet government targets. Early contractor involvement is supported by both the industry and the successive Governments as a credible means to avoid and manage project risks, encourage innovation and value add, making cost and project time predictable, and improving outcomes. The contractor is seen as an expert in construction and could be counter intuitive to exclude such valuable expertise from the pre-construction phase especially with the BIM intent of äóÖbuild it twiceäó», once virtually and once physically. In particular when offsite construction is used, the contractoräó»s construction expertise should be leveraged for the virtual build in BIM-designed projects to ensure a fully streamlined process. Building in a layer of automated costing through 5D BIM will bring about a more robust method of quantification and can help to deliver the 25% reduction in overall cost of a project. Using a literature review and a case study, this paper will look into the benefits of Early Contractor Involvement (ECI) and the impact of 5D BIM on the offsite construction process.

scholarly journals Food Security, Environmental Health, and the Economy in Mexico: Lessons Learned with the COVID-19

2021 ◽  
Vol 13 (13) ◽  
pp. 7470
Author(s):  
Rebeca Monroy-Torres ◽  
Ángela Castillo-Chávez ◽  
Erika Carcaño-Valencia ◽  
Marco Hernández-Luna ◽  
Alex Caldera-Ortega ◽  
...  
Keyword(s):  
Food Security ◽  
Food Insecurity ◽  
Environmental Health ◽  
Public Policies ◽  
Cost Effective ◽  
Lessons Learned ◽  
Civil Society Organizations ◽  
Human Right ◽  
Healthy Environment ◽  
Mesh Terms

The COVID-19 pandemic showed an impact mainly on the health of people and the economy of households. The levels of food security in the world’s households, especially in Mexico, have decreased. When people do not have food security, their health is compromised and they have financial problems; on the other hand, environmental deterioration has a link with food security. The purpose of this review is to analysis of the current situation in Mexico of food security, environmental health and economy, the main lessons learned in these areas and their proposals integrating public policies. A review was carried out in the main databases (MEDLINE, Embase, CINAHL Plus, Web of Science, CAB Abstracts y PAIS Index) with the following keywords and according to the MeSH terms: Food security, food insecurity, environmental health, public policies, environmental, production, integrating the word COVID-19 in English and Spanish. Only 44.5% of Mexican households presented food security. For food insecurity, 22.6% had moderate and severe food insecurity, while 32.9% had mild insecurity. Food insecurity and the health impacts of environmental origin (waste management during the coronavirus pandemic, water contaminated by bacteria, viruses, and toxins; air pollution) generates impacts on economic activity by not offering food that meets health regulations. Without the application of cost-effective measures and interventions for the prevention and control of patients with obesity, the direct costs for 2023 will amount to 9 million dollars, which worsens the household economy. Despite having laws and policies on the right to food, a healthy environment (water), and opportunities for economic growth, these human rights are not fulfilled. The conclusion is that it is necessary to use a health and agroecological model to promote public policies (health, environment, and economy) that aims to prevent the discussed issues, with multidisciplinary and intersectoral interventions (government, academia, researchers, civil society organizations, industry, and population). This upholds the human right that all people should enjoy an adequate, healthy environment and have access to high-quality food.

scholarly journals mRNA-Based Vaccines

Vaccines ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 390
Author(s):  
Frank Kowalzik ◽  
Daniel Schreiner ◽  
Christian Jensen ◽  
Daniel Teschner ◽  
Stephan Gehring ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Vaccine Development ◽  
Effective Means ◽  
Cost Effective ◽  
Clinical Applications ◽  
Cell Mediated Immunity ◽  
Healthy Individuals ◽  
Emerging Pathogens ◽  
Cell Genome

Increases in the world’s population and population density promote the spread of emerging pathogens. Vaccines are the most cost-effective means of preventing this spread. Traditional methods used to identify and produce new vaccines are not adequate, in most instances, to ensure global protection. New technologies are urgently needed to expedite large scale vaccine development. mRNA-based vaccines promise to meet this need. mRNA-based vaccines exhibit a number of potential advantages relative to conventional vaccines, namely they (1) involve neither infectious elements nor a risk of stable integration into the host cell genome; (2) generate humoral and cell-mediated immunity; (3) are well-tolerated by healthy individuals; and (4) are less expensive and produced more rapidly by processes that are readily standardized and scaled-up, improving responsiveness to large emerging outbreaks. Multiple mRNA vaccine platforms have demonstrated efficacy in preventing infectious diseases and treating several types of cancers in humans as well as animal models. This review describes the factors that contribute to maximizing the production of effective mRNA vaccine transcripts and delivery systems, and the clinical applications are discussed in detail.

scholarly journals 401 Effect of zinc source and ractopamine hydrochloride on the growth performance and carcass characteristics of steers fed in confinement to harvest

2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 160-160
Author(s):  
John Wagner ◽  
William T Nelson ◽  
Terry Engle ◽  
Jerry Spears ◽  
Jeff Heldt ◽  
...  
Keyword(s):  
Feed Efficiency ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Feedlot Cattle ◽  
Beef Steers ◽  
Live Animal ◽  
Zinc Source ◽  
Dressing Percentage ◽  
Ractopamine Hydrochloride ◽  
Daily Gain

Abstract Four hundred and thirty-two beef steers (346.3 ± 63.7 kg BW) were used to determine the effects of Zn source on feedlot cattle fed ractopamine hydrochloride. Cattle were blocked in groups of 54 by BW and housed in 48 pens containing 9 steers per pen. Pens within a weight block were randomly assigned to treatments in a 2 x 3 factorial arrangement, with factors being: 1) 0 or 30.1 mg of ractopamine HCl/kg DM fed during the final 29 days on feed; and 2) Zn source: 90 mg of supplemental Zn/kg DM from ZnSO4; Zn sulfate (67%) + Zn methionine (33%); and Zn from Zn hydroxychloride, fed through the entire feeding period. Cattle were fed a high concentrate finishing diet for 154 d and slaughtered at a commercial abattoir. Average daily gain, DMI, feed efficiency and carcass characteristics were determined after slaughter. Zinc source had no impact on live animal performance. Cattle fed ractopamine HCl had greater (P < 0.01) final BW, greater (P < 0.001) ADG, improved (P < 0.001) G:F, heavier (P < 0.01) HCW, and larger (P < 0.05) longissimus muscle compared to non-ractopamine supplemented steers. There was a Zn source by ractopamine interaction (P < 0.01) for dressing percentage. Cattle receiving ractopamine HCl with Zn hydroxychloride had a greater dressing percentage (P < 0.05) when compared to ractopamine HCl cattle fed other Zn sources. Cattle receiving ractopamine HCl with Zn sulfate had a lesser dressing percentage (P < 0.05) when compared to ractopamine HCl cattle fed other Zn sources. Additional Zn source by ractopamine HCl interactions were not significant. These data indicate that Zn source has minimal impacts on feedlot steer performance and carcass characteristics when supplemented to cattle receiving 0.0 or 30.1 mg of ractopamine HCl/kg DM.

Sign in / Sign up

Export Citation Format

Share Document