Drag and Lift Characteristics of a Novel Elliptical-Bladed Savonius Rotor With Vent Augmenters

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Nur Alom ◽  
Ujjwal K. Saha
Keyword(s):  
Identical Condition ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Savonius Rotor ◽  
Bladed Rotor ◽  
Drag And Lift ◽  
Lift And Drag

Savonius rotor, a class of drag-driven vertical axis wind turbine, has been extensively investigated mainly to calculate the torque and power coefficients (CT and CP) by various investigators. Hitherto, studies related to lift and drag characteristics are very few and have mainly been restricted to a semicircular-bladed rotor. A deeper investigation into the drag and lift coefficients (CD and CL) can result in the better design of rotor blades leading to an increment in CT and CP. In view of this, in the present investigation, CD and CL of an elliptical-bladed rotor with vent augmenters have been studied numerically. Initially, two-dimensional (2D) unsteady simulations using an ansys fluent solver is carried out to estimate the instantaneous CD and CL. The shear stress transport (SST) k–ω turbulence model is selected to solve the Reynolds averaged Navier Stokes (RANS) equations. Finally, three-dimensional (3D) unsteady simulations are carried out for the vented elliptical-bladed rotor. The unsteady simulations are performed for the nonvented elliptical- and semicircular-bladed rotors at the identical condition in order to have a direct comparison. From the unsteady simulations, the average CD for the vented elliptical profile is found to be 1.45; whereas, the average CD for the nonvented elliptical and semicircular profiles is found to be 1.43 and 1.35, respectively.

scholarly journals CFD ANALYSIS OF THE AIR FLOW AROUND THE BLADES OF THE VERTICAL AXIS WIND TURBINE

2017 ◽  
Vol 3 (1) ◽  
pp. 1-7
Author(s):  
Muhammed Musab Gavgali ◽  
Zbigniew Czyż ◽  
Jacek Czarnigowski
Keyword(s):  
Wind Turbine ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Rotor Blades ◽  
Cfd Analysis ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Bladed Rotor ◽  
The Individual

The paper presents the results of calculations of flow around the vertical axis wind turbine. Three-dimensional calculations were performed using ANSYS Fluent. They were made at steady-state conditions for a wind speed of 3 m/s for 4 angular settings of the three-bladed rotor. The purpose of the calculations was to determine the values of the aerodynamic forces acting on the individual blades and to present the pressure contours on the surface of turbine rotor blades. The calculations were made for 4 rotor angular settings

Alternative Blade Profile based on Savonius Concept for Effective Wind Energy Harvesting

2021 ◽  
pp. 1-32
Author(s):  
Parag K. Talukdar ◽  
Nur Alom ◽  
Umang H. Rathod ◽  
Vinayak Kulkarni
Keyword(s):  
Vertical Axis ◽  
Rotor Blades ◽  
Power Coefficient ◽  
Potential Candidate ◽  
Blade Profile ◽  
Ansys Fluent ◽  
Pressure Distributions ◽  
Bladed Rotor ◽  
Identical Test ◽  
Experimental Findings

Abstract The drag-based vertical-axis Savonius wind rotor is a potential candidate for harvesting renewable energy. It is very simple in design and can be deployed as an off-the-grid electricity system in remote locations having no access to electricity. The present work aims to develop a novel blade profile for the Savonius rotor in order to improve its performance. In that connection, an arc-elliptical-blade profile has been developed and rotor performance has been assessed through wind tunnel testing at three different Reynolds numbers (Re = 87039, 107348, and 131066). Further, its performance is compared to that of a conventional semicircular-bladed rotor under identical test conditions. The experiments revealed the maximum power coefficient (CPmax) of 0.11, 0.162, 0.213 at Re = 87039, 107348, and 131066, respectively for the arc-elliptical-bladed rotor. To complement the experimental findings and to examine the flow behaviour around the rotor blades, the computational fluid dynamics (CFD) simulations have also been performed using ANSYS FLUENT software. The local torque is found to be greater around the advancing arc-elliptical blade than around the advancing semicircular blade. It has been also noticed that the pressure distributions over concave sides are similar regardless of the blade shape.

Simulation Study on the Performance of Vertical Axis Wind Turbine

2013 ◽  
Vol 465-466 ◽  
pp. 270-274 ◽  
Author(s):  
N. Afzanizam Samiran ◽  
A.A. Wahab ◽  
Mohd Sofian ◽  
N. Rosly
Keyword(s):  
Output Power ◽  
Flow Characteristic ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Navier Stokes ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Savonius Rotor ◽  
Torque Coefficient

The present study considered the design improvement of Savonius rotor, in order to increase the efficiency of output power. An investigation was conducted to study the effect of geometrical configuration on the performance of the rotor in terms of coefficient of torque, coefficient of power and power output. Modification of conventional geometry has been designed by combining the effect of number of blades and shielding method. CFD simulation was conducted to analyze the flow characteristic and calculate the torque coefficient of all the rotor configurations. The continuity and Reynolds Averaged Navier-Stokes (RANS) equations and realizable k-ε epsilon turbulence model are numerically solved by commercial software Ansys-Fluent 14.0. The results obtained by transient and steady method for the conventional two bladed Savonius rotor are in agreement with those obtained experimentally by other authors and this indicates that the methods can be successfully applied for such analysis. The modified 3 and 4 bladed rotors with hybrid shielding method gave the highest maximum power coefficient which 0.37 at TSR 0.5 and output power exceed 4 watts with rotor dimensions of 0.2m width and 0.2m height. This blade configuration also is the best configuration by several percentages compared to the other model from the previous study

Computational Studies on the Flow Field of Various Shapes-Bladed Vertical Axis Savonius Turbine in Static Condition

2013 ◽  
Author(s):  
Jobaidur Khan ◽  
Mohammad Mohibbul Bashar ◽  
Mosfequr Rahman
Keyword(s):  
Turbine Blades ◽  
Static Condition ◽  
Vertical Axis ◽  
Efficient Design ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Low Wind Speed ◽  
Computational Fluid Dynamics Cfd ◽  
Bladed Rotor ◽  
Near Future

Vertical Axis Wind Turbine (VAWT) is the least efficient conventional wind energy generator. But the inherent advantage of facing the wind direction and capability to operate in low wind speed and non-smooth wind flow regions are two main reasons to research on it and to find more efficient design. The simplest form of VAWT is known as Savonius turbine and difference of the drag force on its blades is the operating principal. The main objective of this study is to analyze the performance data (numerically obtained) Savonius turbine blades. This study is in preliminary stage; experiment will be performed in near future. A Computational Fluid Dynamics (CFD) analysis has been used. Effect of changing the inlet velocity and mesh dependency is observed in this study. These models are simulated with CFD software ANSYS/FLUENT. Comparing previous models it has been found that, airfoil shaped three bladed rotor produces better result than regular semi-circular wind turbines. Changing the airfoil shape may show more interesting result in future.

Comparison of Experimental and Numerically Predicted Three-Dimensional Wake Behaviour of a Vertical Axis Wind Turbine

2017 ◽  
Author(s):  
Joseph Saverin ◽  
David Marten ◽  
David Holst ◽  
George Pechlivanoglou ◽  
Christian Oliver Paschereit ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Large Scale ◽  
Computational Cost ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Tip Vortex ◽  
Vertical Axis Wind Turbine ◽  
Design And Optimization ◽  
Aerodynamic Model ◽  
Lift And Drag

The evolution of the wake of a wind turbine contributes significantly to its operation and performance, as well as to those of machines installed in the vicinity. The inherent unsteady and three-dimensional aerodynamics of Vertical Axis Wind Turbines (VAWT) have hitherto limited the research on wake evolution. In this paper the wakes of both a troposkien and a H-type VAWT rotor are investigated by comparing experiments and calculations. Experiments were carried out in the large-scale wind tunnel of the Politecnico di Milano, where unsteady velocity measurements in the wake were performed by means of hot wire anemometry. The geometry of the rotors was reconstructed in the open-source wind-turbine software QBlade, developed at the TU Berlin. The aerodynamic model makes use of a lifting line free-vortex wake (LLFVW) formulation, including an adapted Beddoes-Leishman unsteady aerodynamic model; airfoil polars are introduced to assign sectional lift and drag coefficients. A wake sensitivity analysis was carried out to maximize the reliability of wake predictions. The calculations are shown to reproduce several wake features observed in the experiments, including blade-tip vortex, dominant and submissive vortical structures, and periodic unsteadiness caused by sectional dynamic stall. The experimental assessment of the simulations illustrates that the LLFVW model is capable of predicting the unsteady wake development with very limited computational cost, thus making the model ideal for the design and optimization of VAWTs.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

scholarly journals A Fast Two-Dimensional Numerical Method for the Wake Simulation of a Vertical Axis Wind Turbine

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 49
Author(s):  
Zheng Yuan ◽  
Jin Jiang ◽  
Jun Zang ◽  
Qihu Sheng ◽  
Ke Sun ◽  
...  
Keyword(s):  
Velocity Distribution ◽  
Numerical Method ◽  
Three Dimensional ◽  
Particle Method ◽  
Vortex Method ◽  
Vertical Axis ◽  
Two Dimensional ◽  
Vertical Axis Wind Turbine ◽  
Wake Effect ◽  
Array Design

In the array design of the vertical axis wind turbines (VAWT), the wake effect of the upstream VAWT on the downstream VAWT needs to be considered. In order to simulate the velocity distribution of a VAWT wake rapidly, a new two-dimensional numerical method is proposed, which can make the array design easier and faster. In this new approach, the finite vortex method and vortex particle method are combined to simulate the generation and evolution of the vortex, respectively, the fast multipole method (FMM) is used to accelerate the calculation. Based on a characteristic of the VAWT wake, that is, the velocity distribution can be fitted into a power-law function, a new correction model is introduced to correct the three-dimensional effect of the VAWT wake. Finally, the simulation results can be approximated to the published experimental results in the first-order. As a new numerical method to simulate the complex VAWT wake, this paper proves the feasibility of the method and makes a preliminary validation. This method is not used to simulate the complex three-dimensional turbulent evolution but to simulate the velocity distribution quickly and relatively accurately, which meets the requirement for rapid simulation in the preliminary array design.

scholarly journals Effect of Pitch Parameters on Aerodynamic Forces of a Straight-Bladed Vertical Axis Wind Turbine with Inclined Pitch Axes

2021 ◽  
Vol 11 (3) ◽  
pp. 1033
Author(s):  
Jia Guo ◽  
Timing Qu ◽  
Liping Lei
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Incline Angle ◽  
Asymmetric Distribution ◽  
Vertical Axis Wind Turbine ◽  
Power Performance ◽  
Aerodynamic Forces ◽  
Ansys Fluent ◽  
Pitch Regulation

Pitch regulation plays a significant role in improving power performance and achieving output control in wind turbines. The present study focuses on a novel, pitch-regulated vertical axis wind turbine (VAWT) with inclined pitch axes. The effect of two pitch parameters (the fold angle and the incline angle) on the instantaneous aerodynamic forces and overall performance of a straight-bladed VAWT under a tip-speed ratio of 4 is investigated using an actuator line model, achieved in ANSYS Fluent software and validated by previous experimental results. The results demonstrate that the fold angle has an apparent influence on the angles of attack and forces of the blades, as well as the power output of the wind turbine. It is helpful to further study the dynamic pitch regulation and adaptable passive pitch regulation of VAWTs. Incline angles away from 90° lead to the asymmetric distribution of aerodynamic forces along the blade span, which results in an expected reduction of loads on the main shaft and the tower of VAWTs.

Sign in / Sign up

Export Citation Format

Share Document