3 D printing technology and experimental study of chitosan gel using atomized solidification liquid-assisted extrusion molding

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yangwei Wang ◽  
Peilun Lv ◽  
Jian Li ◽  
Liying Yu ◽  
Guodong Yuan ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Theoretical Research ◽  
Error Sources ◽  
Printing Technology ◽  
Content Type ◽  
Printing Ink ◽  
Printing Parameters ◽  
Chitosan Gel ◽  
Printing Method

Purpose This paper aims to propose a suitable atomizing solidification chitosan (CS) gel liquid extrusion molding technology for the three dimensional (3D) printing method, and experiments verify the feasibility of this method. Design/methodology/approach This paper mainly uses experimental means, combined with theoretical research. The preparation method, solidification forming method and 3D printing method of CS gel solution were studied. The CS gel printing mechanism and printing error sources are analyzed on the basis of the CS gel ink printing results, printing performance with different ratios of components by constructing a gel print prototype, experiments evaluating the CS gel printing technology and the effects of the process parameters on the scaffold formation. Findings CS printing ink was prepared; the optimal formula was found; the 3 D printing experiment of CS was completed; the optimal printing parameters were obtained; and the reliability of the forming prototype, printing ink and gel printing process was verified, which allowed for the possibility to apply the 3 D printing technology to the manufacturing of a CS gel structure. Originality/value This study can provide theoretical and technical support for the potential application of CS 3 D printed gels in tissue engineering.

Methodology of technological evolution for three-dimensional printing

2016 ◽  
Vol 116 (1) ◽  
pp. 122-146 ◽  
Author(s):  
Sangsung Park ◽  
Juhwan Kim ◽  
Hongchul Lee ◽  
Dongsik Jang ◽  
Sunghae Jun
Keyword(s):  
3D Printing ◽  
Quantitative Methods ◽  
Three Dimensional ◽  
Principal Component ◽  
Technological Evolution ◽  
Time Series Regression ◽  
Printing Technology ◽  
Content Type ◽  
3D Printing Technology ◽  
The Future

Purpose – An increasing amount of attention is being paid to three-dimensional (3D) printing technology. The technology itself is based on diverse technologies such as laser beams and materials. Hence, 3D printing technology is a converging technology that produces 3D objects using a 3D printer. To become technologically competitive, many companies and nations are developing technologies for 3D printing. So to know its technological evolution is meaningful for developing 3D printing in the future. The paper aims to discuss these issues. Design/methodology/approach – To get technological competitiveness of 3D printing, the authors should know the most important and essential technology for 3D printing. An understanding of the technological evolution of 3D printing is needed to forecast its future technologies and build the R & D planning needed for 3D printing. In this paper, the authors propose a methodology to analyze the technological evolution of 3D printing. The authors analyze entire patent documents related to 3D printing to construct a technological evolution model. The authors use the statistical methods such as time series regression, association analysis based on graph theory, and principal component analysis for patent analysis of 3D printing technology. Findings – Using the proposed methodology, the authors show the technological analysis results of 3D printing and predict its future aspects. Though many and diverse technologies are developed and involved in 3D printing, the authors know only a few technologies take lead the technological evolution of 3D printing. In this paper, the authors find this evolution of technology management for 3D printing. Practical implications – If not all, most people would agree that 3D printing technology is one of the leading technologies to improve the quality of life. So, many companies have developed a number of technologies if they were related to 3D printing. But, most of them have not been considered practical. These were not effective research and development for 3D printing technology. In the study, the authors serve a methodology to select the specific technologies for practical used of 3D printing. Originality/value – Diverse predictions for 3D printing technology have been introduced in many academic and industrial fields. Most of them were made by subjective approaches depended on the knowledge and experience of the experts concerning 3D printing technology. So, they could be fluctuated according to the congregated expert groups, and be unstable for efficient R & D planning. To solve this problem, the authors study on more objective approach to predict the future state of 3D printing by analyzing the patent data of the developed results so far achieved. The contribution of this research is to take a new departure for understanding 3D printing technology using objective and quantitative methods.

Novel exploration of 3D printed wrist arthroplasty to solve the severe and complicated bone defect of wrist

2017 ◽  
Vol 23 (3) ◽  
pp. 465-473 ◽  
Author(s):  
Qing Han ◽  
Yanguo Qin ◽  
Yun Zou ◽  
Chenyu Wang ◽  
Haotian Bai ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Surgical Techniques ◽  
Bone Defects ◽  
Printing Technology ◽  
Content Type ◽  
3D Printing Technology ◽  
3D Printed ◽  
And Function ◽  
Wrist Arthroplasty

Purpose Although proximal row carpectomy, wrist arthrodesis and even total wrist arthroplasty were developed to treat wrist disease using bone and cartilage of the wrist, severe and complicated bone defects caused by ferocious trauma and bone tumors remain a stubborn problem for surgeons. Development and application of the three-dimensional (3D) printing technology may provide possible solutions. Design/methodology/approach Computed tomography (CT) data of three cases with severe bone defects caused by either trauma or bone tumor were collected and converted into three-dimensional models. Prostheses were designed individually according to the residual anatomical structure of the wrist based on the models. Both the models and prostheses were produced using 3D printing technology. A preoperative design was prepared according to the models and prostheses. Then arthroplasty was performed after preoperative simulation with printed models and prostheses. Findings The diameter of the stem and radial medullary cavity, the direction and location of the prosthesis, and other components were checked during the preoperative design and simulation process phases. The three cases with 3D printed wrist all regained reconstruction of normal anatomy and part of the function after surgery. The average increasing Cooney score rate of Cases 2 and 3 was 133.34 ± 23.57 per cent, and that of Case 1 reached 85 per cent. The average declining rate of the Gartland and Werley Score in Cases 2 and 3 was 65.21 ± 18.89 per cent, and that of Case 1 dropped to 5 per cent in the last follow-up. The scores indicated that patients experienced pain relief and function regain. In addition, the degree of patient satisfaction improved. Originality/value 3D printed wrist arthroplasty may provide an effective method for severe and complicated cases without sacrificing other bones. Personal customization can offer better anatomy and function than arthrodesis or other traditional surgical techniques.

The pattern of technological accumulation

2017 ◽  
Vol 28 (1) ◽  
pp. 39-55 ◽  
Author(s):  
Xu Bai ◽  
Yun Liu ◽  
Gangbo Wang ◽  
Changcun Wen
Keyword(s):  
Developing Countries ◽  
3D Printing ◽  
Technological Development ◽  
Three Dimensional ◽  
Printing Technology ◽  
Accumulation Pattern ◽  
Content Type ◽  
3D Printing Technology ◽  
Patent Statistic ◽  
National Technology

Purpose The national technology accumulation pattern in three-dimensional (3D) printing technology field has not yet been studied until now. This paper is to fill this gap. To be specific, the purpose of this paper is to answer the following two questions. What is the comparative advantage of 3D printing technology among countries? What is the relative impact of 3D printing technology in the worldwide? Design/methodology/approach Patent bibliometric analysis was used for analyzing and collecting data to find critical information of 3D printing. Some indicators (RTA, FSGI, RII, CV) have been applied in analyzing the national patterns of technology accumulation in developed and developing countries by using patent statistics. Findings First, the USA, Japan, and Germany are the leading countries in 3D printing technology, while the technology accumulation patterns of these countries are rather different. Second, Israel and Italy have good performance in the fast-growing technology sub-fields. Third, although the number of patents owned by developing countries, such as China and Russia, is not few, the citations received by these patents are low. Research limitations/implications A limitation of this study is that technological development can be reflected by many indicators and patent statistic is merely one reflection form. This study just analyzes the 3D printing technology development from the perspective of patent statistic, the authors would like to continue the comprehensive analysis with the other data indicators in a future study. Originality/value The national technology accumulation pattern in 3D printing technology field has not yet been studied until now. This paper is to fill this gap.

scholarly journals Traditional versus mirror three-dimensional printing technology for isolated acetabular fractures: a retrospective study with a median follow-up of 25 months

2021 ◽  
Vol 49 (6) ◽  
pp. 030006052110285
Author(s):  
Kai Xiao ◽  
Bo Xu ◽  
Lin Ding ◽  
Weiguang Yu ◽  
Lei Bao ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Operation Time ◽  
Harris Hip Score ◽  
Acetabular Fractures ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
Significant Difference

Objective To assess the outcomes of traditional three-dimensional (3D) printing technology (TPT) versus mirror 3D printing technology (MTT) in treating isolated acetabular fractures (IAFs). Methods Consecutive patients with an IAF treated by either TPT or MTT at our tertiary medical centre from 2012 to 2018 were retrospectively reviewed. Follow-up was performed 1, 3, 6, and 12 months postoperatively and annually thereafter. The primary outcome was the Harris hip score (HHS), and the secondary outcomes were major intraoperative variables and key orthopaedic complications. Results One hundred fourteen eligible patients (114 hips) with an IAF (TPT, n = 56; MTT, n = 58) were evaluated. The median follow-up was 25 months (range, 21–28 months). At the last follow-up, the mean HHS was 82.46 ±14.70 for TPT and 86.30 ± 13.26 for MTT with a statistically significant difference. Significant differences were also detected in the major intraoperative variables (operation time, intraoperative blood loss, number of fluoroscopic screenings, and anatomical reduction number) and the major orthopaedic complications (loosening, implant failure, and heterotopic ossification). Conclusion Compared with TPT, MTT tends to produce accurate IAF reduction and may result in better intraoperative variables and a lower rate of major orthopaedic complications.

scholarly journals Porous PLAs with Controllable Density by FDM 3D Printing and Chemical Foaming Agent

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 866
Author(s):  
A. R. Damanpack ◽  
André Sousa ◽  
M. Bodaghi
Keyword(s):  
3D Printing ◽  
Flow Rate ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Layer By Layer ◽  
Printing Technology ◽  
Material Density ◽  
Foaming Agent ◽  
3D Printing Technology ◽  
Fabrication Parameters

This paper shows how fused decomposition modeling (FDM), as a three-dimensional (3D) printing technology, can engineer lightweight porous foams with controllable density. The tactic is based on the 3D printing of Poly Lactic Acid filaments with a chemical blowing agent, as well as experiments to explore how FDM parameters can control material density. Foam porosity is investigated in terms of fabrication parameters such as printing temperature and flow rate, which affect the size of bubbles produced during the layer-by-layer fabrication process. It is experimentally shown that printing temperature and flow rate have significant effects on the bubbles’ size, micro-scale material connections, stiffness and strength. An analytical equation is introduced to accurately simulate the experimental results on flow rate, density, and mechanical properties in terms of printing temperature. Due to the absence of a similar concept, mathematical model and results in the specialized literature, this paper is likely to advance the state-of-the-art lightweight foams with controllable porosity and density fabricated by FDM 3D printing technology.

APPLICATION OF 3D PRINTING TECHNOLOGY FOR RAPID TOOLING IN SHEET METAL FORMING

2020 ◽  
Vol 3 ◽  
pp. 20-30
Author(s):  
M.A. SEREZHKIN ◽  
D.O. KLIMYUK ◽  
A.I. PLOKHIKH
Keyword(s):  
3D Printing ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Rapid Tooling ◽  
Printing Technology ◽  
3D Printing Technology ◽  
3D Printed ◽  
Printed Materials ◽  
Printing Parameters

The article presents the study of the application of 3D printing technology for rapid tooling in sheet metal forming for custom or small–lot manufacturing. The main issue of the usage of 3D printing technology for die tooling was discovered. It is proposed to use the method of mathematical modelling to investigate how the printing parameters affect the compressive strength of FDM 3D–printed parts. Using expert research methods, the printing parameters most strongly affecting the strength of products were identified for further experiments. A method for testing the strength of 3D–printed materials has been developed and tested.

A review on the role of 3D printing in the fight against COVID-19: safety and challenges

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sapam Ningthemba Singh ◽  
Vavilada Satya Swamy Venkatesh ◽  
Ashish Bhalchandra Deoghare
Keyword(s):  
Supply Chain ◽  
3D Printing ◽  
Three Dimensional ◽  
Content Type ◽  
Medical Supplies ◽  
Future Challenges ◽  
Safety And Reliability ◽  
3D Printed ◽  
Comprehensive Study

Purpose During the COVID-19 pandemic, the three-dimensional (3D) printing community is actively participating to address the supply chain gap of essential medical supplies such as face masks, face shields, door adapters, test swabs and ventilator valves. This paper aims to present a comprehensive study on the role of 3D printing during the coronavirus (COVID-19) pandemic, its safety and its challenges. Design/methodology/approach This review paper focuses on the applications of 3D printing in the fight against COVID-19 along with the safety and challenges associated with 3D printing to fight COVID-19. The literature presented in this paper is collected from the journal indexing engines including Scopus, Google Scholar, ResearchGate, PubMed, Web of Science, etc. The main keywords used for searches were 3D printing COVID-19, Safety of 3D printed parts, Sustainability of 3D printing, etc. Further possible iterations of the keywords were used to collect the literature. Findings The applications of 3D printing in the fight against COVID-19 are 3D printed face masks, shields, ventilator valves, test swabs, drug deliveries and hands-free door adapters. As most of these measures are implemented hastily, the safety and reliability of these parts often lacked approval. The safety concerns include the safety of the printed parts, operators and secondary personnel such as the workers in material preparation and transportation. The future challenges include sustainability of the process, long term supply chain, intellectual property and royalty-free models, etc. Originality/value This paper presents a comprehensive study on the applications of 3D printing in the fight against COVID-19 with emphasis on the safety and challenges in it.

Research on the printing error of tilted vertical beams in delta-robot 3D printers

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yuezong Wang ◽  
Jinghui Liu ◽  
Mengfei Guo ◽  
LiuQIan Wang
Keyword(s):  
3D Printing ◽  
Kinematic Model ◽  
Three Dimensional ◽  
3D Printer ◽  
Simulation Approach ◽  
Content Type ◽  
Printing Quality ◽  
Delta Robot ◽  
Error Generation ◽  
Error Simulation

Purpose A three-dimensional (3D) printing error simulation approach is proposed to analyze the influence of tilted vertical beams on the 3D printing accuracy. The purpose of this study is to analyze the influence of such errors on printing accuracy and printing quality for delta-robot 3D printer. Design/methodology/approach First, the kinematic model of a delta-robot 3D printer with an ideal geometric structure is proposed by using vector analysis. Then, the normal kinematic model of a nonideal delta-robot 3D robot with tilted vertical beams is derived based on the above ideal kinematic model. Finally, a 3D printing error simulation approach is proposed to analyze the influence of tilted vertical beams on the 3D printing accuracy. Findings The results show that tilted vertical beams can indeed cause 3D printing errors and further influence the 3D printing quality of the final products and that the 3D printing errors of tilted vertical beams are related to the rotation angles of the tilted vertical beams. The larger the rotation angles of the tilted vertical beams are, the greater the geometric deformations of the printed structures. Originality/value Three vertical beams and six horizontal beams constitute the supporting parts of the frame of a delta-robot 3D printer. In this paper, the orientations of tilted vertical beams are shown to have a significant influence on 3D printing accuracy. However, the effect of tilted vertical beams on 3D printing accuracy is difficult to capture by instruments. To reveal the 3D printing error mechanisms under the condition of tilted vertical beams, the error generation mechanism and the quantitative influence of tilted vertical beams on 3D printing accuracy are studied by simulating the parallel motion mechanism of a delta-robot 3D printer with tilted vertical beams.

Bioprinting in ophthalmology: current advances and future pathways

2019 ◽  
Vol 25 (3) ◽  
pp. 496-514 ◽  
Author(s):  
Nataraj Poomathi ◽  
Sunpreet Singh ◽  
Chander Prakash ◽  
Rajkumar V. Patil ◽  
P.T. Perumal ◽  
...  
Keyword(s):  
3D Printing ◽  
Cardiac Tissue ◽  
Human Life ◽  
Three Dimensional ◽  
3D Models ◽  
Eye Diseases ◽  
Biological Research ◽  
Content Type ◽  
Almost All ◽  
Time Of Operation

Purpose Bioprinting is a promising technology, which has gained a recent attention, for application in all aspects of human life and has specific advantages in different areas of medicines, especially in ophthalmology. The three-dimensional (3D) printing tools have been widely used in different applications, from surgical planning procedures to 3D models for certain highly delicate organs (such as: eye and heart). The purpose of this paper is to review the dedicated research efforts that so far have been made to highlight applications of 3D printing in the field of ophthalmology. Design/methodology/approach In this paper, the state-of-the-art review has been summarized for bioprinters, biomaterials and methodologies adopted to cure eye diseases. This paper starts with fundamental discussions and gradually leads toward the summary and future trends by covering almost all the research insights. For better understanding of the readers, various tables and figures have also been incorporated. Findings The usages of bioprinted surgical models have shown to be helpful in shortening the time of operation and decreasing the risk of donor, and hence, it could boost certain surgical effects. This demonstrates the wide use of bioprinting to design more precise biological research models for research in broader range of applications such as in generating blood vessels and cardiac tissue. Although bioprinting has not created a significant impact in ophthalmology, in recent times, these technologies could be helpful in treating several ocular disorders in the near future. Originality/value This review work emphasizes the understanding of 3D printing technologies, in the light of which these can be applied in ophthalmology to achieve successful treatment of eye diseases.

scholarly journals Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 774 ◽  
Author(s):  
Damir Godec ◽  
Santiago Cano ◽  
Clemens Holzer ◽  
Joamin Gonzalez-Gutierrez
Keyword(s):  
Stainless Steel ◽  
3D Printing ◽  
Tensile Properties ◽  
Layer Thickness ◽  
Flow Rate ◽  
Three Dimensional ◽  
Steel Powder ◽  
Extrusion Temperature ◽  
Fused Filament Fabrication ◽  
Printing Parameters

Fused filament fabrication (FFF) combined with debinding and sintering could be an economical process for three-dimensional (3D) printing of metal parts. In this paper, compounding, filament making, and FFF processing of feedstock material with 55% vol. of 17-4PH stainless steel powder in a multicomponent binder system are presented. The experimental part of the paper encompasses central composite design for optimization of the most significant 3D printing parameters (extrusion temperature, flow rate multiplier, and layer thickness) to obtain maximum tensile strength of the 3D-printed specimens. Here, only green specimens were examined in order to be able to determine the optimal parameters for 3D printing. The results show that the factor with the biggest influence on the tensile properties was flow rate multiplier, followed by the layer thickness and finally the extrusion temperature. Maximizing all three parameters led to the highest tensile properties of the green parts.

Sign in / Sign up

Export Citation Format

Share Document