scholarly journals Printability study of metal ion crosslinked PEG-catechol based inks

2019 ◽  
Author(s):  
Małgorzata K. Włodarczyk-Biegun ◽  
Julieta I. Paez ◽  
Maria Villiou ◽  
Jun Feng ◽  
Aranzazu del Campo

AbstractInspired by reversible networks present in nature, we have explored the printability of catechol functionalized polyethylene glycol (PEG) based inks with metal-coordination crosslinking. Material formulations containing Al3+, Fe3+ or V3+ as crosslinking ions were tested. The printability and shape fidelity were dependent on the ink composition (metal ion type, pH, PEG molecular weight) and printing parameters (extrusion pressure and printing speed). The relaxation time, recovery rate and viscosity of the inks were analyzed in rheology studies and correlated with thermodynamic and ligand exchange kinetic constants of the dynamic bonds and the printing performance (i.e. shape fidelity of the printed structures). The relevance of the relaxation time and ligand exchange kinetics for printability was demonstrated. Cells seeded on the crosslinked materials were viable, indicating the potential of the formulations to be used as inks for cell encapsulation. The proposed dynamic ink design offers significant flexibility for 3D (bio)printing, and enables straightforward adjustment of the printable formulation to meet application-specific needs.


2021 ◽  
Vol 32 (2) ◽  
pp. 87-104
Author(s):  
Pui-Voon Yap ◽  
Ming-Yeng Chan ◽  
Seong-Chun Koay

This research work highlights the mechanical properties of multi-material by fused deposition modelling (FDM). The specimens for tensile and flexural test have been printed using polycarbonate (PC) material at different combinations of printing parameters. The effects of varied printing speed, infill density and nozzle diameter on the mechanical properties of specimens have been investigated. Multi-material specimens were fabricated with acrylonitrile butadiene styrene (ABS) as the base material and PC as the reinforced material at the optimum printing parameter combination. The specimens were then subjected to mechanical testing to observe their tensile strength, Young’s modulus, percentage elongation, flexural strength and flexural modulus. The outcome of replacing half of ABS with PC to create a multi-material part has been examined. As demonstrated by the results, the optimum combination of printing parameters is 60 mm/s printing speed, 15% infill density and 0.8 mm nozzle diameter. The combination of ABS and PC materials as reinforcing material has improved the tensile strength (by 38.46%), Young’s modulus (by 23.40%), flexural strength (by 23.90%) and flexural modulus (by 37.33%) while reducing the ductility by 14.31% as compared to pure ABS. The results have been supported by data and graphs of the analysed specimens.



2019 ◽  
Vol 485 (3) ◽  
pp. 306-310
Author(s):  
N. I. Gorshkov ◽  
A. Yu. Murko ◽  
I. I. Gavrilova ◽  
I. I. Malakhova ◽  
V. D. Krasikov ◽  
...  

A terpolymer with a molecular weight of 45 kDa containing 7 mol.% of vinylamine units, 80 mol.% of vinylpyrrolidone, and 3 mol.% of vinyliminodiacetic acid units has been synthesized. Its complexation with Ga3+ ion has been studied by HPLC. The resulting metal–polymer complex has been characterized by exclusion chromatography and spectral (IR, 1H NMR) data. The complex has a monomolecular structure where the metal ion acts as an anchor fragment between vinyliminodiacetic acid units and is stable in the reaction of interligand exchange with histidine.



1987 ◽  
Vol 114 (3) ◽  
pp. 383-389 ◽  
Author(s):  
T. A. Bramley ◽  
G. S. Menzies ◽  
A. S. McNeilly ◽  
H. G. Friesen

ABSTRACT Ovine luteal cytosol fractions inhibited the specific binding of 125I-labelled human GH and ovine prolactin (oPRL) to ovine luteal microsomes in a dose-dependent fashion. Inhibition was dependent on divalent cation concentrations, and was abolished by divalent metal ion chelating agents or by boiling. Inhibition was not due to ionic strength or salt effects on hormone binding, the release of endogenously bound oPRL into the cytosol fraction during tissue disruption and fractionation, or the presence of a soluble (or solubilized) lactogenic receptor in ovine cytosol preparations. Gel chromatography of cytosol fractions gave a molecular weight for the inhibitor of approximately 50 000. J. Endocr. (1987) 114, 383–389



1997 ◽  
Vol 13 (10) ◽  
pp. 925-928
Author(s):  
Luo Ren-Sheng ◽  
◽  
Yan Jiang-Li ◽  
Mao Xi-An


2020 ◽  
Vol 17 (3) ◽  
pp. 252 ◽  
Author(s):  
Elena A. Vialykh ◽  
Dennis R. Salahub ◽  
Gopal Achari

Environmental contextThe fundamental basis for the high flexibility of humic substances is still unclear, though it is crucial for the understanding of metal bioavailability and toxicity in soil and aqueous environments. We show at the molecular level how characteristics of organic matter affect metal binding depending on the environmental conditions. Such understanding will help in the modulation of metal availability in soil and water in changing environmental situations. AbstractIn this work, we explore the hypothesis that humic substances (HS) can be perceived as labile supramolecular assemblages, the functioning of which is mainly determined by chemical composition and characteristics, the size of molecular units and weak intermolecular forces, rather than the exact primary structure of molecular moieties and their spatial configuration. To test the hypothesis, 72 computational models of three different organic mixtures were composed. The formation of inner and outer sphere metal–ligand complexes, metal binding sites, complex configurations, binding energies and aggregation/dissolution as emergent properties of HS were determined under various conditions. The results of computational modelling revealed that: (i) the highest Cu2+ binding (55.6%) was by the SRFA-22 organic model, which represents low-molecular-weight fulvic acids. In contrast, the highest amount of inner-sphere Mg–organic matter complex (63.4%) was formed in SRHA-6, which has higher-molecular-weight constituents. Therefore, a correlation between the type of cation, the system aromaticity and the extent of metal complexation is proposed. (ii) Increase of metal ion concentration and decrease of water content resulted in an increase in the number of hydrogen bonds and more compact and stable aggregates with lower hydrophilic and higher hydrophobic surface areas in SRFA-22. However, in SRHA-6, the results varied owing to the competition between metal binding, H-bonding and non-polar interactions in the structural arrangement of the aggregates. In general, the aggregation process, driven by metal complexation and water removal, resulted in the formation of more stable conformers, with lower potential energy, with the only exception of SRHA-6–Cu.



PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5337 ◽  
Author(s):  
Chanikan Sonklin ◽  
Natta Laohakunjit ◽  
Orapin Kerdchoechuen

Background Bioactive peptides can prevent damage associated with oxidative stress in humans when consumed regularly. Recently, peptides have attracted immense interest because of their beneficial functional properties, safety and little or no side effects when used at high concentration. Most antioxidant peptides are small in size, less than 1 kDa, and contains a high proportion of hydrophobic amino acid. Particularly, tyrosine, leucine, alanine, isoleucine, valine, lysine, phenyalanine, cysteine, methionine and histidine in peptide chain exhibited high antioxidant activity. Mungbean meal protein (MMP) is highly abundant in hydrophobic amino acids. It indicated that MMP might be a good source of antioxidants. Therefore, the objectives were to optimize the conditions used to generate mungbean meal protein hydrolysate (MMPH) with antioxidant activity from bromelain and to investigate the antioxidant activities of different molecular weight (MW) peptide fraction. Methods Response Surface Methodology (RSM) was used for screening of the optimal conditions to produce MMPH. After that MMPH was fractionated using ultrafiltration membranes with different MW distributions. Crude-MMPH and four fractions were investigated for five antioxidant activities: 2,2,1-diphenyl-1-picrylhydrazyl (DPPH), hydroxyl, superoxide, ferric reducing antioxidant power (FRAP) and metal ion chelation activity. Results The optimal condition to produce the MMPH was 15% (w/w) of bromelain and hydrolysis time for 12 h which showed the greatest DPPH and ABTS radical scavenging activity. After mungbean protein from optimal condition was separated based on different molecular weight, the DPPH radical scavenging activity was the highest for the F4 (less than 1 kDa) peptide fraction. Metal ion chelating activity was generally weak, except for the F4 that had a value of 43.94% at a protein concentration of 5 mg/mL. The F4 also exhibited high hydroxyl and superoxide activities (54 and 65.1%), but moderate activity for ferric reducing antioxidant power (0.102 mmole Fe2+/g protein) compared to other peptide fractions and crude-MMPH. Molecular weight and amino acid were the main factors that determined the antioxidant activities of these peptide fractions. Results indicated that F4 had strong antioxidant potentials. Discussion The lowest MW fraction (less than 1 kDa) contributed to the highest DPPH, superoxide, hydroxyl and metal chelation activity because influence of low MW and high content of hydrophobic amino acid in peptide chain. Results from this study indicated that MMPH peptides donate protons to free radicals because they had significantly high DPPH value compared to superoxide, hydroxyl and FRAP, which reactions were electron donation. Moreover, MMPH peptides had the ability to inhibit transition metal ions because of highly abundant glutamic acid and aspartic acid in peptide chain.



Marine Drugs ◽  
2019 ◽  
Vol 17 (10) ◽  
pp. 592 ◽  
Author(s):  
Lai ◽  
Liu ◽  
Liu ◽  
Deng ◽  
Feng ◽  
...  

Dextranase, a hydrolase that specifically hydrolyzes α-1,6-glucosidic bonds, has been used in the pharmaceutical, food, and biotechnology industries. In this study, the strain of Catenovulum agarivorans MNH15 was screened from marine samples. When the temperature, initial pH, NaCl concentration, and inducer concentration were 30 °C, 8.0, 5 g/L, and 8 g/L, respectively, it yielded more dextranase. The molecular weight of the dextranase was approximately 110 kDa. The maximum enzyme activity was achieved at 40 °C and a pH of 8.0. The enzyme was stable at 30 °C and a pH of 5–9. The metal ion Sr2+ enhanced its activity, whereas NH4+, Co2+, Cu2+, and Li+ had the opposite effect. The dextranase effectively inhibited the formation of biofilm by Streptococcus mutans. Moreover, sodium fluoride, xylitol, and sodium benzoate, all used in dental care products, had no significant effect on dextranase activity. In addition, high-performance liquid chromatography (HPLC) showed that dextran was mainly hydrolyzed to glucose, maltose, and maltoheptaose. The results indicated that dextranase has high application potential in dental products such as toothpaste and mouthwash.



Sign in / Sign up

Export Citation Format

Share Document