Delay spread statistics in a two-path radio environment

2002 ◽  
Author(s):  
K.H. Tsioumparakis ◽  
T.L. Doumi ◽  
J.G. Gardiner
Keyword(s):  
Delay Spread

scholarly journals Performance Analysis and Design Considerations of the Shallow Underwater Optical Wireless Communication System with Solar Noises Utilizing a Photon Tracing-Based Simulation Platform

Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 632
Author(s):  
Xiaozheng Wang ◽  
Minglun Zhang ◽  
Hongyu Zhou ◽  
Xiaomin Ren
Keyword(s):  
Performance Analysis ◽  
Wireless Communication ◽  
Ambient Noise ◽  
Large Scale ◽  
Delay Spread ◽  
Simulation Platform ◽  
Optical Wireless Communication ◽  
Optical Wireless ◽  
Analysis And Design ◽  
The Impact

The performance of the underwater optical wireless communication (UOWC) system is highly affected by seawater´s inherent optical properties and the solar radiation from sunlight, especially for a shallow environment. The multipath effect and degradations in signal-to-noise ratio (SNR) due to absorption, scattering, and ambient noises can significantly limit the viable communication range, which poses key challenges to its large-scale commercial applications. To this end, this paper proposes a unified model for underwater channel characterization and system performance analysis in the presence of solar noises utilizing a photon tracing algorithm. Besides, we developed a generic simulation platform with configurable parameters and self-defined scenarios via MATLAB. Based on this platform, a comprehensive investigation of underwater channel impairments was conducted including temporal and spatial dispersion, illumination distribution pattern, and statistical attenuation with various oceanic types. The impact of ambient noise at different operation depths on the bit error rate (BER) performance of the shallow UOWC system was evaluated under typical specifications. Simulation results revealed that the multipath dispersion is tied closely to the multiple scattering phenomenon. The delay spread and ambient noise effect can be mitigated by considering a narrow field of view (FOV) and it also enables the system to exhibit optimal performance on combining with a wide aperture.

scholarly journals Analysis of Non-Stationarity for 5.9 GHz Channel in Multiple Vehicle-to-Vehicle Scenarios

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3626
Author(s):  
Fang Li ◽  
Wei Chen ◽  
Yishui Shui
Keyword(s):  
Transmission Rate ◽  
Radio Channel ◽  
Vertical Direction ◽  
Statistical Characteristics ◽  
Small Scale ◽  
Delay Spread ◽  
Important Indicator ◽  
Power Delay Profile ◽  
Channel Characteristics ◽  
Vehicle To Vehicle

The vehicle-to-vehicle (V2V) radio channel is non-stationary due to the rapid movement of vehicles. However, the stationarity of the V2V channels is an important indicator of the V2V channel characteristics. Therefore, we analyzed the non-stationarity of V2V radio channels using the local region of stationarity (LRS). We selected seven scenarios, including three directions of travel, i.e., in the same, vertical, and opposite directions, and different speeds and environments in a similar driving direction. The power delay profile (PDP) and LRS were estimated from the measured channel impulse responses. The results show that the most important influences on the stationary times are the direction and the speed of the vehicles. The average stationary times for driving in the same direction range from 0.3207 to 1.9419 s, the average stationary times for driving in the vertical direction are 0.0359–0.1348 s, and those for driving in the opposite direction are 0.0041–0.0103 s. These results are meaningful for the analysis of the statistical characteristics of the V2V channel, such as the delay spread and Doppler spread. Small-scale fading based on the stationary times affects the quality of signals transmitted in the V2V channel, including the information transmission rate and the information error code rate.

scholarly journals Survey of Millimeter-Wave Propagation Measurements and Models in Indoor Environments

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1653
Author(s):  
Ahmed Al-Saman ◽  
Michael Cheffena ◽  
Olakunle Elijah ◽  
Yousef A. Al-Gumaei ◽  
Sharul Kamal Abdul Rahim ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
Measurement Techniques ◽  
Path Loss ◽  
Delay Spread ◽  
Indoor Environments ◽  
Future Trends ◽  
Signal Loss ◽  
Indoor Wireless ◽  
The Future ◽  
Future Demands

The millimeter-wave (mmWave) is expected to deliver a huge bandwidth to address the future demands for higher data rate transmissions. However, one of the major challenges in the mmWave band is the increase in signal loss as the operating frequency increases. This has attracted several research interests both from academia and the industry for indoor and outdoor mmWave operations. This paper focuses on the works that have been carried out in the study of the mmWave channel measurement in indoor environments. A survey of the measurement techniques, prominent path loss models, analysis of path loss and delay spread for mmWave in different indoor environments is presented. This covers the mmWave frequencies from 28 GHz to 100 GHz that have been considered in the last two decades. In addition, the possible future trends for the mmWave indoor propagation studies and measurements have been discussed. These include the critical indoor environment, the roles of artificial intelligence, channel characterization for indoor devices, reconfigurable intelligent surfaces, and mmWave for 6G systems. This survey can help engineers and researchers to plan, design, and optimize reliable 5G wireless indoor networks. It will also motivate the researchers and engineering communities towards finding a better outcome in the future trends of the mmWave indoor wireless network for 6G systems and beyond.

scholarly journals Interference Mitigation for Visible Light Communications in Underground Mines Using Angle Diversity Receivers

Sensors ◽  
2020 ◽  
Vol 20 (2) ◽  
pp. 367 ◽  
Author(s):  
Pablo Palacios Játiva ◽  
Milton Román Cañizares ◽  
Cesar A. Azurdia-Meza ◽  
David Zabala-Blanco ◽  
Ali Dehghan Firoozabadi ◽  
...  
Keyword(s):  
Visible Light ◽  
Mine Working ◽  
Channel Model ◽  
Underground Mining ◽  
Cumulative Distribution ◽  
Line Of Sight ◽  
Delay Spread ◽  
Noise Power ◽  
Working Face ◽  
Angle Diversity

This paper proposes two solutions based on angle diversity receivers (ADRs) to mitigate inter-cell interference (ICI) in underground mining visible light communication (VLC) systems, one of them is a novel approach. A realistic VLC system based on two underground mining scenarios, termed as mining roadway and mine working face, is developed and modeled. A channel model based on the direct component in line-of-sight (LoS) and reflections of non-line-of-sight (NLoS) links is considered, as well as thermal and shot noises. The design and mathematical models of a pyramid distribution and a new hemi-dodecahedral distribution are addressed in detail. The performances of these approaches, accompanied by signal combining schemes, are evaluated with the baseline of a single photo-diode in reception. Results show that the minimum lighting standards established in both scenarios are met. As expected, the root-mean-square delay spread decreases as the distance between the transmitters and receivers increases. Furthermore, the hemi-dodecahedron ADR in conjunction with the maximum ratio combining (MRC) scheme, presents the best performance in the evaluated VLC system, with a maximum user data rate of 250 Mbps in mining roadway and 120 Mbps in mine working face, received energy per bit/noise power of 32 dB and 23 dB, respectively, when the bit error rate corresponds to 10 − 4 , and finally, values of 120 dB in mining roadway and 118 dB in mine working face for signal-to-interference-plus-noise ratio are observed in a cumulative distribution function.

scholarly journals PHY, MAC, and RLC Layer Based Estimation of Optimal Cyclic Prefix Length

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4796
Author(s):  
Adriana Lipovac ◽  
Vlatko Lipovac ◽  
Borivoj Modlic
Keyword(s):  
Error Recovery ◽  
Cyclic Prefix ◽  
Closed Form Expression ◽  
Delay Spread ◽  
Radio Link ◽  
Medium Access ◽  
Power Delay Profile ◽  
Rms Delay Spread ◽  
Industry Standard ◽  
New Radio

This work is motivated by growing evidence that the standard Cyclic Prefix (CP) length, adopted in the Long Term Evolution (LTE) physical layer (PHY) specifications, is oversized in propagation environments ranging from indoor to typical urban. Although this ostensibly seems to be addressed by 5G New Radio (NR) numerology, its scalable CP length reduction is proportionally tracked by the OFDM symbol length, which preserves the relative CP overhead of LTE. Furthermore, some simple means to optimize fixed or introduce adaptive CP length arose from either simulations or models taking into account only the bit-oriented PHY transmission performance. On the contrary, in the novel crosslayer analytical model proposed here, the closed-form expression for the optimal CP length is derived such as to minimize the effective average codeblock length, by also considering the error recovery retransmissions through the layers above PHY—the Medium Access Control (MAC) and the Radio Link Control (RLC), in particular. It turns out that, for given protective coding, the optimal CP length is determined by the appropriate rms delay spread of the channel power delay profile part remaining outside the CP span. The optimal CP length values are found to be significantly lower than the corresponding industry-standard ones, which unveils the potential for improving the net throughput.

Directional Delay Spread and Interference Quotient Analysis in sub-7GHz Wi-Fi Bands

2020 ◽  
Author(s):  
Jorge Gomez-Ponce ◽  
Daoud Burghal ◽  
Naveed A. Abbasi ◽  
Arjun Hariharan ◽  
Gopal Jakhetia ◽  
...  
Keyword(s):  
Delay Spread

scholarly journals Performance Analysis of MIMO STBC System in Flat Fading and Frequency Selective Fading Channels

2019 ◽  
Vol 3 (1) ◽  
pp. 19
Author(s):  
Pebri Yeni Samosir ◽  
Nyoman Pramaita ◽  
I Gst A. Komang Diafari Djuni Hartawan ◽  
Ni Made Ary Esta Dewi Wirastuti
Keyword(s):  
Fading Channels ◽  
System Performance ◽  
Mimo System ◽  
Multipath Fading ◽  
Delay Spread ◽  
Selective Fading ◽  
Frequency Selective Fading ◽  
Flat Fading ◽  
Frequency Selective ◽  
Frequency Selective Fading Channels

Multiple Input Multiple Output (MIMO) technology is a technique that can be used to overcome multipath fading. The multipath fading is caused by signals coming from several paths that experience different attenuations, delays and phases. In a multipath condition, an impulse that sent by the transmitter, will be received by the recipient not as an impulse but as a pulse with a spread width that called delay spread. Delay spread can cause intersymbol interference (ISI) and bit translation errors from the information received. To determine the effect of delay spread on the MIMO system, then MIMO system performance research was performed on flat fading and frequency selective fading channels using the Space Time Block Code (STBC) coding technique. This research was conducted using MatLab 2018a software. The simulation results show that the MIMO STBC system performance on flat fading channels is better than the MIMO STBC system performance on the frequency selective fading channel. This result is analyzed based on the value of BER vs. Eb/No and eye diagram.

Sign in / Sign up

Export Citation Format

Share Document