scholarly journals Synthesis of Gold Nanoparticles by Using Green Machinery: Characterization and In Vitro Toxicity

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 808
Author(s):  
Ahmed Al Saqr ◽  
El-Sayed Khafagy ◽  
Ahmed Alalaiwe ◽  
Mohammed F. Aldawsari ◽  
Saad M. Alshahrani ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Average Particle Size ◽  
In Vitro Cytotoxicity ◽  
In Vitro Toxicity ◽  
Cervical Cancer Cell Line ◽  
Average Particle ◽  
Anticancer Activities ◽  
Tem Analysis ◽  
Benincasa Hispida

Green synthesis of gold nanoparticles (GNPs) with plant extracts has gained considerable interest in the field of biomedicine. Recently, the bioreduction nature of herbal extracts has helped to synthesize spherical GNPs of different potential from gold salt. In this study, a fast ecofriendly method was adopted for the synthesis of GNPs using fresh peel (aqueous) extracts of Benincasa hispida, which acted as reducing and stabilizing agents. The biosynthesized GNPs were characterized by UV–VIS and Fourier transform infrared spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering. In addition, the in vitro antibacterial and anticancer activities of synthesized GNPs were investigated. The formation of gold nanoparticles was confirmed by the existence of a sharp absorption peak at 520 nm, corresponding to the surface plasmon resonance (SPR) band of the GNPs. TEM analysis revealed that the prepared GNPs were spherical in shape and had an average particle size of 22.18 ± 2 nm. Most importantly, the synthesized GNPs exhibited considerable antibacterial activity against different Gram-positive and Gram-negative bacteria. Furthermore, the biosynthesized GNPs exerted remarkable in vitro cytotoxicity against human cervical cancer cell line, while sparing normal human primary osteoblast cells. Such cytotoxic effect was attributed to the increased production of reactive oxygen species (ROS) that contributed to the damage of HeLa cells. Collectively, peel extracts of B. hispida can be efficiently used for the synthesis of GNPs, which can be adopted as a natural source of antimicrobial and anticancer agent.

scholarly journals Biosynthesized gold nanoparticles supported on magnetic chitosan matrix as catalyst for reduction of 4-nitrophenol

2019 ◽  
Vol 15 (3) ◽  
pp. 451-455
Author(s):  
Norfazreen Saffee ◽  
Mustaffa Shamsuddin ◽  
Khairil Juhanni Abd Karim
Keyword(s):  
Gold Nanoparticles ◽  
Analytical Data ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Average Particle ◽  
Complexation Reaction ◽  
Bending Vibration ◽  
Tem Analysis ◽  
Magnetic Chitosan ◽  
Jcpds File

The design and environmentally-safe synthesis of magnetically recoverable solid-supported metal nanoparticles with remarkable stability and catalytic performance has significant industrial importance. In the present study, we have developed an inexpensive bioinspired approach for assembling gold nanoparticles (AuNPs) in magnetic chitosan network under green, mild and scalable condition. AuNPs were well loaded on the surface of the magnetic support due to the presence of hydroxyl (-OH) and amino (-NH2) groups in chitosan molecules that provided the driving force for the complexation reaction with the Au(III) ions. Reduction of the Au(III) to Au(0) is achieved by using Melicope ptelefolia aqueous leaf extract. The synthesized magnetic chitosan supported biosynthesized Au nanocatalyst was characterized using Fourier Transform Infrared (FT-IR), Carbon, Hydrogen and Nitrogen (CHN), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD) and Atomic Absorption Spectroscopy (AAS) analyses. FTIR spectrum of magnetic chitosan shows peaks at 1570 cm-1 indicative of N-H bending vibration and at 577 cm-1 which designates the Fe-O bond. CHN analytical data further supported the coating of chitosan onto the magnetite. TEM analysis shows an amorphous layer around the magnetite core which supported the coating of chitosan on the magnetite surface and the average particle size of AuNPs calculated was 7.34 ± 2.19 nm. XRD analysis shows six characteristics peaks for magnetite corresponding to lattice planes (220), (311), (400), (422), (511) and (440) in both the magnetite and magnetic chitosan samples (JCPDS file, PDF No. 65-3107). Meanwhile, XRD analysis of catalyst shows characteristic peaks of AuNPs at 2q (38.21°, 44.38°, 62.2°, 77.32° and 80.76°) are corresponding to (111), (200), (220), (311) and (222) lattice plane (JCPDS file, PDF No.04-0784). AAS analysis shows the loading of AuNPs as 5.4%. The rate constant achieved for the reduction of 4-nitrophenol to 4-aminophenol in the presence of hydrazine hydrate using 10 mg of catalyst is 0.0046 s-1. The magnetic chitosan supported AuNPs is effective as catalyst for the reduction of 4-nitrophenol.

scholarly journals BOOSTING THE SKIN DELIVERY OF CURCUMIN THROUGH STEARIC ACID-ETHYL CELLULOSE BLEND HYBRID NANOCARRIERS-BASED APPROACH FOR MITIGATING PSORIASIS

2021 ◽  
pp. 150-164
Author(s):  
PANKAJ KUMAR JAISWAL ◽  
SANJOY DAS ◽  
MALAY K. DAS
Keyword(s):  
Therapeutic Efficacy ◽  
Skin Permeation ◽  
Average Particle Size ◽  
Hybrid Nanoparticles ◽  
Psoriatic Skin ◽  
Average Particle ◽  
In Vivo Evaluation ◽  
Tem Analysis ◽  
Skin Delivery

Objective: Curcumin presents poor topical bioavailability when administered orally, which poses a major hurdle in its use as an effective therapy for the management of psoriasis. The present study reports the utilization of lipid-polymer hybrid nanoparticles (LPHNPs) for the topical delivery of curcumin which can be a potential approach for mitigating psoriasis. Methods: Curcumin-loaded LPHNPs were prepared by the emulsification solvent evaporation method and characterized. The optimized Curcumin-loaded LPHNPs (DLN-3) were further incorporated into 2% Carbopol 940 gels and evaluated for its therapeutic efficacy in the Imiquimod (IMQ)-induced psoriasis rat model. Results: The average particle size, polydispersity index, zeta potential, drug entrapment and loading efficiency for DLN-3 were found to be 200.9 nm, 0.342,-28.3 mV, 87.40±0.99% and 4.57±0.04%, respectively. FT-IR, DSC and XRD studies confirmed that all the components used for the formulation are compatible with each other, whereas SEM and TEM analysis affirmed the spherical shape of LPHNPs with a smooth surface. The in vitro drug release studies suggest that curcumin was released from the LPHNPs in a sustained manner over a period of 24 h via super case II transport mechanism. Results of in vitro skin permeation study revealed that 38.39±2.67% of curcumin permeated at 12 h across excised pig ear skin with a permeation flux of 18.74±3.59 µg/cm2/h. Further, in vivo evaluation and histopathological studies demonstrated that NLHG-1 hydrogels showed better therapeutic efficacy against the psoriatic skin lesions than the standard marketed gels. Conclusion: These results suggest that the developed LPHNPs have a superior ability to improve the skin penetration or accumulation of DLN-3 within psoriatic skin and offer a potential delivery system for the management of psoriasis.

scholarly journals Development and Evaluation of Lyophilized Methotrexate Nanosuspension using Quality by Design Approach

2021 ◽  
Vol 68 (4) ◽  
pp. 861-881
Author(s):  
Trupti Powar ◽  
Ashok Hajare ◽  
Ravindra Jarag ◽  
Sopan Nangare
Keyword(s):  
Central Composite Design ◽  
Quality By Design ◽  
Average Particle Size ◽  
In Vitro Cytotoxicity ◽  
Average Particle ◽  
Formulation Development ◽  
Process Factors ◽  
The Impact ◽  
Central Composite

With the application of the quality by design (QbD) approach, a high-pressure homogenizer (HPH) methodology was employed to develop methotrexate nanosuspension (MTX-NS) to boost bioavailability. The Ishikawa diagram was used to analyze potential risk factors in formulation development. To screen and study the impact of various formulation and process factors on the critical quality attributes (CQA), the Placket–Burman design and central composite design were utilized. The number of HPH cycles, poloxamer 188 concentration, and tween 80 concentration were shown to be significant parameters (P<0.05), that were further optimized using Central Composite Design. The zeta potential of optimized lyophilized MTX-NS was determined to be –11.6 ± 7.52 mV and the average particle size was 260 ± 0.25 nm. In vitro cytotoxicity experiments revealed a greater than 80% inhibition, with apoptotic cells shrinking, fragmentation, and cell death. Furthermore, the Cmax and AUC0-t were increased by 2.53 and 8.83 folds, respectively. The relative bioavailability of MTX-NS was found to be 8.83 times higher than that of MTX-aqueous dispersion. As a result, the QbD method resulted in the development of a lyophilized MTX-NS with process understanding and control based on quality risk management.

scholarly journals COLON SPECIFIC DELIVERY OF COMBINATION OF 5-FLUOROURACIL AND CELECOXIB: PREPARATION, CHARACTERIZATION, AND IN VITRO CYTOTOXICITY ASSAY

2019 ◽  
pp. 193-198
Author(s):  
VIKAS BANSAL ◽  
ANJOO KAMBOJ ◽  
JITENDER MADAN
Keyword(s):  
Drug Delivery ◽  
Colon Cancer ◽  
Drug Loading ◽  
Average Particle Size ◽  
In Vitro Cytotoxicity ◽  
Average Particle ◽  
Ic50 Value ◽  
S 100 ◽  
Ht 29

Objective: 5-Fluorouracil (5-FU) and celecoxib (Cel) combination offered additive effect in the treatment of colon cancer. However, physicochemical and biopharmaceutical attributes of both drugs deliver suboptimal concentration at the site of action. The objective of the current study is the development of a microparticulate drug delivery system loaded with a combination of 5-FU and Cel to achieve prolonged drug delivery in colon cancer. Methods: 5-FU and Cel combination were loaded in Eudragit coated chitosan (CH) microspheres (MSs) and characterized. Results: The average particle size of the MSs was in the range of 2.7±0.9μm to 4.8±1.1μm. A substantial drug encapsulation efficiency of 71.30±2.3% as obtained for 5-FU as compared to 35.20±1.9% of Cel in the tailored microparticles. The drug loading capacity of 6.5 mg/10 mg and 2.3 mg/10 mg was obtained for 5-FU and Cel, respectively. By Eudragit S 100 (Ed) coating, significant pH-dependent release profile was achieved, and no drug release was observed in simulated gastric and intestinal fluids. The developed MSs exhibited the release of 92.1±2.9% of 5-FU in 8h whereas 18.9±0.7% Cel was found to be released from the developed MSs. The drug-loaded MSs exhibited appreciable potency against HT-29 cells with an IC50 value of 35.9 μM. Conclusion: The results indicated that these microparticles are a promising vehicle for selectively targeting drugs to the colon in the chemotherapy of colon cancer.

Mesoporous Silica Nanoparticles of Hydroxyurea: Potential

2020 ◽  
Vol 10 ◽  
Author(s):  
Kumar Nishchaya ◽  
Swatantra K.S. Kushwaha ◽  
Awani Kumar Rai
Keyword(s):  
Drug Release ◽  
Silica Nanoparticles ◽  
Mesoporous Silica Nanoparticles ◽  
Release Kinetics ◽  
Average Particle Size ◽  
Silica Nanoparticle ◽  
Average Particle ◽  
Independent Variables ◽  
Lower Temperature

Background: Present malignant cancer medicines has the advancement of magnetic nanoparticles as delivery carriers to magnetically accumulate anticancer medication in malignant growth tissue. Aim: In the present investigation, a silica nanoparticles (MSNs) stacked with hydroxyurea were combined and was optimized for dependent and independent variables. Method: In this study, microporous silica nanoparticle stacked with neoplastic medication had been prepared through emulsification followed with solvent evaporation method. Prepared MSNs were optimized for dependent and independent variables. Different formulations were prepared with varying ratio of polymer, lipid and surfactant which affects drug release and kinetics of drug release pattern. The obtained MSNs were identified by FTIR, SEM, drug entrapment, in-vitro drug release, drug release kinetics study, stability testing in order to investigate the nanoparticle characteristics. Results: The percentage drug entrapment of the drug for the formulations F1, F2, F3, was found to be 27.78%, 65.52% and 48.26%. The average particle size for F2 formulation was found to be 520 nm through SEM. The cumulative drug release for the formulations F1, F2, F3 was found to be 64.17%, 71.82% and 32.68%. The formulations were found to be stable which gives controlled drug delivery for 6 hours. Conclusion: From the stability studies data it can be culminated that formulations are most stable when stored at lower temperature or in refrigerator i.e. 5˚C ± 3˚C. It can be concluded that MSN’s loaded with hydroxyurea is a promising approach towards the management of cancer due to its sustained release and less side effects.

Preparation and Characterization of Terpenoid-Encapsulated PLGA Microparticles and its Antibacterial Activity against Enterococcus faecalis

2019 ◽  
Vol 829 ◽  
pp. 263-269
Author(s):  
Denny Nurdin ◽  
Andri Hardiansyah ◽  
Elsy Rahimi Chaldun ◽  
Anti Khoerul Fikkriyah ◽  
Hendra Dian Adhita Dharsono ◽  
...  
Keyword(s):  
Enterococcus Faecalis ◽  
Average Particle Size ◽  
Poly Vinyl Alcohol ◽  
Prolonged Release ◽  
Average Particle ◽  
Plga Microparticles ◽  
Assay Result ◽  
Result Show ◽  
One Step

Exploration of natural compound for the treatment of dental-related problems are gaining of interest for enhancing therapeutic efficacy of the drugs delivery system. In this study, we have prepared terpenoid, which have been isolated from Myrmecodia pendens Merr & Perry from Papua Island, Indonesia, to be encapsulated in Polylactic-co-glycolic acid (PLGA), as the most widely used biodegradable polymer for biomedical applications, through one step single-emulsion method followed by subsequent coating by poly (vinyl alcohol) (PVA). The resultant of terpenoid-loaded PLGA microparticles were characterized systematically through scanning electron microscope and Fourier-transform infrared spectroscopy. In vitro drug release test was evaluated through dialysis method. Antibacterial test was conducted against Enterococcus faecalis as a model for persistent bacteria that causes root canal infections. The results showed that terpenoid-loaded PLGA microparticles were developed in spherical morphology with an average particle size of around 1-2μm. Terpenoid released from PLGA compartment at pH 6.5 and temperature of 37°C through a controlled-release profile mechanism with enhanced prolonged release. The bacterial assay result showed that terpenoid-loaded PLGA microparticles could reduce Enterococcus faecalis, effectively. Eventually, these result show that terpenoid-loaded PLGA microparticles as unique natural product-based extract could be developed as a potential naturally-based drug for dental-related diseases applications.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

scholarly journals Interaction of Soy Protein Isolate Hydrolysates with Cyanidin-3-O-Glucoside and Its Effect on the In Vitro Antioxidant Capacity of the Complexes under Neutral Condition

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1721
Author(s):  
Yaru Wu ◽  
Zhucheng Yin ◽  
Xuejiao Qie ◽  
Yao Chen ◽  
Maomao Zeng ◽  
...  
Keyword(s):  
Antioxidant Capacity ◽  
Soy Protein ◽  
Average Particle Size ◽  
Soy Protein Isolate ◽  
Surface Hydrophobicity ◽  
Protein Isolate ◽  
Antagonistic Effect ◽  
Masking Effect ◽  
Average Particle

The interaction of soy protein isolate (SPI) and its hydrolysates (SPIHs) with cyanidin-3-O-glucoside (C3G) at pH 7.0 were investigated to clarify the changes in the antioxidant capacity of their complexes. The results of intrinsic fluorescence revealed that C3G binds to SPI/SPIHs mainly through hydrophobic interaction, and the binding affinity of SPI was stronger than that of SPIHs. Circular dichroism and Fourier-transform infrared spectroscopy analyses revealed that the interaction with C3G did not significantly change the secondary structures of SPI/SPIHs, while the surface hydrophobicity and average particle size of proteins decreased. Furthermore, the SPI/SPIHs-C3G interaction induced an antagonistic effect on the antioxidant capacity (ABTS and DPPH) of the complex system, with the masking effect on the ABTS scavenging capacity of the SPIHs-C3G complexes being lower than that of the SPI-C3G complexes. This study contributes to the design and development of functional beverages that are rich in hydrolysates and anthocyanins.

Enhanced oral bioavailability of nisoldipine-piperine-loaded poly-lactic-co-glycolic acid nanoparticles

2017 ◽  
Vol 6 (6) ◽  
pp. 517-526 ◽  
Author(s):  
Permender Rathee ◽  
Anjoo Kamboj ◽  
Shabir Sidhu
Keyword(s):  
Oral Bioavailability ◽  
Drug Loading ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Pharmacokinetic Interaction ◽  
Precipitation Method ◽  
Pharmacokinetic Studies ◽  
Average Particle

AbstractBackground:Piperine helps in the improvement of bioavailability through pharmacokinetic interaction by modulating metabolism when administered with other drugs. Nisoldipine is a substrate for cytochrome P4503A4 enzymes. The study was undertaken to assess the influence of piperine on the pharmacokinetics and pharmacodynamics of nisoldipine nanoparticles in rats.Methods:Optimization studies of nanoparticles were performed using Taguchi L9 orthogonal array, and the nanoparticles were formulated by the precipitation method. The influence of piperine and nanoparticles was evaluated by means of in vivo kinetic and dynamic studies by oral administration in rats.Results:The entrapment efficiency, drug loading, ζ potential, and average particle size of optimized nisoldipine-piperine nanoparticles was 89.77±1.06%, 13.6±0.56%, −26.5 mV, and 132±7.21 nm, respectively. The in vitro release in 0.1 n HCl and 6.8 pH phosphate buffer was 96.9±0.48% and 98.3±0.26%, respectively. Pharmacokinetic studies showed a 4.9-fold increase in oral bioavailability and a >28.376±1.32% reduction in systemic blood pressure by using nanoparticles as compared to control (nisoldipine suspension) in Wistar rats.Conclusion:The results revealed that piperine being an inhibitor of cytochrome P4503A4 enzymes enhanced the bioavailability of nisoldipine by 4.9-fold in nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document