The absorption spectrum of nitrosyl chloride

Although the photodecomposition of nitrosyl chloride has often been quoted as a typical photochemical reaction, there is considerable disagree ­ ment in the literature with regard to its exact mechanism. Early workers (Kiss 1923; Bowen and Sharpe 1925) found a quantum efficiency, γ , of 0.5 for the visual region, while Kistiakowsky (1930) found a value of 2. Quanta of wave-lengths shorter than 7600 A have sufficient energy to dissociate NOCl. Kistiakowsky, however, found fine structure in the spectrum as far down as 4100 A and suggested therefore that the reaction occurred as a result of a collision between a photochemically activated molecule and a normal molecule. On the other hand, Allmand (1931) pointed out that the fact that γ was not reduced (Kistiakowsky 1930) either by sevenfold dilution with nitrogen or reduction in pressure by a factor of nine, indicated a primary dissociation mechanism. He suggested the possibility of this occurring without the disappearance of rotational fine structure. Recently, Winn (1939) has found photochemical decomposition of NOCl to occur with a quantum efficiency of 2 down to extremely low pressures. The existence of rotational fine structure associated with primary dissociation still awaits clarification. The authors have therefore reinvestigated the absorption spectrum of nitrosyl chloride in the visible and ultraviolet regions, and have measured the extinction coefficients over a wide range. Manganini (1889) was the first to study this spectrum but made only qualitative measurements. Leermakers and Ramsperger (1932), incidental to another problem, measured the extinction coefficient of NOCl over a small part of the visible region, but made no mention of fine structure. The molecular structure of NOCl has been investigated recently by both infra-red and electron diffraction methods (Bailey and Cassie 1934; Ketelaar and Palmer 1937; Fox and Martin 1938). The molecule is apparently triangular, the only non-linear completely asymmetrical triatomic molecule reported in the literature.* The other nitrosyl halides are presumably similar. The characteristics of the vibrations of such a molecule still await complete solution.

1984 ◽  
Vol 217 (2) ◽  
pp. 573-580 ◽  
Author(s):  
Y Murakami ◽  
T Kameji ◽  
S Hayashi

When rat liver homogenate or its postmitochondrial supernatant was incubated with L-cysteine, but not D-cysteine, ornithine decarboxylase (ODC) lost more than half of its catalytic activity within 30 min and, at a slower rate, its immunoreactivity. The inactivation correlated with production of H2S during the incubation. These changes did not occur in liver homogenates from vitamin B6-deficient rats. A heat-stable inactivating factor was found in both dialysed cytosol and washed microsomes obtained from the postmitochondrial supernatant incubated with cysteine. The microsomal inactivating factor was solubilized into Tris/HCl buffer, pH 7.4, containing dithiothreitol. Its absorption spectrum in the visible region resembled that of Fe2+ X dithiothreitol in Tris/HCl buffer. On the other hand FeSO4 inactivated partially purified ODC in a similar manner to the present inactivating factor. During the incubation of postmitochondrial supernatant with cysteine, there was a marked increase in the contents of Fe2+ loosely bound to cytosolic and microsomal macromolecules. Furthermore, the content of such reactive iron in the inactivating factor preparations was enough to account for their inactivating activity. These data suggested that H2S produced from cysteine by some vitamin B6-dependent enzyme(s) converted cytosolic and microsomal iron into a reactive loosely bound form that inactivated ODC.


Measurements of the spectra, fluorescence, and photochemical decomposition of aldehydes and ketones containing the chromophoric carbonyl group are already extensive and well known. There is, however, one compound of the same type, possessing a unique structure, which has so far received little attention. This substance, carbon suboxide, is according to the electron diffraction measurements of Pauling and Brockway, linear, and may be written O=C=C=C=O. It thus contains solely a combination of C=O and C=C linkages, the chromophoric and physical properties of each of which have already been investigated experimentally. In addition, the electronic structures and energy levels of these groupings have been studied recently by theoretical methods. We have therefore examined the absorption spectrum and photochemistry of this pentatomic molecule. Since it is gaseous at room temperatures, carbon suboxide has obvious experimental advantages; on the other hand, its tendency to polymerize thermally under ordinary conditions introduces complications into the photochemical measurements. The thermal decomposition of the substance was recently described by Klemenc, Wechsberg, and Wagner, which adds interest to the present work.


Author(s):  
E. N. Albert

Silver tetraphenylporphine sulfonate (Ag-TPPS) was synthesized in this laboratory and used as an electron dense stain for elastic tissue (Fig 1). The procedures for the synthesis of tetraphenylporphine sulfonate and the staining method for mature elastic tissue have been described previously.The fine structure of developing elastic tissue was observed in fetal and new born rat aorta using tetraphenylporphine sulfonate, phosphotungstic acid, uranyl acetate and lead citrate. The newly forming elastica consisted of two morphologically distinct components. These were a central amorphous and a peripheral fibrous. The ratio of the central amorphous and the peripheral fibrillar portion changed in favor of the former with increasing age.It was also observed that the staining properties of the two components were entirely different. The peripheral fibrous component stained with uranyl acetate and/or lead citrate while the central amorphous portion demonstrated no affinity for these stains. On the other hand, the central amorphous portion of developing elastic fibers stained vigorously with silver tetraphenylporphine sulfonate, while the fibrillar part did not (compare figs 2, 3, 4). Based upon the above observations it is proposed that developing elastica consists of two components that are morphologically and chemically different.


Author(s):  
Alfredo Feria-Velasco ◽  
Guadalupe Tapia-Arizmendi

The fine structure of the Harderian gland has been described in some animal species (hamster, rabbit, mouse, domestic fowl and albino rats). There are only two reports in the literature dealing on the ultrastructure of rat Harderian gland in adult animals. In one of them the author describes the myoepithelial cells in methacrylate-embbeded tissue, and the other deals with the maturation of the acinar cells and the formation of the secretory droplets. The aim of the present work is to analize the relationships among the acinar cell components and to describe the two types of cells located at the perifery of the acini.


2020 ◽  
pp. 1192-1198
Author(s):  
M.S. Mohammad ◽  
Tibebe Tesfaye ◽  
Kim Ki-Seong

Ultrasonic thickness gauges are easy to operate and reliable, and can be used to measure a wide range of thicknesses and inspect all engineering materials. Supplementing the simple ultrasonic thickness gauges that present results in either a digital readout or as an A-scan with systems that enable correlating the measured values to their positions on the inspected surface to produce a two-dimensional (2D) thickness representation can extend their benefits and provide a cost-effective alternative to expensive advanced C-scan machines. In previous work, the authors introduced a system for the positioning and mapping of the values measured by the ultrasonic thickness gauges and flaw detectors (Tesfaye et al. 2019). The system is an alternative to the systems that use mechanical scanners, encoders, and sophisticated UT machines. It used a camera to record the probe’s movement and a projected laser grid obtained by a laser pattern generator to locate the probe on the inspected surface. In this paper, a novel system is proposed to be applied to flat surfaces, in addition to overcoming the other limitations posed due to the use of the laser projection. The proposed system uses two video cameras, one to monitor the probe’s movement on the inspected surface and the other to capture the corresponding digital readout of the thickness gauge. The acquired images of the probe’s position and thickness gauge readout are processed to plot the measured data in a 2D color-coded map. The system is meant to be simpler and more effective than the previous development.


2020 ◽  
Vol 24 ◽  
Author(s):  
Bubun Banerjee ◽  
Gurpreet Kaur ◽  
Navdeep Kaur

: Metal-free organocatalysts are becoming an important tool for the sustainable developments of various bioactive heterocycles. On the other hand, during last two decades, calix[n]arenes have been gaining considerable attention due to their wide range of applicability in the field of supramolecular chemistry. Recently, sulfonic acid functionalized calix[n] arenes are being employed as an efficient alternative catalyst for the synthesis of various bioactive scaffolds. In this review we have summarized the catalytic efficiency of p-sulfonic acid calix[n]arenes for the synthesis of diverse biologically promising scaffolds under various reaction conditions. There is no such review available in the literature showing the catalytic applicability of p-sulfonic acid calix[n]arenes. Therefore, we strongly believe that this review will surely attract those researchers who are interested about this fascinating organocatalyst.


The system of bands in the visible region of the emission spectrum of magnesium hydride is now well known. The bands with heads at λλ 5622, 5211, 4845 were first measured by Prof. A. Fowler, who arranged many of the strongest lines in empirical series for identification with absorption lines in the spectra of sun-spots. Later, Heurlinger rearranged these series in the now familiar form of P, Q and R branches, and considered them, with the OH group, as typical of doublet systems in his classification of the fine structure of bands. More recently, W. W. Watson and P. Rudnick have remeasured these bands, using the second order of a 21-foot concave grating, and have carried out a further investigation of the fine structure in the light of the present theory of band spectra. Their detection of an isotope effect of the right order of magnitude, considered with the general structure of the system, and the experimental work on the production of the spectrum, seems conclusive in assigning these bands to the diatomic molecule MgH. The ultra-violet spectrum of magnesium hydride is not so well known. The band at λ 2430 and the series of double lines in the region λ 2940 to λ 3100, which were recorded by Prof. Fowler in 1909 as accompanying the group of bands in the visible region, appear to have undergone no further investigation. In view of the important part played by hydride band spectra in the correlation of molecular and atomic electronic energy levels, it was thought that a study of these features might prove of interest in yielding further information on the energy states of the MgH molecule. The present paper deals with observations on the band at λ 2430; details of an investigation of the other features of the ultra-violet spectrum will be given in a later communication.


Synthesis ◽  
2021 ◽  
Author(s):  
Fengtao Zhou ◽  
Qiuyu Zhang ◽  
Kashif Majeed ◽  
Bangjie Liu

AbstractA copper-catalyzed tandem reaction has been developed for the synthesis of 1,2,3-triazole-fused indole derivatives. This protocol allowed us to access a wide range of 1,2,3-triazole-fused indole derivatives in moderate to excellent yields. The 1,2,3-triazole-fused indole derivatives emit blue and greenish light when excited at 365 nm. The products were further explored for their quantum efficiency and photophysical properties.


2021 ◽  
Vol 15 (5) ◽  
pp. 1-32
Author(s):  
Quang-huy Duong ◽  
Heri Ramampiaro ◽  
Kjetil Nørvåg ◽  
Thu-lan Dam

Dense subregion (subgraph & subtensor) detection is a well-studied area, with a wide range of applications, and numerous efficient approaches and algorithms have been proposed. Approximation approaches are commonly used for detecting dense subregions due to the complexity of the exact methods. Existing algorithms are generally efficient for dense subtensor and subgraph detection, and can perform well in many applications. However, most of the existing works utilize the state-or-the-art greedy 2-approximation algorithm to capably provide solutions with a loose theoretical density guarantee. The main drawback of most of these algorithms is that they can estimate only one subtensor, or subgraph, at a time, with a low guarantee on its density. While some methods can, on the other hand, estimate multiple subtensors, they can give a guarantee on the density with respect to the input tensor for the first estimated subsensor only. We address these drawbacks by providing both theoretical and practical solution for estimating multiple dense subtensors in tensor data and giving a higher lower bound of the density. In particular, we guarantee and prove a higher bound of the lower-bound density of the estimated subgraph and subtensors. We also propose a novel approach to show that there are multiple dense subtensors with a guarantee on its density that is greater than the lower bound used in the state-of-the-art algorithms. We evaluate our approach with extensive experiments on several real-world datasets, which demonstrates its efficiency and feasibility.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1461
Author(s):  
Shun-Hsin Yu ◽  
Jen-Shuo Chang ◽  
Chia-Hung Dylan Tsai

This paper proposes an object classification method using a flexion glove and machine learning. The classification is performed based on the information obtained from a single grasp on a target object. The flexion glove is developed with five flex sensors mounted on five finger sleeves, and is used for measuring the flexion of individual fingers while grasping an object. Flexion signals are divided into three phases, and they are the phases of picking, holding and releasing, respectively. Grasping features are extracted from the phase of holding for training the support vector machine. Two sets of objects are prepared for the classification test. One is printed-object set and the other is daily-life object set. The printed-object set is for investigating the patterns of grasping with specified shape and size, while the daily-life object set includes nine objects randomly chosen from daily life for demonstrating that the proposed method can be used to identify a wide range of objects. According to the results, the accuracy of the classifications are achieved 95.56% and 88.89% for the sets of printed objects and daily-life objects, respectively. A flexion glove which can perform object classification is successfully developed in this work and is aimed at potential grasp-to-see applications, such as visual impairment aid and recognition in dark space.


Sign in / Sign up

Export Citation Format

Share Document