scholarly journals Fibrin gels and their clinical and bioengineering applications

2008 ◽  
Vol 6 (30) ◽  
pp. 1-10 ◽  
Author(s):  
Paul A Janmey ◽  
Jessamine P Winer ◽  
John W Weisel
Keyword(s):  
Mechanical Properties ◽  
Wound Healing ◽  
Cell Migration ◽  
Network Architecture ◽  
Blood Clotting ◽  
Reaction Conditions ◽  
Fibrin Gels ◽  
Physiological Conditions ◽  
Small Strains ◽  
Fibrin Network

Fibrin gels, prepared from fibrinogen and thrombin, the key proteins involved in blood clotting, were among the first biomaterials used to prevent bleeding and promote wound healing. The unique polymerization mechanism of fibrin, which allows control of gelation times and network architecture by variation in reaction conditions, allows formation of a wide array of soft substrates under physiological conditions. Fibrin gels have been extensively studied rheologically in part because their nonlinear elasticity, characterized by soft compliance at small strains and impressive stiffening to resist larger deformations, appears essential for their function as haemostatic plugs and as matrices for cell migration and wound healing. The filaments forming a fibrin network are among the softest in nature, allowing them to deform to large extents and stiffen but not break. The biochemical and mechanical properties of fibrin have recently been exploited in numerous studies that suggest its potential for applications in medicine and bioengineering.

scholarly journals Anomalous mechanics of Zn2+-modified fibrin networks

2021 ◽  
Vol 118 (10) ◽  
pp. e2020541118
Author(s):  
Jing Xia ◽  
Li-Heng Cai ◽  
Huayin Wu ◽  
Frederick C. MacKintosh ◽  
David A. Weitz
Keyword(s):  
Mechanical Properties ◽  
Network Structure ◽  
Divalent Cations ◽  
High Stress ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Fibrin Gels ◽  
Loosely Coupled ◽  
Fibrin Network ◽  
Main Component

Fibrin is the main component of blood clots. The mechanical properties of fibrin are therefore of critical importance in successful hemostasis. One of the divalent cations released by platelets during hemostasis is Zn2+; however, its effect on the network structure of fibrin gels and on the resultant mechanical properties remains poorly understood. Here, by combining mechanical measurements with three-dimensional confocal microscopy imaging, we show that Zn2+ can tune the fibrin network structure and alter its mechanical properties. In the presence of Zn2+, fibrin protofibrils form large bundles that cause a coarsening of the fibrin network due to an increase in fiber diameter and reduction of the total fiber length. We further show that the protofibrils in these bundles are loosely coupled to one another, which results in a decrease of the elastic modulus with increasing Zn2+ concentrations. We explore the elastic properties of these networks at both low and high stress: At low stress, the elasticity originates from pulling the thermal slack out of the network, and this is consistent with the thermal bending of the fibers. By contrast, at high stress, the elasticity exhibits a common master curve consistent with the stretching of individual protofibrils. These results show that the mechanics of a fibrin network are closely correlated with its microscopic structure and inform our understanding of the structure and physical mechanisms leading to defective or excessive clot stiffness.

Mikania micrantha mixed woven fabric for quick blood clotting and wound healing

2020 ◽  
Vol 6 (5) ◽  
Author(s):  
Shaikh Md Mominul Alam ◽  
Shilpi Akter ◽  
Md Lutfor Rahman
Keyword(s):  
Wound Healing ◽  
Blood Clotting ◽  
Woven Fabric ◽  
Excessive Bleeding ◽  
Sustainable Operations ◽  
Environment Friendly ◽  
Mikania Micrantha ◽  
Leaf Powder ◽  
Medical Textile ◽  
Dressing Materials

The aim of this paper is to introduce novel dressing with Mikania Micrantha for quick blood clotting and wound healing. When epidermis of human skin is cut or scrapped, sometimes too much bleeding occurs. Excessive bleeding may cause death, if bleeding is not stopped immediately. To promote blood clotting & wound healing natural based bio materials are still insufficient in medical textile sector. To fill up this scarcity, woven fabric treated with Mikania micrantha leaf juice & leaf powder was examined. M. micrantha exhibits good blood clotting time in comparison with available dressing materials. Woven fabric (bandage) that contains M. micrantha can be used for cut wounds healing purpose. The experiments were carried out in environment friendly way which indicates the production & processing of these dressing materials can have enormous contribution to sustainable operations and products.

Dynamics of Nanoparticle Chain Aggregates of Carbon Under Tension

2003 ◽  
Vol 778 ◽  
Author(s):  
Rajdip Bandyopadhyaya ◽  
Weizhi Rong ◽  
Yong J. Suh ◽  
Sheldon K. Friedlander
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Polymer Film ◽  
Elastic Behavior ◽  
Small Strains ◽  
Transmission Electron ◽  
Chain Aggregates ◽  
Nanoparticle Chains ◽  
Reinforcing Filler

AbstractCarbon black in the form of nanoparticle chains is used as a reinforcing filler in elastomers. However, the dynamics of the filler particles under tension and their role in the improvement of the mechanical properties of rubber are not well understood. We have studied experimentally the dynamics of isolated nanoparticle chain aggregates (NCAs) of carbon made by laser ablation, and also that of carbon black embedded in a polymer film. In situ studies of stretching and contraction of such chains in the transmission electron microscope (TEM) were conducted under different maximum values of strain. Stretching causes initially folded NCA to reorganize into a straight, taut configuration. Further stretching leads to either plastic deformation and breakage (at 37.4% strain) or to a partial elastic behavior of the chain at small strains (e.g. 2.3% strain). For all cases the chains were very flexible under tension. Similar reorientation and stretching was observed for carbon black chains embedded in a polymer film. Such flexible and elastic nature of NCAs point towards a possible mechanism of reinforcement of rubber by carbon black fillers.

A Photoactivable Formaldehyde Donor with Fluorescence Monitoring Reveals Threshold to Arrest Cell Migration

2019 ◽  
Author(s):  
Lukas P Smaga ◽  
Nicholas W Pino ◽  
Gabriela E Ibarra ◽  
Vishnu Krishnamurthy ◽  
Jefferson Chan
Keyword(s):  
Wound Healing ◽  
Cell Migration ◽  
Fluorescence Enhancement ◽  
Biological Effects ◽  
Cellular Systems ◽  
Live Cells ◽  
First Report ◽  
Cell Lysate ◽  
Intracellular Release ◽  
Biological Analytes

Controlled light-mediated delivery of biological analytes enables the investigation of highly reactivity molecules within cellular systems. As many biological effects are concentration dependent, it is critical to determine the location, time, and quantity of analyte donation. In this work, we have developed the first photoactivatable donor for formaldehyde (FA). Our optimized photoactivatable donor, photoFAD-3, is equipped with a fluorescence readout that enables monitoring of FA release with a concomitant 139-fold fluorescence enhancement. Tuning of photostability and cellular retention enabled quantification of intracellular FA release through cell lysate calibration. Application of photoFAD-3 uncovered the concentration range necessary for arresting wound healing in live cells. This marks the first report where a photoactivatable donor for any analyte has been used to quantify intracellular release.

scholarly journals Fabrication of Hybrid Nanofibers from Biopolymers and Poly (Vinyl Alcohol)/Poly (ε-Caprolactone) for Wound Dressing Applications

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2104
Author(s):  
Sibusiso Alven ◽  
Blessing Atim Aderibigbe
Keyword(s):  
Mechanical Properties ◽  
Wound Healing ◽  
Vinyl Alcohol ◽  
Wound Dressing ◽  
Chronic Wounds ◽  
Cellular Adhesion ◽  
Wound Dressings ◽  
Poly Vinyl Alcohol ◽  
High Porosity ◽  
Hybrid Nanofibers

The management of chronic wounds is challenging. The factors that impede wound healing include malnutrition, diseases (such as diabetes, cancer), and bacterial infection. Most of the presently utilized wound dressing materials suffer from severe limitations, including poor antibacterial and mechanical properties. Wound dressings formulated from the combination of biopolymers and synthetic polymers (i.e., poly (vinyl alcohol) or poly (ε-caprolactone) display interesting properties, including good biocompatibility, improved biodegradation, good mechanical properties and antimicrobial effects, promote tissue regeneration, etc. Formulation of these wound dressings via electrospinning technique is cost-effective, useful for uniform and continuous nanofibers with controllable pore structure, high porosity, excellent swelling capacity, good gaseous exchange, excellent cellular adhesion, and show a good capability to provide moisture and warmth environment for the accelerated wound healing process. Based on the above-mentioned outstanding properties of nanofibers and the unique properties of hybrid wound dressings prepared from poly (vinyl alcohol) and poly (ε-caprolactone), this review reports the in vitro and in vivo outcomes of the reported hybrid nanofibers.

scholarly journals Hierarchical modeling of mechano-chemical dynamics of epithelial sheets across cells and tissue

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yoshifumi Asakura ◽  
Yohei Kondo ◽  
Kazuhiro Aoki ◽  
Honda Naoki
Keyword(s):  
Wound Healing ◽  
Cell Migration ◽  
Continuum Model ◽  
Tissue Level ◽  
Chemical Signals ◽  
Cellular Level ◽  
Mathematical Framework ◽  
Collective Cell Migration ◽  
The Continuum ◽  
Cell Cell

AbstractCollective cell migration is a fundamental process in embryonic development and tissue homeostasis. This is a macroscopic population-level phenomenon that emerges across hierarchy from microscopic cell-cell interactions; however, the underlying mechanism remains unclear. Here, we addressed this issue by focusing on epithelial collective cell migration, driven by the mechanical force regulated by chemical signals of traveling ERK activation waves, observed in wound healing. We propose a hierarchical mathematical framework for understanding how cells are orchestrated through mechanochemical cell-cell interaction. In this framework, we mathematically transformed a particle-based model at the cellular level into a continuum model at the tissue level. The continuum model described relationships between cell migration and mechanochemical variables, namely, ERK activity gradients, cell density, and velocity field, which could be compared with live-cell imaging data. Through numerical simulations, the continuum model recapitulated the ERK wave-induced collective cell migration in wound healing. We also numerically confirmed a consistency between these two models. Thus, our hierarchical approach offers a new theoretical platform to reveal a causality between macroscopic tissue-level and microscopic cellular-level phenomena. Furthermore, our model is also capable of deriving a theoretical insight on both of mechanical and chemical signals, in the causality of tissue and cellular dynamics.

scholarly journals Role of carbon and nitrogen in the improvement of corrosion resistance of new powder metallurgy Co-Cr-Mo alloys

2020 ◽  
Vol 38 (3) ◽  
pp. 273-286 ◽  
Author(s):  
Cristina Garcia-Cabezon ◽  
Celia Garcia-Hernandez ◽  
Maria L. Rodriguez-Mendez ◽  
Gemma Herranz ◽  
Fernando Martin-Pedrosa
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Nitrogen Content ◽  
Powder Metallurgy Technique ◽  
Carbon And Nitrogen ◽  
Physiological Conditions ◽  
Carbon And Nitrogen Content ◽  
Astm F75

AbstractMicrostructural changes that result in relevant improvements in mechanical properties and electrochemical behavior can be induced using different sintering conditions of ASTM F75 cobalt alloys during their processing using powder metallurgy technique. It has been observed that the increase in carbon and nitrogen content improves corrosion resistance and mechanical properties as long as the precipitation of carbides and nitrides is avoided, thanks to the use of rapid cooling in water after the sintering stage. In addition, the reduction of the particle size of the powder improves hardness and resistance to corrosion in both acid medium with chlorides and phosphate-buffered medium that simulates the physiological conditions for its use as a biomaterial. These results lead to increased knowledge of the role of carbon and nitrogen content in the behavior displayed by the different alloys studied.

scholarly journals Investigation of the biological activity, mechanical properties and wound healing application of a novel scaffold based on lignin–agarose hydrogel and silk fibroin embedded zinc chromite nanoparticles

RSC Advances ◽  
2021 ◽  
Vol 11 (29) ◽  
pp. 17914-17923
Author(s):  
Reza Eivazzadeh-Keihan ◽  
Hooman Aghamirza Moghim Aliabadi ◽  
Fateme Radinekiyan ◽  
Mohammad Sobhani ◽  
Farzane khalili ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Wound Healing ◽  
Biological Activity ◽  
Silk Fibroin ◽  
Agarose Hydrogel ◽  
Novel Scaffold ◽  
Fibroin Solution ◽  
Zinc Chromite

Given the important aspects of wound healing approaches, in this work, an innovative biocompatible nanobiocomposite scaffold was designed and prepared based on cross-linked lignin–agarose hydrogel, extracted silk fibroin solution, and zinc chromite (ZnCr2O4) nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document