Visible-Spectrum Biometric Retina Recognition

2008 ◽  
Author(s):  
Halvor Borgen ◽  
Patrick Bours ◽  
Stephen D. Wolthusen
Keyword(s):  
Visible Spectrum

Liquid-liquid extraction of succinate using a dicopper cryptate

2020 ◽  
Author(s):  
Riccardo Mobili ◽  
Sonia La Cognata ◽  
Francesca Merlo ◽  
Andrea Speltini ◽  
Massimo Boiocchi ◽  
...  
Keyword(s):  
Aqueous Phase ◽  
Visible Spectrum ◽  
Tca Cycle ◽  
Residual Concentration ◽  
Waste Products ◽  
Liquid Liquid Extraction ◽  
The Tca Cycle ◽  
Quantitative Extraction ◽  
Uv Visible

<div> <p>The extraction of the succinate dianion from a neutral aqueous solution into dichloromethane is obtained using a lipophilic cage-like dicopper(II) complex as the extractant. The quantitative extraction exploits the high affinity of the succinate anion for the cavity of the azacryptate. The anion is effectively transferred from the aqueous phase, buffered at pH 7 with HEPES, into dichloromethane. A 1:1 extractant:anion adduct is obtained. Extraction can be easily monitored by following changes in the UV-visible spectrum of the dicopper complex in dichloromethane, and by measuring the residual concentration of succinate in the aqueous phase by HPLC−UV. Considering i) the relevance of polycarboxylates in biochemistry, as e.g. normal intermediates of the TCA cycle, ii) the relevance of dicarboxylates in the environmental field, as e.g. waste products of industrial processes, and iii) the recently discovered role of succinate and other dicarboxylates in pathophysiological processes including cancer, our results open new perspectives for research in all contexts where selective recognition, trapping and extraction of polycarboxylates is required. </p> </div>

A Highly Crystalline Anthracene-Based MOF-74 Series Featuring Electrical Conductivity and Luminescence

2019 ◽  
Author(s):  
Patricia Scheurle ◽  
Andre Mähringer ◽  
Andreas Jakowetz ◽  
Pouya Hosseini ◽  
Alexander Richter ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Metal Ions ◽  
Light Emission ◽  
Block Design ◽  
High Surface ◽  
Visible Spectrum ◽  
Building Blocks ◽  
Divalent Metal Ions ◽  
Conductivity Enhancement ◽  
Surface Areas

Recently, a small group of metal-organic frameworks (MOFs) has been discovered featuring substantial charge transport properties and electrical conductivity, hence promising to broaden the scope of potential MOF applications in fields such as batteries, fuel cells and supercapacitors. In combination with light emission, electroactive MOFs are intriguing candidates for chemical sensing and optoelectronic applications. Here, we incorporated anthracene-based building blocks into the MOF-74 topology with five different divalent metal ions, that is, Zn2+, Mg2+, Ni2+, Co2+ and Mn2+, resulting in a series of highly crystalline MOFs, coined ANMOF-74(M). This series of MOFs features substantial photoluminescence, with ANMOF-74(Zn) emitting across the whole visible spectrum. The materials moreover combine this photoluminescence with high surface areas and electrical conductivity. Compared to the original MOF-74 materials constructed from 2,5-dihydroxy terephthalic acid and the same metal ions Zn2+, Mg2+, Ni2+, Co2+ and Mn2+, we observed a conductivity enhancement of up to six orders of magnitude. Our results point towards the importance of building block design and the careful choice of the embedded MOF topology for obtaining materials with desired properties such as photoluminescence and electrical conductivity.

Dibenzochrysene Enables Tightly Controlled Docking and Stabilizes Photoexcited States in Dual-Pore Covalent Organic Frameworks

2019 ◽  
Author(s):  
Torben Sick ◽  
Niklas Keller ◽  
Nicolai Bach ◽  
Andreas Koszalkowski ◽  
Julian Rotter ◽  
...  
Keyword(s):  
Molecular Docking ◽  
Photophysical Properties ◽  
Visible Spectrum ◽  
Large Family ◽  
Building Blocks ◽  
Band Gaps ◽  
Docking Site ◽  
Covalent Organic Frameworks ◽  
Connected Node ◽  
Optoelectronic Applications

Covalent organic frameworks (COFs), consisting of covalently connected organic building units, combine attractive features such as crystallinity, open porosity and widely tunable physical properties. For optoelectronic applications, the incorporation of heteroatoms into a 2D COF has the potential to yield desired photophysical properties such as lower band gaps, but can also cause lateral offsets of adjacent layers. Here, we introduce dibenzo[g,p]chrysene (DBC) as a novel building block for the synthesis of highly crystalline and porous 2D dual-pore COFs showing interesting properties for optoelectronic applications. The newly synthesized terephthalaldehyde (TA), biphenyl (Biph), and thienothiophene (TT) DBC-COFs combine conjugation in the a,b-plane with a tight packing of adjacent layers guided through the molecular DBC node serving a specific docking site for successive layers. The resulting DBC-COFs exhibit a hexagonal dual-pore kagome geometry, which is comparable to COFs containing another molecular docking site, namely 4,4′,4″,4‴-(ethylene-1,1,2,2-tetrayl)-tetraaniline (ETTA). In this context, the respective interlayer distances decrease from about 4.60 Å in ETTA-COFs to about 3.6 Å in DBC-COFs, leading to well-defined hexagonally faceted single crystals sized about 50-100 nm. The TT DBC-COFs feature broad light absorption covering large parts of the visible spectrum, while Biph DBC-COF shows extraordinary excited state lifetimes exceeding 10 ns. In combination with the large number of recently developed linear conjugated building blocks, the new DBC tetra-connected node is expected to enable the synthesis of a large family of strongly p-stacked, highly ordered 2D COFs with promising optoelectronic properties.

An Infrared Microscope for Use on a Focused Ion Beam for Circuit Edit and Backside Edit Applications

2015 ◽  
Author(s):  
Alexander Richards ◽  
Matthew Weschler ◽  
Michael Durller
Keyword(s):  
Focused Ion Beam ◽  
Near Infrared ◽  
Ion Beam ◽  
Visible Spectrum ◽  
Camera System ◽  
Buried Structures ◽  
Ir Camera ◽  
Area Of Interest ◽  
Near Ultraviolet ◽  
Infrared Microscope

Abstract To help solve the navigational problem, i.e., being able to successfully locate a circuit for probing or editing without destroying chip functionality, a near-infrared (NIR), near-ultraviolet (NUV), and visible spectrum camera system was developed that attaches to most focused ion beam (FIB) or scanning electron microscope vacuum chambers. This paper reviews the details of the design and implementation of the NIR/NUV camera system, as instantiated upon the FEI FIB 200, with a particular focus on its use for the visualization of buried structures, and also for non-destructive real time area of interest location and end point detection. It specifically considers the use of the micro-optical camera system for its benefit in assisting with frontside and backside circuit edit, as well as other typical FIB milling activities. The quality of the image obtained by the IR camera rivals or exceeds traditional optical based imaging microscopy techniques.

scholarly journals Microfabrication and Surface Functionalization of Soda Lime Glass through Direct Laser Interference Patterning

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 129
Author(s):  
Marcos Soldera ◽  
Sabri Alamri ◽  
Paul Alexander Sürmann ◽  
Tim Kunze ◽  
Andrés Fabián Lasagni
Keyword(s):  
Laser Radiation ◽  
Surface Functionalization ◽  
Incident Light ◽  
Chemical Properties ◽  
Visible Spectrum ◽  
Soda Lime ◽  
Soda Lime Glass ◽  
Textured Surfaces ◽  
Aspect Ratios ◽  
Direct Laser

All-purpose glasses are common in many established and emerging industries, such as microelectronics, photovoltaics, optical components, and biomedical devices due to their outstanding combination of mechanical, optical, thermal, and chemical properties. Surface functionalization through nano/micropatterning can further enhance glasses’ surface properties, expanding their applicability into new fields. Although laser structuring methods have been successfully employed on many absorbing materials, the processability of transparent materials with visible laser radiation has not been intensively studied, especially for producing structures smaller than 10 µm. Here, interference-based optical setups are used to directly pattern soda lime substrates through non-lineal absorption with ps-pulsed laser radiation in the visible spectrum. Line- and dot-like patterns are fabricated with spatial periods between 2.3 and 9.0 µm and aspect ratios up to 0.29. Furthermore, laser-induced periodic surface structures (LIPSS) with a feature size of approximately 300 nm are visible within these microstructures. The textured surfaces show significantly modified properties. Namely, the treated surfaces have an increased hydrophilic behavior, even reaching a super-hydrophilic state for some cases. In addition, the micropatterns act as relief diffraction gratings, which split incident light into diffraction modes. The process parameters were optimized to produce high-quality textures with super-hydrophilic properties and diffraction efficiencies above 30%.

scholarly journals Bicyclic 1,3a,6a-Triazapentalene Chromophores: Synthesis, Spectroscopy and Their Use as Fluorescent Sensors and Probes

Chemosensors ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 16
Author(s):  
Yingchun Wang ◽  
Tomas Opsomer ◽  
Wim Dehaen
Keyword(s):  
Stokes Shift ◽  
Substituent Effects ◽  
Visible Spectrum ◽  
Fluorescent Sensors ◽  
Biological Imaging ◽  
Fluorescent Imaging ◽  
Fluorescence Properties ◽  
Imaging Probes ◽  
Synthetic Methodologies ◽  
Aromatic Heterocyclic

The 1,3a,6a-triazapentalene (TAP) is an aromatic heterocyclic fluorescent dye with interesting features such as its small size, large Stokes shift, solvatochromism, and emission wavelengths that are spread across the visible spectrum. TAPs have been synthesized via different synthetic strategies involving click−cyclization−aromatization domino reactions, gold-catalyzed cyclization of propargyl triazoles or triazolization of acetophenones. As a result, TAPs with diverse substitution patterns were obtained, showing varying fluorescence properties. Based on these properties, several TAPs have been selected and studied as fluorescent imaging probes in living cells and as sensors. This mini review provides an overview of the research on the bicyclic TAPs and does not comment on the literature about benzo or otherwise fused systems. The synthetic methodologies for the preparation of TAPs, the substituent effects on the fluorescence properties, and the behavior of the TAP core as an element of biological imaging probes and sensors are discussed.

scholarly journals Spatial multiplexing holographic combiner for glasses-free augmented reality

Nanophotonics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 3003-3010
Author(s):  
Jiacheng Shi ◽  
Wen Qiao ◽  
Jianyu Hua ◽  
Ruibin Li ◽  
Linsen Chen
Keyword(s):  
Augmented Reality ◽  
Large Scale ◽  
Motion Parallax ◽  
Visible Spectrum ◽  
Physical World ◽  
Spatial Multiplexing ◽  
White Balance ◽  
Full Color ◽  
Entire Visible Spectrum ◽  
3D Scene

AbstractGlasses-free augmented reality is of great interest by fusing virtual 3D images naturally with physical world without the aid of any wearable equipment. Here we propose a large-scale spatial multiplexing holographic see-through combiner for full-color 3D display. The pixelated metagratings with varied orientation and spatial frequency discretely reconstruct the propagating lightfield. The irradiance pattern of each view is tailored to form super Gaussian distribution with minimized crosstalk. What’s more, spatial multiplexing holographic combiner with customized aperture size is adopted for the white balance of virtually displayed full-color 3D scene. In a 32-inch prototype, 16 views form a smooth parallax with a viewing angle of 47°. A high transmission (>75%) over the entire visible spectrum range is achieved. We demonstrated that the displayed virtual 3D scene not only preserved natural motion parallax, but also mixed well with the natural objects. The potential applications of this study include education, communication, product design, advertisement, and head-up display.

scholarly journals Pandemic of Childhood Myopia. Could New Indoor LED Lighting Be Part of the Solution?

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3827
Author(s):  
David Baeza Moyano ◽  
Roberto Alonso González-Lezcano
Keyword(s):  
Technological Progress ◽  
Visible Spectrum ◽  
Visible Range ◽  
Natural Light ◽  
Genetic Origin ◽  
Led Lighting ◽  
Health Authorities ◽  
The World ◽  
Children’S Work ◽  
Possible Cause

The existence of a growing myopia pandemic is an unquestionable fact for health authorities around the world. Different possible causes have been put forward over the years, such as a possible genetic origin, the current excess of children’s close-up work compared to previous stages in history, insufficient natural light, or a multifactorial cause. Scientists are looking for different possible solutions to alleviate it, such as a reduction of time or a greater distance for children’s work, the use of drugs, optometric correction methods, surgical procedures, and spending more time outdoors. There is a growing number of articles suggesting insufficient natural light as a possible cause of the increasing levels of childhood myopia around the globe. Technological progress in the world of lighting is making it possible to have more monochromatic LED emission peaks, and because of this, it is possible to create spectral distributions of visible light that increasingly resemble natural light in the visible range. The possibility of creating indoor luminaires that emit throughout the visible spectrum from purple to infrared can now be a reality that could offer a new avenue of research to fight this pandemic.

Sign in / Sign up

Export Citation Format

Share Document