Chaos Rainbows

2021 ◽  
pp. 56-79
Author(s):  
William Todd Schultz
Keyword(s):  
Raw Materials ◽  
Jack Kerouac ◽  
States Of Mind ◽  
Art Making ◽  
Hard Time ◽  
Step Model ◽  
Steve Jobs ◽  
The Common ◽  
Cognitive Disinhibition ◽  
Joni Mitchell

Chapter 4 provides an examination of the common states of mind arising out of openness, including schizotypy, reduced latent inhibition, and cognitive disinhibition. The chapter reconstructs a frame of mind artists themselves have a hard time describing. From there, questions center on the shaping, the organizing, and the ordering involved in art-making. Most of the chapter is dedicated to chaos and its roots in personality. But chaos alone isn’t enough. Creativity is making something. Chaos is a means to that end, the making. How the artist uses chaos is just as important as finding ways to stay open to it. Numerous artists are used as illustrations, including Bob Dylan, Jack Kerouac, Jerry Seinfeld, Steve Jobs, and Joni Mitchell. A four-step model for how raw materials get shaped into art is also presented.

scholarly journals Selection of Fish Raw Material Suppliers by Integrating ANP and Topsis Methods in CV. Riki Utama Mandiri

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Aula Fajar Iman Sakti ◽  
Wiwik Sulistiyowati
Keyword(s):  
Supplier Selection ◽  
Raw Materials ◽  
Rank Order ◽  
Raw Material ◽  
Network Process ◽  
The Common ◽  
Common Problems ◽  
Frozen Fish ◽  
A Company ◽  
Selection Of

CV. Riki Utama Mandiri is a company in distributing an economic fish frozen product. This company distributed any kind of retail and wholesaler, both domestic and export. They distributing many frozen fish products variant such as Patin Fillet and Shark Fin. The all raw materials of those frozen seafood was obtained by three different suppliers. The common problems found in CV. Riki Utama Mandiri mostly about raw patin fish supplier which often committed delivery delays.  The purpose of this research is to fixing the supply chain management in deciding the more accurate selections of raw materials supplier. To overcome the common problems that happen. Analytical network process (ANP) will simplify the criteria weight values and sub criteria of each supplier. Meanwhile, technique for others reference by similarity to ideal solution (TOPSIS) method is used for giving a rank order of the alternative supplier. This research is expected for being a consideration for the company in obtaining a good and more effective kind of raw supplier. We also expecting the company for tighten supplier selection more effective way so that it can fullfilled the existing standard. Also to overcome the common problems such as delivery delays, competing raw materials with uncertain quality, and difficulty in sort out the raw materials due to size issues.

High Temperature Composite of Aluminous Cement with Addition of Metakaolin and Ground Bricks Dust

2013 ◽  
Vol 486 ◽  
pp. 406-411 ◽  
Author(s):  
Ondřej Holčapek ◽  
Pavel Reiterman ◽  
Petr Konvalinka
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
High Temperatures ◽  
Raw Materials ◽  
Cement Composites ◽  
Basalt Fibers ◽  
Aluminous Cement ◽  
The Common ◽  
Temperature Exposure ◽  
Sufficient Strength

The following article deals with the study of mechanical properties of aluminous cement composites exposure to high temperatures. The newly designed mixtures that resist the action of high temperatures 1000 °C find their application in various fields of industrial production or in the form of fire wall for protection bearing structures. All the mechanical properties such as compressive strength and tensile strength in bending were measured on samples 160x40x40 mm. These samples were exposed to temperatures 600 °C and 1000 °C and one group of samples was reference and stayed in laboratory condition. Aluminous cement unlike the common Portland cement keeps sufficient strength even after high temperature exposure. For ensuring required ductility the basalt fibers were added to the mixture. In an effort to use of secondary raw materials as a replacement for cement as well as a suitable binder was used metakaolin and ground brick dust. Very convenient characteristics of these components are their latent hydraulic potential that makes interesting hydration products.

Synthesis of Ti3SiC2 via Modified-SHS System through Arc Melting

2011 ◽  
Vol 239-242 ◽  
pp. 2128-2131 ◽  
Author(s):  
Julie Juliewatty Mohamed ◽  
Phua Chee Hung ◽  
Zainal Arifin Ahmad
Keyword(s):  
Raw Materials ◽  
Melting Time ◽  
Cylindrical Shape ◽  
Inter Metallic Compound ◽  
Temperature Synthesis ◽  
Arc Melting ◽  
High Temperature Synthesis ◽  
Sem Micrograph ◽  
The Common ◽  
Titanium Silicon

Inter-metallic compound of Ti3SiC2was produced via modified-SHS (self-propagating high temperature synthesis). Elemental powders of titanium, silicon and graphite were weighed according to their stoichiometric ratios (3:1:2) respectively. These powders were ball milled for 1 hour, then compacted into cylindrical shape. Synthesis of Ti3SiC2was carried out by using arc melting method. The effect of different arc melting time of 10, 30 and 60 seconds was studied. Phase formation and microstructure were analyzed by using XRD and SEM. The formation of Ti3SiC2was confirmed by XRD, and the SEM micrograph shows that the grain is in needle shape. XRD result also shows that the impurities are present in all the samples. TiC appeared to be the common and dominant impurity in all samples, with relatively low intensities in Ti5Si3and TiSi2phases. Some raw materials phase was still existed in sample arc melted for 10 and 30 seconds. Hence, it can be deduced that the raw materials had not yet fully taking part in the formation of Ti3SiC2.

scholarly journals Studies on carcinogenic PAHs emission generated by vehicles and its correlation to fuel and engine types

2014 ◽  
Vol 16 (1) ◽  
pp. 48-58 ◽  
Author(s):  
Vaneet Kumar ◽  
N.C. Kothiyal ◽  
Keyword(s):  
Vegetable Oil ◽  
Diesel Exhaust ◽  
Raw Materials ◽  
Ambient Air ◽  
Complete Conversion ◽  
Automobile Exhaust ◽  
Pahs Concentration ◽  
The Common ◽  
Almost All ◽  
Engine Type

Abstract The objective of this study was to find major PAHs produced in ambient air from the automobile exhaust as a function of fuels (diesel, petrol, and biodiesel) and engine type qualitatively and quantitatively. The recovery range was found between 30% and 70%. The study was carried out on two, three, and four wheelers. Biodiesel samples tested in the study were synthesized indigenously from different starting raw materials and analyzed for PAHs concentration in the exhaust on a Honda genset (EBK 2000AC Model). Biodiesel samples were blended with diesel in different ratio (25:75, 35:65 and 45:55) to investigate the exhaust behavior. Biodiesel was blended with Diesel the concentration of almost all PAHs reduces in comparison to pure Diesel exhaust. B(a)A and B(a) P was the common PAH found in higher concentration in almost all fuels. FTIR results indicate esterification of vegetable oil and NMR results indicate a complete conversion of oils into biodiesel.

scholarly journals The Consumption and Supply of Meat and other Livestock Raw Materials in the City of Santafé of the New Kingdom of Granada, 1572-1716

2017 ◽  
Vol 22 (2) ◽  
pp. 76-113
Author(s):  
Yoer Javier Castaño Pareja
Keyword(s):  
Seventeenth Century ◽  
Common Good ◽  
Raw Materials ◽  
Daily Life ◽  
New Kingdom ◽  
The Public ◽  
The Common Good ◽  
The Common ◽  
Livestock Products ◽  
The City

The supply of towns and cities was one of the essential functions of municipal councils. It was conceived that its efficient administration ensured the common good and the public tranquility. This article studies the official and surreptitious provision of meat and other indispensable livestock products in the daily life of the inhabitants of Santafé specially during the little explored seventeenth century. Based on various sources, in this research is calculated the magnitude of the demand in this capital of cattle that came from different geographic spaces. Through the analysis of the prices of these commodities are determined the periods of meat shortage experienced in this capital during this century and are explained the factors that caused these crises.

scholarly journals Exploring the Ways Cinematography Affects Viewers’ Perceived Empathy towards Onscreen Characters

2016 ◽  
Vol 4 (1) ◽  
pp. 88-105 ◽  
Author(s):  
Elen Lotman
Keyword(s):  
Human Perception ◽  
Professional Practices ◽  
Art Making ◽  
Emotional Empathy ◽  
Pilot Experiment ◽  
Visual Reinforcement ◽  
Neural Processes ◽  
History Of ◽  
The Common ◽  
Theoretical Foundations

Abstract In the history of cinematography there is a noticeable tradition to deliberately highlight the elements that accentuate space and spatiality in the shots. At the same time, there is also a contrary tradition, i.e. the conscious reduction of spatiality with the help of artistic tools in order to evoke a feeling of alienation. In this article I will argue that it is highly likely that the visual reinforcement of depth has become one of a cinematographer’s most frequently used tools, because it plays an important role in the audience’s perceived empathy towards onscreen characters. Since the practices of art-making – e.g. cinematography – represent a way that the empirical experience accumulated in professional practices reflects underlying neural processes, this article will first draw upon evidence from the common tenets of cinematography and reflect on how these correspond to the respective phenomena in human perception and cognition. The second part of the article examines the theory of the para-dramatic and eso-dramatic factors established by Gal Raz and Talma Hendler as it applies to cinematography; thereby suggesting possibilities for broadening the theoretical foundations of the twofold division of the causes for the viewers’ empathetic responses. The article will also introduce the results from a pilot experiment. However, I will not argue that the rendering of cinematographic space and drawing attention to certain areas are superior tools for creating filmic empathy. I will rather point out that they are often used by cinematographers when they want to create an immersive experience, and therefore, there is reason to believe that a connection exists between emotional empathy and the usage of these cinematographic tools.

scholarly journals USE OF TRAINING DISCUSSION AT LABORATORY AND PRACTICAL LESSONS WHILE IMPLEMENTING COMPETENCY BASED APPROACH

2017 ◽  
Vol 60 (7) ◽  
pp. 97
Author(s):  
Olga P. Sazhina ◽  
Oxana V. Glazkova ◽  
Alexandr A. Shabarin ◽  
Yulia I. Matyushkina
Keyword(s):  
Learning Process ◽  
Raw Materials ◽  
Sample Volume ◽  
Raw Material ◽  
Naturally Occurring ◽  
Common Activity ◽  
Competency Based ◽  
The Common ◽  
Effectiveness Of Training

An approach implemented in a higher school education system requires use of interactive forms in learning process. Using the example of organisation of laboratory and practical lessons "Methods of quality control with respect to raw materials and products of chemistry manufacture" the effectiveness of training discussions as an interactive form of learning while implementing a competency based approach was demonstrated. Analysis of natural magnetite, used as a raw material for production of iron by the pyrometallurgical method, was chosen as a subject of the discussion. Initially, students analyse State Standard (GOST) N 32517.1-2013 on their own. In class they analyse the Standard from the perspective of use of potentiometric titration instead of visual one under the supervision of instructors. They do modernization of technique for determining: correct a list of specimen used, solution strength, mass of magnetite sample, volume of a sample for titration; suggest a list of laboratory dishes and devices, make preliminary calculations and find out the calculation formula. In the course of discussion, the most preferable method of experiment is elaborated on and recorded. Upon completion a public discussion of the results is held. Each group analyses the obtained data, indicates the positive and negative sides of the suggested method for potentiometric determination of iron content in naturally occurring magnetite. Based on results of questionnaire survey having been held among students who took part in the pedagogic experiment, it was discovered that the proposed way of holding laboratory and practical lessons is more effective in comparison to the traditional one, while serving to unlock the students’ research potential. This way requires applying theoretical skills learned earlier to perform a particular research task. They also learn to work in a team, to sum up results of the common activity and hold responsibility for the results received. Moreover, public speaking is also an important point of learning process. The proposed methods of gaining skills for solution of training tasks facilitate development of intellectual, speaking and communicative students’ competences; they make future specialists more prepared for resolving real production issues.For citation:Sazhina O.P., Glazkova O.V., Shabarin A.A., Matyushkina Yu.I. Use of training discussion at laboratory and practical lessons while implementing competency based approach. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2017. V. 60. N 7. P. 97-101.

scholarly journals Self-harm: a strategy for survival and nodal point of change

2006 ◽  
Vol 12 (5) ◽  
pp. 329-337 ◽  
Author(s):  
Jack Nathan
Keyword(s):  
Therapeutic Relationship ◽  
Nodal Point ◽  
States Of Mind ◽  
Clinical Vignettes ◽  
Patient’S Experience ◽  
Key Issues ◽  
Self Harm ◽  
The Common

The author explores key issues related to psychotherapeutic work with people who self-harm. Particular attention is given to the powerful countertransference feelings that practitioners often experience in this work and the importance of managing these. Rather than maintaining a detached distance, therapists should emotionally engage with the patient's experience, creating a unique therapeutic relationship. The common patterns, functions and meanings of self-harm are discussed, with clinical vignettes that highlight the underlying dynamics of the behaviour. Self-harm is a survival stratagem, and methods for helping patients to find other ways to cope are suggested. One such is mentalisation, which can enhance the patient's capacity to think, not impulsively act. If patients learn how to assess more accurately their own and other people's states of mind, less destructive behaviours can emerge.

The European Rescue of the Franco Regime, 1950-1975

2021 ◽  
Author(s):  
Fernando Guirao
Keyword(s):  
Western Europe ◽  
European Economic Community ◽  
Raw Materials ◽  
Free Trade Area ◽  
Spanish Economy ◽  
Franco Regime ◽  
Trade Area ◽  
Political Conditionality ◽  
The Common ◽  
The Stability

This book explores how the governments of the founding members of the European Coal and Steel Community and the European Economic Community, acting collectively via the European Communities, assisted in the consolidation of the Franco regime. The Six (the Nine after 1973) provided the Spanish economy with a stable supply of raw materials and capital goods and with outlet markets for Spain’s main export commodities. Through both mechanisms, the European Communities assisted Spain’s development and supported the stabilization of its non-democratic régime. From 1950 to the mid-1960s, the Six avoided every sign of discrimination against Spain. By the mid-1960s, they became conscious of the need to promote Spanish exports in order to expand their own exports on the Spanish market. By 1970, Madrid obtained an arrangement with the EEC that, free of any political conditionality, provided ample access to the Common Market while keeping the Spanish market essentially closed. After 1972, the Nine negotiated Franco Spain’s integration into a pan-European industrial free-trade area, in exchange for access to the Spanish market. It was the Spanish cabinet, at the last minute, for protection reasons, who decided to derail the offer. The Franco regime was never threatened by European integration and the Six/Nine managed to isolate negotiations with Spain from mounting political disturbance. In sum, without unremitting material assistance from Western Europe, it would have been considerably more challenging for the Franco regime to attain the stability that enabled the dictator to maintain his rule until dying peacefully at 82 years old.

scholarly journals What Does a Mythopoetic Inquiry Look Like?

2013 ◽  
Vol 6 ◽  
Author(s):  
Susanna Ruebsaat
Keyword(s):  
Common Ground ◽  
Art Making ◽  
The World ◽  
The Common

A Mythopoetic Inquiry is a narrative of the imagination which creates an alternate story to the dominant story (individually or collectively). We create the story as we are living it; writing the narrative at the same time as we are reading it to ourselves and the world. Creating a vision while seeing; an imaginative vision about what is and what can be. A mythopoetic inquiry has its own logic but also needs to connect to reality. Art making (and other creative activities), can be a bridge between imagination and reality; letting the art tell the story from that liminal place between the conscious and unconscious. It is important to consider that there are practical aspects of this imagining. As humans we have a shared imagination (myths and archetypes) that is the common ground of this imagining.

Sign in / Sign up

Export Citation Format

Share Document