scholarly journals Enhancement of Deep-Subwavelength Band Gaps in Flat Spiral-Based Phononic Metamaterials Using the Trampoline Phenomena

2020 ◽  
Vol 87 (7) ◽  
Author(s):  
Osama R. Bilal ◽  
André Foehr ◽  
Chiara Daraio
Keyword(s):  
Effective Properties ◽  
Band Gaps ◽  
Two Dimensional ◽  
Bragg Scattering ◽  
Acoustic Metamaterials ◽  
Resonance Frequencies ◽  
Unit Cells ◽  
Gap Opening ◽  
Operational Frequency ◽  
Flat Spiral

Abstract Elastic and acoustic metamaterials can sculpt dispersion of waves through resonances. In turn, resonances can give rise to negative effective properties, usually localized around the resonance frequencies, which support band gaps at subwavelength frequencies (i.e., below the Bragg-scattering limit). However, the band gaps width correlates strongly with the resonators’ mass and volume, which limits their functionality in applications. Trampoline phenomena have been numerically and experimentally shown to broaden the operational frequency ranges of two-dimensional, pillar-based metamaterials through perforation. In this work, we demonstrate trampoline phenomena in lightweight and planar lattices consisting of arrays of Archimedean spirals in unit cells. Spiral-based metamaterials have been shown to support different band gap opening mechanisms, namely, Bragg-scattering, local resonances and inertia amplification. Here, we numerically analyze and experimentally realize trampoline phenomena in planar metasurfaces for different lattice tessellations. Finally, we carry out a comparative study between trampoline pillars and spirals and show that trampoline spirals outperform the pillars in lightweight, compactness and operational bandwidth.

scholarly journals Two-Dimensional Composite Acoustic Metamaterials of Rectangular Unit Cell from Pentamode to Band Gap

Crystals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1457
Author(s):  
Qi Li ◽  
Ke Wu ◽  
Mingquan Zhang
Keyword(s):  
Wave Propagation ◽  
Acoustic Wave ◽  
Band Gap ◽  
Unit Cell ◽  
The Other ◽  
Two Dimensional ◽  
Acoustic Metamaterials ◽  
Acoustic Wave Propagation ◽  
Theoretical Support ◽  
Unit Cells

Pentamode metamaterials have been receiving an increasing amount of interest due to their water-like properties. In this paper, a two-dimensional composite pentamode metamaterial of rectangular unit cell is proposed. The unit cells can be classified into two groups, one with uniform arms and the other with non-uniform arms. Phononic band structures of the unit cells were calculated to derive their properties. The unit cells can be pentamode metamaterials that permit acoustic wave travelling or have a total band gap that impedes acoustic wave propagation by varying the structures. The influences of geometric parameters and materials of the composed elements on the effective velocities and anisotropy were analyzed. The metamaterials can be used for acoustic wave control under water. Simulations of materials with different unit cells were conducted to verify the calculated properties of the unit cells. The research provides theoretical support for applications of the pentamode metamaterials.

Tailoring of Two-Dimensional Band-Gap Materials for Broadband Frequency Isolation

2007 ◽  
Author(s):  
Mahmoud I. Hussein ◽  
Karim Hamza ◽  
Gregory M. Hulbert ◽  
Kazuhiro Saitou
Keyword(s):  
Band Gap ◽  
Vibration Isolation ◽  
Optimization Techniques ◽  
Band Gaps ◽  
Two Dimensional ◽  
Frequency Bandwidth ◽  
Periodic Composite ◽  
Unit Cells ◽  
Periodic Materials ◽  
Broadband Frequency

The spatial distribution of material phases within a periodic composite can be engineered to produce band gaps in its frequency spectrum. Applications for such composite materials include vibration and sound isolation. Previous research focused on utilizing topology optimization techniques to design two-dimensional periodic materials with a maximized band gap around a particular frequency or between two particular dispersion branches. While sizable band gaps can be realized, the possibility remains that the frequency bandwidth of the load that is to be isolated might significantly exceed the size of the band gap. In this paper, genetic algorithms are used to design squared bi-material unit cells with a maximized sum of relative band-gap widths over a prescribed frequency range of interest. The optimized unit cells therefore exhibit broadband frequency isolation characteristics. The effects of the ratios of contrasting material properties are also studied. The designed cells are subsequently used, with varying levels of material damping, to form a finite vibration isolation structure, which is subjected to broadband loading conditions. Excellent isolation properties of the synthesized material are demonstrated for this structure.

Research on the band gaps of the two-dimensional Sierpinski fractal phononic crystals

2015 ◽  
Vol 29 (23) ◽  
pp. 1550134 ◽  
Author(s):  
Nansha Gao ◽  
Jiu Hui Wu ◽  
Li Jing
Keyword(s):  
Rotation Angle ◽  
Low Frequency ◽  
Phononic Crystals ◽  
Band Gaps ◽  
Transmission Spectra ◽  
Two Dimensional ◽  
Bragg Scattering ◽  
Frequency Range ◽  
Displacement Fields ◽  
First Time

In this paper, we study the band gaps (BGs) of the two-dimensional (2D) Sierpinski fractal phononic crystals (SFPGs) embedded in the homogenous matrix. The BGs structure, transmission spectra and displacement fields of eigenmodes of the proposed structures are calculated by using finite element method (FEM). Due to the simultaneous mechanisms of the Bragg scattering, the structure can exhibit low-frequency BGs, which can be effectively shifted by changing the inclusion rotation angle. The initial stress values can compress the BGs is proposed for the first time. Through the calculation, it is shown that, in the 2D solid–solid SFPG, the multi-frequency BGs exist. The whole BGs would incline to the low-frequency range with the increase of the fractal dimension. The SFPGs with different shape inclusions, can modulate the number, width and location of BGs. The study in this paper is relevant to the design of tuning BGs and isolators in the low-frequency range.

Correlation averaging of two-dimensional crystals: basic strategy and refinements

1986 ◽  
Vol 44 ◽  
pp. 136-139
Author(s):  
W. Baumeister ◽  
R. Rachel ◽  
R. Guckenberger ◽  
R. Hegerl
Keyword(s):  
Low Dose ◽  
Signal To Noise Ratio ◽  
Real Space ◽  
Fourier Domain ◽  
Two Dimensional ◽  
Signal To Noise ◽  
Unit Cells ◽  
Lateral Displacements ◽  
Established Technique ◽  
Crystalline Array

IntroductionCorrelation averaging (CAV) is meanwhile an established technique in image processing of two-dimensional crystals /1,2/. The basic idea is to detect the real positions of unit cells in a crystalline array by means of correlation functions and to average them by real space superposition of the aligned motifs. The signal-to-noise ratio improves in proportion to the number of motifs included in the average. Unlike filtering in the Fourier domain, CAV corrects for lateral displacements of the unit cells; thus it avoids the loss of resolution entailed by these distortions in the conventional approach. Here we report on some variants of the method, aimed at retrieving a maximum of information from images with very low signal-to-noise ratios (low dose microscopy of unstained or lightly stained specimens) while keeping the procedure economical.

scholarly journals Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells

Technologies ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 12
Author(s):  
Federico J. Sabina ◽  
Yoanh Espinosa-Almeyda ◽  
Raúl Guinovart-Díaz ◽  
Reinaldo Rodríguez-Ramos ◽  
Héctor Camacho-Montes
Keyword(s):  
Effective Properties ◽  
Elastic Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Effective Coefficients ◽  
Three Phase ◽  
Out Of Plane ◽  
Local Problems ◽  
Unit Cells

The development of micromechanical models to predict the effective properties of multiphase composites is important for the design and optimization of new materials, as well as to improve our understanding about the structure–properties relationship. In this work, the two-scale asymptotic homogenization method (AHM) is implemented to calculate the out-of-plane effective complex-value properties of periodic three-phase elastic fiber-reinforced composites (FRCs) with parallelogram unit cells. Matrix and inclusions materials have complex-valued properties. Closed analytical expressions for the local problems and the out-of-plane shear effective coefficients are given. The solution of the homogenized local problems is found using potential theory. Numerical results are reported and comparisons with data reported in the literature are shown. Good agreements are obtained. In addition, the effects of fiber volume fractions and spatial fiber distribution on the complex effective elastic properties are analyzed. An analysis of the shear effective properties enhancement is also studied for three-phase FRCs.

scholarly journals Single crystal of two-dimensional mixed-halide copper-based perovskites with reversible thermochromism

2021 ◽  
Author(s):  
Amr Elattar ◽  
Hiroo Suzuki ◽  
Ryuji Mishima ◽  
Kodai Nakao ◽  
Hiromi Ota ◽  
...  
Keyword(s):  
Single Crystal ◽  
Band Gaps ◽  
Two Dimensional ◽  
Facile Synthesis ◽  
Reversible Thermochromism

Facile synthesis of single crystal of two-dimensional mixed-halide copper-based perovskites with tunable band gaps and their capability of exfoliation and reversible thermochromism.

MODIFICATION OF CASIMIR FORCES DUE TO BAND GAPS IN PERIODIC STRUCTURES

2002 ◽  
Vol 17 (06n07) ◽  
pp. 798-803 ◽  
Author(s):  
C. VILLARREAL ◽  
R. ESQUIVEL-SIRVENT ◽  
G. H. COCOLETZI
Keyword(s):  
Density Of States ◽  
Casimir Force ◽  
Periodic Structures ◽  
Local Density ◽  
Band Gaps ◽  
Basic Unit ◽  
Local Density Of States ◽  
Casimir Forces ◽  
Unit Cells ◽  
The Difference

The Casimir force between inhomogeneous slabs that exhibit a band-like structure is calculated. The slabs are made of basic unit cells each made of two layers of different materials. As the number of unit cells increases the Casimir force between the slabs changes, since the reflectivity develops a band-like structure characterized by frequency regions of high reflectivity. This is also evident in the difference of the local density of states between free and boundary distorted vacuum, that becomes maximum at frequencies corresponding to the band gaps. The calculations are restricted to vacuum modes with wave vectors perpendicular to the slabs.

Sign in / Sign up

Export Citation Format

Share Document