Hot electron photoemission from plasmonic nanoparticles: Role of transient absorption in surface mechanism

Author(s):  
A. V. Uskov ◽  
I. E. Protsenko ◽  
R. Sh. Ikhsanov ◽  
V. E. Babicheva ◽  
S. V. Zhukovsky ◽  
...  
ACS Photonics ◽  
2015 ◽  
Vol 2 (8) ◽  
pp. 1039-1048 ◽  
Author(s):  
Viktoriia E. Babicheva ◽  
Sergei V. Zhukovsky ◽  
Renat Sh. Ikhsanov ◽  
Igor E. Protsenko ◽  
Igor V. Smetanin ◽  
...  

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ivan Ramirez ◽  
Alberto Privitera ◽  
Safakath Karuthedath ◽  
Anna Jungbluth ◽  
Johannes Benduhn ◽  
...  

AbstractStability is now a critical factor in the commercialization of organic photovoltaic (OPV) devices. Both extrinsic stability to oxygen and water and intrinsic stability to light and heat in inert conditions must be achieved. Triplet states are known to be problematic in both cases, leading to singlet oxygen production or fullerene dimerization. The latter is thought to proceed from unquenched singlet excitons that have undergone intersystem crossing (ISC). Instead, we show that in bulk heterojunction (BHJ) solar cells the photo-degradation of C60 via photo-oligomerization occurs primarily via back-hole transfer (BHT) from a charge-transfer state to a C60 excited triplet state. We demonstrate this to be the principal pathway from a combination of steady-state optoelectronic measurements, time-resolved electron paramagnetic resonance, and temperature-dependent transient absorption spectroscopy on model systems. BHT is a much more serious concern than ISC because it cannot be mitigated by improved exciton quenching, obtained for example by a finer BHJ morphology. As BHT is not specific to fullerenes, our results suggest that the role of electron and hole back transfer in the degradation of BHJs should also be carefully considered when designing stable OPV devices.


2020 ◽  
Vol 8 (42) ◽  
pp. 14834-14844
Author(s):  
Piotr Piatkowski ◽  
Sofia Masi ◽  
Pavel Galar ◽  
Mario Gutiérrez ◽  
Thi Tuyen Ngo ◽  
...  

Charge-carrier transfer (CT) from the perovskite host to PbS QDs were studied using fs-transient absorption and THz techniques. The CT rate constants increase with the size of QDs due to a change in the position of valence and conduction bands in PbS QDs.


Author(s):  
Aleksei V Siasko ◽  
Yuri B Golubovskii ◽  
Sergei Valin

Abstract The work is devoted to calculating the flux of resonance photons towards the boundary of a cylindrical discharge tube of a finite size during the propagation of a pre-breakdown ionization wave of positive polarity. A cylindrical discharge tube of finite dimensions with argon at the pressure of p=1 Torr is considered. The propagation mechanisms of metastable and resonance atoms are compared. For the considered discharge conditions, the space-time distributions of metastable and resonance atoms are calculated. The manuscript presents a technique for calculating the flux of resonance photons onto the discharge tube wall with the account of the radiation trapping. It is shown that for the studied conditions the photon flux density towards the longitudinal boundary of the tube ahead of the ionization wave can reach 1013 cm-2s-1. The obtained results allow describing the appearance of seed electrons ahead of the positive ionization wavefront during its propagation due to the electron photoemission from the discharge tube wall.


2021 ◽  
Vol 129 (12) ◽  
pp. 1493
Author(s):  
И.М. Кисляков ◽  
И.М. Белоусова ◽  
В.М. Киселев ◽  
И.В. Багров ◽  
А.М. Стародубцев ◽  
...  

The processes of photoexcitation and energy transfer in an air-saturated solution of fullerene C60 in n-methylpyrrolidone are studied. With femtosecond laser pumping at a wavelength л(p) = 520 nm, transient absorption spectra were obtained in the range 470-750 nm. Broadband absorption is observed at л > 650 nm as a result of aggregation of fullerene molecules, characterized by a short decay time of the picosecond scale. The analysis of the time dependencies indicates the presence of several processes. Within the proposed interpretation, we state a remarkable reduction in the time of singlet-triplet intersystem crossing with an increase of nanocluster size while the rapid quenching of the singlet state varies only slightly. The quantum yield of the triplet state can therefore increase, reaching 0.14. The phosphorescence spectra of singlet oxygen with a maximum at л = 1276 nm were measured with LED excitation at various wavelengths in the range 370-625 nm. The lifetime and quenching rate constant of singlet oxygen in n-methylpyrrolidone are determined. The combined quantum yield of triplet fullerene and singlet oxygen in n-methylpyrrolidone is estimated as 0.74. The efficiency spectra of the singlet oxygen photosensibilization in the C60-(n-methylpyrrolidone)-oxygen system are obtained, indicating the increasing role of large nanoclusters in this process during aging of the solution.


2019 ◽  
Vol 7 (33) ◽  
pp. 19258-19268 ◽  
Author(s):  
Indranil Mondal ◽  
Song Yi Moon ◽  
Hyunhwa Lee ◽  
Heeyoung Kim ◽  
Jeong Young Park

Optimization of structural organization between metal and semiconductor electrocatalyst reveals the hot role of quasi-epitaxial heterojunction in hot electron transfer for synergistic photocatalysis.


2001 ◽  
Vol 665 ◽  
Author(s):  
Daniel Moses ◽  
Paulo B. Miranda ◽  
Cesare Soci ◽  
Alan J. Heeger

ABSTRACTUltrafast photoinduced absorption by infrared-active vibrational modes (IRAV) is used to detect charged photo-excitations (polarons) in solid films of conjugated luminescent polymers. Experiments, carried out in zero applied electric field, show that polarons are generated within 100 fs with quantum efficiencies of approximately 10%. The ultrafast photoinduced IRAV Absorption, the weak pump-wavelength dependence, and the linear dependence of charge density on pump intensity indicate that both charged polarons and neutral excitons are independently generated even at the earliest times. Measurements of the excitation profile of the transient and steady-state photoconductivity of poly(phenylene vinylene) and its soluble derivatives over a wide spectral range up to hν = 6.2 eV indicate an apparent increase in the “photoconductivity” at hν > 3-4 eV that arises from external currents generated by electron photoemission (PE). After quenching the PE by addition of CO2+SF6 (90%:10%) into the sample chamber, the bulk photoconductivity is nearly independent of photon energy in all polymers studied, in a good agreement with the IRAV spectra. The single threshold for photoconductivity is spectrally close to the onset of π-π* absorption, behavior that is inconsistent with a large exciton binding energy.


Author(s):  
J. Michael Klopf ◽  
John L. Hostetler ◽  
Pamela M. Norris

Advancements in technologies related to thin film growth have led to astoundingly complex integrated photonic devices. The reliability of these devices relies upon the precise control of the band gap and absorption mechanisms in the thin film structures. Photon absorption in these devices can result in a reduction of laser efficiency as well as thermal runaway. To improve device performance prediction, an increased understanding of the localized absorption processes is paramount. A pump-probe technique is being developed to measure the transient absorption during hot carrier relaxation. This method relies upon the generation of hot carriers by the absorption of an intense ultrashort laser pulse. The change in reflectance due to hot carrier generation and relaxation is monitored using a probe pulse focused at the center of the excited region. The transient reflectance is measured as a function of the relative delay between the pump and probe pulses. Utilizing ultrashort laser pulses (τp ∼ 190 fs) it is possible to attain sub-picosecond resolution of the transient reflectance during hot carrier relaxation. Transient changes in the reflectance can then be related to transient changes in the absorption mechanisms of the film. Preliminary measurements made with this technique have shown clear differences in the transient reflectance of doped and undoped Indium Phosphide (InP) based films. This study will form the basis for development of a transient thermoreflectance model during hot carrier relaxation in III-V semiconductors.


Catalysts ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 376
Author(s):  
Youlong Chen ◽  
Liang Ma ◽  
Sijing Ding

Plasmonic Au-ZnO hybrids with adjustable structures (including Au-decorated ZnO and core–shell Au@ZnO with dense and porous ZnO shells) and the optimized hot electron-driven photocatalytic activity were successfully prepared. It was found that the Au@ZnO core–shell hybrids with porous morphology had the highest plasmon-enhanced photocatalytic hydrogen generation activity under visible light irradiation. The wavelength-dependent photocatalytic tests verified that Au@ZnO with porous ZnO shells had the highest apparent quantum efficiency upon resonance excitation. The ultrafast transient absorption measurements revealed that Au@ZnO with porous ZnO shells had the fastest plasmon-induced hot electron injection, which was thought to be the reason for the improved photocatalytic activity. This work might provide a promising route to designing photocatalytic and photoelectric materials.


Sign in / Sign up

Export Citation Format

Share Document