scholarly journals Experimental study on the effect of canyon cross wind on temperature distribution of buoyancy-induced smoke layer in tunnel fires

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Chuangang Fan ◽  
Liliang Yang ◽  
Dia Luan ◽  
Tao Chen ◽  
Ao Jiao ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Wind Speed ◽  
Decay Rate ◽  
Large Scale ◽  
Dimensionless Temperature ◽  
Fire Size ◽  
Smoke Movement ◽  
Fire Source ◽  
Smoke Layer ◽  
Fire Location

Abstract Experiments were conducted in a 1:20 arced tunnel model to investigate the effect of canyon cross wind on buoyancy-induced smoke flow characteristics of pool fires, involving smoke movement behaviour and longitudinal temperature distribution of smoke layer. The canyon wind speed, longitudinal fire location and fire size were varied. Results show that there are two special smoke behaviours with the fire source positioned at different flow field zones. When the fire source is positioned at the negative pressure zone, with increasing canyon wind speed, the smoke always exists upstream mainly due to the vortex, and the smoke temperature near the fire source increases first and then decreases. However, when the fire source is located in the transition zone and the unidirectional flow zone, there is no smoke appearing upstream with a certain canyon wind speed. Meanwhile, the smoke temperature near the fire sources are decreases with increasing canyon wind speed. The dimensionless temperature rise of the smoke layer ΔTs* along the longitudinal direction of the tunnel follows a good exponential decay. As the canyon wind speed increases, the longitudinal decay rate of ΔTs* decreases. The longitudinal decay rate of ΔTs* downstream of the fire is related to the fire location and canyon wind speed, and independent of the fire size. The empirical correlations for predicting the longitudinal decay of ΔTs* downstream of the fire are established. For a relatively large-scale fire, the longitudinal decay rate of ΔTs* upstream of the fire increases as the distance between the fire source and the upstream portal increases, especially for larger canyon wind speeds.

Simulating and Analyzing of Smoke Movement in a Corridor of High-Rise Building under Natural Exhaust

2013 ◽  
Vol 726-731 ◽  
pp. 3638-3641
Author(s):  
Wei Shi ◽  
Fu Sheng Gao
Keyword(s):  
Wind Speed ◽  
Leeward Side ◽  
Zone Model ◽  
Smoke Control ◽  
Smoke Movement ◽  
Additional Energy ◽  
High Rise ◽  
Smoke Layer ◽  
Dynamic Simulator ◽  
Fire Dynamic Simulator

The natural smoke exhaust is as acknowledged as a common smoke control manner, with simple form and does not require additional energy support either with the complex exhaust facilities. In this paper, the field model FDS (Fire Dynamic Simulator) with a combination of zone model CFAST (Consolidate Fire and Smoke Transport) were used to simulate the natural smoke exhaust in a straight corridor of a high-rise hotel, for the propose of evaluate fire safety of smoke exhaust. The major discussing factors are the outdoor wind direction, wind speed, et al. Height of smoke layer interface was used to evaluate the effect of smoke exhaust. The conclusions were obtained as followed. As the outdoor wind speed increases, the outdoor windows in the windward effects worse in natural smoke exhaust, but the window in the leeward side effects better.

scholarly journals Stator Non-Uniform Radial Ventilation Design Methodology for a 15 MW Turbo-Synchronous Generator Based on Single Ventilation Duct Subsystem

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2760
Author(s):  
Ruiye Li ◽  
Peng Cheng ◽  
Hai Lan ◽  
Weili Li ◽  
David Gerada ◽  
...  
Keyword(s):  
Finite Element ◽  
Temperature Distribution ◽  
Design Methodology ◽  
Large Scale ◽  
Synchronous Generator ◽  
Axial Direction ◽  
Scale Model ◽  
Element Analysis ◽  
Axial Temperature ◽  
Ventilation Duct

Within large turboalternators, the excessive local temperatures and spatially distributed temperature differences can accelerate the deterioration of electrical insulation as well as lead to deformation of components, which may cause major machine malfunctions. In order to homogenise the stator axial temperature distribution whilst reducing the maximum stator temperature, this paper presents a novel non-uniform radial ventilation ducts design methodology. To reduce the huge computational costs resulting from the large-scale model, the stator is decomposed into several single ventilation duct subsystems (SVDSs) along the axial direction, with each SVDS connected in series with the medium of the air gap flow rate. The calculation of electromagnetic and thermal performances within SVDS are completed by finite element method (FEM) and computational fluid dynamics (CFD), respectively. To improve the optimization efficiency, the radial basis function neural network (RBFNN) model is employed to approximate the finite element analysis, while the novel isometric sampling method (ISM) is designed to trade off the cost and accuracy of the process. It is found that the proposed methodology can provide optimal design schemes of SVDS with uniform axial temperature distribution, and the needed computation cost is markedly reduced. Finally, results based on a 15 MW turboalternator show that the peak temperature can be reduced by 7.3 ∘C (6.4%). The proposed methodology can be applied for the design and optimisation of electromagnetic-thermal coupling of other electrical machines with long axial dimensions.

scholarly journals Dynamic Loads and Response of a Spar Buoy Wind Turbine with Pitch-Controlled Rotating Blades: An Experimental Study

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3598
Author(s):  
Sara Russo ◽  
Pasquale Contestabile ◽  
Andrea Bardazzi ◽  
Elisa Leone ◽  
Gregorio Iglesias ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Laboratory Data ◽  
Nonlinear Behavior ◽  
Offshore Wind ◽  
Small Scale ◽  
Wave Steepness ◽  
Design Factor

New large-scale laboratory data are presented on a physical model of a spar buoy wind turbine with angular motion of control surfaces implemented (pitch control). The peculiarity of this type of rotating blade represents an essential aspect when studying floating offshore wind structures. Experiments were designed specifically to compare different operational environmental conditions in terms of wave steepness and wind speed. Results discussed here were derived from an analysis of only a part of the whole dataset. Consistent with recent small-scale experiments, data clearly show that the waves contributed to most of the model motions and mooring loads. A significant nonlinear behavior for sway, roll and yaw has been detected, whereas an increase in the wave period makes the wind speed less influential for surge, heave and pitch. In general, as the steepness increases, the oscillations decrease. However, higher wind speed does not mean greater platform motions. Data also indicate a significant role of the blade rotation in the turbine thrust, nacelle dynamic forces and power in six degrees of freedom. Certain pairs of wind speed-wave steepness are particularly unfavorable, since the first harmonic of the rotor (coupled to the first wave harmonic) causes the thrust force to be larger than that in more energetic sea states. The experiments suggest that the inclusion of pitch-controlled, variable-speed blades in physical (and numerical) tests on such types of structures is crucial, highlighting the importance of pitch motion as an important design factor.

scholarly journals Atmospheric Circulation Effects on Wind Speed Variability at Turbine Height

2007 ◽  
Vol 46 (4) ◽  
pp. 445-456 ◽  
Author(s):  
Katherine Klink
Keyword(s):  
Wind Speed ◽  
Pressure Gradient ◽  
Large Scale ◽  
Ground Level ◽  
The Arctic ◽  
Circulation Index ◽  
Regression Equations ◽  
Change Models ◽  
Wind Speeds ◽  
The North

Abstract Mean monthly wind speed at 70 m above ground level is investigated for 11 sites in Minnesota for the period 1995–2003. Wind speeds at these sites show significant spatial and temporal coherence, with prolonged periods of above- and below-normal values that can persist for as long as 12 months. Monthly variation in wind speed primarily is determined by the north–south pressure gradient, which captures between 22% and 47% of the variability (depending on the site). Regression on wind speed residuals (pressure gradient effects removed) shows that an additional 6%–15% of the variation can be related to the Arctic Oscillation (AO) and Niño-3.4 sea surface temperature (SST) anomalies. Wind speeds showed little correspondence with variation in the Pacific–North American (PNA) circulation index. The effect of the strong El Niño of 1997/98 on the wind speed time series was investigated by recomputing the regression equations with this period excluded. The north–south pressure gradient remains the primary determinant of mean monthly 70-m wind speeds, but with 1997/98 removed the influence of the AO increases at nearly all stations while the importance of the Niño-3.4 SSTs generally decreases. Relationships with the PNA remain small. These results suggest that long-term patterns of low-frequency wind speed (and thus wind power) variability can be estimated using large-scale circulation features as represented by large-scale climatic datasets and by climate-change models.

scholarly journals Statistical Downscaling of Daily Wind Speed Variations

2014 ◽  
Vol 53 (3) ◽  
pp. 660-675 ◽  
Author(s):  
Megan C. Kirchmeier ◽  
David J. Lorenz ◽  
Daniel J. Vimont
Keyword(s):  
Wind Speed ◽  
Gamma Distribution ◽  
Large Scale ◽  
Probabilistic Method ◽  
Probabilistic Approach ◽  
Local Scale ◽  
Scale Parameters ◽  
Wind Speeds ◽  
Distribution Shape ◽  
Realistic Information

AbstractThis study presents the development of a method to statistically downscale daily wind speed variations in an extended Great Lakes region. A probabilistic approach is used, predicting a daily-varying probability density function (PDF) of local-scale daily wind speed conditioned on large-scale daily wind speed predictors. Advantages of a probabilistic method are that it provides realistic information on the variance and extremes in addition to information on the mean, it allows the autocorrelation of downscaled realizations to be tuned to match the autocorrelation of local-scale observations, and it allows flexibility in the use of the final downscaled product. Much attention is given to fitting the proper functional form of the PDF by investigating the observed local-scale wind speed distribution (predictand) as a function of the decile of the large-scale wind (predictor). It is found that the local-scale standard deviation and the local-scale shape parameter (from a gamma distribution) are nonconstant functions of the large-scale predictor. As such, a vector generalized linear model is developed to relate the large-scale and local-scale wind speeds. Maximum likelihood and cross validation are used to fit local-scale gamma distribution shape and scale parameters to the large-scale wind speed. The result is a daily-varying probability distribution of local-scale wind speed, conditioned on the large-scale wind speed.

scholarly journals Experimental Study on Fire Sources for Full-Scale Fire Testing of Simple Sprinkler Systems Installed in Multiplexes

Fire ◽  
2021 ◽  
Vol 4 (1) ◽  
pp. 8
Author(s):  
Jeonghwa Park ◽  
Jihyun Kwark
Keyword(s):  
Large Scale ◽  
Fire Suppression ◽  
National Fire Protection Association ◽  
Control Performance ◽  
Fire Testing ◽  
Fire Control ◽  
Wood Crib ◽  
Fire Source ◽  
Sprinkler Systems ◽  
Cotton Wick

Fires are accidents that can cause numerous human casualties in multiplexes. The simple sprinkler systems applied in South Korea employ sprinklers to protect people against residential fires, as specified by the National Fire Protection Association (NFPA) standard 13D. Therefore, it is necessary to evaluate the fire control performance of multiplexes, which are at a greater risk than residential facilities. This study aims to verify the fire control performance of simple sprinklers in multiplexes and to develop a fire source that can be used as a protocol for testing fire suppression methods. The fire source was evaluated by using a 3 MW large-scale calorimeter (ISO 13784). The proposed fire source for multiplexes was applied in various forms according to the application methods, with ignition sources including cotton wick, wood crib, and heptane, and then the fire tests were conducted.

Beneficial role of diurnal smoothing for grid integration of wind power

2021 ◽  
Author(s):  
Anasuya Gangopadhyay ◽  
Ashwin K Seshadri ◽  
Ralf Toumi
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Diurnal Cycle ◽  
Power Plants ◽  
Large Scale ◽  
Positive Impact ◽  
Forecast Error ◽  
Wind Generation ◽  
Grid Integration ◽  
Wind Maximum

<p>Smoothing of wind generation variability is important for grid integration of large-scale wind power plants. One approach to achieving smoothing is aggregating wind generation from plants that have uncorrelated or negatively correlated wind speed. It is well known that the wind speed correlation on average decays with increasing distance between plants, but the correlations may not be explained by distance alone. In India, the wind speed diurnal cycle plays a significant role in explaining the hourly correlation of wind speed between location pairs. This creates an opportunity of “diurnal smoothing”. At a given separation distance the hourly wind speeds correlation is reduced for those pairs that have a difference of +/- 12 hours in local time of wind maximum. This effect is more prominent for location pairs separated by 200 km or more and where the amplitude of the diurnal cycle is more than about  0.5 m/s. “Diurnal smoothing” also has a positive impact on the aggregate wind predictability and forecast error. “Diurnal smoothing” could also be important for other regions with diurnal wind speed cycles.</p>

scholarly journals Wind speed response of marine non-precipitating stratocumulus clouds over a diurnal cycle in cloud-system resolving simulations

2016 ◽  
Vol 16 (9) ◽  
pp. 5811-5839 ◽  
Author(s):  
Jan Kazil ◽  
Graham Feingold ◽  
Takanobu Yamaguchi
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Large Scale ◽  
Layer Growth ◽  
Radiative Properties ◽  
Cloud Base ◽  
Latent Heat Release ◽  
Marine Stratocumulus ◽  
Stratocumulus Clouds ◽  
Boundary Layer Growth

Abstract. Observed and projected trends in large-scale wind speed over the oceans prompt the question: how do marine stratocumulus clouds and their radiative properties respond to changes in large-scale wind speed? Wind speed drives the surface fluxes of sensible heat, moisture, and momentum and thereby acts on cloud liquid water path (LWP) and cloud radiative properties. We present an investigation of the dynamical response of non-precipitating, overcast marine stratocumulus clouds to different wind speeds over the course of a diurnal cycle, all else equal. In cloud-system resolving simulations, we find that higher wind speed leads to faster boundary layer growth and stronger entrainment. The dynamical driver is enhanced buoyant production of turbulence kinetic energy (TKE) from latent heat release in cloud updrafts. LWP is enhanced during the night and in the morning at higher wind speed, and more strongly suppressed later in the day. Wind speed hence accentuates the diurnal LWP cycle by expanding the morning–afternoon contrast. The higher LWP at higher wind speed does not, however, enhance cloud top cooling because in clouds with LWP ⪆ 50 g m−2, longwave emissions are insensitive to LWP. This leads to the general conclusion that in sufficiently thick stratocumulus clouds, additional boundary layer growth and entrainment due to a boundary layer moistening arises by stronger production of TKE from latent heat release in cloud updrafts, rather than from enhanced longwave cooling. We find that large-scale wind modulates boundary layer decoupling. At nighttime and at low wind speed during daytime, it enhances decoupling in part by faster boundary layer growth and stronger entrainment and in part because shear from large-scale wind in the sub-cloud layer hinders vertical moisture transport between the surface and cloud base. With increasing wind speed, however, in decoupled daytime conditions, shear-driven circulation due to large-scale wind takes over from buoyancy-driven circulation in transporting moisture from the surface to cloud base and thereby reduces decoupling and helps maintain LWP. The total (shortwave + longwave) cloud radiative effect (CRE) responds to changes in LWP and cloud fraction, and higher wind speed translates to a stronger diurnally averaged total CRE. However, the sensitivity of the diurnally averaged total CRE to wind speed decreases with increasing wind speed.

Sign in / Sign up

Export Citation Format

Share Document