scholarly journals Anatomical variation of mesophyll conductance due to salt stress in Populus cathayana females and males growing under different inorganic nitrogen sources

2021 ◽  
Author(s):  
Miao Liu ◽  
Xiucheng Liu ◽  
Xuhua Du ◽  
Helena Korpelainen ◽  
Ülo Niinemets ◽  
...  
Keyword(s):  
Cell Wall ◽  
Salt Stress ◽  
Cell Density ◽  
Inorganic Nitrogen ◽  
Anatomical Variation ◽  
Nitrogen Sources ◽  
Mesophyll Conductance ◽  
Populus Cathayana ◽  
Co2 Conductance ◽  
Stress Dependent

Abstract Synergistic regulation in leaf architecture and photosynthesis is essential for salt tolerance. However, how plant sex and inorganic nitrogen sources alter salt stress-dependent photosynthesis remains unknown. Leaf anatomical characteristics and photosynthesis of Populus cathayana Rehder females and males were investigated under salt stress conditions combined with NO3− and NH4+ supplies to clarify the underlying mechanisms. In salt-stressed females, we observed an increased mesophyll spongy cell density, a reduced chloroplast density, a decreased surface area of chloroplasts adjacent to the intercellular air space (Sc/S) and an increased mesophyll cell area per transverse section width (S/W), consequently causing mesophyll conductance (gm) and photosynthesis inhibition, especially under NH4+ supply. Conversely, males with a greater mesophyll palisade tissue thickness and chloroplast density, but a lower spongy cell density had lower S/W and higher Sc/S, and higher gm and photosynthesis. NH4+-fed females had a lower CO2 conductance through cell wall and stromal conductance perpendicular to the cell wall, but a higher chloroplast conductance from the cell wall (gcyt1) than females supplied with NO3−, while males had a higher chloroplast conductance and lower CO2 conductance through cell wall when supplied with NO3− instead of NH4+ under salt stress. These findings indicate sex-specific strategies in coping with salt stress related to leaf anatomy and gm under both types of N supplies, which may contribute to sex-specific CO2 capture and niche segregation.

scholarly journals Microtubule Dynamics Plays a Vital Role in Plant Adaptation and Tolerance to Salt Stress

2021 ◽  
Vol 22 (11) ◽  
pp. 5957
Author(s):  
Hyun Jin Chun ◽  
Dongwon Baek ◽  
Byung Jun Jin ◽  
Hyun Min Cho ◽  
Mi Suk Park ◽  
...  
Keyword(s):  
Gene Expression ◽  
Cell Wall ◽  
Salt Stress ◽  
Differentially Expressed ◽  
Differentially Expressed Proteins ◽  
Related Gene ◽  
Plant Adaptation ◽  
Salt Stress Response ◽  
Network Analyses ◽  
Cell Wall Biogenesis

Although recent studies suggest that the plant cytoskeleton is associated with plant stress responses, such as salt, cold, and drought, the molecular mechanism underlying microtubule function in plant salt stress response remains unclear. We performed a comparative proteomic analysis between control suspension-cultured cells (A0) and salt-adapted cells (A120) established from Arabidopsis root callus to investigate plant adaptation mechanisms to long-term salt stress. We identified 50 differentially expressed proteins (45 up- and 5 down-regulated proteins) in A120 cells compared with A0 cells. Gene ontology enrichment and protein network analyses indicated that differentially expressed proteins in A120 cells were strongly associated with cell structure-associated clusters, including cytoskeleton and cell wall biogenesis. Gene expression analysis revealed that expressions of cytoskeleton-related genes, such as FBA8, TUB3, TUB4, TUB7, TUB9, and ACT7, and a cell wall biogenesis-related gene, CCoAOMT1, were induced in salt-adapted A120 cells. Moreover, the loss-of-function mutant of Arabidopsis TUB9 gene, tub9, showed a hypersensitive phenotype to salt stress. Consistent overexpression of Arabidopsis TUB9 gene in rice transgenic plants enhanced tolerance to salt stress. Our results suggest that microtubules play crucial roles in plant adaptation and tolerance to salt stress. The modulation of microtubule-related gene expression can be an effective strategy for developing salt-tolerant crops.

SALT STRESS UNDER HYDROPONIC CONDITIONS CAUSES CHANGES IN CELL WALL EXTENSION DURING GROWTH

1995 ◽  
pp. 91-98 ◽  
Author(s):  
H. Nonami ◽  
K. Tanimoto ◽  
A. Tabuchi ◽  
T. Fukuyama ◽  
Y. Hashimoto
Keyword(s):  
Cell Wall ◽  
Salt Stress ◽  
Cell Wall Extension ◽  
Hydroponic Conditions

scholarly journals Enhancement of the physical and mechanical properties of wood using a novel organo-montmorillonite/hyperbranched polyacrylate emulsion

Holzforschung ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Jianfeng Xu ◽  
Xiaoyan Li ◽  
Ling Long ◽  
Ru Liu
Keyword(s):  
Mechanical Properties ◽  
Cell Wall ◽  
Pinus Radiata ◽  
Wood Sample ◽  
Wood Cell Wall ◽  
Physical And Mechanical Properties ◽  
Radiata Pine ◽  
Compact Structure ◽  
Populus Cathayana ◽  
Modified Wood

AbstractIn this work, a novel waterborne hyperbranched polyacrylate (HBPA) dispersed organo-montmorillonite (OMMT) emulsion was synthesized and used for the treatment of wood in a vacuum environment in order to enhance the physical and mechanical properties of the wood. The sapwood of Cathay poplar (Populus cathayana Rehd.) and Radiata pine (Pinus radiata D.Don) were used as the samples for experimentation. The results showed that the physical and mechanical properties of the wood improved significantly due to the successful penetration of the OMMT and HBPA into the wood cell wall. From it was also observed that OMET completely exfoliated from the HBPA matrix and formed a hydrophobic film covering on the inside walls of the cell lumen. Further, it was observed that the poplar sample displayed better mechanical properties than the pine sample because the pine has a more compact structure when compared to poplar and contains rosin. Furthermore, it was also observed that the mechanical properties of the modified wood sample gradually improved with an increase in the concentration of the emulsion. However, excessive concentration (>4 wt%) did not lead to further improvement.

scholarly journals Transcriptomic Analysis of Betula halophila in Response to Salt Stress

2018 ◽  
Vol 19 (11) ◽  
pp. 3412 ◽  
Author(s):  
Fenjuan Shao ◽  
Lisha Zhang ◽  
Iain Wilson ◽  
Deyou Qiu
Keyword(s):  
Cell Wall ◽  
Salt Stress ◽  
Salt Tolerance ◽  
Expression Patterns ◽  
Soil Salinization ◽  
Sphingolipid Metabolism ◽  
Sequencing Platform ◽  
Resistant Varieties ◽  
High Salt Tolerance ◽  
Salt Overly Sensitive

Soil salinization is a matter of concern worldwide. It can eventually lead to the desertification of land and severely damage local agricultural production and the ecological environment. Betula halophila is a tree with high salt tolerance, so it is of importance to understand and discover the salt responsive genes of B. halophila for breeding salinity resistant varieties of trees. However, there is no report on the transcriptome in response to salt stress in B. halophila. Using Illumina sequencing platform, approximately 460 M raw reads were generated and assembled into 117,091 unigenes. Among these unigenes, 64,551 unigenes (55.12%) were annotated with gene descriptions, while the other 44.88% were unknown. 168 up-regulated genes and 351 down-regulated genes were identified, respectively. These Differentially Expressed Genes (DEGs) involved in multiple pathways including the Salt Overly Sensitive (SOS) pathway, ion transport and uptake, antioxidant enzyme, ABA signal pathway and so on. The gene ontology (GO) enrichments suggested that the DEGs were mainly involved in a plant-type cell wall organization biological process, cell wall cellular component, and structural constituent of cell wall molecular function. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment showed that the top-four enriched pathways were ‘Fatty acid elongation’, ‘Ribosome’, ‘Sphingolipid metabolism’ and ‘Flavonoid biosynthesis’. The expression patterns of sixteen DEGs were analyzed by qRT-PCR to verify the RNA-seq data. Among them, the transcription factor AT-Hook Motif Nuclear Localized gene and dehydrins might play an important role in response to salt stress in B. halophila. Our results provide an important gene resource to breed salt tolerant plants and useful information for further elucidation of the molecular mechanism of salt tolerance in B. halophila.

scholarly journals Mechanisms of Response to Salt Stress in Oleander (Nerium oleander L.)

2016 ◽  
Vol 73 (2) ◽  
pp. 249
Author(s):  
Dinesh Kumar ◽  
Mohamad Al Hassan ◽  
Oscar Vicente ◽  
Veena Agrawal ◽  
Monica Boscaiu
Keyword(s):  
Salt Stress ◽  
Abiotic Stress Tolerance ◽  
Soluble Sugar ◽  
Soluble Sugars ◽  
Nerium Oleander ◽  
Antioxidant Systems ◽  
Change Scenario ◽  
Antioxidant Compounds ◽  
Stress Dependent

Elucidating the mechanisms of abiotic stress tolerance in different species will help to develop more resistant plant varieties, contributing to improve agricultural production in a climate change scenario. Basic responses to salt stress, dependent on osmolyte accumulation and activation of antioxidant systems, have been studied in Nerium oleander, a xerophytic species widely used as ornamental. Salt strongly inhibited growth, but the plants survived one-month treatments with quite high NaCl concentrations, up to 800 mM, indicating the the species is relatively resistant to salt stress, in addition to drought. Levels of proline, glycine betaine and soluble sugars increased only slightly in the presence of salt; however, soluble sugar absolute contents were much higher than those of the other osmolytes, suggesting a functional role of these compounds in osmotic adjustment, and the presence of constitutive mechanisms of response to salt stress. High salinity generated oxidative stress in the plants, as shown by the increase of malondialdehyde levels. Antioxidant systems, enzymatic and non-enzymatic, are generally activated in response to salt stress; in oleander, they do not seem to include total phenolics or flavonoids, antioxidant compounds which did not accumulate significantly in salt-trated plants

scholarly journals Formulation of a semi-defined medium for high cell density cultivation of Escherichia coli in shake flasks

2016 ◽  
Author(s):  
Wenfa Ng ◽  
Yen-Peng Ting
Keyword(s):  
Cell Density ◽  
Yeast Extract ◽  
High Cell Density ◽  
Nitrogen Sources ◽  
Buffer System ◽  
High Cell ◽  
Carbon And Nitrogen Sources ◽  
E Coli ◽  
Carbon And Nitrogen ◽  
Shake Flasks

Microbes for environmental research should be cultured in growth media with characteristics (e.g., pH, ionic strength, and organic and ionic composition) as close to their original habitat as possible. Additionally, the medium should also enable high cell density to be obtained - needed for providing sufficient cells in subsequent experiments. This in-progress report describes the formulation of a medium with an environmentally-relevant composition (lack of complex organics), and that allows aerobic high cell density cultivation of Escherichia coli DH5α in shake flasks. The formulated medium comprises four components: a buffer system (K2HPO4: 12.54 g/L and KH2PO4: 2.31 g/L), vitamins (yeast extract: 12.0 g/L), salts (NaCl: 5.0 g/L and MgSO4: 0.24 g/L), and carbon and nitrogen sources (D-Glucose: 6.0 g/L and NH4Cl: 1.5 g/L). Notable characteristics of this medium were: high capacity phosphate buffer system (89 mM phosphate); 1:1 molar ratio between D-Glucose and NH4Cl; and yeast extract providing trace elements and a secondary carbon and nitrogen source. Growth experiments revealed that an OD600nm of 9 was attained after 24 hours of cultivation at 37 oC. Glucose and NH4Cl serve as primary carbon and nitrogen sources for this phase of growth. After 48 hours, the OD600nm reached 11, where carbohydrates, lipids and proteins in yeast extract provided the nutrients for biomass formation. Broth’s pH varied between 5.5 and 7.8 during cultivation, which was in the range conducive for E. coli growth. In comparison, the OD600nm of E. coli reached 1.4, 3.2, and 9.2 in three commonly used complex media; Nutrient Broth, LB Lennox, and Tryptic Soy Broth, respectively, over 48 hours under identical culture conditions. In addition, the formulated medium was able to maintain a large viable cell population for a longer period of time (three days) compared to Tryptic Soy Broth. Thus, preliminary data suggested that the formulated medium holds potential for use as a high cell density aerobic growth medium for Gram-negative bacteria.

Canopy position affects photosynthesis and anatomy in mature Eucalyptus trees in elevated CO2

2020 ◽  
Author(s):  
K Y Crous ◽  
C Campany ◽  
R Lopez ◽  
F J Cano ◽  
D S Ellsworth
Keyword(s):  
Elevated Co2 ◽  
Anatomical Variation ◽  
Leaf Age ◽  
Net Photosynthesis ◽  
Leaf Mass Per Area ◽  
Mesophyll Conductance ◽  
Mature Leaves ◽  
Canopy Position ◽  
Palisade Cells

Abstract Leaves are exposed to different light conditions according to their canopy position, resulting in structural and anatomical differences with consequences for carbon uptake. While these structure–function relationships have been thoroughly explored in dense forest canopies, such gradients may be diminished in open canopies, and they are often ignored in ecosystem models. We tested within-canopy differences in photosynthetic properties and structural traits in leaves in a mature Eucalyptus tereticornis canopy exposed to long-term elevated CO2 for up to three years. We explored these traits in relation to anatomical variation and diffusive processes for CO2 (i.e., stomatal conductance, gs and mesophyll conductance, gm) in both upper and lower portions of the canopy receiving ambient and elevated CO2. While shade resulted in 13% lower leaf mass per area ratio (MA) in lower versus upper canopy leaves, there was no relationship between leaf Nmass and canopy gap fraction. Both maximum carboxylation capacity (Vcmax) and maximum electron transport (Jmax) were ~ 18% lower in shaded leaves and were also reduced by ~ 22% with leaf aging. In mature leaves, we found no canopy differences for gm or gs, despite anatomical differences in MA, leaf thickness and mean mesophyll thickness between canopy positions. There was a positive relationship between net photosynthesis and gm or gs in mature leaves. Mesophyll conductance was negatively correlated with mean parenchyma length, suggesting that long palisade cells may contribute to a longer CO2 diffusional pathway and more resistance to CO2 transfer to chloroplasts. Few other relationships between gm and anatomical variables were found in mature leaves, which may be due to the open crown of Eucalyptus. Consideration of shade effects and leaf-age dependent responses to photosynthetic capacity and mesophyll conductance are critical to improve canopy photosynthesis models and will improve understanding of long-term responses to elevated CO2 in tree canopies.

Reduction of Selenite and Detoxification of Elemental Selenium by the Phototrophic BacteriumRhodospirillum rubrum

1999 ◽  
Vol 65 (11) ◽  
pp. 4734-4740 ◽  
Author(s):  
J. Kessi ◽  
M. Ramuz ◽  
E. Wehrli ◽  
M. Spycher ◽  
R. Bachofen
Keyword(s):  
Cell Wall ◽  
Plasma Membrane ◽  
Cell Density ◽  
Culture Medium ◽  
Rhodospirillum Rubrum ◽  
Buoyant Density ◽  
Elemental Selenium ◽  
Selenite Reduction ◽  
Final Cell Density ◽  
Cell Densities

ABSTRACT The effect of selenite on growth kinetics, the ability of cultures to reduce selenite, and the mechanism of detoxification of selenium were investigated by using Rhodospirillum rubrum. Anoxic photosynthetic cultures were able to completely reduce as much as 1.5 mM selenite, whereas in aerobic cultures a 0.5 mM selenite concentration was only reduced to about 0.375 mM. The presence of selenite in the culture medium strongly affected cell division. In the presence of a selenite concentration of 1.5 mM cultures reached final cell densities that were only about 15% of the control final cell density. The cell density remained nearly constant during the stationary phase for all of the selenite concentrations tested, showing that the cells were not severely damaged by the presence of selenite or elemental selenium. Particles containing elemental selenium were observed in the cytoplasm, which led to an increase in the buoyant density of the cells. Interestingly, the change in the buoyant density was reversed after selenite reduction was complete; the buoyant density of the cells returned to the buoyant density of the control cells. This demonstrated that R. rubrum expels elemental selenium across the plasma membrane and the cell wall. Accordingly, electron-dense particles were more numerous in the cells during the reduction phase than after the reduction phase.

Comparison of Organic and Inorganic Nitrogen Sources for Rice 1

1987 ◽  
Vol 79 (5) ◽  
pp. 937-943 ◽  
Author(s):  
M. P. Westcott ◽  
D. S. Mikkelsen
Keyword(s):  
Inorganic Nitrogen ◽  
Nitrogen Sources

scholarly journals Medium Optimization for Spore Production of a Straw-Cellulose Degrading Actinomyces Strain under Solid-State Fermentation Using Response Surface Method

2020 ◽  
Vol 12 (21) ◽  
pp. 8893
Author(s):  
Huanran Liu ◽  
Dan Zhang ◽  
Xia Zhang ◽  
Chuanzhi Zhou ◽  
Pei Zhou ◽  
...  
Keyword(s):  
Solid State ◽  
Solid State Fermentation ◽  
Inorganic Nitrogen ◽  
Nitrogen Sources ◽  
Spore Production ◽  
Steepest Ascent ◽  
Medium Components ◽  
Burman Design ◽  
Plackett Burman Design ◽  
Central Composite

The strains capable of degrading cellulose have attracted much interest because of their applications in straw resource utilization in solid-state fermentation (SSF). However, achieving high spore production in SSF is rarely reported. The production of spores from Streptomyces griseorubens JSD-1 was investigated in shaker-flask cultivation in this study. The optimal carbon, organic nitrogen and inorganic nitrogen sources were sucrose, yeast extract and urea, respectively. Plackett–Burman design (PBD) was adopted to determine the key medium components, and the concentration levels of three components (urea, NaCl, MgSO4·7H2O) were optimized with the steepest ascent path and central composite design (CCD), achieving 1.72 × 109 CFU/g of spore production. Under the optimal conditions (urea 2.718% w/v, NaCl 0.0697% w/v, MgSO4·7H2O 0.06956% w/v), the practical value of spore production was 1.69 × 109 CFU/g. The determination coefficient (R2) was 0.9498, which ensures an adequate credibility of the model.

Sign in / Sign up

Export Citation Format

Share Document