scholarly journals Biosynthesized gold nanoparticles supported on magnetic chitosan matrix as catalyst for reduction of 4-nitrophenol

2019 ◽  
Vol 15 (3) ◽  
pp. 451-455
Author(s):  
Norfazreen Saffee ◽  
Mustaffa Shamsuddin ◽  
Khairil Juhanni Abd Karim
Keyword(s):  
Gold Nanoparticles ◽  
Analytical Data ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Average Particle ◽  
Complexation Reaction ◽  
Bending Vibration ◽  
Tem Analysis ◽  
Magnetic Chitosan ◽  
Jcpds File

The design and environmentally-safe synthesis of magnetically recoverable solid-supported metal nanoparticles with remarkable stability and catalytic performance has significant industrial importance. In the present study, we have developed an inexpensive bioinspired approach for assembling gold nanoparticles (AuNPs) in magnetic chitosan network under green, mild and scalable condition. AuNPs were well loaded on the surface of the magnetic support due to the presence of hydroxyl (-OH) and amino (-NH2) groups in chitosan molecules that provided the driving force for the complexation reaction with the Au(III) ions. Reduction of the Au(III) to Au(0) is achieved by using Melicope ptelefolia aqueous leaf extract. The synthesized magnetic chitosan supported biosynthesized Au nanocatalyst was characterized using Fourier Transform Infrared (FT-IR), Carbon, Hydrogen and Nitrogen (CHN), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD) and Atomic Absorption Spectroscopy (AAS) analyses. FTIR spectrum of magnetic chitosan shows peaks at 1570 cm-1 indicative of N-H bending vibration and at 577 cm-1 which designates the Fe-O bond. CHN analytical data further supported the coating of chitosan onto the magnetite. TEM analysis shows an amorphous layer around the magnetite core which supported the coating of chitosan on the magnetite surface and the average particle size of AuNPs calculated was 7.34 ± 2.19 nm. XRD analysis shows six characteristics peaks for magnetite corresponding to lattice planes (220), (311), (400), (422), (511) and (440) in both the magnetite and magnetic chitosan samples (JCPDS file, PDF No. 65-3107). Meanwhile, XRD analysis of catalyst shows characteristic peaks of AuNPs at 2q (38.21°, 44.38°, 62.2°, 77.32° and 80.76°) are corresponding to (111), (200), (220), (311) and (222) lattice plane (JCPDS file, PDF No.04-0784). AAS analysis shows the loading of AuNPs as 5.4%. The rate constant achieved for the reduction of 4-nitrophenol to 4-aminophenol in the presence of hydrazine hydrate using 10 mg of catalyst is 0.0046 s-1. The magnetic chitosan supported AuNPs is effective as catalyst for the reduction of 4-nitrophenol.

scholarly journals Synthesis of Gold Nanoparticles by Using Green Machinery: Characterization and In Vitro Toxicity

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 808
Author(s):  
Ahmed Al Saqr ◽  
El-Sayed Khafagy ◽  
Ahmed Alalaiwe ◽  
Mohammed F. Aldawsari ◽  
Saad M. Alshahrani ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Average Particle Size ◽  
In Vitro Cytotoxicity ◽  
In Vitro Toxicity ◽  
Cervical Cancer Cell Line ◽  
Average Particle ◽  
Anticancer Activities ◽  
Tem Analysis ◽  
Benincasa Hispida

Green synthesis of gold nanoparticles (GNPs) with plant extracts has gained considerable interest in the field of biomedicine. Recently, the bioreduction nature of herbal extracts has helped to synthesize spherical GNPs of different potential from gold salt. In this study, a fast ecofriendly method was adopted for the synthesis of GNPs using fresh peel (aqueous) extracts of Benincasa hispida, which acted as reducing and stabilizing agents. The biosynthesized GNPs were characterized by UV–VIS and Fourier transform infrared spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering. In addition, the in vitro antibacterial and anticancer activities of synthesized GNPs were investigated. The formation of gold nanoparticles was confirmed by the existence of a sharp absorption peak at 520 nm, corresponding to the surface plasmon resonance (SPR) band of the GNPs. TEM analysis revealed that the prepared GNPs were spherical in shape and had an average particle size of 22.18 ± 2 nm. Most importantly, the synthesized GNPs exhibited considerable antibacterial activity against different Gram-positive and Gram-negative bacteria. Furthermore, the biosynthesized GNPs exerted remarkable in vitro cytotoxicity against human cervical cancer cell line, while sparing normal human primary osteoblast cells. Such cytotoxic effect was attributed to the increased production of reactive oxygen species (ROS) that contributed to the damage of HeLa cells. Collectively, peel extracts of B. hispida can be efficiently used for the synthesis of GNPs, which can be adopted as a natural source of antimicrobial and anticancer agent.

Effect of Rare Earth Doped Elements and Characterization of LaF3:Ln3+ (Ln3+= Ce3+, Pr3+, Nd3+) Nanocrystals

2012 ◽  
Vol 585 ◽  
pp. 174-178 ◽  
Author(s):  
S.G. Gaurkhede ◽  
M.M. Khandpekar ◽  
S.P. Pati ◽  
A.T. Singh
Keyword(s):  
Rare Earth ◽  
Second Harmonic ◽  
Average Particle Size ◽  
Potassium Dihydrogen Phosphate ◽  
Xrd Analysis ◽  
Dihydrogen Phosphate ◽  
Average Particle ◽  
Tem Analysis ◽  
20 Nm

Abstract. LaF3 nanocrystals doped with lanthanides like Ce3+, Pr3+ and Nd3+ have been prepared using microwave technique. These synthesized crystals have been characterized by X-ray powder diffraction. Well dispersed, elongated, nanorods of hexagonal geometry (approximately 20nm in size) have been found in TEM analysis. The average particle size estimated from XRD analysis is about 20 nm and is in close agreement with the TEM results. Four characteristic peaks one at 3434 cm-1 (broad) and other at 2924, 2853, 1632 cm-1(sharp) have been observed in the FTIR spectra. Intense Blue colour (458 nm) emission has been recorded when crystals are excited with photons of wavelength 254 nm. Non Linear Optical (NLO) properties of the synthesized nanocrystals have been studied. It has been found that second harmonic generation (SHG) efficiency of the prepared samples containing rare earth elements is less than pure Potassium dihydrogen phosphate (KDP) crystals.

scholarly journals Characterization of Silver Nanoparticles Synthesized using Chemical Method and its Antibacterial Property

2020 ◽  
Vol 10 (6) ◽  
pp. 7257-7264
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Silver Nanoparticles ◽  
Bacillus Subtilis ◽  
Average Particle Size ◽  
Chemical Properties ◽  
Xrd Analysis ◽  
Solid Particles ◽  
Average Particle ◽  
Face Centered Cubic ◽  
Tem Analysis

Metal nanoparticles are gaining importance nowadays in nanoscience. The nanoparticle had better physical and chemical properties compared with solid particles due to their large surface area. The silver nanoparticles are employed mostly in medical and electrical applications having outstanding conductivity and antimicrobial activity. In the present investigation, NaBH4 and ethanol were used as a reductant and stabilizer agent from silver nitrate salt as a precursor. The silver nanoparticles obtained were characterized using Fourier-transform infrared spectroscopy (FT-IR), X-Ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) to determine their morphology and size. In XRD analysis, the average particle size was found to be 18.31 nm. The TEM analysis shows crystalline morphology with a face-centered cubic structure. The antibacterial activity was tested against two bacterial cultures, namely Bacillus subtilis and Pseudomonas aeruginosa. The inhibition zones of 19mm and 17mm were observed against Bacillus subtilis and Pseudomonas aeruginosa, respectively.

Synthesis of Cu Loaded TiO2 Nanoparticles for the Improved Photocatalytic Degradation of Rhodamine B

2016 ◽  
Vol 15 (05n06) ◽  
pp. 1660002 ◽  
Author(s):  
V. Kavitha ◽  
P. S. Ramesh ◽  
D. Geetha
Keyword(s):  
Titanium Dioxide ◽  
Rhodamine B ◽  
Sol Gel ◽  
Average Particle Size ◽  
Visible Spectrum ◽  
Xrd Analysis ◽  
Bandgap Energy ◽  
Average Particle ◽  
Titanium Tetraisopropoxide ◽  
Photoexcited Electron

Copper doped Titanium dioxide TiO2 nanoparticles were synthesized by sol–gel method using titanium tetraisopropoxide and copper sulfate as precursors. The synthesized nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), UV-Visible spectroscopy (UV-Vis), Photoluminesce spectroscopy (PL) and atomic force microscopy (AFM). XRD analysis confirms the formation of anatase titanium dioxide and average particle size was 35[Formula: see text]nm. Cu– TiO2 exhibits a shift in the absorption edge toward visible spectrum. The rate of recombination and transfer behavior of the photoexcited electron–hole pairs in the semiconductors was recorded by photoluminescence. From SEM spherical shaped nanoparticles was observed. Comparing with pure TiO2 nanoparticles, Cu doped TiO2 photocatalyst exhibited enhanced photocatalytic activity under natural sunlight irradiation in the decomposition of rhodamine B aqueous solution. The maximum 97% of degradation efficiency of Rhodamine B was observed at 0.6% Cu–TiO2 within 180[Formula: see text]min. The photocatalytic efficiency of Rhodamine B of Cu doped TiO2 nanoparticle was higher than the pure TiO2, which could be attributed to the small crystallinity intense light absorption in Sunlight and narrow bandgap energy of Copper.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

scholarly journals A Comparative Study of Nanostructures of CuO/Cu2O Fabricated via Potentiostatic and Galvanostatic Anodization

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
S. Mary Margaret ◽  
Albin John P. Paul Winston ◽  
S. Muthupandi ◽  
P. Shobha ◽  
P. Sagayaraj
Keyword(s):  
Thermal Stability ◽  
Comparative Study ◽  
Aqueous Electrolyte ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Molecular Vibration ◽  
Synthesis Process ◽  
Average Particle ◽  
Good Crystallinity ◽  
Cu Foil

A detailed comparative study on the synthesis process of coral-like CuO/Cu2O nanorods (NRs) and nanopolycrystals (NPCs) fabricated on Cu foil employing aqueous electrolyte via potentiostatic (POT) and galvanostatic (GAL) modes is discussed. The structural, morphological, thermal, compositional, and molecular vibration of the prepared CuO/Cu2O nanostructures was characterized by XRD, HRSEM, TG/DTA, FTIR, and EDX techniques. XRD analysis confirmed the crystalline phase of the formation of monoclinic CuO and cubic Cu2O nanostructures with well-defined morphology. The average particle size was found to be 21.52 nm and 26.59 nm for NRs (POT) and NPCs (GAL), respectively, and this result is corroborated from the HRSEM analysis. POT synthesized nanoparticle depicted a higher thermal stability up to 600°C implying that the potentiostatically grown coral-like NRs exhibit a good crystallinity and well-ordered morphology.

scholarly journals Sintesis Nanopartikel Perak Menggunakan Ekstrak Daun Kluwak Pangium edule Reinw Sebagai Bioreduktor dan Uji Aktivitasnya Sebagai Antioksidan

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Indrawati Patabang ◽  
Syahruddin Kasim ◽  
Paulina Taba
Keyword(s):  
Antioxidant Activity ◽  
Particle Size ◽  
Silver Nanoparticles ◽  
Leaf Extract ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Average Particle ◽  
Result Show ◽  
Ic50 Values ◽  
Show Result

Silver nanoparticles have been synthesized using kluwak leaf extract (Pangium edule Reinw) as bioreductor and antioxidant activity assay. The nanoparticles formed were monitored by observing UV-Vis absorption and characterized by using FTIR, PSA, XRD and SEM instruments. The result of functional group characterization with FTIR show that the functional groups OH, C = O, C-O and CH2 act as Ag+ reducing agent. The size of silver nanoparticles was determined by using Particle Size Analyzer (PSA) and the result show average particle size distribution of 93.2 nm. Morphology of AgNp were observed by Scanning Electron Microscope (SEM) and X-Ray Difraction (XRD) analysis show result of 51,78 nm. The antioxidant activity was shown by in kluwak leaf extract and silver nanoparticles with IC50 values respectively 831,33 ppm dan 1493,09 ppm.

Fe3O4 Magnetic Preparation by Bauxite Ore Washing Fine Mud

2014 ◽  
Vol 1010-1012 ◽  
pp. 961-965
Author(s):  
Jian Qiang Xiao ◽  
Guo Wei He ◽  
Yan Jin Hu
Keyword(s):  
Particle Size ◽  
Aging Time ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Test Methods ◽  
Raw Material ◽  
Molar Ratio ◽  
Average Particle ◽  
Experimental Conditions ◽  
Particle Size Analyzer

Bauxite waste sludge as a raw material, the use of reverse chemical coprecipitation synthesize Fe3O4. Researching temperature, precipitation concentration, aging time and Fe2+/Fe3+ molar ratio effect on the particle size, morphology. Optimal experimental conditions: temperature 70 °C, the precipitant NaOH mass ratio of 10%, aging time 3h, Fe2+/Fe3+ molar ratio of 2:3. Test methods using a laser particle size analyzer, XRD analysis of the products were characterized, the product is Fe3O4, the average particle size of 0.11mm.

scholarly journals Synthesis of Green Copper Nanoparticles Using Medicinal Plant Hagenia abyssinica (Brace) JF. Gmel. Leaf Extract: Antimicrobial Properties

2020 ◽  
Vol 2020 ◽  
pp. 1-12 ◽  
Author(s):  
H. C. Ananda Murthy ◽  
Tegene Desalegn ◽  
Mebratu Kassa ◽  
Buzuayehu Abebe ◽  
Temesgen Assefa
Keyword(s):  
Medicinal Plant ◽  
Copper Nanoparticles ◽  
Leaf Extract ◽  
Energy Gap ◽  
Spectral Band ◽  
Average Particle Size ◽  
Antimicrobial Properties ◽  
Xrd Analysis ◽  
Average Particle ◽  
Hagenia Abyssinica

Indigenous medicinal plant of Ethiopia has been applied for the first time to investigate the synergistic influence of phytoconstituents in green copper nanoparticles (g-Cu NPs) towards the enhancement of antimicrobial properties of NPs. We report the green synthesis of Cu NPs using Hagenia abyssinica (Brace) JF. Gmel. leaf extract. The synthesized g-Cu NPs were characterized by UV-visible, UV-DRS, FT-IR, XRD, SEM, EDXA, TEM, HRTEM, and SAED techniques. The maximum absorbance, λmax, was found to be 403 nm for g-Cu NPs due to surface plasmon resonance. The energy gap, Eg of NPs, was found to be 2.19 eV. FTIR spectra confirmed the presence of polyphenols, tannins, and glycosides in the leaf extract of Hagenia abyssinica. The spectral band at 740 cm-1 is a characteristic of interaction between Cu and biomolecules of the extract. The XRD analysis revealed that the g-Cu NPs appears to be more crystalline in nature. SEM and TEM micrographs showed a mix of spherical, hexagonal, triangular, cylindrical, and irregularly shaped Cu particles. The average particle size of NPs was found to be 34.76 nm by ImageJ analysis. EDX analysis confirmed the presence of copper in the g-Cu NPs. In addition, the SAED pattern of g-Cu NPs presented concentric circular patterns for 4 major planes of crystalline copper and its oxides. The experimental and calculated d-spacing values of one of the crystal planes (111) were found to be 0.2432 nm and 0.2444 nm, respectively. The d-spacing values of 0.2444 nm and 0.2040 nm correspond to d111Cu2O and d111Cu lattice fringes, respectively. The antibacterial test conducted on E. coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis showed good zone of inhibitions 12.7, 12.7, 14.7, and 14.2 mm, respectively, proving potentiality of g-Cu NPs as a remedy for infectious diseases caused by tested pathogens.

scholarly journals Facile Microemulsion Synthesis of Vanadium-Doped ZnO Nanoparticles to Analyze the Compositional, Optical, and Electronic Properties

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 821 ◽  
Author(s):  
H.S. Ali ◽  
Ali Alghamdi ◽  
G. Murtaza ◽  
H.S. Arif ◽  
Wasim Naeem ◽  
...  
Keyword(s):  
Zno Nanoparticles ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Attenuated Total Reflection ◽  
Lattice Parameters ◽  
Average Particle ◽  
Structural Morphology ◽  
Wurtzite Phase ◽  
X Ray ◽  
Doped Zno

In this work, microemulsion method has been followed to synthesize vanadium-doped Zn1−xVxO (with x = 0.0, 0.02, 0.04, 0.06, 0.08, and 0.10) nanoparticles. The prepared samples are characterized by several techniques to investigate the structural, morphology, electronic, functional bonding, and optical properties. X-ray diffractometer (XRD) analysis confirms the wurtzite phase of the undoped and V-doped ZnO nanoparticles. Variation in the lattice parameters ensures the incorporation of vanadium in the lattice of ZnO. Scanning electron microscopy (SEM) shows that by increasing contents of V ions, the average particle size increases gradually. X-ray Absorption Near Edge Spectroscopy (XANES) at the V L3,2 edge, oxygen K-edge, and Zn L3,2 edge reveals the presence and effect of vanadium contents in the Zn host lattice. Furthermore, the existence of chemical bonding and functional groups are also asserted by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). UV–Visible analysis shows that by increasing V+ contents, a reduction up to 2.92 eV in the energy band gap is observed, which is probably due to an increase in the free electron concentration and change in the lattice parameters.

Sign in / Sign up

Export Citation Format

Share Document