scholarly journals 3D reconstruction of magnetization from dichroic soft X-ray transmission tomography

2018 ◽  
Vol 25 (4) ◽  
pp. 1144-1152 ◽  
Author(s):  
Aurelio Hierro-Rodriguez ◽  
Doga Gürsoy ◽  
Charudatta Phatak ◽  
Carlos Quirós ◽  
Andrea Sorrentino ◽  
...  

The development of magnetic nanostructures for applications in spintronics requires methods capable of visualizing their magnetization. Soft X-ray magnetic imaging combined with circular magnetic dichroism allows nanostructures up to 100–300 nm in thickness to be probed with resolutions of 20–40 nm. Here a new iterative tomographic reconstruction method to extract the three-dimensional magnetization configuration from tomographic projections is presented. The vector field is reconstructed by using a modified algebraic reconstruction approach based on solving a set of linear equations in an iterative manner. The application of this method is illustrated with two examples (magnetic nano-disc and micro-square heterostructure) along with comparison of error in reconstructions, and convergence of the algorithm.

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
A. Hierro-Rodriguez ◽  
C. Quirós ◽  
A. Sorrentino ◽  
L. M. Alvarez-Prado ◽  
J. I. Martín ◽  
...  

AbstractThe knowledge of how magnetization looks inside a ferromagnet is often hindered by the limitations of the available experimental methods which are sensitive only to the surface regions or limited in spatial resolution. Here we report a vector tomographic reconstruction based on soft X-ray transmission microscopy and magnetic dichroism data, which has allowed visualizing the three-dimensional magnetization in a ferromagnetic thin film heterostructure. Different non-trivial topological textures have been resolved and the determination of their topological charge has allowed us to identify a Bloch point and a meron-like texture. Our method relies only on experimental data and might be of wide application and interest in 3D nanomagnetism.


Author(s):  
S. Kolokytha ◽  
R. Speller ◽  
S. Robson

This study describes a cost-effective check-in baggage screening system, based on "on-belt tomosynthesis" (ObT) and close-range photogrammetry, that is designed to address the limitations of the most common system used, conventional projection radiography. The latter's limitations can lead to loss of information and an increase in baggage handling time, as baggage is manually searched or screened with more advanced systems. This project proposes a system that overcomes such limitations creating a cost-effective automated pseudo-3D imaging system, by combining x-ray and optical imaging to form digital tomograms. Tomographic reconstruction requires a knowledge of the change in geometry between multiple x-ray views of a common object. This is uniquely achieved using a close range photogrammetric system based on a small network of web-cameras. This paper presents the recent developments of the ObT system and describes recent findings of the photogrammetric system implementation. Based on these positive results, future work on the advancement of the ObT system as a cost-effective pseudo-3D imaging of hold baggage for airport security is proposed.


2019 ◽  
Vol 26 (6) ◽  
pp. 2040-2049
Author(s):  
Andreas Schümmer ◽  
H.-Ch. Mertins ◽  
Claus Michael Schneider ◽  
Roman Adam ◽  
Stefan Trellenkamp ◽  
...  

The mechanical setup of a novel scanning reflection X-ray microscope is presented. It is based on zone plate optics optimized for reflection mode in the EUV spectral range. The microscope can operate at synchrotron radiation beamlines as well as at laboratory-based plasma light sources. In contrast to established X-ray transmission microscopes that use thin foil samples, the new microscope design presented here allows the investigation of any type of bulk materials. Importantly, this permits the investigation of magnetic materials by employing experimental techniques based on X-ray magnetic circular dichroism, X-ray linear magnetic dichroism or the transversal magneto-optical Kerr effect (T-MOKE). The reliable functionality of the new microscope design has been demonstrated by T-MOKE microscopy spectra of Fe/Cr-wedge/Fe trilayer samples. The spectra were recorded at various photon energies across the Fe 3p edge revealing the orientation of magnetic domains in the sample.


Author(s):  
Doĝa Gürsoy ◽  
Tekin Biçer ◽  
Jonathan D. Almer ◽  
Raj Kettimuthu ◽  
Stuart R. Stock ◽  
...  

A maximum a posteriori approach is proposed for X-ray diffraction tomography for reconstructing three-dimensional spatial distribution of crystallographic phases and orientations of polycrystalline materials. The approach maximizes the a posteriori density which includes a Poisson log-likelihood and an a priori term that reinforces expected solution properties such as smoothness or local continuity. The reconstruction method is validated with experimental data acquired from a section of the spinous process of a porcine vertebra collected at the 1-ID-C beamline of the Advanced Photon Source, at Argonne National Laboratory. The reconstruction results show significant improvement in the reduction of aliasing and streaking artefacts, and improved robustness to noise and undersampling compared to conventional analytical inversion approaches. The approach has the potential to reduce data acquisition times, and significantly improve beamtime efficiency.


2018 ◽  
Vol 25 (6) ◽  
pp. 1819-1826 ◽  
Author(s):  
Haiyan Yu ◽  
Sihao Xia ◽  
Chenxi Wei ◽  
Yuwei Mao ◽  
Daniel Larsson ◽  
...  

Novel developments in X-ray sources, optics and detectors have significantly advanced the capability of X-ray microscopy at the nanoscale. Depending on the imaging modality and the photon energy, state-of-the-art X-ray microscopes are routinely operated at a spatial resolution of tens of nanometres for hard X-rays or ∼10 nm for soft X-rays. The improvement in spatial resolution, however, has led to challenges in the tomographic reconstruction due to the fact that the imperfections of the mechanical system become clearly detectable in the projection images. Without proper registration of the projection images, a severe point spread function will be introduced into the tomographic reconstructions, causing the reduction of the three-dimensional (3D) spatial resolution as well as the enhancement of image artifacts. Here the development of a method that iteratively performs registration of the experimentally measured projection images to those that are numerically calculated by reprojecting the 3D matrix in the corresponding viewing angles is shown. Multiple algorithms are implemented to conduct the registration, which corrects the translational and/or the rotational errors. A sequence that offers a superior performance is presented and discussed. Going beyond the visual assessment of the reconstruction results, the morphological quantification of a battery electrode particle that has gone through substantial cycling is investigated. The results show that the presented method has led to a better quality tomographic reconstruction, which, subsequently, promotes the fidelity in the quantification of the sample morphology.


Author(s):  
Kazuhiro Suzuki ◽  
Masayoshi Tsutsumi ◽  
Masako Saito ◽  
Makoto Toda ◽  
Kouzou Yamamoto ◽  
...  

Abstract It is important to locate a short circuit failure in semiconductor devices, and powerful tools such as lock-in thermography and optical beam induced resistance change are used. However, those tools are inappropriate for investigating the device covered with the impenetrable substance to light, because the covering substance blocks the light from the defect point in the device and also prevents the optical beam from outside of the device. We demonstrate that a subsurface short circuit in a ball grid array device can be located by magnetic field imaging (MFI) and the electromagnetic field reconstruction method (EM-FRM), which makes it possible to calculate a magnetic field in the immediate vicinity of the current that is the source of the field from a measured magnetic field at a distance. Moreover, we visualize the short circuit by three-dimensional X-ray microscopy. MFI is also applied to visualization of a magnetic field created by a current flowing inside a printed circuit board and a light emitting diode package.


Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2524
Author(s):  
Konstantin Bulatov ◽  
Marina Chukalina ◽  
Kristina Kutukova ◽  
Vlad Kohan ◽  
Anastasia Ingacheva ◽  
...  

Detailed and accurate three-dimensional (3D) information about the morphology of hierarchically structured materials is derived from multi-scale X-ray computed tomography (XCT) and subsequent 3D data reconstruction. High-resolution X-ray microscopy and nano-XCT are suitable techniques to nondestructively study nanomaterials, including porous or skeleton materials. However, laboratory nano-XCT studies are very time-consuming. To reduce the time-to-data by more than an order of magnitude, we propose taking advantage of a monitored tomographic reconstruction. The benefit of this new protocol for 3D imaging is that the data acquisition for each projection is interspersed by image reconstruction. We demonstrate this new approach for nano-XCT data of a novel transition-metal-based materials system: MoNi4 electrocatalysts anchored on MoO2 cuboids aligned on Ni foam (MoNi4/MoO2@Ni). Quantitative data that describe the 3D morphology of this hierarchically structured system with an advanced electrocatalytically active nanomaterial are needed to tailor performance and durability of the electrocatalyst system. We present the framework for monitored tomographic reconstruction, construct three stopping rules for various reconstruction quality metrics and provide their experimental evaluation.


2020 ◽  
Author(s):  
M. Reichardt ◽  
C. Neuhaus ◽  
J-D. Nicolas ◽  
M. Bernhardt ◽  
K. Toischer ◽  
...  

ABSTRACTWe present a multi-scale imaging approach to characterize the structure of isolated adult murine cardiomyocytes based on a combination of full-field three-dimensional (3d) coherent x-ray imaging and scanning x-ray diffraction. Using these modalities, we probe the structure from the molecular to the cellular scale. Holographic projection images on freeze-dried cells have been recorded using highly coherent and divergent x-ray waveguide radiation. Phase retrieval and tomographic reconstruction then yield the 3d electron density distribution with a voxel size below 50 nm. In the reconstruction volume, myofibrils, sarcomeric organisation and mitochondria can be visualized and quantified within a single cell without sectioning. Next, we use micro-focusing optics by compound refractive lenses to probe the diffraction signal of the acto-myosin lattice. Comparison between recordings of chemically fixed and untreated, living cells indicate that the characteristic lattice distances shrink by approximately 10% upon fixation.SIGNIFICANCEDiffraction with synchrotron radiation has played an important role to decipher the molecular structure underlying force generation in muscle. In this work, the diffraction signal of the actomyosin contractile unit has for the first time been recorded from living cardiomyocytes, bringing muscle diffraction to the scale of single cells. In addition to scanning diffraction, we use coherent optics at the same synchrotron endstation to perform holographic imaging and tomography on a single cardiomyocyte. By this hard x-ray microscopy modality, we extend the length scales covered by scanning diffraction and reconstruct the electron density of an entire freeze-dried cardiomyocyte, visualizing the 3d architecture of myofibrils, sarcomers, and mitochondria with a voxel size below 50 nm.


2021 ◽  
Vol 28 (3) ◽  
Author(s):  
Limei Ma ◽  
Zijian Xu ◽  
Zhi Guo ◽  
Benjamin Watts ◽  
Jinyou Lin ◽  
...  

The three-dimensional (3D) dual-energy focal stacks (FS) imaging method has been developed to quickly obtain the spatial distribution of an element of interest in a sample; it is a combination of the 3D FS imaging method and two-dimensional (2D) dual-energy contrast imaging based on scanning transmission soft X-ray microscopy (STXM). A simulation was firstly performed to verify the feasibility of the 3D elemental reconstruction method. Then, a sample of composite nanofibers, polystyrene doped with ferric acetylacetonate [Fe(acac)3], was further investigated to quickly reveal the spatial distribution of Fe(acac)3 in the sample. Furthermore, the data acquisition time was less than that for STXM nanotomography under similar resolution conditions and did not require any complicated sample preparation. The novel approach of 3D dual-energy FS imaging, which allows fast 3D elemental mapping, is expected to provide invaluable information for biomedicine and materials science.


Sign in / Sign up

Export Citation Format

Share Document