scholarly journals The wake of hovering flight in bats

2015 ◽  
Vol 12 (109) ◽  
pp. 20150357 ◽  
Author(s):  
Jonas Håkansson ◽  
Anders Hedenström ◽  
York Winter ◽  
L. Christoffer Johansson
Keyword(s):  
High Speed ◽  
Time History ◽  
Energy Conversion Efficiency ◽  
Flapping Flight ◽  
Stereoscopic Particle Image Velocimetry ◽  
Hovering Flight ◽  
Time Resolved ◽  
Nectar Feeding ◽  
Weight Support ◽  
Mechanical Power Output

Hovering means stationary flight at zero net forward speed, which can be achieved by animals through muscle powered flapping flight. Small bats capable of hovering typically do so with a downstroke in an inclined stroke plane, and with an aerodynamically active outer wing during the upstroke. The magnitude and time history of aerodynamic forces should be reflected by vorticity shed into the wake. We thus expect hovering bats to generate a characteristic wake, but this has until now never been studied. Here we trained nectar-feeding bats, Leptonycteris yerbabuenae , to hover at a feeder and using time-resolved stereoscopic particle image velocimetry in conjunction with high-speed kinematic analysis we show that hovering nectar-feeding bats produce a series of bilateral stacked vortex loops. Vortex visualizations suggest that the downstroke produces the majority of the weight support, but that the upstroke contributes positively to the lift production. However, the relative contributions from downstroke and upstroke could not be determined on the basis of the wake, because wake elements from down- and upstroke mix and interact. We also use a modified actuator disc model to estimate lift force, power and flap efficiency. Based on our quantitative wake-induced velocities, the model accounts for weight support well (108%). Estimates of aerodynamic efficiency suggest hovering flight is less efficient than forward flapping flight, while the overall energy conversion efficiency (mechanical power output/metabolic power) was estimated at 13%.

Re-Oriented POD for Feature Extraction From Time Resolved Reacting Flow Datasets

2019 ◽  
Author(s):  
H. Ek ◽  
W. Proscia ◽  
T. Lieuwen ◽  
B. Emerson
Keyword(s):  
High Speed ◽  
Stereoscopic Particle Image Velocimetry ◽  
Phase Portraits ◽  
Quality Data ◽  
Reacting Flow ◽  
Axial Distance ◽  
Swirl Combustor ◽  
Time Resolved ◽  
Convective Structures ◽  
Types Of Information

Abstract Recent improvements in computational and experimental combustion have led to an increased availability of high-fidelity data sets. With the surge of high-quality data, the reduction and analysis of this information become a key aspect in improving our understanding of highly dynamic, reacting flow fields. This work utilizes simultaneous high-speed stereoscopic particle image velocimetry (sPIV), OH-planar laser induced fluorescence (PLIF) and fuel-PLIF measurements in a high pressure, liquid fueled swirl combustor. This work extends one of the most commonly used modal analysis techniques, proper orthogonal decomposition (POD). Instead of decomposing the data as a series of time coefficients and spatial modes, which is the result of snap-shot POD, the data is re-oriented such that the coefficients are a function of the transverse distance and the modes are a function of axial distance and time. This reoriented POD method, referred to as spatio-temporal POD, allows us to directly target convective flow structures while still extracting the same types of information as from snap-shot POD. Additionally, since the modes contain temporal information, phase speeds associated with the convective structures can easily be calculated from the phase portraits. This paper presents results of this analysis, allowing us to track the growth of coherent structures, their phase speeds, and their subsequent decay.

Time-Resolved Spectroscopic Studies of Exploding Wires in Controlled Atmospheres

1967 ◽  
Vol 21 (6) ◽  
pp. 360-364 ◽  
Author(s):  
Esther C. Cassidy ◽  
Stanley Abramowitz
Keyword(s):  
Molecular Species ◽  
High Speed ◽  
Time History ◽  
Spectroscopic Studies ◽  
Spectroscopic Technique ◽  
Time Resolved ◽  
Exploding Wires ◽  
Controlled Atmospheres ◽  
History Of

A spectroscopic technique for continuous and time-resolved study of the atomic and molecular species produced by electrically exploded wires is described. A high-speed drum camera is utilized to record the time history of the explosion spectrum. More detailed studies (from photographic plates) of the spectrum at selected times are then conducted by use of a rotating shutter. Results are presented from experiments with aluminum wires exploded in various controlled atmospheres.

Multiple phase transitions investigated by high-speed TEM

1990 ◽  
Vol 48 (4) ◽  
pp. 550-551
Author(s):  
Oleg Bostanjoglo ◽  
Peter Thomsen-Schmidt
Keyword(s):  
Phase Transitions ◽  
High Speed ◽  
Short Exposure ◽  
Semiconductor Film ◽  
Time Resolved ◽  
Short Exposure Time ◽  
Multiple Phase ◽  
Model Substance ◽  
History Of ◽  
Electron Image

Thin GexTe1-x (x = 0.15-0.8) were studied as a model substance of a composite semiconductor film, in addition being of interest for optical storage material. Two complementary modes of time-resolved TEM were used to trace the phase transitions, induced by an attached Q-switched (50 ns FWHM) and frequency doubled (532 nm) Nd:YAG laser. The laser radiation was focused onto the specimen within the TEM to a 20 μm spot (FWHM). Discrete intermediate states were visualized by short-exposure time doubleframe imaging /1,2/. The full history of a transformation was gained by tracking the electron image intensity with photomultiplier and storage oscilloscopes (space/time resolution 100 nm/3 ns) /3/. In order to avoid radiation damage by the probing electron beam to detector and specimen, the beam is pulsed in this continuous mode of time-resolved TEM,too.Short events ( <2 μs) are followed by illuminating with an extended single electron pulse (fig. 1c)

scholarly journals Dual-shot dynamics and ultimate frequency of all-optical magnetic recording on GdFeCo

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Sicong Wang ◽  
Chen Wei ◽  
Yuanhua Feng ◽  
Hongkun Cao ◽  
Wenzhe Li ◽  
...  
Keyword(s):  
Magnetization Reversal ◽  
Energy Efficient ◽  
High Speed ◽  
Data Transfer ◽  
Laser Pulses ◽  
Time Resolved ◽  
All Optical ◽  
Fs Laser ◽  
High Speed Data ◽  
Natural Way

AbstractAlthough photonics presents the fastest and most energy-efficient method of data transfer, magnetism still offers the cheapest and most natural way to store data. The ultrafast and energy-efficient optical control of magnetism is presently a missing technological link that prevents us from reaching the next evolution in information processing. The discovery of all-optical magnetization reversal in GdFeCo with the help of 100 fs laser pulses has further aroused intense interest in this compelling problem. Although the applicability of this approach to high-speed data processing depends vitally on the maximum repetition rate of the switching, the latter remains virtually unknown. Here we experimentally unveil the ultimate frequency of repetitive all-optical magnetization reversal through time-resolved studies of the dual-shot magnetization dynamics in Gd27Fe63.87Co9.13. Varying the intensities of the shots and the shot-to-shot separation, we reveal the conditions for ultrafast writing and the fastest possible restoration of magnetic bits. It is shown that although magnetic writing launched by the first shot is completed after 100 ps, a reliable rewriting of the bit by the second shot requires separating the shots by at least 300 ps. Using two shots partially overlapping in space and minimally separated by 300 ps, we demonstrate an approach for GHz magnetic writing that can be scaled down to sizes below the diffraction limit.

scholarly journals Detonation effects of shallow buried explosive in sandy soil on target plate acceleration in a small-scale blast test

2018 ◽  
Vol 192 ◽  
pp. 02028
Author(s):  
Hassan Zulkifli Abu ◽  
Ibrahim Aniza ◽  
Mohamad Nor Norazman
Keyword(s):  
Sandy Soil ◽  
High Speed ◽  
Early Stage ◽  
Time History ◽  
Video Camera ◽  
Small Scale ◽  
Target Plate ◽  
Air Blast ◽  
High Speed Video Camera ◽  
The Impact

Small-scale blast tests were carried out to observe and measure the influence of sandy soil towards explosive blast intensity. The tests were to simulate blast impact imparted by anti-vehicular landmine to a lightweight armoured vehicle (LAV). Time of occurrence of the three phases of detonation phase in soil with respect to upward translation time of the test apparatus were recorded using high-speed video camera. At the same time the target plate acceleration was measured using shock accelerometer. It was observed that target plate deformation took place at early stage of the detonation phase before the apparatus moved vertically upwards. Previous data of acceleration-time history and velocity-time history from air blast detonation were compared. It was observed that effects of soil funnelling on blast wave together with the impact from soil ejecta may have contributed to higher blast intensity that characterized detonation in soil, where detonation in soil demonstrated higher plate velocity compared to what occurred in air blast detonation.

Detector commissioning and development for PETRA-III

2010 ◽  
Vol 1 (SRMS-7) ◽  
Author(s):  
David Pennicard ◽  
Heinz Graafsma ◽  
Michael Lohmann
Keyword(s):  
High Speed ◽  
Materials Science ◽  
Dynamic Range ◽  
Photon Counting ◽  
High Energy ◽  
X Rays ◽  
Silicon Detectors ◽  
Time Resolved ◽  
Wide Range ◽  
Synchrotron Light

The new synchrotron light source PETRA-III produced its first beam last year. The extremely high brilliance of PETRA-III and the large energy range of many of its beamlines make it useful for a wide range of experiments, particularly in materials science. The detectors at PETRA-III will need to meet several requirements, such as operation across a wide dynamic range, high-speed readout and good quantum efficiency even at high photon energies. PETRA-III beamlines with lower photon energies will typically be equipped with photon-counting silicon detectors for two-dimensional detection and silicon drift detectors for spectroscopy and higher-energy beamlines will use scintillators coupled to cameras or photomultiplier tubes. Longer-term developments include ‘high-Z’ semiconductors for detecting high-energy X-rays, photon-counting readout chips with smaller pixels and higher frame rates and pixellated avalanche photodiodes for time-resolved experiments.

Time-Resolved Micro Liquid Desorption Mass Spectrometry: Mechanism, Features, and Kinetic Applications

2006 ◽  
Vol 59 (2) ◽  
pp. 81 ◽  
Author(s):  
Ales Charvat ◽  
Andreas Bógehold ◽  
Bernd Abel
Keyword(s):  
Mass Spectrometry ◽  
Liquid Phase ◽  
High Speed ◽  
High Performance ◽  
Kinetic Studies ◽  
Solution Concentration ◽  
Bulk Water ◽  
Laser Wavelength ◽  
Time Resolved ◽  
Desorption Mass Spectrometry

Liquid water beam desorption mass spectrometry is an intriguing technique to isolate charged molecular aggregates directly from the liquid phase and to analyze them employing sensitive mass spectrometry. The liquid phase in this approach consists of a 10 µm diameter free liquid filament in vacuum which is irradiated by a focussed infrared laser pulse resonant with the OH-stretch vibration of bulk water. Depending upon the laser wavelength, charged (e.g. protonated) macromolecules are isolated from solution through a still poorly characterized mechanism. After the gentle liquid-to-vacuum transfer the low-charge-state aggregates are analyzed using time-of-flight mass spectrometry. A recent variant of the technique uses high performance liquid chromatography valves for local liquid injections of samples in the liquid carrier beam, which enables very low sample consumption and high speed sample analysis. In this review we summarize recent work to characterize the ‘desorption’ or ion isolation mechanism in this type of experiment. A decisive and interesting feature of micro liquid beam desorption mass spectrometry is that — under certain conditions — the gas-phase mass signal for a large number of small as well as supramolecular systems displays a surprisingly linear response on the solution concentration over many orders of magnitude, even for mixtures and complex body fluids. This feature and the all-liquid state nature of the technique makes this technique a solution-type spectroscopy that enables real kinetic studies involving (bio)polymers in solution without the need for internal standards. Two applications of the technique monitoring enzyme digestion of proteins and protein aggregation of an amyloid model system are highlighted, both displaying its potential for monitoring biokinetics in solution.

Diesel Droplet Diffusion in Isotropic Turbulence With Digital Holographic Cinematography

2005 ◽  
Author(s):  
Balaji Gopalan ◽  
Edwin Malkiel ◽  
Jian Sheng ◽  
Joseph Katz
Keyword(s):  
Time Series ◽  
High Speed ◽  
Isotropic Turbulence ◽  
Fluid Motion ◽  
Three Dimensional ◽  
Time History ◽  
Sample Volume ◽  
Velocity Autocorrelation Function ◽  
Digital Cameras ◽  
Velocity Autocorrelation

High-speed in-line digital holographic cinematography was used to investigate the diffusion of droplets in locally isotropic turbulence. Droplets of diesel fuel (0.3–0.9mm diameter, specific gravity of 0.85) were injected into a 37×37×37mm3 sample volume located in the center of a 160-liter tank. The turbulence was generated by 4 spinning grids, located symmetrically in the corners of the tank, and was characterized prior to the experiments. The sample volume was back illuminated with two perpendicular collimated beams of coherent laser light and time series of in-line holograms were recorded with two high-speed digital cameras at 500 frames/sec. Numerical reconstruction generated a time series of high-resolution images of the droplets throughout the sample volume. We developed an algorithm for automatically detecting the droplet trajectories from each view, for matching the two views to obtain the three-dimensional tracks, and for calculating the time history of velocity. We also measured the mean fluid motion using 2-D PIV. The data enabled us to calculate the Lagrangian velocity autocorrelation function.

Sign in / Sign up

Export Citation Format

Share Document