Determination of Water in Transformer by Water Solubility and Percent Moisture by Dry Weight in Comparison with ppm Water Value for Justification Transformer Maintenance

2020 ◽  
Author(s):  
E. Wannapring ◽  
T. Sirisithichote ◽  
N. Pattanadech ◽  
M. Leelajindakrairerk
Keyword(s):  
Water Solubility ◽  
Dry Weight ◽  
Water Value ◽  
Percent Moisture ◽  
Transformer Maintenance

BIOASSAY OF PROLACTIN

1969 ◽  
Vol 60 (1) ◽  
pp. 91-100 ◽  
Author(s):  
Charles S. Nicoll
Keyword(s):  
Epithelial Cells ◽  
Lipid Content ◽  
Dry Weight ◽  
Fat Content ◽  
Assay Sensitivity ◽  
Mucosal Epithelium ◽  
Wet Weight ◽  
Total Dry Weight

ABSTRACT The response of the pigeon crop-sac to systemically acting prolactin (injected subcutaneously) was evaluated by measuring the wet weight of the responsive lateral lobes of the organ and by determining the dry weight of a 4 cm diameter disc of mucosal epithelium taken from one hemicrop. Of several different injection schedules tested, administration of prolactin in four daily injections was found to yield optimal responses. When compared with a graded series of prolactin doses, measurement of the mucosal dry weight proved to be a better method of response quantification than determination of the crop-sac wet weight with respect to both assay sensitivity and precision. The submucosal tissue of the crop-sac was estimated to constitute about 64 % of the total dry weight of the unstimulated organ and it was found to be relatively unresponsive to prolactin stimulation in comparison with the mucosa. The lipid content of the mucosal epithelium was determined using unstimulated crop-sacs or tissues which showed varying degrees of prolactin-induced proliferation. The fat content of the mucosal epithelial cells increased only slightly more rapidly than the dry weight or the defatted dry weight of the mucosa. Suggestions are made for the further improvement of the systemic crop-sac assay for prolactin.

APPLICATION OF AAS AND NAA FOR DETERMINATION OF TIN IN SRMs, AND IN ANIMAL AND HUMAN ORGANS

1992 ◽  
Vol 02 (04) ◽  
pp. 489-491 ◽  
Author(s):  
MOMOKO CHIBA ◽  
VENKATESH G. IYENGAR
Keyword(s):  
Neutron Activation Analysis ◽  
Activation Analysis ◽  
Reference Materials ◽  
Certified Reference Materials ◽  
Analytical Techniques ◽  
Absorption Spectrometry ◽  
Dry Weight ◽  
Mixed Diet ◽  
Human Organs

Tin (Sn) is one of the causative elements of the environmental pollution. As no certified reference materials for Sn are presently available, existing reference materials were analyzed for Sn by two independent analytical techniques; atomic absorption spectrometry (AAS) and neutron activation analysis (NAA). The results obtained by both methods were in agreement except for mixed diet which contains Sn in the range of 50 μ g/g. Further, tin concentrations in human and animal organs have been examined by AAS. Among organs tested tin concentrations in testes were the highest, 2.08±0.62 μ g/g dry weight (mean ±SD, n=12) in humans, and 1.45±0.55 μ g/g (n=8) in mice.

scholarly journals Experimental model for in vivo determination of dietary fibre and its effect on the absorption of nutrients in the small intestine

1981 ◽  
Vol 45 (2) ◽  
pp. 283-294 ◽  
Author(s):  
Ann-Sofie Sandberg ◽  
H. Andersson ◽  
B. Hallgren ◽  
Kristina Hasselblad ◽  
B. Isaksson ◽  
...  
Keyword(s):  
Small Intestine ◽  
Wheat Bran ◽  
Dietary Fibre ◽  
Dry Weight ◽  
Direct Analysis ◽  
Fresh Weight ◽  
Wet Weight ◽  
Definition Of

1. An experimental model for the determination of dietary fibre according to the definition of Trowell et al. (1976) is described. Food was subjected to in vivo digestion in ileostomy patients, and the ileostomy contents were collected quantitatively, the polysaccharide components of which were analysed by gas–liquid chromatography and the Klason lignin by gravimetric determination. The model was used for the determination of dietary fibre in AACC (American Association of Cereal Chemists), wheat bran and for studies on the extent of hydrolysis of wheat-bran fibre in the stomach and small intestine. The effect of wheat bran on ileostomy losses of nitrogen, starch and electrolytes was also investigated.2. Nine patients with established ileostomies were studied during two periods while on a constant low-fibre diet. In the second period 16 g AACC wheat bran/d was added to the diet. The ileostomy contents and duplicate portions of the diet were subjected to determinations of wet weight, dry weight, water content, fibre components, starch, N, sodium and potassium.3. The wet weight of ileostomy contents increased by 94 g/24 h and dry weight by 10 g/24 h after consumption of bran. The dietary fibre of AACC bran, determined as the increase in polysaccharides and lignin of ileostomy contents after consumption of bran, was 280 g/kg fresh weight (310 g/kg dry matter). Direct analysis of polysaccharides and lignin in bran gave a value of 306 g/kg fresh weight. Of the added bran hemicellulose and cellulose 80–100% and 75–100% respectively were recovered in ileostomy contents. There was no significant difference between the two periods in amount of N, starch and K found in the ileostomy contents. The Na excretion increased during the ‘bran’ period and correlated well with the wet weight of ileostomy contents.4. In conclusion, it seems probable that determination of dietary fibre by in vivo digestion in ileostomy patients comes very close to the theoretical definition of dietary fibre, as the influence of bacteria in the ileum seems small. Bacterial growth should be avoided by using a technique involving the change of ileostomy bags every 2 h and immediate deep-freezing of the ileostomy contents. True dietary fibre can be determined by direct analysis of polysaccharides and lignin in the food, at least in bran. Very little digestion of hemicellulose and cellulose from bran occurs in the stomach and small bowel. The 10–20% loss in some patients may be due to digestion by the gastric juice or to bacterial fermentation in the ileum, or both. The extra amount of faecal N after consumption of bran, reported by others, is probably produced in the large bowel.

scholarly journals Determination of critical pH and Al concentration of acidic Ultisols for wheat and canola crops

2016 ◽  
Author(s):  
Abdulaha-Al Baquy ◽  
Jiu-Yu Li ◽  
Chen-Yang Xu ◽  
Khalid Mehmood ◽  
Ren-Kou Xu
Keyword(s):  
Soil Ph ◽  
Crop Production ◽  
Soil Acidity ◽  
Production Systems ◽  
Southern China ◽  
Chemical Properties ◽  
Dry Weight ◽  
Hydrated Lime ◽  
Dry Land

Abstract. Soil acidity has become a serious constraint in dry land crop production systems of acidic Ultisols in tropical and subtropical regions of southern China, where winter wheat and canola are cultivated as important rotational crops. Regardless of other common existing concerns in acidic Ultisols of southern China, it needs to be investigated whether soil acidity has any effect on wheat and canola growth. There is little information on the determination of critical soil pH as well as aluminium (Al) concentration for wheat and canola crops. The objective of this study was to determine the critical soil pH and exchangeable aluminium concentration (AlKCl) for wheat and canola production. Two pot cultures with two Ultisols from Hunan and Anhui were conducted for wheat and canola crops in a controlled growth chamber, with a completely randomized design. A soil pH gradient ranging from 3.7 (Hunan) and 3.97 (Anhui) to 6.5, with three replications, was used as a treatment. Aluminium sulfate (Al2(SO4)3) and hydrated lime (Ca(OH)2) were used to obtain the target soil pH levels. Plant height, shoot dry weight, root dry weight, and chlorophyll content (SPAD value) of wheat and canola were adversely affected by soil acidity in both locations. The critical soil pH and AlKCl of the Ultisol from Hunan for wheat were 5.29 and 0.56 cmol kg−1, respectively. At Anhui, the threshold soil pH and AlKCl for wheat were 4.66 and 2.36 cmol kg−1, respectively. On the other hand, the critical soil pH for canola was 5.65 and 4.87 for the Ultisols from Hunan and Anhui, respectively. The critical soil exchangeable Al for canola cannot be determined from the experiment of this study. The results suggested that the critical soil pH and AlKCl varied between different locations for the same variety of crop, due to the different soil types and their other soil chemical properties. The critical soil pH for canola was higher than that for wheat for both Ultisols, thus canola was more sensitive to soil acidity. Therefore, we recommend that liming should be undertaken to increase soil pH if it falls below these critical soil pH levels for wheat and canola production.

scholarly journals A new approach to the chromatographic determination of quercetin water solubility

2019 ◽  
Vol 23 (3) ◽  
pp. 386-392
Author(s):  
Igor G. Zenkevich ◽  
◽  
Dmitrii A. Olisov ◽  
Roman V. Shafigulin ◽  
Andzhela V. Bulanova ◽  
...  
Keyword(s):  
Water Solubility ◽  
Chromatographic Determination ◽  
New Approach

scholarly journals Heavy Metals Content in Phaeophyceae from Malang Rapat Waters, Bintan

2021 ◽  
Vol 26 (1) ◽  
pp. 57-62
Author(s):  
Hilda Novianty ◽  
Emienour Muzalina Mustafa ◽  
Suratno Suratno
Keyword(s):  
Heavy Metals ◽  
Metal Contamination ◽  
Heavy Metal Contamination ◽  
Dry Weight ◽  
Raw Material ◽  
National Agency ◽  
Brown Macroalgae ◽  
Turbinaria Conoides ◽  
Processed Products

The use of brown-macroalgae (Phaeophyceae) as an alginate source is very broad, covering the food and non-food industry, because of that it is necessary to know the safety of these natural resources, one of which is safe from heavy metal contamination. The purpose of this study was to determine heavy metals concentrations accumulated in several types of Phaeophyceae (brown macroalgae) as an alginate source from Malang Rapat waters, Bintan. The method used was descriptive non-experimental. The determination of the location of sampling was done by purposive sampling method. Samples were taken through free collection, identified species and measured of metal contamination concentrations for As, Cd, and Pb. The data obtained were analyzed descriptively. The results showed that Phaeophyceae found in Malang Rapat waters were Turbinaria conoides, Sargassum aquifolium, Padina australis, Hormophysa cuneiformis with each metal concentration contamination of As 13.95 to 23.30 µg.g-1 dry weight; Cd from 0.33 to 1.08 µg.g-1 dry weight and Pb from 4.72 to 9.92 µg.g-1 dry weight. This study showed that all metal contamination ranges in all Phaeophyceae were on the verge of the maximum limit set by the National Standardization Agency of Indonesia Indonesian (SNI) No 7387 of 2009 and National Agency of Drug and Food Control of RI (BPOM) Regulation No 5 of 2018 for dried macroalgae product so that Phaeophyceae from Malang Rapat waters - Bintan was not safe to be used as raw material for alginate source or other processed products of brown-macroalgae.

scholarly journals Determination of trace elements in the plants of Mt. Bozdag, Izmir, Turkey

2010 ◽  
Vol 62 (3) ◽  
pp. 731-738 ◽  
Author(s):  
D. Yildiz ◽  
I. Kula ◽  
G. Ay ◽  
S. Baslar ◽  
Y. Dogan
Keyword(s):  
Trace Elements ◽  
Woody Plants ◽  
Statistical Significance ◽  
Absorption Spectrometry ◽  
Dry Weight ◽  
Current Level ◽  
The Mean ◽  
Herbaceous And Woody Plants ◽  
Made In

The aim of this study was to determine the current level of atmospheric heavy metal content on the Bozdag Mountain of the Aegean Region, Turkey. Twenty nine different plants were selected to study their potential as biomonitors of trace elements such as Ni, Zn, Fe, Pb, Mn and Cd (?g g-1, dry weight). The samples were collected from two different altitudes of Mt. Bozdag. The concentrations of trace elements were determined by atomic absorption spectrometry. The mean concentrations determined at 1000 m altitude ranged from 0.025 to 1.609, 0.232 to 0.731, 0.578 to 5.983, 0.287 to 0.565 and 0.176 to 2.659 (?g g-1, dry weight), for Ni, Zn, Fe, Pb and Mn, respectively. At the altitude of 1600 m, the values ranged from 0.023 to 0.939, 0.258 to 1.254, 0.839 to 5.176, 0.301 to 1.341 and 0.405 to 3.351 (?g g-1, dry weight) for Ni, Zn, Fe, Pb and Mn, respectively. No Cd was detected at either altitude. Statistical significance was determined by the independent sample t-test and comparisons were made in order to determine if there were any differences between the averages of herbaceous and woody plants. .

scholarly journals DETERMINATION OF PROPERTIES AND ELEMENTAL COMPOSITION OF MUNICIPAL SOLID WASTE IN ORDER TO PROPOSAL OF WASTE-TO-ENERGY PROJECT IN BINH DUONG PROVINCE

2018 ◽  
Vol 54 (2A) ◽  
pp. 56
Author(s):  
Phung Chi Vy
Keyword(s):  
Solid Waste ◽  
Elemental Composition ◽  
Calorific Value ◽  
Dry Weight ◽  
Solid Wastes ◽  
Waste To Energy ◽  
Composition Analysis ◽  
Energy Plant ◽  
Inorganic Components

Domestic solid wastes are classified into 10 samples of 04 groups with different sizes: 2 samples with sizes under and over 120 mm (M1-1, M1-2); 2 samples with sizes under and over 80 mm (M2-1, M2-2); 2 samples with sizes under and over 40 mm (M3-1, M3-2); 4 samples with sizes under 40 mm, 40 to 80 mm, 80 to 120 mm and over 120 mm (M4-1, M4-2, M4-3, M4-4). Results of sorting 10 solid waste samples into food, cloth, wood, plastic, paper, rubber/leather, metal, glass, other organic and inorganic components shown that recycled combustible, non-recycled combustible portions are ranged from 15,46 to 93,90 %, from 5,34 to 80,17 %, respectively. The density of 10 compressed garbage samples is ranged from 525,9 to 2016,7 kg/m3; moisture contents are ranged from 18.03 to 20.92 %. Ash content is ranged from 1.12 to 9.49 % dry weight; Calorific value is ranged from 3164,9 to 5757,0 kcal/kg of garbage. The volume of leached water from 10 kg wet garbage pressed by 250 kg load in 2 days is 300 ml (equivalent to 327,1 g). Results of elemental composition analysis shown that the contents of C, H, N, Cl, S are ranged from 35,00 to 51,96, from 6,01 to 6,23, from 0,41 to 0,88, from 0,44 to 0,56, from 0,14 to 0,84 %, respectively. On this basis, the author have proposed a waste-to-energy plant with capacity of 250 tons of waste/day to generate the electricity with capacity of 17,0 MW/day.

Sign in / Sign up

Export Citation Format

Share Document