Evaluation of Low-Temperature Saturation Velocity in $\beta$ -(AlxGa1–x)2O3/Ga2O3 Modulation-Doped Field-Effect Transistors

2019 ◽  
Vol 66 (3) ◽  
pp. 1574-1578 ◽  
Author(s):  
Yuewei Zhang ◽  
Zhanbo Xia ◽  
Joe Mcglone ◽  
Wenyuan Sun ◽  
Chandan Joishi ◽  
...  
2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Naqi ◽  
Kyung Hwan Choi ◽  
Hocheon Yoo ◽  
Sudong Chae ◽  
Bum Jun Kim ◽  
...  

AbstractLow-temperature-processed semiconductors are an emerging need for next-generation scalable electronics, and these semiconductors need to feature large-area fabrication, solution processability, high electrical performance, and wide spectral optical absorption properties. Although various strategies of low-temperature-processed n-type semiconductors have been achieved, the development of high-performance p-type semiconductors at low temperature is still limited. Here, we report a unique low-temperature-processed method to synthesize tellurium nanowire networks (Te-nanonets) over a scalable area for the fabrication of high-performance large-area p-type field-effect transistors (FETs) with uniform and stable electrical and optical properties. Maximum mobility of 4.7 cm2/Vs, an on/off current ratio of 1 × 104, and a maximum transconductance of 2.18 µS are achieved. To further demonstrate the applicability of the proposed semiconductor, the electrical performance of a Te-nanonet-based transistor array of 42 devices is also measured, revealing stable and uniform results. Finally, to broaden the applicability of p-type Te-nanonet-based FETs, optical measurements are demonstrated over a wide spectral range, revealing an exceptionally uniform optical performance.


1989 ◽  
Vol 161 ◽  
Author(s):  
D.L. Dreifus ◽  
R.M. Kolbas ◽  
B.P. Sneed ◽  
J.F. Schetzina

ABSTRACTLow temperature (<60° C) processing technologies that avoid potentially damaging processing steps have been developed for devices fabricated from II-VI semiconductor epitaxial layers grown by photoassisted molecular beam epitaxy (MBE). These low temperature technologies include: 1) photolithography (1 µm geometries), 2) calibrated etchants (rates as low as 30 Å/s), 3) a metallization lift-off process employing a photoresist profiler, 4) an interlevel metal dielectric, and 5) an insulator technology for metal-insulator-semiconductor (MIS) structures. A number of first demonstration devices including field-effect transistors and p-n junctions have been fabricated from II-VI epitaxial layers grown by photoassisted MBE and processed using the technology described here. In this paper, two advanced device structures, processed at <60° C, will be presented: 1) CdTe:As-CdTe:In p-n junction detectors, grown in situ by photoassisted MBE, and 2) HgCdTe-HgTe-CdZnTe quantum-well modulation-doped field-effect transistors (MODFETs).


2020 ◽  
Vol 41 (3) ◽  
pp. 413-416 ◽  
Author(s):  
Yanan Ding ◽  
Chao Wang ◽  
Zhijie Xin ◽  
Youchao Cui ◽  
Zhen Wang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document