scholarly journals The effect of powder age in high speed sintering of poly(propylene)

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Rhys J. Williams ◽  
Luke Fox ◽  
Candice Majewski
Keyword(s):  
Success Rate ◽  
High Speed ◽  
Dimensional Accuracy ◽  
High Volume ◽  
Content Type ◽  
Polymer Powder ◽  
Powder Properties ◽  
Poly Propylene ◽  
Seven Generations ◽  
First Time

Purpose This study aims to demonstrate for the first time that the cheap, commodity polymer, poly(propylene), can be successfully processed using high speed sintering, and that it can be recycled several times through the process, with little to no detriment to either the polymer itself or the parts obtained. This is significant as a step towards the realisation of high speed sintering as a technology for high-volume manufacturing. Design/methodology/approach A poly(propylene) powder designed for laser sintering was used to build parts on a high speed sintering machine. The unsintered powder was then collected and reused. Repeating this process allowed creation of seven generations of aged powder. A variety of characterisation techniques were then used to measure polymer, powder and part properties for each generation to discern any effects arising from ageing in the machine. Findings It was found that poly(propylene) could be used successfully in high speed sintering, albeit with a low build success rate. Increased powder age was found to correlate to an increase in the build success rate, changes in microscopic and bulk powder properties and improvement to the dimensional accuracy of the parts obtained. By contrast, no discernible correlations were seen between powder age and polymer molecular weight, or between powder age and the tensile properties of parts. Originality/value This is the first report of the use of poly(propylene) in high speed sintering. It is also first study regarding powder recyclability in high speed sintering, both in general and using poly(propylene) specifically.

3D sand mould printing: a review and a new approach

2018 ◽  
Vol 24 (2) ◽  
pp. 285-300 ◽  
Author(s):  
Donghua Zhao ◽  
Weizhong Guo ◽  
Baibing Zhang ◽  
Feng Gao
Keyword(s):  
Large Scale ◽  
Manufacturing Industry ◽  
Dimensional Accuracy ◽  
Time Analysis ◽  
New Approach ◽  
Content Type ◽  
On Line ◽  
Sand Mould ◽  
First Time ◽  
Practical Implications

Purpose The purpose of this paper is to review available technologies, analyse their features, propose a new approach of 3D sand mould printing based on line forming, introduce the manufacturing principle and show advantages of this approach, especially for larger parts with large Z steps in the build, such as 2 mm stepwise. Design/methodology/approach This paper introduces 3D sand mould printing, compares and analyses technological process and existing fabrication approaches among available technologies first. Then, a new approach of 3D sand mould printing is proposed to improve build speed. In addition, the proposed system will be analysed or benchmarked against existing systems. Findings A new approach based on line forming of sand mould printing is put forward by reviewing and analysing available technologies, to improve build speed from the aspect of basic moulding movement instead of optimization of moulding methods and process parameters. The theoretical calculation and analysis shows that build speed can be improved greatly, and it is more suitable for the manufacture of large-scale casting’s sand mould when considering dimensional accuracy and printing error, as well as uniformity of each layer. Research limitations/implications The specific implement scheme of line forming and nozzle’s specific structure of this new approach need further study. Practical implications Much higher build speed of 3D sand mould printing with new approach brings evident implication for moulds companies and manufacturing industry, having a far-reaching influence on the development of national economy. Originality/value This paper reviews available technologies and presents a new approach of 3D sand mould printing for the first time. Analysis of the new approach shows that this new method of sand mould printing can boost build speed greatly. So, its application prospect is great.

Air barrier effect in out of mesh jet lubrication of ultra-high speed spur gears

2017 ◽  
Vol 69 (2) ◽  
pp. 81-87 ◽  
Author(s):  
Wentao Niu ◽  
Yanzhong Wang ◽  
Yanyan Chen ◽  
Guanhua Song
Keyword(s):  
High Speed ◽  
Cooling System ◽  
Spur Gears ◽  
Barrier Effect ◽  
Content Type ◽  
Pressure Distributions ◽  
Ultra High Speed ◽  
Oil Jet ◽  
First Time ◽  
Dynamics Method

Purpose This paper aims to reveal the mechanism of air barrier effect in jet lubrication and to figure out the influence of gear parameters and conditions on air barrier, thus providing guidance to the design of jet lubrication in ultra-high speed gear cooling system. Design/methodology/approach The computational fluid dynamics method is used to calculate the flow and pressure of ultra-high speed gears. The flow and pressure distributions are obtained under different gear parameters and working conditions, so their variations are obtained. A multiphase flow model is established to simulate the flow regime of oil jet to ultra-high speed gears. Simple experiments are carried out to observe the air barrier effect of high-speed gears. Findings Air barrier effect exists in the jet lubrication of ultra-high speed spur gears, which could prevent oil jet to reach on the gear surfaces. The results show that the generated pressure has positive relations with gear speed, module and width; however, as the increasing of gear width, their marginal contribution to pressure is decreasing. The computational results coincide well with the experimental results. Originality/value The research presented here proposed the air barrier effect of ultra-high speed gears for the first time. It also leads to a design reference guideline that could be used in jet lubrication of ultra-high speed gears, thus preventing lubrication and cooling failures.

RESULTS OF INTRALESIONAL TRIAMCINOLONE ACETONIDE FOR CHALAZION TREATMENT

2011 ◽  
pp. 100-104
Author(s):  
Thi Thu Nguyen ◽  
Viet Hien Vo ◽  
Thi Em Do
Keyword(s):  
Success Rate ◽  
Key Words ◽  
Triamcinolone Acetonide ◽  
Lower Eyelid ◽  
Upper Eyelid ◽  
Interventional Trial ◽  
The Mean ◽  
First Time

The study use intralesional triamcinolone acetonide injection proceduce for chalazion treatment.1. Objectives: To evaluate results of intralesional triamcinolone acetonide injection for chalazion treatment. 2. Method: This noncomparative prospective interventional trial included 72 chalazions of 61 patients. 3. Results: 61 patients (72 chalazions) with 19 males (31.1%) và 42 females (68.9%), the mean age was 24 ± 9,78 years. 31.1% patients was the first time chalazion and 68.9% patients was more than one times chalazion including 78.6% patients was recurrent at the first position and 21.4% patients occur at new position. 72 chalazions with 16 (22.2%) chalazions was treated before and 56 (77.8%) chalazions wasn’t done that. 72 chalazions with 49 chalazions (68.1%) are local in upper eyelid and 23 chalazions (31.9%) are local in lower eyelid. The mean of chalazion diameter is 6.99 ± 3.03mm. Intralesional triamcinolone acetonide is injected to treat 72 chalazions with 16 (22.2%) chalazions are injected through the route of skin and 56 (77.8%) chalazions are injected through the route of conjunctiva. After 2 weeks follow-up, the success rate was 93.1% and 6.9% failed. 4. Conclusion: intralesional triamcinolone acetonide injection for chalazion treatment is really effective. Key words: chalazion, intralesional triamcinolone acetonide.

Isolation and HPLC Determination of the Chemical Components of Gentianella acuta (Michx.) Hulten

2018 ◽  
Vol 15 (1) ◽  
pp. 21-33
Author(s):  
Ying Wei ◽  
Yongqiao Liu ◽  
Yifan Hele ◽  
Weiwei Sun ◽  
Yang Wang ◽  
...  
Keyword(s):  
Medicinal Plant ◽  
High Speed ◽  
Chemical Constituents ◽  
Folk Medicine ◽  
Gradient Elution ◽  
Chemical Components ◽  
Isolation And Characterization ◽  
Major Chemical ◽  
Main Components ◽  
First Time

Background: Gentianella acuta (Michx.) Hulten is an important type of medicinal plant found in several Chinese provinces. It has been widely used in folk medicine to treat various illnesses. However, there is not enough detailed information about the chemical constituents of this plant or methods for their content determination. Objective: The focus of this work is the isolation and characterization of the major chemical constituents of Gentianella acuta, and developing an analytical method for their determination. Methods: The components of Gentianella acuta were isolated using (1) ethanol extraction and adsorption on macroporous resin. (2) and ethyl acetate extraction and high speed countercurrent chromatography. A HPLC-DAD method was developed using a C18 column and water-acetonitrile as the mobile phase. Based on compound polarities, both isocratic and gradient elution methods were developed. Results: A total of 29 compounds were isolated from this plant, of which 17 compounds were isolated from this genus for the first time. The main components in this plant were found to be xanthones. The HPLC-DAD method was developed and validated for their determination, and found to show good sensitivity and reliability. Conclusion: The results of this work add to the limited body of work available on this important medicinal plant. The findings will be useful for further investigation and development of Gentianella acuta for its valuable medicinal properties.

Conference report: innovation, interaction … and a lot of data: first time reflections on Internet Librarian International, UK 2018

2019 ◽  
Vol 36 (2) ◽  
pp. 21-22
Author(s):  
Ray Harper
Keyword(s):  
Best Practice ◽  
New Technologies ◽  
Conference Report ◽  
Library Services ◽  
New Techniques ◽  
Content Type ◽  
Making A Difference ◽  
Analyse Data ◽  
Physical Spaces ◽  
First Time

Purpose The purpose of this paper is to summarise a number of presentations at Day 1 of the Internet Librarian International conference, London, UK (16 October 2018). This was the 20th conference in the series, and the three key themes included were the next-gen library and librarian; understanding users, usage and user experience; and inclusion and inspiration: libraries making a difference. Design/methodology/approach This paper reports from the viewpoint of a first-time attendee of the conference. This summarises the main issues raised by each presentation and draws out the key learning points for practical situations. Findings The conference covered a variety of practical ways in which libraries can use technology to support users and make decisions about services. These include developing interactive physical spaces which include augmented reality; introducing “chat-bots” to support users; using new techniques to analyse data; and piloting new ways to engage users (such as coding clubs). A key theme was how we use and harness data in a way that is ethical, effective and relevant to library services. Originality/value This conference focussed on practical examples of how library and information services across sectors and countries are innovating in a period of huge change. The conference gave delegates numerous useful ideas and examples of best practice and demonstrated the strength of the profession in adapting to new technologies and developments.

Interest rate option hedging portfolios without bank account

2019 ◽  
Vol 37 (1) ◽  
pp. 134-142
Author(s):  
Alberto Bueno-Guerrero
Keyword(s):  
Design Methodology ◽  
Contingent Claim ◽  
Necessary And Sufficient Condition ◽  
Barrier Option ◽  
Bank Account ◽  
Content Type ◽  
Option Hedging ◽  
Hedging Portfolio ◽  
Necessary And Sufficient ◽  
First Time

Purpose This paper aims to study the conditions for the hedging portfolio of any contingent claim on bonds to have no bank account part. Design/methodology/approach Hedging and Malliavin calculus techniques recently developed under a stochastic string framework are applied. Findings A necessary and sufficient condition for the hedging portfolio to have no bank account part is found. This condition is applied to a barrier option, and an example of a contingent claim whose hedging portfolio has a bank account part different from zero is provided. Originality/value To the best of the authors’ knowledge, this is the first time that this issue has been addressed in the literature.

Influence of ageing treatment on microstructure, mechanical properties and adhesive wear behaviour of 6063 aluminium alloy

2014 ◽  
Vol 66 (4) ◽  
pp. 520-524 ◽  
Author(s):  
Serkan Büyükdoğan ◽  
Süleyman Gündüz ◽  
Mustafa Türkmen
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
High Speed ◽  
Al Alloys ◽  
Wear Behaviour ◽  
Al Alloy ◽  
Strain Ageing ◽  
Content Type ◽  
Static Strain ◽  
Structural Applications

Purpose – The paper aims to provide new observations about static strain ageing in aluminium (Al) alloys which are widely used in structural applications. Design/methodology/approach – The present work aims to provide theoretical and practical information to industries or researchers who may be interested in the effect of static strain ageing on mechanical properties of Al alloys. The data are sorted into the following sections: introduction, materials and experimental procedure, results and discussion and conclusions. Findings – Tensile strength, proof strength (0.2 per cent) and percentage elongation measurement were used to investigate the effect of strain ageing on the mechanical properties. Wear tests were performed by sliding the pin specimens, which were prepared from as-received, solution heat-treated, deformed and undeformed specimens after ageing, on high-speed tool steel (64 HRC). It is concluded that the variations in ageing time improved the strength and wear resistance of the 6063 Al alloy; however, a plastically deformed solution-treated alloy has higher strength and wear resistance than undeformed specimens for different ageing times at 180°C. Practical implications – A very useful source of information for industries using or planning to produce Al alloys. Originality/value – This paper fulfils an identified resource need and offers practical help to the industries.

scholarly journals Getting High: High Fidelity Simulation of High Granularity Calorimeters with High Speed

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Erik Buhmann ◽  
Sascha Diefenbacher ◽  
Engin Eren ◽  
Frank Gaede ◽  
Gregor Kasieczka ◽  
...  
Keyword(s):  
Particle Physics ◽  
High Speed ◽  
Deep Neural Networks ◽  
High Fidelity ◽  
High Fidelity Simulation ◽  
Physical Processes ◽  
Electromagnetic Showers ◽  
Information Bottleneck ◽  
First Time ◽  
Processing Network

AbstractAccurate simulation of physical processes is crucial for the success of modern particle physics. However, simulating the development and interaction of particle showers with calorimeter detectors is a time consuming process and drives the computing needs of large experiments at the LHC and future colliders. Recently, generative machine learning models based on deep neural networks have shown promise in speeding up this task by several orders of magnitude. We investigate the use of a new architecture—the Bounded Information Bottleneck Autoencoder—for modelling electromagnetic showers in the central region of the Silicon-Tungsten calorimeter of the proposed International Large Detector. Combined with a novel second post-processing network, this approach achieves an accurate simulation of differential distributions including for the first time the shape of the minimum-ionizing-particle peak compared to a full Geant4 simulation for a high-granularity calorimeter with 27k simulated channels. The results are validated by comparing to established architectures. Our results further strengthen the case of using generative networks for fast simulation and demonstrate that physically relevant differential distributions can be described with high accuracy.

A “Learning from Action” workshop in Japan

2019 ◽  
Vol 40 (2) ◽  
pp. 77-83
Author(s):  
Robert Douglas Hinshelwood ◽  
Luca Mingarelli ◽  
Simona Masnata
Keyword(s):  
Far East ◽  
Opportunity To Learn ◽  
Content Type ◽  
Work Activities ◽  
Defensive Role ◽  
Feedback Data ◽  
Experiential Workshop ◽  
First Time ◽  
Practical Implications

Purpose Many people in severe mentally disturbed states do not use language or other symbolic media well or coherently. Therefore, the non-verbal medium needs to be understood by workers with such people. The “Learning from Action” experiential workshop was developed in order to provide an opportunity to learn about hidden messages in the relationships and roles occurring in activities. In August 2017, a workshop was run for the first time in Japan. The purpose of this paper is to report the experience and dynamics observed by the three consultants, who are here the authors of this paper. Design/methodology/approach After the workshop all the staff and members, including interpreters, were invited to give feedback. Findings Analysis of the feedback data showed certain important dynamics, concerning especially dependence, cultural defences and the defensive role of activity in a multicultural context. Research limitations/implications This is an initial experience to be followed up by later feedback and further workshops. Practical implications Workers awareness of non-verbal communication within the roles of work activities is a training possibility. It faces various resistances including the mental health assumptions of meaninglessness of any communication outside the verbal. Originality/value This is a method of training not widely used even in European countries, and is the first in a country in the far east.

scholarly journals Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4143
Author(s):  
Youzheng Cui ◽  
Shenrou Gao ◽  
Fengjuan Wang ◽  
Qingming Hu ◽  
Cheng Xu ◽  
...  
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Volume Fraction ◽  
Simulation Analysis ◽  
Cutting Temperature ◽  
High Volume ◽  
Cutting Parameters ◽  
High Volume Fraction ◽  
High Wear Resistance ◽  
Element Analysis

Compared with other materials, high-volume fraction aluminum-based silicon carbide composites (hereinafter referred to as SiCp/Al) have many advantages, including high strength, small change in the expansion coefficient due to temperature, high wear resistance, high corrosion resistance, high fatigue resistance, low density, good dimensional stability, and thermal conductivity. SiCp/Al composites have been widely used in aerospace, ordnance, transportation service, precision instruments, and in many other fields. In this study, the ABAQUS/explicit large-scale finite element analysis platform was used to simulate the milling process of SiCp/Al composites. By changing the parameters of the tool angle, milling depth, and milling speed, the influence of these parameters on the cutting force, cutting temperature, cutting stress, and cutting chips was studied. Optimization of the parameters was based on the above change rules to obtain the best processing combination of parameters. Then, the causes of surface machining defects, such as deep pits, shallow pits, and bulges, were simulated and discussed. Finally, the best cutting parameters obtained through simulation analysis was the tool rake angle γ0 = 5°, tool clearance angle α0 = 5°, corner radius r = 0.4 mm, milling depth ap = 50 mm, and milling speed vc= 300 m/min. The optimal combination of milling parameters provides a theoretical basis for subsequent cutting.

Sign in / Sign up

Export Citation Format

Share Document