Edge detection algorithms applied to quantitative analysis of X-ray image of osteoma

2002 ◽  
Author(s):  
Zhaoxia Wu ◽  
Shaoqing Chen ◽  
Jingzhi Cheng
Keyword(s):  
Quantitative Analysis ◽  
Edge Detection ◽  
X Ray ◽  
Detection Algorithms

An Effective Method for Defects Detection in Radiographic Images of Welds Based on Edge Detection and Morphology

2013 ◽  
Vol 290 ◽  
pp. 71-77
Author(s):  
Wen Ming Guo ◽  
Yan Qin Chen
Keyword(s):  
Edge Detection ◽  
Detection Method ◽  
Detection Algorithm ◽  
Morphological Processing ◽  
Radiographic Images ◽  
X Ray ◽  
Weld Defects ◽  
Detection Algorithms ◽  
Detection Quality

In the current industrial production, as steel weld X-ray images are low contrasted and noisy, the efficiency and precision can’t be both ensured. This paper has studied three different edge detection algorithms and found the most suitable one to detect weld defects. Combined with this edge detection algorithm, we proposed a new weld defects detection method. This method uses defect features to find the defects in edge images with morphological processing. Compared to the traditional methods, the method has ensured detection quality of weld defects detection.

Quantification of Silica Uptake by Alveolar Macrophages - An Emperical Scanning Electron Microprobe Method

1982 ◽  
Vol 40 ◽  
pp. 332-333
Author(s):  
V. V. Damiano ◽  
R. P. Daniele ◽  
H. T. Tucker ◽  
J. H. Dauber
Keyword(s):  
Quantitative Analysis ◽  
Alveolar Macrophages ◽  
Bulk Sample ◽  
Silica Particles ◽  
Empirical Method ◽  
Phagocytic Cells ◽  
Calibration Standards ◽  
X Ray ◽  
Accurate Quantitative Analysis ◽  
Scanning Electron

An important example of intracellular particles is encountered in silicosis where alveolar macrophages ingest inspired silica particles. The quantitation of the silica uptake by these cells may be a potentially useful method for monitoring silica exposure. Accurate quantitative analysis of ingested silica by phagocytic cells is difficult because the particles are frequently small, irregularly shaped and cannot be visualized within the cells. Semiquantitative methods which make use of particles of known size, shape and composition as calibration standards may be the most direct and simplest approach to undertake. The present paper describes an empirical method in which glass microspheres were used as a model to show how the ratio of the silicon Kα peak X-ray intensity from the microspheres to that of a bulk sample of the same composition correlated to the mass of the microsphere contained within the cell. Irregular shaped silica particles were also analyzed and a calibration curve was generated from these data.

Lateral resolution of the electron microbeam analysis

1978 ◽  
Vol 36 (1) ◽  
pp. 542-543
Author(s):  
H.J. Dudek
Keyword(s):  
Quantitative Analysis ◽  
Depth Resolution ◽  
Lateral Resolution ◽  
Cylindrical Particle ◽  
Correction Procedure ◽  
X Ray ◽  
Element Concentrations ◽  
Microbeam Analysis ◽  
The Matrix

The chemical inhomogenities in modern materials such as fibers, phases and inclusions, often have diameters in the region of one micrometer. Using electron microbeam analysis for the determination of the element concentrations one has to know the smallest possible diameter of such regions for a given accuracy of the quantitative analysis.In th is paper the correction procedure for the quantitative electron microbeam analysis is extended to a spacial problem to determine the smallest possible measurements of a cylindrical particle P of high D (depth resolution) and diameter L (lateral resolution) embeded in a matrix M and which has to be analysed quantitative with the accuracy q. The mathematical accounts lead to the following form of the characteristic x-ray intens ity of the element i of a particle P embeded in the matrix M in relation to the intensity of a standard S

Quantitative Analysis Of X-Ray Images From Geological Materials

1990 ◽  
Vol 48 (2) ◽  
pp. 244-245
Author(s):  
J. M. Paque ◽  
R. Browning ◽  
P. L. King ◽  
P. Pianetta
Keyword(s):  
Quantitative Analysis ◽  
Bulk Composition ◽  
Principal Component ◽  
Analytical Description ◽  
Bulk Sample ◽  
Geological Samples ◽  
X Ray ◽  
Software And Hardware ◽  
And Storage ◽  
Insight Into

Geological samples typically contain many minerals (phases) with multiple element compositions. A complete analytical description should give the number of phases present, the volume occupied by each phase in the bulk sample, the average and range of composition of each phase, and the bulk composition of the sample. A practical approach to providing such a complete description is from quantitative analysis of multi-elemental x-ray images.With the advances in recent years in the speed and storage capabilities of laboratory computers, large quantities of data can be efficiently manipulated. Commercial software and hardware presently available allow simultaneous collection of multiple x-ray images from a sample (up to 16 for the Kevex Delta system). Thus, high resolution x-ray images of the majority of the detectable elements in a sample can be collected. The use of statistical techniques, including principal component analysis (PCA), can provide insight into mineral phase composition and the distribution of minerals within a sample.

Low-voltage EDS of magnesium ferrite Dendrites in a FEG-SEM

1996 ◽  
Vol 54 ◽  
pp. 478-479
Author(s):  
Matthew T. Johnson ◽  
Ian M. Anderson ◽  
Jim Bentley ◽  
C. Barry Carter
Keyword(s):  
Monte Carlo ◽  
Quantitative Analysis ◽  
Monte Carlo Simulations ◽  
Cross Section ◽  
Spatial Resolution ◽  
Low Voltage ◽  
Magnesium Ferrite ◽  
X Ray ◽  
Interaction Volume ◽  
Ferrite Spinel

Energy-dispersive X-ray spectrometry (EDS) performed at low (≤ 5 kV) accelerating voltages in the SEM has the potential for providing quantitative microanalytical information with a spatial resolution of ∼100 nm. In the present work, EDS analyses were performed on magnesium ferrite spinel [(MgxFe1−x)Fe2O4] dendrites embedded in a MgO matrix, as shown in Fig. 1. spatial resolution of X-ray microanalysis at conventional accelerating voltages is insufficient for the quantitative analysis of these dendrites, which have widths of the order of a few hundred nanometers, without deconvolution of contributions from the MgO matrix. However, Monte Carlo simulations indicate that the interaction volume for MgFe2O4 is ∼150 nm at 3 kV accelerating voltage and therefore sufficient to analyze the dendrites without matrix contributions.Single-crystal {001}-oriented MgO was reacted with hematite (Fe2O3) powder for 6 h at 1450°C in air and furnace cooled. The specimen was then cleaved to expose a clean cross-section suitable for microanalysis.

Comparison of high-angle take-off and low-angle take-off EDX detector geometry of the HF-2000 FE-TEM

1993 ◽  
Vol 51 ◽  
pp. 252-253
Author(s):  
Y. Sato ◽  
T. Hashimoto ◽  
M. Ichihashi ◽  
Y. Ueki ◽  
K. Hirose ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Field Emission ◽  
Solid Angle ◽  
Energy Dispersive ◽  
Objective Lens ◽  
X Rays ◽  
High Angle ◽  
X Ray ◽  
Detector Geometry

Analytical TEMs have two variations in x-ray detector geometry, high and low angle take off. The high take off angle is advantageous for accuracy of quantitative analysis, because the x rays are less absorbed when they go through the sample. The low take off angle geometry enables better sensitivity because of larger detector solid angle.Hitachi HF-2000 cold field emission TEM has two versions; high angle take off and low angle take off. The former allows an energy dispersive x-ray detector above the objective lens. The latter allows the detector beside the objective lens. The x-ray take off angle is 68° for the high take off angle with the specimen held at right angles to the beam, and 22° for the low angle take off. The solid angle is 0.037 sr for the high angle take off, and 0.12 sr for the low angle take off, using a 30 mm2 detector.

scholarly journals Fractional Order Processing of Satellite Images

2021 ◽  
Vol 11 (11) ◽  
pp. 5288
Author(s):  
Manuel Henriques ◽  
Duarte Valério ◽  
Rui Melicio
Keyword(s):  
Edge Detection ◽  
Fractional Order ◽  
High Performance ◽  
Satellite Images ◽  
Automatic Detection ◽  
Automatic Processing ◽  
Order Processing ◽  
Detection Algorithms ◽  
Grey Scale ◽  
Fixed Set

Nowadays, satellite images are used in many applications, and their automatic processing is vital. Conventional integer grey-scale edge detection algorithms are often used for this. This study shows that the use of color-based, fractional order edge detection may enhance the results obtained using conventional techniques in satellite images. It also shows that it is possible to find a fixed set of parameters, allowing automatic detection while maintaining high performance.

Sign in / Sign up

Export Citation Format

Share Document