A Q-band compact amplifier with +22 dB gain, ± 0.5 dB flatness over 40% Fractional Bandwidth in Tower 130 nm CMOS

2021 ◽  
Author(s):  
S. Jameson ◽  
N. Buadana ◽  
Z. Eliatim ◽  
I. Sarousi ◽  
A. Wolfman ◽  
...  
Keyword(s):  
Fractional Bandwidth

scholarly journals Design and Analysis of Super Wideband Antenna for Microwave Applications

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 477
Author(s):  
Warsha Balani ◽  
Mrinal Sarvagya ◽  
Ajit Samasgikar ◽  
Tanweer Ali ◽  
Pradeep Kumar
Keyword(s):  
Communication Systems ◽  
Equivalent Circuit Model ◽  
Wireless Communication Systems ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Fractional Bandwidth ◽  
Wide Bandwidth ◽  
Wireless Applications ◽  
Frequency Constraint ◽  
Time Domain Characterization

In this article, a compact concentric structured monopole patch antenna for super wideband (SWB) application is proposed and investigated. The essential characteristics of the designed antenna are: (i) to attain super-wide bandwidth characteristics, the proposed antenna is emerged from a traditional circular monopole antenna and has obtained an impedance bandwidth of 38.9:1 (ii) another important characteristic of the presented antenna is its larger bandwidth dimension ratio (BDR) value of 6596 that is accomplished by augmenting the electrical length of the patch. The electrical dimension of the proposed antenna is 0.18λ×0.16λ (λ corresponds to the lower end operating frequency). The designed antenna achieves a frequency range from 1.22 to 47.5 GHz with a fractional bandwidth of 190% and exhibiting S11 < −10 dB in simulation. For validating the simulated outcomes, the antenna model is fabricated and measured. Good conformity is established between measured and simulated results. Measured frequency ranges from 1.25 to 40 GHz with a fractional bandwidth of 188%, BDR of 6523 and S11 < −10 dB. Even though the presented antenna operates properly over the frequency range from 1.22 to 47.5 GHz, the results of the experiment are measured till 40 GHz because of the high-frequency constraint of the existing Vector Network Analyzer (VNA). The designed SWB antenna has the benefit of good gain, concise dimension, and wide bandwidth above the formerly reported antenna structures. Simulated gain varies from 0.5 to 10.3 dBi and measured gain varies from 0.2 to 9.7 dBi. Frequency domain, as well as time-domain characterization, has been realized to guide the relevance of the proposed antenna in SWB wireless applications. Furthermore, an equivalent circuit model of the proposed antenna is developed, and the response of the circuit is obtained. The presented antenna can be employed in L, S, C, X, Ka, K, Ku, and Q band wireless communication systems.

scholarly journals An Investigation of Silica Aerogel to Reduce Acoustic Crosstalk in CMUT Arrays

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1459
Author(s):  
Varshitha Yashvanth ◽  
Sazzadur Chowdhury
Keyword(s):  
Silica Aerogel ◽  
Ultrasonic Transducer ◽  
Fluid Interface ◽  
Fractional Bandwidth ◽  
Neighboring Element ◽  
Element Analysis ◽  
Average Improvement ◽  
Capacitive Micromachined Ultrasonic Transducer ◽  
Scholte Wave ◽  
Fea Simulation

This paper presents a novel technique to reduce acoustic crosstalk in capacitive micromachined ultrasonic transducer (CMUT) arrays. The technique involves fabricating a thin layer of diisocyanate enhanced silica aerogel on the top surface of a CMUT array. The silica aerogel layer introduces a highly nanoporous permeable layer to reduce the intensity of the Scholte wave at the CMUT-fluid interface. 3D finite element analysis (FEA) simulation in COMSOL shows that the developed technique can provide a 31.5% improvement in crosstalk reduction for the first neighboring element in a 7.5 MHz CMUT array. The average improvement of crosstalk level over the −6 dB fractional bandwidth was 22.1%, which is approximately 5 dB lower than that without an aerogel layer. The results are in excellent agreement with published experimental results to validate the efficacy of the new technique.

scholarly journals Novel Hexagonal Dual-Mode Substrate Integrated Waveguide Filter with Source-Load Coupling

2014 ◽  
Vol 2014 ◽  
pp. 1-5
Author(s):  
Ziqiang Xu ◽  
Gen Zhang ◽  
Hong Xia ◽  
Meijuan Xu
Keyword(s):  
Center Frequency ◽  
Substrate Integrated Waveguide ◽  
Fractional Bandwidth ◽  
Dual Mode ◽  
Transmission Zeros ◽  
Cavity Structure ◽  
Waveguide Filter ◽  
And Performance ◽  
Single Cavity ◽  
Good Agreement

Hexagonal dual-mode cavity and its application to substrate integrated waveguide (SIW) filter are presented. The hexagonal SIW resonator which can combine flexibility of rectangular cavity and performance of circular cavity is convenient for dual-mode bandpass filters design. By introducing coupling between source and load, the filter not only has good selectivity due to two controllable transmission zeros, but also has a small size by the virtue of its single-cavity structure. A demonstration filter with a center frequency of 10 GHz and a 3 dB fractional bandwidth of 4% is designed and fabricated to validate the proposed structure. Measured results are in good agreement with simulated ones.

scholarly journals A MINIATURIZED TUNABLE BANDPASS FILTER WITH CONSTANT FRACTIONAL BANDWIDTH

2015 ◽  
Vol 57 ◽  
pp. 89-97
Author(s):  
Liangzu Cao ◽  
Guangwen Li ◽  
Jian Hu ◽  
Lixia Yin
Keyword(s):  
Bandpass Filter ◽  
Fractional Bandwidth ◽  
Tunable Bandpass Filter

A Wideband Bandpass Filter Integrated Single-Pole Double-Throw Switch with Wide Stopband

Frequenz ◽  
2018 ◽  
Vol 72 (11-12) ◽  
pp. 533-537 ◽  
Author(s):  
Jin Xu ◽  
Qi-Hang Cai ◽  
Zhi-Yu Chen
Keyword(s):  
Insertion Loss ◽  
Bandpass Filter ◽  
Fractional Bandwidth ◽  
Central Frequency ◽  
Resonant Frequencies ◽  
Capacitively Coupled ◽  
Filter Theory ◽  
Compact Size ◽  
Better Than ◽  
Coupled Resonator

Abstract This paper proposes a wideband bandpass filter (BPF) integrated single-pole double-throw (SPDT) switch by using the capacitively coupled LC resonators with loaded p-i-n diodes. The BPF-integrated on-state channel can be synthesized by using the coupled resonator filter theory, and the off-state channel with high suppression is built due to the misaligned resonant frequencies of LC resonators. As an example, a BPF-integrated SPDT switch is designed and fabricated with the central frequency of 1 GHz and the 3 dB fractional bandwidth of 29.7 %. The on-state channel has a measured insertion loss of 1.23 dB, and a 20 dB rejection wide stopband from 1.47 GHz to 8.6 GHz. The off state channel has a 43 dB suppression around 1 GHz. The isolation between two ports is better than 52.4 dB. The fabricated BPF-integrated SPDT switch size including bias circuits but excluding feeding lines has a compact size of 0.086 λg×0.096 λg.

Radio Observations with a Wide Fractional Bandwidth

1979 ◽  
Vol 3 (5) ◽  
pp. 330-332
Author(s):  
T. W. Cole
Keyword(s):  
Spectral Line ◽  
Spectral Range ◽  
Fractional Bandwidth ◽  
Radio Observations ◽  
Unique Form ◽  
Filter Type ◽  
Line Work ◽  
Channel Filter

Interesting observations have been made possible by the success of the acousto-optical radio spectrograph, a unique form of multi-channel filter type of spectral receiver whose channel outputs ian be sampled at high rates by a computer. Three spectrographs are available at the Division of Radiophysics. Two divide a 100 MHz spectral range into 512 channels and are normally dedicated to spectral-line work (Cole and Milne 1977) and solar work (Cole et al. 1978). The Parkes observations reported here use a more compact spectrograph, which gives increased performance — up to 270 MHz can be studied, divided into 256 frequency channels. The light deflector of this spectrograph was kindly supplied by Itek Corporation.

scholarly journals A Novel Synthetization Approach for Multi Coupled Line Section Impedance Transformers in Wideband Applications

2022 ◽  
Vol 12 (2) ◽  
pp. 875
Author(s):  
Nan Zhang ◽  
Xiaolong Wang ◽  
Chunxi Bao ◽  
Bin Wu ◽  
Chun-Ping Chen ◽  
...  
Keyword(s):  
Transmission Lines ◽  
Return Loss ◽  
Circuit Simulation ◽  
Characteristic Impedance ◽  
Fractional Bandwidth ◽  
Coupled Line ◽  
Variable Parameters ◽  
Line Section ◽  
Original Topology ◽  
Impedance Parameters

In this paper, a novel synthetization approach is proposed for filter-integrated wideband impedance transformers (ITs). The original topology consists of N cascaded coupled line sections (CLSs) with 2N characteristic impedance parameters. By analyzing these characteristic impedances, a Chebyshev response can be derived to consume N + 2 design conditions. To optimize the left N − 2 variable parameters, CLSs were newly substituted by transmission lines (TLs) to consume the remaining variable parameters and simplify the circuit topology. Therefore, there are totally 2N − N − 2 substituting possibilities. To verify the proposed approach, 25 cases are listed under the condition of N = 5, and 7 selected cases are compared and discussed in detail. Finally, a 75–50 Ω IT with 100% fractional bandwidth and 20 dB bandpass return loss (RL) is designed and fabricated. The measured results meet the circuit simulation and the EM simulation accurately.

Sign in / Sign up

Export Citation Format

Share Document