scholarly journals Gravitational polarization of the quantum vacuum caused by two point-like bodies

2021 ◽  
Vol 503 (4) ◽  
pp. 5091-5099
Author(s):  
Dragan Slavkov Hajdukovic ◽  
Sergej Walter
Keyword(s):  
Dark Matter ◽  
Solar System ◽  
Charge Density ◽  
Numerical Method ◽  
Quantum Vacuum ◽  
Body System ◽  
Complex Fluid ◽  
The Impact ◽  
The Universe ◽  
Gravitational Charge

ABSTRACT In a recent paper, quantum vacuum was considered as a source of gravity, and the simplest, phenomenon, the gravitational polarization of the quantum vacuum by an immersed point-like body, was studied. In this paper, we have derived the effective gravitational charge density of the quantum vacuum, caused by two immersed point-like bodies. Among others, the obtained result proves that quantum vacuum can have regions with a negative effective gravitational charge density. Hence, quantum vacuum, the ‘ocean’ in which all matter of the Universe is immersed, acts as a complex fluid with a very variable gravitational charge density that might include both positive and negative densities; a crucial prediction that can be tested within the Solar system. In the general case of ${N \ge {\rm{3}}}$ point-like bodies, immersed in the quantum vacuum, the analytical solutions are not possible, and the use of numerical methods is inevitable. The key point is that an appropriate numerical method, for the calculation of the effective gravitational charge density of the quantum vacuum induced by N immersed bodies, might be crucial in description of galaxies, without the involvement of dark matter or a modification of gravity. The development of such a valuable numerical method, is not possible, without a previous (and in this study achieved) understanding of the impact of a two-body system.

scholarly journals Manifestations of dark energy in the dynamics of the Solar system

2009 ◽  
Vol 5 (S264) ◽  
pp. 410-412
Author(s):  
Michal Křížek ◽  
Jan Brandts
Keyword(s):  
Dark Energy ◽  
Solar System ◽  
Hubble Constant ◽  
The Sun ◽  
Expansion Speed ◽  
Current Value ◽  
The Impact ◽  
The Universe

AbstractThe expansion speed of the Universe is increasing (Glanz 1998). This acceleration is attributed to dark energy which acts almost uniformly everywhere (including the Solar system) and thus essentially influences the Hubble constant. Its current value on a distance of 1 AU is H0 = 10 m/(yr AU). This is quite a large number and thus, the impact of dark energy should be detectable in the Solar system. We will illustrate it by several examples. Dark energy may partially be caused by gravitational aberration of the Sun, planets and other bodies.

scholarly journals Constraining dark photon properties with Asteroseismology

2019 ◽  
Vol 491 (1) ◽  
pp. 409-416
Author(s):  
Adrián Ayala ◽  
Ilidio Lopes ◽  
Antonio García Hernández ◽  
Juan Carlos Suárez ◽  
Íñigo Muñoz Elorza
Keyword(s):  
Dark Matter ◽  
Standard Model ◽  
Matter Content ◽  
Solar Mass ◽  
Dark Photon ◽  
Mixing Parameter ◽  
The Standard Model ◽  
Red Giant ◽  
The Impact ◽  
The Universe

ABSTRACT Dark photons are particles invoked in some extensions of the Standard Model that could account for at least part of the dark matter content of the Universe. It has been proposed that the production of dark photons in stellar interiors could happen at a rate that depends on both, the dark photon mass and its coupling to Standard Model particles (the kinetic mixing parameter χ). In this work, we aim at exploring the impact of dark photon productions in the stellar core of solar mass red giant branch (RGB) stars during late evolutionary phases. We demonstrate that near the so-called RGB bump, dark photons production may be an energy sink for the star sufficiently significative to modify the extension of the star convective zones. We show that Asteroseismology is able to detect such variations in the structure, allowing us to predict an upper limit of $\rm 900\ eV$ and 5 × 10−15 for the mass and kinetic mixing of the dark photons, respectively. We also demonstrate that additional constraints can be derived from the fact that dark photons increase the luminosity of the RGB tip over the current observational uncertainties. This work thus paves the way for an empirical approach to deepen the study of such dark matter particles.

1. Beginnings

2021 ◽  
pp. 1-13
Author(s):  
Raymond T. Pierrehumbert
Keyword(s):  
Dark Matter ◽  
Dark Energy ◽  
Solar System ◽  
Planetary Systems ◽  
Big Bang ◽  
Giant Planets ◽  
Baryonic Matter ◽  
Rocky Planets ◽  
The Big Bang ◽  
The Universe

‘Beginnings’ discusses the general processes that form planetary systems, particularly the Solar System. Most of the Universe is made of a mysterious substance called ‘dark matter’, and an even more mysterious substance called ‘dark energy’. After the birth of the Universe in the Big Bang, the tiny bits of stardust which have accumulated contain the heavier elements (baryonic matter) that make it possible to form beings like ourselves, and the planets on which we live. We mustn't forget the importance of the formation of protostars, as well as gas and ice giant planets, the evolution of the proto-Sun, and the formation of inner rocky planets.

Hydrogen Cyanide Polymers from the Impact of Comet P/Shoemaker-Levy 9 on Jupiter

1997 ◽  
Vol 161 ◽  
pp. 179-187
Author(s):  
Clifford N. Matthews ◽  
Rose A. Pesce-Rodriguez ◽  
Shirley A. Liebman
Keyword(s):  
Amino Acids ◽  
Solar System ◽  
Hydrogen Cyanide ◽  
Nitrogen Heterocycles ◽  
Laboratory Studies ◽  
Heterogeneous Solids ◽  
The Many ◽  
Comet Halley ◽  
The Impact ◽  
By Products

AbstractHydrogen cyanide polymers – heterogeneous solids ranging in color from yellow to orange to brown to black – may be among the organic macromolecules most readily formed within the Solar System. The non-volatile black crust of comet Halley, for example, as well as the extensive orangebrown streaks in the atmosphere of Jupiter, might consist largely of such polymers synthesized from HCN formed by photolysis of methane and ammonia, the color observed depending on the concentration of HCN involved. Laboratory studies of these ubiquitous compounds point to the presence of polyamidine structures synthesized directly from hydrogen cyanide. These would be converted by water to polypeptides which can be further hydrolyzed to α-amino acids. Black polymers and multimers with conjugated ladder structures derived from HCN could also be formed and might well be the source of the many nitrogen heterocycles, adenine included, observed after pyrolysis. The dark brown color arising from the impacts of comet P/Shoemaker-Levy 9 on Jupiter might therefore be mainly caused by the presence of HCN polymers, whether originally present, deposited by the impactor or synthesized directly from HCN. Spectroscopic detection of these predicted macromolecules and their hydrolytic and pyrolytic by-products would strengthen significantly the hypothesis that cyanide polymerization is a preferred pathway for prebiotic and extraterrestrial chemistry.

The Long View of Planetary Systems

2018 ◽  
Author(s):  
Karel Schrijver
Keyword(s):  
Solar System ◽  
Milky Way ◽  
Planetary Systems ◽  
Giant Planets ◽  
Milky Way Galaxy ◽  
Population Statistics ◽  
The Past ◽  
General Terms ◽  
The Galaxy ◽  
The Universe

How many planetary systems formed before our’s did, and how many will form after? How old is the average exoplanet in the Galaxy? When did the earliest planets start forming? How different are the ages of terrestrial and giant planets? And, ultimately, what will the fate be of our Solar System, of the Milky Way Galaxy, and of the Universe around us? We cannot know the fate of individual exoplanets with great certainty, but based on population statistics this chapter sketches the past, present, and future of exoworlds and of our Earth in general terms.

The Planet in a Pebble

2010 ◽  
Author(s):  
Jan Zalasiewicz
Keyword(s):  
Solar System ◽  
Volcanic Eruptions ◽  
Big Bang ◽  
Forensic Analysis ◽  
Mineral Matter ◽  
Supernova Explosions ◽  
Deep Underground ◽  
The Big Bang ◽  
The Universe

This is the story of a single pebble. It is just a normal pebble, as you might pick up on holiday - on a beach in Wales, say. Its history, though, carries us into abyssal depths of time, and across the farthest reaches of space. This is a narrative of the Earth's long and dramatic history, as gleaned from a single pebble. It begins as the pebble-particles form amid unimaginable violence in distal realms of the Universe, in the Big Bang and in supernova explosions and continues amid the construction of the Solar System. Jan Zalasiewicz shows the almost incredible complexity present in such a small and apparently mundane object. Many events in the Earth's ancient past can be deciphered from a pebble: volcanic eruptions; the lives and deaths of extinct animals and plants; the alien nature of long-vanished oceans; and transformations deep underground, including the creations of fool's gold and of oil. Zalasiewicz demonstrates how geologists reach deep into the Earth's past by forensic analysis of even the tiniest amounts of mineral matter. Many stories are crammed into each and every pebble around us. It may be small, and ordinary, this pebble - but it is also an eloquent part of our Earth's extraordinary, never-ending story.

scholarly journals The impact of inelastic self-interacting dark matter on the dark matter structure of a Milky Way halo

2020 ◽  
Author(s):  
Kun Ting Eddie Chua ◽  
Karia Dibert ◽  
Mark Vogelsberger ◽  
Jesús Zavala
Keyword(s):  
Dark Matter ◽  
High Speed ◽  
Cold Dark Matter ◽  
Milky Way ◽  
Direct Detection ◽  
Major Axis ◽  
Inelastic Collisions ◽  
Axis Ratio ◽  
Lower Velocity ◽  
The Impact

Abstract We study the effects of inelastic dark matter self-interactions on the internal structure of a simulated Milky Way (MW)-size halo. Self-interacting dark matter (SIDM) is an alternative to collisionless cold dark matter (CDM) which offers a unique solution to the problems encountered with CDM on sub-galactic scales. Although previous SIDM simulations have mainly considered elastic collisions, theoretical considerations motivate the existence of multi-state dark matter where transitions from the excited to the ground state are exothermic. In this work, we consider a self-interacting, two-state dark matter model with inelastic collisions, implemented in the Arepo code. We find that energy injection from inelastic self-interactions reduces the central density of the MW halo in a shorter timescale relative to the elastic scale, resulting in a larger core size. Inelastic collisions also isotropize the orbits, resulting in an overall lower velocity anisotropy for the inelastic MW halo. In the inner halo, the inelastic SIDM case (minor-to-major axis ratio s ≡ c/a ≈ 0.65) is more spherical than the CDM (s ≈ 0.4), but less spherical than the elastic SIDM case (s ≈ 0.75). The speed distribution f(v) of dark matter particles at the location of the Sun in the inelastic SIDM model shows a significant departure from the CDM model, with f(v) falling more steeply at high speeds. In addition, the velocity kicks imparted during inelastic collisions produce unbound high-speed particles with velocities up to 500 km s−1 throughout the halo. This implies that inelastic SIDM can potentially leave distinct signatures in direct detection experiments, relative to elastic SIDM and CDM.

scholarly journals A Rational Numerical Method for Simulation of Drop-Impact Dynamics of Oleo-Pneumatic Landing Gear

2021 ◽  
Vol 11 (9) ◽  
pp. 4136
Author(s):  
Rosario Pecora
Keyword(s):  
Numerical Method ◽  
Initial Conditions ◽  
Impact Load ◽  
Numerical Models ◽  
Landing Gear ◽  
Design Stage ◽  
Impact Dynamics ◽  
State Variables ◽  
Adopted Model ◽  
The Impact

Oleo-pneumatic landing gear is a complex mechanical system conceived to efficiently absorb and dissipate an aircraft’s kinetic energy at touchdown, thus reducing the impact load and acceleration transmitted to the airframe. Due to its significant influence on ground loads, this system is generally designed in parallel with the main structural components of the aircraft, such as the fuselage and wings. Robust numerical models for simulating landing gear impact dynamics are essential from the preliminary design stage in order to properly assess aircraft configuration and structural arrangements. Finite element (FE) analysis is a viable solution for supporting the design. However, regarding the oleo-pneumatic struts, FE-based simulation may become unpractical, since detailed models are required to obtain reliable results. Moreover, FE models could not be very versatile for accommodating the many design updates that usually occur at the beginning of the landing gear project or during the layout optimization process. In this work, a numerical method for simulating oleo-pneumatic landing gear drop dynamics is presented. To effectively support both the preliminary and advanced design of landing gear units, the proposed simulation approach rationally balances the level of sophistication of the adopted model with the need for accurate results. Although based on a formulation assuming only four state variables for the description of landing gear dynamics, the approach successfully accounts for all the relevant forces that arise during the drop and their influence on landing gear motion. A set of intercommunicating routines was implemented in MATLAB® environment to integrate the dynamic impact equations, starting from user-defined initial conditions and general parameters related to the geometric and structural configuration of the landing gear. The tool was then used to simulate a drop test of a reference landing gear, and the obtained results were successfully validated against available experimental data.

scholarly journals Investigating the properties of a galaxy group at z = 0.6

2020 ◽  
Vol 15 (S359) ◽  
pp. 188-189
Author(s):  
Daniela Hiromi Okido ◽  
Cristina Furlanetto ◽  
Marina Trevisan ◽  
Mônica Tergolina
Keyword(s):  
Large Scale ◽  
The Other ◽  
Numerical Density ◽  
Spectroscopy Data ◽  
Stellar Kinematics ◽  
Galaxy Groups ◽  
The Galaxy ◽  
The Difference ◽  
The Impact ◽  
The Universe

AbstractGalaxy groups offer an important perspective on how the large-scale structure of the Universe has formed and evolved, being great laboratories to study the impact of the environment on the evolution of galaxies. We aim to investigate the properties of a galaxy group that is gravitationally lensing HELMS18, a submillimeter galaxy at z = 2.39. We obtained multi-object spectroscopy data using Gemini-GMOS to investigate the stellar kinematics of the central galaxies, determine its members and obtain the mass, radius and the numerical density profile of this group. Our final goal is to build a complete description of this galaxy group. In this work we present an analysis of its two central galaxies: one is an active galaxy with z = 0.59852 ± 0.00007, while the other is a passive galaxy with z = 0.6027 ± 0.0002. Furthermore, the difference between the redshifts obtained using emission and absorption lines indicates an outflow of gas with velocity v = 278.0 ± 34.3 km/s relative to the galaxy.

scholarly journals A Fractional Approach to a Computational Eco-Epidemiological Model with Holling Type-II Functional Response

Symmetry ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1159
Author(s):  
B. Günay ◽  
Praveen Agarwal ◽  
Juan L. G. Guirao ◽  
Shaher Momani
Keyword(s):  
Numerical Method ◽  
Decision Makers ◽  
Derivative Operator ◽  
Research Fields ◽  
Fractional System ◽  
Chaotic Nature ◽  
And Control ◽  
The Impact ◽  
Distinguishing Features ◽  
Type Ii Functional Response

Eco-epidemiological can be considered as a significant combination of two research fields of computational biology and epidemiology. These problems mainly take ecological systems into account of the impact of epidemiological factors. In this paper, we examine the chaotic nature of a computational system related to the spread of disease into a specific environment involving a novel differential operator called the Atangana–Baleanu fractional derivative. To approximate the solutions of this fractional system, an efficient numerical method is adopted. The numerical method is an implicit approximate method that can provide very suitable numerical approximations for fractional problems due to symmetry. Symmetry is one of the distinguishing features of this technique compared to other methods in the literature. Through considering different choices of parameters in the model, several meaningful numerical simulations are presented. It is clear that hiring a new derivative operator greatly increases the flexibility of the model in describing the different scenarios in the model. The results of this paper can be very useful help for decision-makers to describe the situation related to the problem, in a more efficient way, and control the epidemic.

Sign in / Sign up

Export Citation Format

Share Document