scholarly journals Raman spectroscopy as a tool for ecology and evolution

2017 ◽  
Vol 14 (131) ◽  
pp. 20170174 ◽  
Author(s):  
Arno Germond ◽  
Vipin Kumar ◽  
Taro Ichimura ◽  
Jerome Moreau ◽  
Chikara Furusawa ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Low Cost ◽  
Biological Systems ◽  
Spectral Information ◽  
Selective Pressures ◽  
Biological Features ◽  
Microscopy Technique ◽  
Pragmatic Aspects ◽  
Non Destructive

Scientists are always on the lookout for new modalities of information which could reveal new biological features that are useful for deciphering the complexity of biological systems. Here, we introduce Raman spectroscopy as a prime candidate for ecology and evolution. To encourage the integration of this microscopy technique in the field of ecology and evolution, it is crucial to discuss first how Raman spectroscopy fits within the conceptual, technical and pragmatic considerations of ecology and evolution. In this paper, we show that the spectral information holds reliable indicators of intra- and interspecies variations, which can be related to the environment, selective pressures and fitness. Moreover, we show how the technical and pragmatic aspects of this modality (non-destructive, non-labelling, speed, relative low cost, etc.) enable it to be combined with more conventional methodologies. With this paper, we hope to open new avenues of research and extend the scope of available methodologies used in ecology and evolution.

scholarly journals Microcavity Enhanced Raman Spectroscopy of Fullerene C60 Bucky Balls

Sensors ◽  
2020 ◽  
Vol 20 (5) ◽  
pp. 1470 ◽  
Author(s):  
Vinayaka H. Damle ◽  
Miri Sinwani ◽  
Hagit Aviv ◽  
Yaakov R. Tischler
Keyword(s):  
Raman Spectroscopy ◽  
Low Cost ◽  
Spectroscopic Characterization ◽  
Low Energy ◽  
Cavity Resonance ◽  
Raman Spectroscopic ◽  
Raman Enhancement ◽  
Raman Modes ◽  
Selective Enhancement ◽  
Non Destructive

Raman spectroscopy is a widely used characterization technique in material science. It is a non-destructive tool with relatively simple instrumentation, and provides intrinsic qualitative information of analytes by probing their vibrational modes. In many cases, Raman enhancement is essential for detecting low-intensity signals in high-noise environments, spectrally unresolved features, and hidden modes. Here we present optical and Raman spectroscopic characterization of fullerene C 60 in a gold microcavity. The fabrication of single-layered gold mirrors is facile, low cost and direct but was proven to give considerably significant enhancement. The findings of this work demonstrate the cavity resonance as a powerful tool in obtaining tunability over individual peak for selective enhancement in the tuned spectral range. The PL of the material within the cavity has demonstrated a red shift assumed to be caused by the low-energy transitions. These transitions are induced by virtual low-energy states generated by the cavity. We further observe that adopting this principle enables resolution of active Raman modes that until now were unobserved. Finally, we assigned the new experimentally observed modes to the corresponding motions calculated by DFT.

Fault Localization of Power-Ground Short via Signal Injection and Oscilloscope Technique

2010 ◽  
Author(s):  
Binh Nguyen
Keyword(s):  
Low Cost ◽  
Short Circuit ◽  
Fault Localization ◽  
Fault Isolation ◽  
Test Apparatus ◽  
Good Working ◽  
Signal Injection ◽  
Set Up ◽  
Non Destructive ◽  
Short Circuit Condition

Abstract For those attempting fault isolation on computer motherboard power-ground short issues, the optimal technique should utilize existing test equipment available in the debug facility, requiring no specialty equipment as well as needing a minimum of training to use effectively. The test apparatus should be both easy to set up and easy to use. This article describes the signal injection and oscilloscope technique which meets the above requirements. The signal injection and oscilloscope technique is based on the application of Ohm's law in a short-circuit condition. Two experiments were conducted to prove the effectiveness of these techniques. Both experiments simulate a short-circuit condition on the VCC3 power rail of a good working PC motherboard and then apply the signal injection and oscilloscope technique to localize the short. The technique described is a simple, low cost and non-destructive method that helps to find the location of the power-ground short quickly and effectively.

scholarly journals The grades and freshness assessment of eggs based on density detection using machine vision and weighing sensor

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Supakorn Harnsoongnoen ◽  
Nuananong Jaroensuk
Keyword(s):  
Machine Vision ◽  
Vision System ◽  
Low Cost ◽  
Measuring System ◽  
Coefficient Of Determination ◽  
Water Displacement ◽  
Non Invasive ◽  
Future Potential ◽  
Non Destructive ◽  
Egg Freshness

AbstractThe water displacement and flotation are two of the most accurate and rapid methods for grading and assessing freshness of agricultural products based on density determination. However, these techniques are still not suitable for use in agricultural inspections of products such as eggs that absorb water which can be considered intrusive or destructive and can affect the result of measurements. Here we present a novel proposal for a method of non-destructive, non-invasive, low cost, simple and real—time monitoring of the grading and freshness assessment of eggs based on density detection using machine vision and a weighing sensor. This is the first proposal that divides egg freshness into intervals through density measurements. The machine vision system was developed for the measurement of external physical characteristics (length and breadth) of eggs for evaluating their volume. The weighing system was developed for the measurement of the weight of the egg. Egg weight and volume were used to calculate density for grading and egg freshness assessment. The proposed system could measure the weight, volume and density with an accuracy of 99.88%, 98.26% and 99.02%, respectively. The results showed that the weight and freshness of eggs stored at room temperature decreased with storage time. The relationship between density and percentage of freshness was linear for the all sizes of eggs, the coefficient of determination (R2) of 0.9982, 0.9999, 0.9996, 0.9996 and 0.9994 for classified egg size classified 0, 1, 2, 3 and 4, respectively. This study shows that egg freshness can be determined through density without using water to test for water displacement or egg flotation which has future potential as a measuring system important for the poultry industry.

scholarly journals Use of WetSEM® capsules for convenient multimodal scanning electron microscopy, energy dispersive X-ray analysis, and micro Raman spectroscopy characterisation of technetium oxides

2021 ◽  
Author(s):  
D. J. Bailey ◽  
M. C. Stennett ◽  
J. Heo ◽  
N. C. Hyatt
Keyword(s):  
Raman Spectroscopy ◽  
Low Cost ◽  
Powder Materials ◽  
Spectroscopy Analysis ◽  
X Ray ◽  
Micro Raman Spectroscopy ◽  
Hazard And Risk ◽  
Sem Imaging ◽  
General User ◽  
532 Nm

AbstractSEM–EDX and Raman spectroscopy analysis of radioactive compounds is often restricted to dedicated instrumentation, within radiological working areas, to manage the hazard and risk of contamination. Here, we demonstrate application of WetSEM® capsules for containment of technetium powder materials, enabling routine multimodal characterisation with general user instrumentation, outside of a controlled radiological working area. The electron transparent membrane of WetSEM® capsules enables SEM imaging of submicron non-conducting technetium powders and acquisition of Tc Lα X-ray emission, using a low cost desktop SEM–EDX system, as well as acquisition of good quality μ-Raman spectra using a 532 nm laser.

scholarly journals Feasibility of Using VIS/NIR Spectroscopy and Multivariate Analysis for Pesticide Residue Detection in Tomatoes

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 196
Author(s):  
Araz Soltani Nazarloo ◽  
Vali Rasooli Sharabiani ◽  
Yousef Abbaspour Gilandeh ◽  
Ebrahim Taghinezhad ◽  
Mariusz Szymanek ◽  
...  
Keyword(s):  
Near Infrared ◽  
Cross Validation ◽  
Low Cost ◽  
Moving Average ◽  
Nir Spectroscopy ◽  
Control Treatment ◽  
Residue Detection ◽  
Non Destructive ◽  
Reflective Spectroscopy

The purpose of this work was to investigate the detection of the pesticide residual (profenofos) in tomatoes by using visible/near-infrared spectroscopy. Therefore, the experiments were performed on 180 tomato samples with different percentages of profenofos pesticide (higher and lower values than the maximum residual limit (MRL)) as compared to the control (no pesticide). VIS/near infrared (NIR) spectral data from pesticide solution and non-pesticide tomato samples (used as control treatment) impregnated with different concentrations of pesticide in the range of 400 to 1050 nm were recorded by a spectrometer. For classification of tomatoes with pesticide content at lower and higher levels of MRL as healthy and unhealthy samples, we used different spectral pre-processing methods with partial least squares discriminant analysis (PLS-DA) models. The Smoothing Moving Average pre-processing method with the standard error of cross validation (SECV) = 4.2767 was selected as the best model for this study. In addition, in the calibration and prediction sets, the percentages of total correctly classified samples were 90 and 91.66%, respectively. Therefore, it can be concluded that reflective spectroscopy (VIS/NIR) can be used as a non-destructive, low-cost, and rapid technique to control the health of tomatoes impregnated with profenofos pesticide.

scholarly journals High spatial resolution photo mosaicking for the monitoring of coralligenous reefs

Coral Reefs ◽  
2021 ◽  
Author(s):  
E. Casoli ◽  
D. Ventura ◽  
G. Mancini ◽  
D. S. Pace ◽  
A. Belluscio ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
High Spatial Resolution ◽  
Low Cost ◽  
Pixel Resolution ◽  
Recording Apparatus ◽  
Assemblage Composition ◽  
Very High Spatial Resolution ◽  
Vertical Walls ◽  
Non Destructive ◽  
Very High

AbstractCoralligenous reefs are characterized by large bathymetric and spatial distribution, as well as heterogeneity; in shallow environments, they develop mainly on vertical and sub-vertical rocky walls. Mainly diver-based techniques are carried out to gain detailed information on such habitats. Here, we propose a non-destructive and multi-purpose photo mosaicking method to study and monitor coralligenous reefs developing on vertical walls. High-pixel resolution images using three different commercial cameras were acquired on a 10 m2 reef, to compare the effectiveness of photomosaic method to the traditional photoquadrats technique in quantifying the coralligenous assemblage. Results showed very high spatial resolution and accuracy among the photomosaic acquired with different cameras and no significant differences with photoquadrats in assessing the assemblage composition. Despite the large difference in costs of each recording apparatus, little differences emerged from the assemblage characterization: through the analysis of the three photomosaics twelve taxa/morphological categories covered 97–99% of the sampled surface. Photo mosaicking represents a low-cost method that minimizes the time spent underwater by divers and capable of providing new opportunities for further studies on shallow coralligenous reefs.

scholarly journals Bimetallic Core–Shell Nanoparticles of Gold and Silver via Bioinspired Polydopamine Layer as Surface-Enhanced Raman Spectroscopy (SERS) Platform

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 688 ◽  
Author(s):  
Asli Yilmaz ◽  
Mehmet Yilmaz
Keyword(s):  
Raman Spectroscopy ◽  
Low Cost ◽  
Silver Ions ◽  
Surface Enhanced Raman Spectroscopy ◽  
Core Shell ◽  
Silver Deposition ◽  
Shell Nanoparticles ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Core Shell Nanoparticles

Despite numerous attempts to fabricate the core–shell nanoparticles, novel, simple, and low-cost approaches are still required to produce these efficient nanosystems. In this study, we propose the synthesis of bimetallic core–shell nanoparticles of gold (AuNP) and silver (AgNP) nanostructures via a bioinspired polydopamine (PDOP) layer and their employment as a surface-enhanced Raman spectroscopy (SERS) platform. Herein, the PDOP layer was used as an interface between nanostructures as well as stabilizing and reducing agents for the deposition of silver ions onto the AuNPs. UV-vis absorption spectra and electron microscope images confirmed the deposition of the silver ions and the formation of core–shell nanoparticles. SERS activity tests indicated that both the PDOP thickness and silver deposition time are the dominant parameters that determine the SERS performances of the proposed core–shell system. In comparison to bare AuNPs, more than three times higher SERS signal intensity was obtained with an enhancement factor of 3.5 × 105.

Physically Self-assembled Au Nanorod Arrays for SERS

2006 ◽  
Vol 951 ◽  
Author(s):  
Motofumi Suzuki ◽  
Kaoru Nakajima ◽  
Kenji Kimura ◽  
Takao Fukuoka ◽  
Yasushige Mori
Keyword(s):  
Raman Spectroscopy ◽  
Low Cost ◽  
Major Axis ◽  
Surface Enhanced Raman Spectroscopy ◽  
Nanorod Arrays ◽  
Au Nanorods ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Oblique Deposition ◽  
Selection Of

ABSTRACTWe have demonstrated surface-enhanced Raman spectroscopy on arrays of Au nanorods aligned in line by a dynamic oblique deposition technique. For the light polarized along the major axis of the nanorods, the plasma resonance of the Au nanorods has been tuned to a wavelength suitable for Raman spectroscopy. The Raman scattering on the discrete nanorods is enhanced significantly compared with that on semi continuous Au films. Since the preparation process is physically bottom-up, it is robust in its selection of the materials and is useful in providing the SERS sensors at low cost.

Optical Diagnostics of Microstructures Fabricated Using Quantum Well Intermixing

1999 ◽  
Vol 607 ◽  
Author(s):  
A. Saher Helmy ◽  
A.C. Bryce ◽  
C.N. Ironside ◽  
J.S. Aitchison ◽  
J.H. Marsh ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Quantum Well ◽  
Spatial Resolution ◽  
Optical Diagnostics ◽  
Complete Suppression ◽  
Quantum Well Intermixing ◽  
Spatially Resolved ◽  
Non Destructive ◽  
Insight Into ◽  
Free Vacancy

AbstractIn this paper we shall discuss techniques for accurate, non-destructive, optical characterisation of structures fabricated using quantum well intermixing (QWI). Spatially resolved photoluminescence and Raman spectroscopy were used to characterise the lateral bandgap profiles produced by impurity free vacancy disordering (IFVD) technology. Different features were used to examine the spatial resolution of the intermixing process. Features include 1:1 gratings as well as isolated stripes. From the measurements, the spatial selectivity of IFVD could be identified, and was found to be ∼4.5 μm, in contrast with the spatial resolution of the process of sputtering induced intermixing, which was found to be ∼2.5 μm. In addition, PL measurements on 1:1 gratings fabricated using IFVD show almost complete suppression of intermixing dielectric cap gratings with periods less than 10 microns. Finally, some insight into the limitations and merits of PL and Raman for the precision characterisation of QWI will be presented.

Sign in / Sign up

Export Citation Format

Share Document